hello guys
i am new to android OS...that means a n00b... but i have successfully root my phone with this kernel http://forum.xda-developers.com/showthread.php?t=1075278
currently Kies gives me this info:
Current firmware version: PDA:KE2 / PHONE:KE2 / CSC:KD1 (VNO)
Baseband ver: I9100UHKE2
Kernel version: 2.6.35.7-I9100XWKE2-CL187606 [email protected] #2
Android ver: 2.3.3
Build number: GINGERBREAD.UHKE2
what i would like to do now is to update to the latest firmware is that possible?
thanks
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
bracketb4d said:
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
DM-Man said:
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Click to expand...
Click to collapse
Hi DM-Man,
As far as I know there is no official update for any Chilean device.
The only way to enjoy other versions is as already said to "manually" change via odin.
The "Chile thread" can be found here: http://forum.xda-developers.com/showthread.php?t=1104410
Best regards.
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
can you assist me as to summarize which kernel & rom i will need if i update it manually?
DM-Man said:
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
Click to expand...
Click to collapse
You can always update through Odin and get the latest software from e.g. Intratech's ROM thread. Carriers usually do not update that frequently and you may be stuck a long time to a version.
If you want to use the Chilean CSC then you have either the old seldom updateable official ROM option or you have an always manually updateable "Frankenstein" ROM option.
Related
How do i unroot my Galaxy S2 and make it like it was from the box?
Flash back the original firmware or as near to it as you can find .
jje
Where do i get the original firmware? Is this it: http://forum.xda-developers.com/showthread.php?t=1075278 Or is that just a kernel?
There is firmware there aswell. Its the "big file" of about 300mb.. Not the small kernel.
I'm sorry...but all i can see is the unsecure kernels and stock kernels but not 'original firmware'. Please advise...i apologise if it's there and i'm just missing it but i've looked.
Original firmware you saved it ???
Or
http://forum.xda-developers.com/showthread.php?t=1057535
http://forum.xda-developers.com/showthread.php?t=1075278
jje
No i didn't save the original firmware. So do i flash back stock kernel 7 from http://forum.xda-developers.com/showthread.php?t=1075278 ?
Ok sorry, ignore my above post i have found orginal...so i do i just flash it back using Odin? Download mode, click PDA, click on the file and then hit start? Also, my phone came with Ke1 so is it ok if i do KE7 orginal?
Could someone just confirm the procedures of how to flash back orginal stock in order to unroot?
Sent from my GT-I9100 using XDA App
AS per the instructions posted .
http://forum.xda-developers.com/showthread.php?t=1075278
Flash complete firmware through Odin as PDA is the usual .
jje
JJEgan said:
AS per the instructions posted .
http://forum.xda-developers.com/showthread.php?t=1075278
Flash complete firmware through Odin as PDA is the usual .
jje
Click to expand...
Click to collapse
Hi, i also a new user of S2... by the way, is it the same method to upgrade/downgrade android ?
let say i using the Odin method to upgrade my android version from 2.3.3 to 2.3.4
and
downgrade from 2.3.4 to 2.3.3 is the same method?
select pda,phone,csc file in 'download mode' then click start?
Upgrade downgrade stock roms instructions as per post.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
Upgrade downgrade stock roms instructions as per post.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
thx for replying, but i still not very clear about that..
let say i got a friend which updated via KIES, his android version is 2.3.3, XWKF3...
but my current android version is 2.3.4, XXKG3... (Malaysia)
So, i have to download -->
'' XWKF1
Firmware info
PDA:XWKF1
PHONE: DXKF1
Date: 04/06/2011
OLB (GLB, MM1, STH, SMA, SIN, XME, XSP, XTC, XTE): http://www.multiupload.com/U95BI5QVDL
XWKF1 Stock Kernel: http://www.multiupload.com/3H6NHN3PRO ''
Password: [email protected]
Thx~
Hello,
I am brand new here and just got my S2, which I would like to root. I have read the post from Chainfire. My question now is:
My base version is I9100BOKD1
Buidl. GINGERBREAD.BOKE4
Kernel 2.6.35.7-9100BOKE4-CL-188639root DELL102#2
Can I use the XWKDD_insecure.tar for rooting or do I need another version. Would an upgrade by Samsung to a newer version still be possible?
Hope some can help me on this, not willing to brick it!
Thanks in advance
you definitely can use this kernel for rooting, just flash back your stock kernel afterwards!
Sent from my GT-I9100 using XDA Premium App
Teddybear2 said:
Would an upgrade by Samsung to a newer version still be possible?
Click to expand...
Click to collapse
That's an interesting question for me, as well. Should an update come out, how can I apply it, since my phone is rooted?
you can always flash new fw versions with ODIN
Sent from my GT-I9100 using XDA Premium App
damascato said:
That's an interesting question for me, as well. Should an update come out, how can I apply it, since my phone is rooted?
Click to expand...
Click to collapse
Update depends upon the product code on the phone .
for updates via Kies or flash generic via Odin .
jje
TML1504 said:
you definitely can use this kernel for rooting, just flash back your stock kernel afterwards!
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks for the answer. Where do I get the stock kernel from? Is it possible to backup it from the device.
I read that I would need the adb driver for my phone. I have KIES installed and I am able to get on the phone via MyPhoneExplorer. However, KIES does not work. Where do I get the adb driver from? Uninstall and reinstall KIES? Thanks anyway for the quick response!
Teddybear2 said:
Thanks for the answer. Where do I get the stock kernel from? Is it possible to backup it from the device.
I read that I would need the adb driver for my phone. I have KIES installed and I am able to get on the phone via MyPhoneExplorer. However, KIES does not work. Where do I get the adb driver from? Uninstall and reinstall KIES? Thanks anyway for the quick response!
Click to expand...
Click to collapse
welcome
regarding adb drivers: install the android sdk or search in google for a suitable driver, you definitely will find one!
regarding stock kernel take a look here
TML1504 said:
welcome
regarding adb drivers: install the android sdk or search in google for a suitable driver, you definitely will find one!
regarding stock kernel take a look here
Click to expand...
Click to collapse
So essentially for my version I would need the KE4? right?
I already rooted SonyEricsson Xperia X10 and X10mini, so this should not be a problem. I just want to make sure to have the right stuff in place and not to brick it. Thanks again!
No KE7 should work it has KE4 modem baseband .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
JJEgan said:
No KE7 should work it has KE4 modem baseband .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
In terms of the adb driver ( I use WIN XP SP3), do I need to see it. I am able to connect to the internal SD Card. So does it work then?
Teddybear2 said:
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
No i saide KE7 should work
KE4 is not firmware its the modem if you are reading . = Baseband
KE7 Build KE4 Baseband is what about phone reads .
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
No you have no longer got the firmware that goes with the phone so it cannot find correct codes .
ABD no idea never us it .
jje
Click to expand...
Click to collapse
JJEgan said:
Teddybear2 said:
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
No i saide KE7 should work
KE4 is not firmware its the modem if you are reading . = Baseband
KE7 Build KE4 Baseband is what about phone reads .
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
No you have no longer got the firmware that goes with the phone so it cannot find correct codes .
ABD no idea never us it .
jje
Click to expand...
Click to collapse
Thanks. As I am a Newbie I jsut need little advice.
I finally managed to connect with KIES by simply disabling UBS debugging. Now I have what is rquired to know:
PDA: KE4
Phone KD1
CSC KE4 (DTM).
So I suspect I could take the KE4 from here:
http://forum.xda-developers.com/showthread.php?t=1101671
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
You would advice to take KE7?
Click to expand...
Click to collapse
Could someone help me with this please!
Teddybear2 said:
JJEgan said:
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
Ke7 is now superseded for some by KE8
Modem in KE7 is KE4 .
Once you move to stock rom you may lose your update path through Kies .
You have posted
PDA: KE4 older firmware than KE7
Phone KD1 Older Modem than KE4
CSC KE4 (DTM).
But the Kies update path will always be open if you update via Kies from original firmware even if its much later for updates than flashing stock rom via Odin .
Path for firmware is Samsung build stock rom its then passed to the network /providers for testing and customisation they then send to Kies . Kies matches original firmware product codes etc finds a matching update and downloads .
jje
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JJEgan said:
Teddybear2 said:
JJEgan said:
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
Ke7 is now superseded for some by KE8
Modem in KE7 is KE4 .
Once you move to stock rom you may lose your update path through Kies .
You have posted
PDA: KE4 older firmware than KE7
Phone KD1 Older Modem than KE4
CSC KE4 (DTM).
But the Kies update path will always be open if you update via Kies from original firmware even if its much later for updates than flashing stock rom via Odin .
Path for firmware is Samsung build stock rom its then passed to the network /providers for testing and customisation they then send to Kies . Kies matches original firmware product codes etc finds a matching update and downloads .
jje
Click to expand...
Click to collapse
That helps! Thank you!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
is it possible to root without kies? i have a mac and a 5 year old laptop.
I have tried numerous time to install kies but time and again it just get's stuck on "installing software" i waited for housing and it didn't do a thing.
can you use the odin/oneclickmethod without the need of kies? thanks
Did I figure it out I new also and I started to read chainfire procedure and but my problem is what kernel drive should I use .*
My kernel version currently is 2.6.35.7 - i9100 MUGKG2 - CL37 1789dhl 130.yoo @ sep-48 #2
Did I figure it out I new also and I started to read chainfire procedure and but my problem is what kernel drive should I use .*
My kernel version currently is 2.6.35.7 - i9100 MUGKG2 - CL37 1789dhl 130.yoo @ sep-48 #2
Click to expand...
Click to collapse
where are you from ?? which language you need ?? which Android Version you have (2.3.3. or 2.3.4)
MUG ???
MUGKG2 is from Canada droid version 2.3.3 if im not mistaken.
can i grab the original kernal files off you by any chance op?
MUGKG2 2.3.3? Thanks
UHKG7
Firmware info
PDA:UHKG7
PHONE:UHKG4
Build date: 27/07/2011
Android 2.3.4
VNO, TDR, TTT: http://www.multiupload.com/PBGWY6EN58
TPA (Costa Rica I think): http://www.multiupload.com/V1OJ9W6PXS
UHKG7 Stock Kernel: http://www.multiupload.com/NU4TIWYETE
Password: [email protected]
and do i download the file for, VNO, TDR, TTT?
also do i need to flash the kernal as well or is that just for rooting?
I am on a three, but unlocked contract phone, UK
pics of phone info attached
thanks for help
or is this one better?
I9100XXKG5 2.3.4 2011 August 2 CSC = XEUKG5, from samfirmware
KG7 is later than KG 5 your choice or read the KG5/7 posts in the stock rom thread .
jje
JJEgan said:
KG7 is later than KG 5 your choice or read the KG5/7 posts in the stock rom thread .
jje
Click to expand...
Click to collapse
So for the KG7 do I download the VNO, TDR and TTT file and flash it under PDA in odin?
So for the KG7 do I download the VNO, TDR and TTT file and flash it under PDA in odin?[
Click to expand...
Click to collapse
VNO is a csc file and you would use the csc button in Odin.
you only need to use the csc if you need the network settings for your country.
So what one do I flash to update my phone from its current 2.3.3 firmware to 2.3.4?
Are you trying to update your firmware or your kernel .
Firmware is here stock Samsung follow the instructions .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
Are you trying to update your firmware or your kernel .
Firmware is here stock Samsung follow the instructions .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Well probably both, so firmware I flash using the pda option and then how do I upgrade kernel?
nraman1 said:
Well probably both, so firmware I flash using the pda option and then how do I upgrade kernel?
Click to expand...
Click to collapse
Go to the first post of the link jjegan posted. It has instructions and pictures.
Sent from my GT-P1000 using xda premium
Ok thanks for your help
My phone is not rooted but was unlocked and used a guide off here to unbrand it which i did it has 2.3.4 on but it seems there's been a update to 2,3,5 and i haven't had it, could this be down to flashing a stock UK sim free image. I cant remember if ive had a update with this configuration i may of done but it seems weird i haven't received this update.
Baseband version
I9100XXKernel ver
2.6.6.35.7-I9100XWKI4
[email protected]#2
Build number GINGERBREAD.XWKI4
Are these this the right information for a sock sim free SGS2
cheers
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
polly69 said:
Build number GINGERBREAD.XWKI4
Are these this the right information for a sock sim free SGS2
cheers
Click to expand...
Click to collapse
"Yes" "No" "Maybe"
Consult this thread for ALL Samsung firmwares available for the SGSII.
Consult this thread for carrier branded firmwares.
You may, or currently may not have an upgrade for your region/carrier/etc....
Consult Galaxy S II General to see what firmware people are buzzing about currently.
if I download this will this take me back to 2.3.3 generic and do I do this using Odin, sorry I'm a pain but I'm new to this and can't get the answer I'm looking for I want to know if as a generic unbranded phone should I have got a 2.3.5 update with kies, if yes where can I get a 2.3.5 stock UK rom.
XWKE2
Firmware info PDA:XWKE2 PHONE: XXKDJ
Build date: 06/05/2011
polly69 said:
if I download this will this take me back to 2.3.3 generic and do I do this using Odin, sorry I'm a pain but I'm new to this and can't get the answer I'm looking for I want to know if as a generic unbranded phone should I have got a 2.3.5 update with kies, if yes where can I get a 2.3.5 stock UK rom.
XWKE2
Firmware info PDA:XWKE2 PHONE: XXKDJ
Build date: 06/05/2011
Click to expand...
Click to collapse
Follow the instructions on the first pages .
If KE3 is 2.3.3 then that's what you get .
Update no that depends upon your phones codes matching codes on the Kies server .
You get a 2.3.5 stock rom from the posted link for stock roms ..
You need to read and understand before flashing .
jje
---------- Post added at 10:22 AM ---------- Previous post was at 10:19 AM ----------
polly69 said:
if I download this will this take me back to 2.3.3 generic and do I do this using Odin, sorry I'm a pain but I'm new to this and can't get the answer I'm looking for I want to know if as a generic unbranded phone should I have got a 2.3.5 update with kies, if yes where can I get a 2.3.5 stock UK rom.
XWKE2
Firmware info PDA:XWKE2 PHONE: XXKDJ
Build date: 06/05/2011
Click to expand...
Click to collapse
Follow the instructions on the first pages .
If KE3 is 2.3.3 then that's what you get .
Update no that depends upon your phones codes matching codes on the Kies server .
You get a 2.3.5 stock rom from the posted link for stock roms ..
XWKJ3
Android 2.3.5
This package has: PDA: XWKJ3| Modem/phone: XXKI3| CSC: XEUKH2
Download: http://www.multiupload.com/JFWLX5M4EZ
You need to read and understand before flashing .
jje
Ive flashed it before to debrand it, is this just the same done with odin? is this a full firmware and not a beta version.
polly69 said:
Ive flashed it before to debrand it, is this just the same done with odin? is this a full firmware and not a beta version.
Click to expand...
Click to collapse
YES and NO
Read the full post .
http://forum.xda-developers.com/showpost.php?p=16781168&postcount=3
jje
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Click to expand...
Click to collapse
the op has only 7 posts. doesn't he need 10 or more to post where you recommended? (i'm in the same boat).
simes6600 said:
the op has only 7 posts. doesn't he need 10 or more to post where you recommended? (i'm in the same boat).
Click to expand...
Click to collapse
TRY READING WHAT WAS POSTED .
Not allowed in Dev forum please post in Q&A moved to Q&A
New users are not allowed in Dev section to prevent idiotic posts .
jje
Hi
Im new here and new to samsung as i purchased a S3 and absolutely love it so far (goodbye iphone!)
The item is on the network '3' and locked to 3 so what i want to do is debrand the phone so there would be no more 3 pre-installed apps and logos and then root the phone and try the voodoo unlock app to try and unlock it.
I know how to root the phone and install the apk file I am just confused on how to debrand the phone using odin, i do not know which specific firmware I should be using.
I would REALLY APPRECIATE it if someone could send me a direct download link to the network/carrier free firmware that I need to flash my phone and the specific version of Odin that I need and a video/picture tutorial on how to flash as i have never flashed android firmwares.
Here are some details which may help:
Model number: GT-I9300
Android version: 4.0.4
Product code:
firmware version: AP: I9300XXALF6
CP: I9300NELF1
CSC:I9300H3GALF1
kERNEL version: 3.0.15-705505-user se.infra:SEP-65 #1
For some reason when I type the code *2767*4387264636# to find out my phones product code nothing comes up.
Thank you in advance!
You need to root via Odin.
Then flash this following ops instructions via recovery
http://forum.xda-developers.com/showthread.php?t=1704185
Sent from my GT-I9300 using xda premium
Any UK firmware is what i would use ,
But flashing stock firmware via Odin you may lose any upgrade path through Kies and OTA in the future , Nobody on xda needs them any way .
http://forum.xda-developers.com/showthread.php?t=1646610
network problems after you can always flash the 3 modem from the modems thread .
jje
currently i am downloading:
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
from this thread: http://forum.xda-developers.com/showthread.php?t=1646610
will this firmware work?
thanks for both your inputs guys
yes thats fine its what i use alongside the 3 modem
slizza786 said:
currently i am downloading:
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
from this thread: http://forum.xda-developers.com/showthread.php?t=1646610
will this firmware work?
thanks for both your inputs guys
Click to expand...
Click to collapse
haha just realised its the same one slking1989 posted.
treble4 said:
yes thats fine its what i use alongside the 3 modem
Click to expand...
Click to collapse
Do i need to change my CSC? what does CSC stand for and what does it do?
Thank you
slizza786 said:
Do i need to change my CSC?
No only if you hit network problems .
what does CSC stand for and what does it do?
http://forum.xda-developers.com/showthread.php?t=1671969
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
jje
Click to expand...
Click to collapse
Hi all - quick question?
Im using I9300XXBLG8 at the moment and decided to flash the 3 uk modem I9300NELE4 but now no one can hear me and i cant hear them, any ideas why and how to get it to work together?
Thanks
I'm on 3 UK and use the latest lg8 modem, working well for me
Sent via TCP/IP
JJEgan said:
Any UK firmware is what i would use ,
But flashing stock firmware via Odin you may lose any upgrade path through Kies and OTA in the future , Nobody on xda needs them any way .
http://forum.xda-developers.com/showthread.php?t=1646610
network problems after you can always flash the 3 modem from the modems thread .
jje
Click to expand...
Click to collapse
Am on three network I have upgraded to the latest firmware via Odin and unbranded but I noticed my 3g connection Is very poor this wasn't the case before I debranded I don't want to root but can I flash the 3modem separately? And please post the link the to the modems thread I can't seem to find it .
Sent from my GT-I9300 using xda app-developers app
http://dl.dropbox.com/u/19780267/Modems/modem_CWM_I9300NELF1.zip this is the latest 3 modem flash with odin
http://forum.xda-developers.com/showthread.php?t=1740061