Related
Ok, so I was trying to restore my V to its original condition and accidentally deleted my stock nandroid backup in the process, and now it only boots into CWM. I found two different stock zips online and tried installing one then the other. One installed but it's still booting into CWM, and the other just won't install. So I'm not really sure what I'm doing wrong. I actually still have my stock nandroid backup on my PC, but unless there's some way I can boot into the bootloader, I can't do anything with it. So basically I'm stuck and couldn't find any solutions after searching around awhile, though it's getting late so I may have missed something
Edit: I had a an aospCMod zip on another SD card and installed it, and it's still just booting into CWM. Not sure what I screwed up.
freedomispopular said:
Ok, so I was trying to restore my V to its original condition and accidentally deleted my stock nandroid backup in the process, and now it only boots into CWM. I found two different stock zips online and tried installing one then the other. One installed but it's still booting into CWM, and the other just won't install. So I'm not really sure what I'm doing wrong. I actually still have my stock nandroid backup on my PC, but unless there's some way I can boot into the bootloader, I can't do anything with it. So basically I'm stuck and couldn't find any solutions after searching around awhile, though it's getting late so I may have missed something
Click to expand...
Click to collapse
well in CWM i think you can enabled usb toggle...
terratrix said:
well in CWM i think you can enabled usb toggle...
Click to expand...
Click to collapse
Ah, thanks. Didn't realize that. I should just be able to plop my backup into the CWM backup folder.
I transferred the stock backup from my PC to the CWM backup folder and then restored it, and it's still only booting into CWM
freedomispopular said:
I transferred the stock backup from my PC to the CWM backup folder and then restored it, and it's still only booting into CWM
Click to expand...
Click to collapse
Yeah happened to me too.
Only way is to flash back via kdz...since the other roms can't work.
terratrix said:
Yeah happened to me too.
Only way is to flash back via kdz...since the other roms can't work.
Click to expand...
Click to collapse
Thanks. I'll have to check that out later.
freedomispopular said:
I transferred the stock backup from my PC to the CWM backup folder and then restored it, and it's still only booting into CWM
Click to expand...
Click to collapse
before trying to restore this backup, did you wipe data, cache, and dalvik cache?
sweetnsour said:
before trying to restore this backup, did you wipe data, cache, and dalvik cache?
Click to expand...
Click to collapse
Yes I did.
I am currently on CM7 RC1 and planning to go back STOCK ROM.
I have my back-up stock rom via CWM. Would it possible if I flashed my stock rom back-up(via CWM) even if I am currently on CM7 ROM?? Please help to verify. Thank you.
droidtwoseven said:
I am currently on CM7 RC1 and planning to go back STOCK ROM.
I have my back-up stock rom via CWM. Would it possible if I flashed my stock rom back-up(via CWM) even if I am currently on CM7 ROM?? Please help to verify. Thank you.
Click to expand...
Click to collapse
Backup your CM7 in case it ****s up .
-Factory reset
-Wipe both caches
-Format /system
-Restore Stock
-Reboot
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Backup your CM7 in case it ****s up .
-Factory reset
-Wipe both caches
-Format /system
-Restore Stock
-Reboot
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Did this but I'm stuck on "GT-S5830 Galaxy Ace" Screen. Please help.
try to wipe caches..
i remember this happened with me also...
download same fresh rom from sammobile and flash it first with odin and try to restore now..
haven't tried this but may work
madman_amit said:
try to wipe caches..
i remember this happened with me also...
download same fresh rom from sammobile and flash it first with odin and try to restore now..
haven't tried this but may work
Click to expand...
Click to collapse
Do you mean ill wipe caches after I restore??
droidtwoseven said:
Do you mean ill wipe caches after I restore??
Click to expand...
Click to collapse
Try flashing Cf-root
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Try flashing Cf-root
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
How come this will help?
Do wiping caches after I restore will solved this? Please help to confirm.
I don't want to do Odin for now
Surefire way to work will be to
1.) Factory reset
2.) ODIN flash stock ROM of same baseband
3.) Flash CWM
4.) Flash stock ROM backup
I just want to confirm that I have the same problem: when I restored my stock-rom-backup using CWM from C7.1, the phone got stuck in the same point as droidtwoseven said.
I also confirm that I restored the previous C7.1 and the phone is working now. However, I would like to know how to restore the stock rom from CWM.
I hope we can find a solution because this seems to be a problem that everyone will have.
Maybe the problem has something to do with the partitions that C7.1 creates (I'm not sure about this, I'm just a noob).
Thank you.
davidteleco said:
I just want to confirm that I have the same problem: when I restored my stock-rom-backup using CWM from C7.1, the phone got stuck in the same point as droidtwoseven said.
I also confirm that I restored the previous C7.1 and the phone is working now. However, I would like to know how to restore the stock rom from CWM.
I hope we can find a solution because this seems to be a problem that everyone will have.
Maybe the problem has something to do with the partitions that C7.1 creates (I'm not sure about this, I'm just a noob).
Thank you.
Click to expand...
Click to collapse
It could well be that stock ROMs are based on rfs file system while CM7.1 is based on ext 4. Maybe a script has to be implemented to convert the file system back to rfs. I am just hazarding a guess.
happily1986 said:
It could well be that stock ROMs are based on rfs file system while CM7.1 is based on ext 4. Maybe a script has to be implemented to convert the file system back to rfs. I am just hazarding a guess.
Click to expand...
Click to collapse
This is a critical issue that I would like to resolve. I can assume that I will have to flash a stock rom with ODIN but I am afraid that ODIN will brick my phone because of problems with the partitions/file system (RFS vs EXT4).
I don't really know if installing cyanogenmod7.1 by clockworkmod4-recovery has change my phone partitions so I am not sure if ODIN can restore a stock rom by the usual way.
Any help with this?
Thank you so much!
By flashing with ODIN, system file system will revert do rfs.
Most of the Custom ROMs are running on ext4 now, and I flashed several times back to Stock with ODIN after running a Custom ROM with ext4fs.
I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom
tetakpatak said:
Please quote my post and copy&paste whole text into some help thread for your phone, it is better idea as we are now getting off topic here. I'll try to help you there.
Format /system is done in recovery mode under "mount and storage" then after that you can restore your nandroid if it is done with the same recovery you use now. If you're on PhilZ 6, it usually can restore also CWM 6 backups.
Click to expand...
Click to collapse
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Click to expand...
Click to collapse
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
tetakpatak said:
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
Click to expand...
Click to collapse
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it? .
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it?
Click to expand...
Click to collapse
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
tetakpatak said:
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
Click to expand...
Click to collapse
Thanks for helping, but I ended up downloading the stock rom and flashing it. Everything was normal. Then I installed cm10.2 so everything's great now. Thanks!
Sent from my Nexus 4 using xda app-developers app
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
tetakpatak said:
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
Click to expand...
Click to collapse
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Sent from my Nexus 4 using xda app-developers app
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
keithross39 said:
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
Click to expand...
Click to collapse
6.0.4.5 is compatible? I think so ......
Sent from my Nexus 4 using xda app-developers app
I've always read....not.....
In any case, probably best not to risk it......
6.0.4.7 is DEFINITELY KK compatible.... and it'd take a couple of seconds to flash.........
Sent from my Infected KitKat bar.....
AndroidReborn said:
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Click to expand...
Click to collapse
Yes, mate, CWM 6.0.4.5 is capable of flashing KitKat.
It is usually always the same:
download your ROM zip and compatible Gapps
check in the phone (or PC) if the zips are corrupted through download (if they open after clicking them, they are fine)
move the zips to the folder you will flash it from (if you use PC to flash zips with ADB sideload, put them in the sdk/platform-tools folder)
make nandroid backup of your presently used ROM
wipe data/factory reset
wipe cache
wipe dalvik cache (advanced)
format /system (under mount and storage)
flash ROM.zip
flash Gapps
reboot
It is in general always good to read in the development thread of the ROM you attend to flash in the opening post which Gapps are recommended, or if there is some unusual order of flashing (sometimes, developers recommend reboot system after flashing ROM, and after that going to recovery and flash Gapps zip.
Some KitKat ROMs struggle with root access by using Superuser, so SuperSU should be flashed. If SuperSU app from Play Store gives errors by updating binary, you should uninstall SuperSU app then, find in the Chainfire's thread the compatible UPDATE-SuperSu.zip (version for your phone), flash its zip in the recovery, install SuperSU app, update binary (either "normal" or "through CWM/TWRP")