Very good sorry if this goes here, but not very good English and the translator does not understand much.
The thing is that I have the Atrix with cherryblue but when I install from the recovery does not work any other roms or factory reset wipe or anything from the Atrix or from the recovery as I can install a clean rom? greetings and apologies for any inconvenience ..
what recovery do you have? the official clockworkmod from rom manager? or the old one? official clockwork recovery does not correctly full wipe.
gh123man said:
what recovery do you have? the official clockworkmod from rom manager? or the old one? official clockwork recovery does not correctly full wipe.
Click to expand...
Click to collapse
not the one that did not work when factory reset or wipe was ClockworkMod. At the end and had to go back and install the official roms with RSD. it is not because of that problem, but is the only solution to e seen .. greetings and thanks ..
Related
I have a few questions on this matter:
1. Is a Factory Reset via Settings the same as doing a Wipe Data/Cache in Recovery?
2. Will a Factory Reset via Settings keep ROM Manager in my system?
3. What actions necessitate a full data wipe as opposed to just a Dalvik cache wipe? ROMs? Kernels? Random stuff that just needs to be flashed?
Thanks!
this is something that could help LINK so read it.
2. are you reffering to clockworkmode recovery?
soberspine said:
this is something that could help LINK so read it.
2. are you reffering to clockworkmode recovery?
Click to expand...
Click to collapse
Many thanks for that link... Earlier today I installed ROM Manager and the CWM custom recovery and I was looking for a complete guide for all the options.
soberspine said:
this is something that could help LINK so read it.
2. are you reffering to clockworkmode recovery?
Click to expand...
Click to collapse
Thank you for that link.
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
I know the title makes myself look like an idiot.
But I'm using CWM 6.0.2.8 and want to know if I can flash a rom that is in INTERNAL storage AFTER I wipe data/factory reset. I saw this thread, someone wipe data/factory reset and the rom in internal storage(virtual SD, I believe that's what he meant) was gone and the device was in a boot loop. He could neither reset his device nor use RUU to get the stock rom back. Eventually he mount a flash disk via OTG to flash the rom to his device.
I don't have OTG cable and want to know if i can still flash custom rom to my HTC One ? If i can , which Recovery should I use, CMW or TWRP?
Thank you.
Sorry posted in the wrong section
I'm using an international one
人云奕云 said:
I know the title makes myself look like an idiot.
But I'm using CWM 6.0.2.8 and want to know if I can flash a rom that is in INTERNAL storage AFTER I wipe data/factory reset. I saw this thread, someone wipe data/factory reset and the rom in internal storage(virtual SD, I believe that's what he meant) was gone and the device was in a boot loop. He could neither reset his device nor use RUU to get the stock rom back. Eventually he mount a flash disk via OTG to flash the rom to his device.
I don't have OTG cable and want to know if i can still flash custom rom to my HTC One ? If i can , which Recovery should I use, CMW or TWRP?
Thank you.
Sorry posted in the wrong section
I'm using an international one
Click to expand...
Click to collapse
after you wipe, you could use adb to push the rom zip to your phone, then flash it.
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom
Thank you for caring, I tried to get a custom rom such as Cyanogenmod but, now everything is not compattible with the kernel i have installed. Thinking factory reset will bring me back to stock os and now im so confused. I have Cyanogenmod on my sd card and Gapps, should i try to install those? BTW my phone is rooted and has jeboo kernel.\
Thanks for the help guys.
koolkyle said:
Thank you for caring, I tried to get a custom rom such as Cyanogenmod but, now everything is not compattible with the kernel i have installed. Thinking factory reset will bring me back to stock os and now im so confused. I have Cyanogenmod on my sd card and Gapps, should i try to install those? BTW my phone is rooted and has jeboo kernel.\
Thanks for the help guys.
Click to expand...
Click to collapse
Factory reset won't put back stock os. Did you do a factory reset, wipe cache partition, then install cyanogenmod? If you can't flash anything, update recovery by install philz recovery or a newer custom kernel.
gsstudios said:
Factory reset won't put back stock os. Did you do a factory reset, wipe cache partition, then install cyanogenmod? If you can't flash anything, update recovery by install philz recovery or a newer custom kernel.
Click to expand...
Click to collapse
I have done a factory reset, ill do wipe cahe, then ill try install cyanogenmod. Ill get back to u for latest news later.
Thanks for the help mate!
gsstudios said:
Factory reset won't put back stock os. Did you do a factory reset, wipe cache partition, then install cyanogenmod? If you can't flash anything, update recovery by install philz recovery or a newer custom kernel.
Click to expand...
Click to collapse
Ok installation for cyanogenmod was aborted? Could you please send a guide on how to do a new custom kernel, or instal philz recovery, sorry i am new to this kind of stuff Oh and do you think would work? flashing a stock rom using CWM?
koolkyle said:
Ok installation for cyanogenmod was aborted? Could you please send a guide on how to do a new custom kernel, or instal philz recovery, sorry i am new to this kind of stuff Oh and do you think would work? flashing a stock rom using CWM?
Click to expand...
Click to collapse
Look at my website and go to the other flashable files page. Scroll down until you see the kernel flashing guide.