was running bamf 1.8.6 with launcherpro plus. just flashed this rom - [ROM][07.13.11] Liquid Thunderbread v2.3 Release which is preloaded with launcherpro (but not the plus version). restored my version of LauncherPro Plus from the bamf install with data via titanium backup. now i'm stuck. don't think thunderbread liked the restore.
now i have very limited functionality. i have access to the notification bar. but that's about it. the the power button is not functioning to either power the phone down or reboot into recovery. the hard buttons on the bottom of the phone aren't functioning and have no way to access anything. i basically have a black screen.
**** EDIT ****
ended up having to use ADB to boot into recovery and re-flash thunderbread.
thanks
mark
Related
Hi guys,
I am new to the XDA forums so forgive me if this is really stupid or if someone has posted the same problems. I searched for an answer but couldn't seem to find someone with my problem. Forgive me if this is long. I just want to make sure you guys know all the details so we can figure out what went wrong.
I recently flashed the Evil Fascination 3.6 Rom from a modified stock version of ED04 (debloated/debinged). I believe that my version of CWM recovery was 2.5.1 or something like that (w/ voodoo lagfix). I am pretty new to the Android world but I do believe I did everything correctly. I wiped Cache and Dalvik Cache and Data multiple times and made nandroid backups etc.
I flashed the Rom with no problems and everything worked just fine. I was trying out Regina 3D launcher at the time (I regularly use Launcher Pro), and for some reason it seemed a little slow to load up (I figured it had to do with it being the first time with the new rom). I kept having loadup problems with the launcher so I uninstalled it and went back to Launcher Pro. Launcher Pro even seemed like it was acting weird but I didn't take much notice to it.
Now yesterday I downloaded the OTB 1.6 Touchwiz kernel. Everything I've read said it was compatable with Evil Fascination. I tried to flash it from CWM recovery and it didn't work. My phone stayed stuck on the Evil Fascination boot up screen and finally I just popped the battery out. I went back into CWM and just wiped everything and reflashed Evil Fascination. It seemed to work fine with Launcher Pro (again a little glitchy at times, but I took no notice really).
I again tried to flash the OTB 1.6 kernel. This time instead of doing it from the recovery I downloaded an app called SGS kernel flasher. I did what it said and it flashed the kernel for me with no boot up problems like CWM did. I rebooted and then booted into CWM to check it and it was changed from version 2.5.1 (voodoo) to 3.2.0.0.otb. I figured this meant that the kernel flash was sucessful. I went to reboot my phone and when the home screen came on it was a froyo style launcher with only 2 or three icons on the page. I pressed the app drawer and none of my apps showed up that were on my sd card. finally i pressed the home button and it asked for which launcher to choose : LauncherPro or the default and I chose LauncherPro. My regular setup appeared and my apps were in the app drawer. I found it weird that my apps showed in LauncherPro but not in the default launcher.
Now with doing phone reboots my phone always goes to the default launcher with no apps from my sd card and I have to wait to press the home button for LauncherPro to appear. I set it as my default launcher but it never loads when my phone is rebooted.
I was just recently (within the last hour) doing regular things on my phone (texting, internet , email etc) ad all of a sudden I got the shut down boot animation from my rom and my phone turned off. I went to turn it back on and my phone stayed stuck on the boot screen again. Now you can figure what I did again. I went through and did everything over and reloaded the rom and kernel. I am still having the same problems with the launcher as I did before and I have no idea whats going on. I just want to avoid going through this again. Anyone have any idea what the heck is going on???
If I were to guess I would say your problems comes from trying to flash the otb kernel with a 2.x.x.x recovery..i don't believe that recovery supports edify scripting.....i would odin a 3.x.x.x recovery and re flash the otb kernel...and I don't know much about that app you are referring to, but I wouldn't use a market app to try to install a kernel unless specifically directed to in the author's o.p.
I'm not a dev..just a flash-a-holic! but I think that should help your problem
Sent from my SCH-I500 using XDA App
I'm also no expert but after running into constant force closes and random problems with launcherpro I decided to go with go launcher and its been a great switch for me.
Sent from my SCH-I500 using XDA Premium App
Hey guys, still no luck. I don't know what it is. I wish I knew more about hacking and doing all this kind of stuff
Try flashing a PBJ kernel!
can you get into CWM with the three finger salute?
[hold down the two volume buttons and the power until your phone reboots and you see samsung then let go]
See if you can mount as usb to get the kernel on there, if that doesnt work go to staples get a microsd card reader [under $15] and toss the pbj on your card then flash that.
When i was on EF and Comm Rom my phone didnt like the OTB kernels
Good Luck!
My recovery menu works fine and I can boot into it from the ROM without problem. My problem is that when I reboot the phone the ROM's default launcher is setup (and it is missing all of my apps) even though I set Launcher Pro as my default. I have to reset all my defaults in Launcher Pro every time my phone is turned off or rebooted. I would be on PB&J but I like to overclock my phone and PB&J doesn't support voltage control and I don't want to pay for and overclocking app.
efan450 said:
If I were to guess I would say your problems comes from trying to flash the otb kernel with a 2.x.x.x recovery..i don't believe that recovery supports edify scripting.....i would odin a 3.x.x.x recovery and re flash the otb kernel...and I don't know much about that app you are referring to, but I wouldn't use a market app to try to install a kernel unless specifically directed to in the author's o.p.
I'm not a dev..just a flash-a-holic! but I think that should help your problem
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
From what I've read many people have disagreements on whether 2.5 supports Edify or not....because a lot of people have success with it while others don't so I really don't know. Its never given me problems in the past. I actually had more problems with 3.X recoveries (It wouldn't allow me to make nandroid backups and other things that were essential) so I flashed 2.5 and it worked perfect (again I've read about people having the same problems with 3.0 versions of CWM).
Okay what I've found is that this has nothing to do with Launcher Pro. I downloaded He Launcher and when I reboot my phone everytime it asks me to pick a default launcher. And when I'm using He Launcher, none of the apps on my SD card show up in the app drawer (they don't show up in the default ROM launcher either, they only show up in launcher pro)
Efan450 I tried what you said and it worked! I odined a 3.X recovery and wiped everything oof my phone then flashed the ROM and kernel and everything is working perfectly now. Thank you very much!!!
Ooookay, So, I've been working with the Evo 4G for awhile and I am pretty familiar w android.
Here is my situation
Installed Bonsai about a week ago, not bad.
Saw the TouchWiz update/rom Installed that (just now)
Did not like touchwiz.
Attempted to go back to Bonsai.
Now when I boot up, the launcher CONTINUOUSLY crashes, so i am unable to do anything at all.
How do I fix it? I just want it to be basic Rooted Bonsai again.
(P.S. Was just now lucky enough to get into the settings before it all crashed again)
How did you go back to bonsai? Fresh install, backup, restore or write over? Did you wipe before? Clear your cache(s)?
I NEED HELP!
Backstory: I was on Abberation rom 1.2 and it had worked perfectly. When I installed version 1.0 it used the AROMA installer and allowed me to pick a launcher. I chose Apex launcher but I didn't install any other launchers. Superuser worked fine and it had run buttery smooth. Aberration runs Siyah kernel.
The issue: Alright, so today I was listening to music and suddenly my phone turns off. I literally was listening to music and that's it. I rebooted it and it told said "please wait android is updating" and that only happens when I flash a new kernel...which is impossible since I don't even have mobile odin installed. Then, Then it said "unfortunately, apex launcher has closed" and it would keep repeating that message, meaning I had no actual launcher to run anything from. I installed launcher pro over the air via the play store desktop version from my computer. It downloaded but wouldn't run. I got a text from my friend and the messaging app worked fine, I could text him and everything so there was nothing wrong there. Then I get home and let it charge (since it was dead). I return later and see that the battery icon that pops up when its charging and the phone is off has a loading icon on it, but it doesn't actually show the battery level. I tried to boot up, but it wouldn't. It would show a blank screen and then go back to the battery icon with a loading symbol on it. Eventually I tried to go to CWM via the three button combo and I ended up with the stock 3E recovery. I am utterly confused and need some serious help from you guys. I didn't do anything so is it the ROM's fault?
Note: I have had experience in flashing ROMs and I have done extensive research on trying to fix this. I've never seen this happen before. Did it somehow revert back to the stock kernel while it ran Aberration?
Thanks for any support or instructions you can give me. I was thinking about using creepyncrawly's instruction to unroot to stock, but it only works for gingerbread and I'm on ice cream sandwich.
shadowskorch said:
I NEED HELP!
Backstory: I was on Abberation rom 1.2 and it had worked perfectly. When I installed version 1.0 it used the AROMA installer and allowed me to pick a launcher. I chose Apex launcher but I didn't install any other launchers. Superuser worked fine and it had run buttery smooth. Aberration runs Siyah kernel.
The issue: Alright, so today I was listening to music and suddenly my phone turns off. I literally was listening to music and that's it. I rebooted it and it told said "please wait android is updating" and that only happens when I flash a new kernel...which is impossible since I don't even have mobile odin installed. Then, Then it said "unfortunately, apex launcher has closed" and it would keep repeating that message, meaning I had no actual launcher to run anything from. I installed launcher pro over the air via the play store desktop version from my computer. It downloaded but wouldn't run. I got a text from my friend and the messaging app worked fine, I could text him and everything so there was nothing wrong there. Then I get home and let it charge (since it was dead). I return later and see that the battery icon that pops up when its charging and the phone is off has a loading icon on it, but it doesn't actually show the battery level. I tried to boot up, but it wouldn't. It would show a blank screen and then go back to the battery icon with a loading symbol on it. Eventually I tried to go to CWM via the three button combo and I ended up with the stock 3E recovery. I am utterly confused and need some serious help from you guys. I didn't do anything so is it the ROM's fault?
Note: I have had experience in flashing ROMs and I have done extensive research on trying to fix this. I've never seen this happen before. Did it somehow revert back to the stock kernel while it ran Aberration?
Thanks for any support or instructions you can give me. I was thinking about using creepyncrawly's instruction to unroot to stock, but it only works for gingerbread and I'm on ice cream sandwich.
Click to expand...
Click to collapse
If you have 3e recovery, then I suppose you have the stock kernel. I have no clue how you would have 3e recovery any other way.
I would suggest you flash back to stock and start over. It doesn't matter that you flash back to Gingerbread, because you will install a custom Gingerbread kernel and then flash whatever you want. I would suggest that you use UCKH7 plus root, and then put a Gingerbread kernel on it. Oh, and just in case, do the wipe data/factory reset in 3e recovery after you flash UCKH7, just in case, you know.
Hi, I apparently don't have access rights to post in the dev thread yet. I've unlocked/rooted w/ Hasoon's AIO kit (thanks!).
Since have installed the Elegancia 2.2 ROM and got stuck flashing the Rosie menu button remap in the TWRP recovery image.
http://forum.xda-developers.com/showthread.php?t=2025092
I have installed a couple of times now, and wiped cache and davlik cache to no avail.
Any ideas how to get a remap of the menu buttons to I can get to program settings in my apps?
Thanks.
Hi cuhead,
During the Elegancia Aroma installation you were asked to pick up (or not) the menu option (that removes the 3 dots). So you have to select it.
Then go to Elegancia Add-ons where you will find Rosie mods. Select the one you like/want: landscape capable with oe without menu, etc...
Then go to Settings, gestures and buttons, button recent application and select the option in the middle.
cuhead528 said:
Hi, I apparently don't have access rights to post in the dev thread yet. I've unlocked/rooted w/ Hasoon's AIO kit (thanks!).
Since have installed the Elegancia 2.2 ROM and got stuck flashing the Rosie menu button remap in the TWRP recovery image.
http://forum.xda-developers.com/showthread.php?t=2025092
I have installed a couple of times now, and wiped cache and davlik cache to no avail.
Any ideas how to get a remap of the menu buttons to I can get to program settings in my apps?
Thanks.
Click to expand...
Click to collapse
Steve - thanks. As it turned out I did have the install files loaded correctly, didn't realize the gesture button settings in the OS.
All works well now.
Thanks again, case closed.
Sent from my Transformer Prime TF201 using Tapatalk 2
Hi,
I have a Galaxy S3 i9300 currently running CM10.1. I just tried to flash Slim Bean 2.2 on my S3 as that's the only download available. However after flashing the ROM and G-Apps in CWM, when I boot the phone gets stuck at where the setup menu should be. Like when it should ask for Wi-Fi password etc, it just shows a black screen but the notification bar is there and working. At first nothing would work, but after a cache wipe, it said Android is upgrading (54 apps) but was still a black screen. However I could access settings and change anything I wanted, but the home button wouldn't take me to home screen. I print screened to try get to home through the gallery but the button still doesn't work. I booted without G-Apps to see if that was the cause and same problem. I have wiped everything and reflashed several times, still doesn't work. I have to flash through my external SD because when I put the .zip on my internal they don't show up in CWM. I am back on CM10.1 from a backup however I would much rather Slim Bean as I can tell from my "demo" access to it, it seems far far smoother. How can I fix the issue so I can use it?
Thanks
JesseBeckett said:
Hi,
I have a Galaxy S3 i9300 currently running CM10.1. I just tried to flash Slim Bean 2.2 on my S3 as that's the only download available. However after flashing the ROM and G-Apps in CWM, when I boot the phone gets stuck at where the setup menu should be. Like when it should ask for Wi-Fi password etc, it just shows a black screen but the notification bar is there and working. At first nothing would work, but after a cache wipe, it said Android is upgrading (54 apps) but was still a black screen. However I could access settings and change anything I wanted, but the home button wouldn't take me to home screen. I print screened to try get to home through the gallery but the button still doesn't work. I booted without G-Apps to see if that was the cause and same problem. I have wiped everything and reflashed several times, still doesn't work. I have to flash through my external SD because when I put the .zip on my internal they don't show up in CWM. I am back on CM10.1 from a backup however I would much rather Slim Bean as I can tell from my "demo" access to it, it seems far far smoother. How can I fix the issue so I can use it?
Thanks
Click to expand...
Click to collapse
Could be a long way off here, but are you sure the download wasn't corrupted, a statusbar and black screen sounds to me like the launcher wasn't opening, or wasn't flashed.
Also what version of CWM are you using? I would download rom manager and flash the latest version, then try flashing slim again.
JesseBeckett said:
Hi,
I have a Galaxy S3 i9300 currently running CM10.1. I just tried to flash Slim Bean 2.2 on my S3 as that's the only download available. However after flashing the ROM and G-Apps in CWM, when I boot the phone gets stuck at where the setup menu should be. Like when it should ask for Wi-Fi password etc, it just shows a black screen but the notification bar is there and working. At first nothing would work, but after a cache wipe, it said Android is upgrading (54 apps) but was still a black screen. However I could access settings and change anything I wanted, but the home button wouldn't take me to home screen. I print screened to try get to home through the gallery but the button still doesn't work. I booted without G-Apps to see if that was the cause and same problem. I have wiped everything and reflashed several times, still doesn't work. I have to flash through my external SD because when I put the .zip on my internal they don't show up in CWM. I am back on CM10.1 from a backup however I would much rather Slim Bean as I can tell from my "demo" access to it, it seems far far smoother. How can I fix the issue so I can use it?
Thanks
Click to expand...
Click to collapse
First of all, the newest version of Slim Bean available for the S3 is 3.1, which you can download here:
http://www.slimroms.net/index.php/downloads/all/viewcategory/152-i9300
I would suggest doing a full wipe and installing this (much newer) version... I'm using it and it's awesome. Hope this helps.
Wrong section, post in QA
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator