Hi,
I want to go back to 3.0.1 on my IO limited but I am not able to find an image to flash via ODIN.
I want to go back, install CWM, root, and update keeping root.
Thanks for your help
tonovcp said:
Hi,
I want to go back to 3.0.1 on my IO limited but I am not able to find an image to flash via ODIN.
I want to go back, install CWM, root, and update keeping root.
Thanks for your help
Click to expand...
Click to collapse
you dont need odin.
enter fastboot.
(if you have any media):
fastboot boot CWM
adb shell mount /data
pull your media off
adb reboot bootloader
fastboot erase system -w
unpack system.zip from:
http://droidbasement.com/galaxy/sys-backup/
fastboot flash system.img
unpack boot.zip from:
http://droidbasement.com/galaxy/sys-backup/
fastboot erase boot
fastboot flash boot.img
unpack recovery.zip from here:
http://droidbasement.com/galaxy/sys-backup/
fastboot boot recovery.img
factory reset -> reboot
done.
Thanks for the reply, but I have problem with fastboot: computer recognizes and driver is installed, but when type "fastboot devices" nothing happens.
Also, if I try "fastboot whatever", it stays forever: waiting for device.
By the way, I am very very newby on this. I read posts and follow instructions step by step, but I need step by step procedure.
Can you explain it for me?
Thank you
install pdanet to get the fastboot drivers or get the the driver via sdk manager and install it manually against the device. this is in regards to windows os.
I have drivers installed, and detected as NVIDIA android fastboot device, but when I type "fastboot devices" nothing happens. After that try to push CWM and keeps eternally waiting for device.
HELP PLEASE
SOLVED: I had to choose manually drivers from google-sdk and this instructions to get fastboot to work. I only flashed root, no need to go back to 3.0.1... now rooted
"
6. Type "fastboot devices" your device serial should appear!If not:
Edit the “<PATH TO ANDROID SDK>\extras\google\usb_driver\android_winusb.inf” file and copy/paste the following lines and add them to the [Google.NTx86] section (for 32bit Windows) and/or [Google.NTamd64] (for 64bit Windows).
NO Empty line above this set, though galaxy tab 10.1v but works for all variants!(tab detected as adb xxx device)
;Galaxy Tab 10.1v
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&REV_9999&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&MI_01
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6601
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
"
Now into boot loop
begin with typing adb start-server enter, than run fastboot commands!
start from beginning of the source post or flash rom with 3.0, from
http://forum.xda-developers.com/showthread.php?t=1119492
than update from the tab to 3.1, or flash the [stock][eur]touchwiz rom! I prefer flashing to 3.0 and updating from settings>about>update to 3.1
Solved this way:
1- edited C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf
following the instructions found in a post:
......................................................
Type "fastboot devices" your device serial should appear!If not:
Edit the “<PATH TO ANDROID SDK>\extras\google\usb_driver\android_winusb.inf” file and copy/paste the following lines and add them to the [Google.NTx86] section (for 32bit Windows) and/or [Google.NTamd64] (for 64bit Windows). I copied in both
NO Empty line above this set, though galaxy tab 10.1v but works for all variants!(tab detected as adb xxx device)
;Galaxy Tab 10.1v
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&REV_9999&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&MI_01
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6601
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
..............................
2- changed Nvidia driver controller manually to the one in C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf
3- fastboot now working, but had to restore factory data and wipe in order to work (Had a loop boot)
Which root file did you use ? Been trying to root and I get the same problem as you (with the root instructions on the other post)
My fastboot and nvflash works .. but the adb refuse to detect the device
tonovcp said:
I have drivers installed, and detected as NVIDIA android fastboot device, but when I type "fastboot devices" nothing happens. After that try to push CWM and keeps eternally waiting for device.
HELP PLEASE
SOLVED: I had to choose manually drivers from google-sdk and this instructions to get fastboot to work. I only flashed root, no need to go back to 3.0.1... now rooted
"
6. Type "fastboot devices" your device serial should appear!If not:
Edit the “<PATH TO ANDROID SDK>\extras\google\usb_driver\android_winusb.inf” file and copy/paste the following lines and add them to the [Google.NTx86] section (for 32bit Windows) and/or [Google.NTamd64] (for 64bit Windows).
NO Empty line above this set, though galaxy tab 10.1v but works for all variants!(tab detected as adb xxx device)
;Galaxy Tab 10.1v
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&REV_9999&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_04E8&PID_6860&MI_01
%SingleAdbInterface% = USB_Install, USB\VID_04E8&PID_6601
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
"
Click to expand...
Click to collapse
Hi pershoot,
I did what you suggested and everything seemed to work fine for my IO tablet.
However, I noticed that my storage shows only 13.7GB total now.
It used to be around 27GB.
Any idea what's going on and how to fix it?
Any help would be appreciated. Thanks!
try to reformat your internal memory from recovery! ELse try reflashing with pit file from [stock][rom][eur]touchwiz after
So how do you root the IO tab now ??
I updated to touchwiz but am unable to root since the PWR + Vol button always puts me to fastboot
And for some reasons .. ADB works .. but fastboot doesn't (NVFLASH works too)
gunzo71 said:
Which root file did you use ? Been trying to root and I get the same problem as you (with the root instructions on the other post)
My fastboot and nvflash works .. but the adb refuse to detect the device
Click to expand...
Click to collapse
Hi,
I used this cwm:
http://droidbasement.com/db-blog/?p=2061
and root from this post:
http://forum.xda-developers.com/showthread.php?t=1171089
Also installed rom manager to reboot to recovery if needed in future, I cannot do it any other way
Ahh .. sorry .. your fastboot works ?? I typed wrongly ..
should be ADB works but fastboot doesn't work for me .. it keeps saying waiting for device .. strange since previously it worked ..
I can't do the fastboot flash img.. for now ..
:EdITTED: - oops seems like I have the exact same issue as you in the earlier post now let me try that 1st ..
tonovcp said:
Hi,
I used this cwm:
http://droidbasement.com/db-blog/?p=2061
and root from this post:
http://forum.xda-developers.com/showthread.php?t=1171089
Also installed rom manager to reboot to recovery if needed in future, I cannot do it any other way
Click to expand...
Click to collapse
ROOT from that post doesn't work ..
I've flashed the CWM in .. but I CAN'T GET into recovery mode to do the install via ZIP option remember
Only way I see now is to do what did previously .. I just want to know what you did that is much shorter than mine ..
FLASH ODIN GT7105.tar img
- Gets you 3.0.1 rooted
INSTALL CWM and REBOOT FROM THERE
-Gets you into Recovery mode
INSTALL Touchwiz update and INSTALL ROOT.zip at the same time ..
- updates to the new touchwiz ROM and gets rooted at the same time
REBOOT DEVICE
- Updates Firmware to touchwiz and you get a rooted I/O tab
Do you have a shorter way ???
Thanks btw .. now I get all the android low and high level comms tools to work
1-Flash 3.0.1 ROM,
2-update to 3.1 from settings>about>update and get it updated from samsung directly on tab (no touchwiz! wait till 3rd august for a stable release).
3-Next install rom manager from market and get clockworkmod recovery from the app!
This is the shortest possible way. remember to clear data after flashing 3.0 to remove the password prompt at startup!
mughalgxt said:
1-Flash 3.0.1 ROM,
2-update to 3.1 from settings>about>update and get it updated from samsung directly on tab (no touchwiz! wait till 3rd august for a stable release).
3-Next install rom manager from market and get clockworkmod recovery from the app!
This is the shortest possible way. remember to clear data after flashing 3.0 to remove the password prompt at startup!
Click to expand...
Click to collapse
Hi .. step 3 require root .. which you can't get on 3.1 with the I/O
Seems like 3.0.1 retrograde to root and work from there is the only option ..
From there .. the choice is yours to go either OC or Bonsai or Touchwiz or stock 3.1
3.0.1 ROM, is rooted and upgrading from about>update on tab doesn't effect the root, it stays! Hence after the update you have a rooted 3.1 stock firmware ready for the next to-be released touch wiz update!
I did not have to go back to 3.0.1, I rebooted to recovery as in picture in post #8
http://forum.xda-developers.com/showpost.php?p=15823121&postcount=8
"
Installation instructions:
It is reccomended you try out the recovery before replacing your stock recovery.
fastboot boot recovery-cwm_4.0.0.4-sam-tab-10.1.img
If you are happy with it, then to replace your recovery:
fastboot flash recovery recovery-cwm_4.0.0.4-sam-tab-10.1.img
"
once there, flash the root.zip
Here you have recovery (two different to try) and root.zip I used
The main problem was get fastboot to work (driver problem) then reboot into recovery and flash root. Once rooted I installed ROM Manager (to work further flash, and reboots etc...)
PS: I am newby at this. I just searched and found different solutions in different posts that helped me out. I just can tell you what I did, and worked for me.
I hope it works for you, if not, it is time to ask the experts in the forums .
mughalgxt said:
3.0.1 ROM, is rooted and upgrading from about>update on tab doesn't effect the root, it stays! Hence after the update you have a rooted 3.1 stock firmware ready for the next to-be released touch wiz update!
Click to expand...
Click to collapse
I screwed up when trying to go back from 3.1TW to 3.0.1.. the launcher application now keeps forceclosing .. so I can't even access CWM
tonovcp said:
I did not have to go back to 3.0.1, I rebooted to recovery as in picture in post #8
http://forum.xda-developers.com/showpost.php?p=15823121&postcount=8
"
Installation instructions:
It is reccomended you try out the recovery before replacing your stock recovery.
fastboot boot recovery-cwm_4.0.0.4-sam-tab-10.1.img
If you are happy with it, then to replace your recovery:
fastboot flash recovery recovery-cwm_4.0.0.4-sam-tab-10.1.img
"
once there, flash the root.zip
Here you have recovery (two different to try) and root.zip I used
The main problem was get fastboot to work (driver problem) then reboot into recovery and flash root. Once rooted I installed ROM Manager (to work further flash, and reboots etc...)
PS: I am newby at this. I just searched and found different solutions in different posts that helped me out. I just can tell you what I did, and worked for me.
I hope it works for you, if not, it is time to ask the experts in the forums .
Click to expand...
Click to collapse
Well .. I tried this CWM recovery.img earlier .. doesn't work .. when I do a reboot .. it reboots to startup again ..
Got 1 tab rooted using my long way round method (should nothave updated to 3.1 so fast before rooting ) ..
Then I softbricked the other trying to revert back 3.0.1
Anyway .. I recovered it by copying over images of the rooted tab using nvflash
Thanks again guys for the help and the sharing !
Related
ph84 said that dual boot is possible and he will write how to.
When???(don't hurry, I only ask)
Maybe your question can be answered if you look for the Topogigi's post in this thread [HOW TO] Linux on Folio.
I've not try this, because i don't understand some things... if someone makes a how to step by step, would be amazing !!
Here is how to get it without steps:
Topogigi said:
[ONLY FOR DEVELOPERS AND SKILLED PEOPLE: NOT FOR NEWBIES!!!]
My 2 cents:
I installed ubuntu and it works quite well. I'd like to point out that it you can boot android or ubuntu flashing the boot.img containing the linux kernel in place of recovery kernel (fastboot flash recovery boot.img). You can even try a kernel before flashing it to the device (fastboot boot boot.img). To enter fastboot mode in your device, simply press the power button three times when the Toshiba logo appears on the screen at powerup, then press volume up one time. Voila, you are in fastboot mode...
To boot linux, you have to press "power+volume up", then follow the instruction on screen to wipe the device (don't worry, it will boot linux and it will not wipe anything). You'll miss the recovery partition that way, but you'll gain a dual-boot tablet with android and ubuntu in change. Not a bad trade.
If you really need recovery, you can always reflash it with fastboot, so the process is perfectly reversible.
Now, back to business:
1) Touchscreen works (sort of). If you apt-get evtest, you'll notice that /dev/input/event3 is bound to the touchscreen and it reports to be alive and kicking. The test reports the coordinate changing and the pressure on the screen (multitouch works too). But......in Xorg, the device only reports the pressure and coordinates are not changing. You can test with xinput as I did. It seems a software-related issue: the drivers does not report correctly what the hardware is telling him. I'll investigate and report back if news will come out.
2) Wifi could eventually work. The card is bound via SDIO bus, and a ar6000 driver supporting SDIO is available. I'll try to compile the driver ASAP.
3) Suspend, cpufreq do not work and I doubt they will work without driver sources
4) Battery is working, framebuffer is working good and the system seems quite snappy also with an EXT4 partition on a MMC. Openoffice works great, quicker than expected.
5) If you compile the kernel with nilfs2 support, you can easily mount all the android partitions within ubuntu with ease. Not bad...
That's all for the moment: I hope that someone will help me to make this little devil fly.
Click to expand...
Click to collapse
sergi711 said:
Maybe your question can be answered if you look for the Topogigi's post in this thread [HOW TO] Linux on Folio.
I've not try this, because i don't understand some things... if someone makes a how to step by step, would be amazing !!
Here is how to get it without steps:
Click to expand...
Click to collapse
That's quite easy in fact :
In fastboot, just flash the boot.img instead of recovery :
fastboot flash recovery boot.img
That's it... you will loose "auto" recovery, but you will gain Linux Ubuntu
Akta
Akta77 said:
That's quite easy in fact :
In fastboot, just flash the boot.img instead of recovery :
fastboot flash recovery boot.img
That's it... you will loose "auto" recovery, but you will gain Linux Ubuntu
Akta
Click to expand...
Click to collapse
It sounds easy... but i have never enter in fastboot mode... I don't know what commands use...
Another question, I have flashed the update.zip from ph84 to boot only ubuntu, when i flash this boot.img on fastboot mode how I flash the foliomod ???
fastboot, SDK, UPDATE.ZIP, DRIVERS etc.
Sergi711
1.I know for that(try), but I can't use fastboot. I installed all drivers, but I can't send commands to Folio 100. I made thread for help, but no one help me. If you can help, please, help me!!!!!!
Can we make update.zip with that kernel and don't use fastboot?
2.a)First, download and install SDK.
http://developer.android.com/sdk/index.html
Second, go here http://www.addictivetips.com/mobile/enable-adb-usb-drivers-for-nvidia-tegra-based-android-tablets and install drivers.
Third, enter fastboot mode(3X Power UP+Volume UP) IF YOU PRESS POWER UP 4X, YOU'LL BRICK TABLET AND FOR THAT YOU CAN'T FIND HELP!!!!!
Moreover, connect Folio with PC,Laptop, NetBook, Tablet PC or NoteBook via USB and open terminal(Start>Run>cmd) and go to C:/android-sdk/platform-tools (in my
case)
Terminal: cd C:/android-sdk/platform-tools
Fifth, now run fastboot.exe and type anything you want
Terminal: fastboot _______________( fastboot flash recovery boot.img)
b) If you flash boot.img from ph84 to boot Ubuntu ARM on Folio 100, in future, you'll can only boot from SD Card or USB(sdmmc-update.zip or usb-update.zip). You'll not use Folio's internal storage and you'll can't boot to FolioMod, but from recovery you can easily reflash FolioMod or another rom or custom kernel(you need to reflash kernel and you can made your own update.zip with your custom kernel and don't touch FolioMod )
Akta77
Can we we copy recovery to /date or /date/date folder and boot it like MCLP said for installing FolioMod or another rom?
Step 1. Install Root Explorer on Folio 100(can't post app, because rules, but with googling find it easily or download it from android market)
Step 2. Copy the recovery image from FolioMod(if you want original recovery) or from CyanogenMod7.0.0(if you want unofficial ClockworkMod recovery) to SD Card or Internal storage
Step 3.With Root Explorer copy recovery.img to /date or if you find another date directory inside copy there(copy recovery.img to both directory just in case)
Step 4. Exit from Root Explorer, got to Settings>Applications>Development and enable USB Debugging
Step 5. Connect Folio 100 to PC or etc. via USB and open Terminal(cmd) and go to SDK directory C:/android-sdk/platform-tools(in my case)
Terminal: cd C:/android-sdk/platform-tools
adb shell (use this if you have installed SDK drivers for Tegra devices)
cat /data/recovery.img >/dev/block/mmcblk0p7
or
Install any Terminal app on Folio 100 and type
Android Terminal: cat /data/recovery.img >/dev/block/mmcblk0p7
After this, you should have recovery
Jon2555 said:
Sergi711
1.I know for that(try), but I can't use fastboot. I installed all drivers, but I can't send commands to Folio 100. I made thread for help, but no one help me. If you can help, please, help me!!!!!!
Click to expand...
Click to collapse
Maybe this helps: http://forum.xda-developers.com/showthread.php?t=1055754
Most other fastboot binaries out there don't recognize tegra devices.
I just use the SDK's Fastboot under Linux (built from Cyanogen's 7 repo) without any problem.
If you are using Windows, have you modified the inf has stated by google?
Entering fastboot is simple : just press x3 power and then volume up at boot screen.
You will be in fastboot mode.
I am not sure we can boot the kernel from somewhere else than boot partition or recovery partition. But we could maybe build a relocable kernel and load Linux or Android using kexec from boot partition like "petiboot" on PS3
Akta
Thank's guys!!! I'm going to try it whan I back from France.
Sent from my folio 100 using Tapatalk
could someone that have a dual boot ubutntu/android make a how to for us... ??? because i read the lastest post that you reply i don't know how to have a dual boot yet.. i can't understand... please a how to is needed, step by step...
thanks in advance !!!
Hi,
Just wrote you how to do it
Boot the tab in fastboot (3xPower + 1 Vol Up)
Then connect your tablet on your PC and do :
fastboot flash recovery boot.img (boot.img is extracted from update.zip according to your wish (SDCARD or USB PENDRIVE)).
Akta
ok i flash the boot.img on fastboot, and then ??? i only have now ubuntu, how i install android after fastboot flash boot boot.img ????
I know, i must enter fastboot mode, and flash boot.img instead of recovery.
After that, i will only be able to boot from sdcard... isn't it ?
Ok, i must have 2 sdcards to boot android, and the other sdcard to boot ubuntu ???
if this is right... how the sdcard must be ??? update.zip on the root ???, the update zip extracted on the root of sdcard ??
i have lot of doubts after the fastboot flash recovery boot.img step, sorry.... can anyone help me ??
I think when you flash boot.img(sd or usb) for dualboot, when sd card with Ubuntu is in Folio you'll boot ubuntu(sd or usb) and if you haven't got Ubuntu sdcard or you have it (but not Ubuntu sd) or if you haven't any you will boot to android.
What's up with my question?
Sent from my folio 100 using Tapatalk
Ok i understand that after flash boot.img instead of recovery on fastboot mode... folio will boot from sdcard, in that case, if you push a sdcard with an ubuntu filesystem, folio will boot ubuntu, and if you remove sd after boot moment, folio will recognise internal sd and boot android ??? thats it ???
edit: but what boot.img must i flash ???
When i will have some time, i will rebuild a boot.img able too boot linux from a second partition on the sdcard. You will have fat32 on first partition and ext3 or ext4 on second. For now, you can live your sdcard in the folio but android is not able to access it (lack of ext3 / ext4 support, but easy to install ).
Akta
Thank's Akta for your help!!! Can you sometime post your progress? I want to help, but I don't have dev skills. Can you post some good link(searched, but no luck) or your howto about making kernels? I found for themes and I'll try to make some in my free time.
Sent from my folio 100 using Tapatalk
Quite interested by the dual boot on Folio 100.
I will keep an eye on this thread.
Akta77 said:
That's quite easy in fact :
In fastboot, just flash the boot.img instead of recovery :
fastboot flash recovery boot.img
That's it... you will loose "auto" recovery, but you will gain Linux Ubuntu
Akta
Click to expand...
Click to collapse
I there, I have few questions:
First, why are you flashing boot into recovery? Is not supposed that boot is the image that cares about booting procedure?
Second, once first question is solved, which boot image are we supposed to flash? I mean, we will need one that searches into sd for a boot/grub, isnt it?
Third, what about the procedure, I explain myself, the logical order of doing all this is: flash an android rom, CM for example, then do the procedure to install ubuntu into the sd and finally flash the boot img so system looks for sd-ubuntu and if it's not found, then boot internal android rom, am i right?
Thanks!
1. Yes.
2. Yes.
3. Yes.
Sent from my GT-I5700 using Tapatalk
Well, then:
Which image should we flash? Where can I can get it?
And finally, this image where must be flashed to dualboot?
Thanks!
Look in the second post on first page. You will see someone talking about dual boot. Find that post in first threde of Ubuntu for Folio 100 that wrote DerArtem(I think)
I don't have time to post link, but if you don't find it tell me and I'll post link.
I have a UK-bought SGT10.1, which I rooted shortly after purchase and installed CWM Recovery using Odin. I've been running In Paris for a while, and was about to update to v5. Last time I downloaded pershoot's kernel from droidbasement, I saw an updated version of CWM Recovery here: http://droidbasement.com/db-blog/?p=2370.
Being a security-type, running the latest versions is always the best option to me - and seeing I know my way around the console I figured I'll install adb/fastboot and use that this time instead of Odin. So I downloaded the SDK, installed the Tab 10.1 drivers (I've reinstalled Windows since I rooted), and grabbed the fastboot .exe from the previous revision and placed it inside android-sdk\platform-tools next to adb.
Now I'm trying to follow the instructions to install the extracted .img - but having some issues getting into fastboot mode in order to execute the commands. Running adb devices results in expected output, as does adb reboot recovery. However running adb reboot bootloader causes the device to reboot all the way back through to the lockscreen. I see some advice stating that to manually enter fastboot you reboot the device holding power+vol down, then pressing down to switch to the second option that isn't download mode. However that to me is the option to manually enter CWM Recovery, so now I'm confused. Running fastbooot reboot-bootloader cause
I don't want to brick my device, so I figured I'd ask for some advice here for getting into fastboot mode, and ask whether I can just flash the .zip inside CWM Recovery or if that is a very risky move?
Thanks in advance
Did you get the message: Magic Value Mismatch:-.-.-.-.-.-?!
After flashing a new recovery it happens sometimes.
GREEN ZONE
Are you able to go to the recocery menu(power + vol up)? If not, go to BLUE ZONE. If yes, follow these steps
1. check whether you have copied your rom as "update.zip" to your SD card's root directory
2. Go to recovery menu and install update.zip
BLUE ZONE
You may did something wrong while flashing a new recovery. Here is the right method:
1. go back to fastboot mode(power+power+power+vol up) and type these commands on your PC
2. fastboot erase userdata
3. fastboot erase system
4. fastboot erase cache
5. fastboot erase linux
6. fastboot erase recovery
7. fastboot flash recovery recovery.img (change path, if recovery.img is not in the same directory as fastboot.exe)
8. fastboot reboot
Are you able now to go to the recovery menu? If yes, go to GREEN ZONE and follow steps. If not, go to ORANGE ZONE.
ORANGE ZONE
Are able to unpack the update.zip and find the system.img and boot.img files? If not, then go to RED ZONE. If yes, copy these 2 files to the directory where the fastboot.exe is, run these commands:
1. fastboot erase recovery
2. fastboot flash recovery recovery.img
3. fastboot -w
4. fastboot erase linux
5. fastboot erase system
6. fastboot flash system system.img
7. fastboot flash linux boot.img
8. fastboot reboot
ROM is installed. Enjoy it!
RED ZONE
Make sure, that you copied the same recovery.img to fastboot folder, that you had flashed before to your tablet.
Type this command in recovery mode:
1. fastboot boot recovery.img
This command will run the recovery from your PC. After the recovery menu is booted, go to GREEN ZONE and enjoy your ROM!
If this was helpful to you, please do not hesitate to click on Thanks!
Lol, nice to see my post copy/pasted without any links indicated. Anyway, I hope It's helpful for ppl.
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
yellowumbrella said:
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
Click to expand...
Click to collapse
So you installed the recovery via fastboot. Did you manage to boot into recovery mode?
I had that issue, that I couldn't boot into recovery mod from my Folio, by pressing power+Up button. Thats why I added the RED ZONE method. Its like booting recovery from your PC. (fastboot boot recovery.img). All the times I wanna upgrade my current ROM, I have to do this step, because the power+up does not work, and the Folio skips booting in recovery and wanna do normal booting. However there is no Rom installed on machine, so I get the magic value mismatch message.
So try to boot recovery from your PC, but be sure you have copied to your fastboot folder the same recovery, that you flashed onto the tablet.
I hope it was helpful. If something is not clear, feel free to ask.
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
yellowumbrella said:
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
Click to expand...
Click to collapse
Are you able to wipe cache from recovery? And what else errors are listed?
One more thing, try to flash your boot.img and system.img via fastboot as written above.
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
yellowumbrella said:
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
Click to expand...
Click to collapse
Well just to see it clear. So you are able to install Foliomod 1.4, so your Internal storage is not broken.
When I get home, I will check the system folder of ICS rom. There are some method to create system.img from an unpacked folder...
So, in CWM 5.5.0.4 you manage to install Zip from SD card, ROM and GAPPS as well, but the Rom does not boot?!
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
yellowumbrella said:
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
Click to expand...
Click to collapse
Try to install gapps as well. Maybe it helps...
nope, no luck even with gapps installed..
just a blank screen..
sigh
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Have you tried all the roms? ICS Alpha 1,2,3 and 4?
Tried 3 and 4, didn't bother trying earlier ones, as it seems the latest ones work for most users
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Hmmm strange. I ask it for you on developers forum. What you can still do, is to check the steps, that you did them correctly. In most of the cases users forget something, or do some steps incorrectly.
Try to erase userdata, cache, system, linux and recovery in fastboot. You mentioned you had problem with fastboot under Win7. Problem may occur, in case of not proper erasing.
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
yellowumbrella said:
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
Click to expand...
Click to collapse
For me it works perfectly on Win7. After Installing SDK and JDK the in the devicemanager it is shown as an Unknown device. Simply add the driver manually to it.
Download driver from attachment.
Copy it to SDK\USB_driver folder
That works for me. After its done, the Folio is shown as "Fastboot" in device manager. But connect the tablet in fastboot mode to your PC before you add driver manually to it.
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
yellowumbrella said:
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
Click to expand...
Click to collapse
When You have win7, You have run the console as admin!
Or copy the complete Fastboot folder to another Destination like c:\temp...
Thanks stefannsv, tried it, still not showing...
But I can access fastboot on another platform, so I assume it's not an issue, I can just switch over to another OS to flash
no go, followed both this original post (tried all steps except orange, cause the rom I'm trying to install has a system folder, not a system.img)
Last method I tried was:
1) boot into fastboot
2) boot cwm-recovery-5.5.0.4.img directly from PC
3) wipe data/factory reset
4) wipe cache partition
5) install zip from SD card and chose the alpha 4 release
installing update...
then back to recovery, reboot and voilà... magic value mismatch again (it had disappeared for a while... )
Also, when booting into CWM 3.0.0.5, I get a series of "E: Can't mount/cache/recovery" type errors.. could this be related?
booting directly into recovery from PC doesn't alllow me to install any ROMS, not even foliomod 1.4 which works if using puppet13th's method
I have a transformer prime rooted with cwr v5.8.1.8 and i tried to switch rom from virtuos prime on primalicious . I entered in cwr and deleted all and now i can even boot into my old rom .. i can't use usb mass storage and sd card when I try to boot it gets stuck on boot screen … what can I do now?..
Boot back into CWM and reinstall the ROM.
If that does not work, you will need to do Option 1a in the Recover from a Brick thread.
I can't install the rom again because I deleted everything (my mistake)...
dragos193 said:
I can't install the rom again because I deleted everything (my mistake)...
Click to expand...
Click to collapse
You will probably have to use ADB to push the ROM.zip to your internal sdcard from your PC ... then you will be able to reinstall the rom. If you read thru the "Unbrick your Prime" thread, there are tips to getting this done.
I try to use wsg unbricker but I don't know what options to chose to install a fresh stock rom please help..
nobody knows? please help i'm desperate
i still can't open my prime please anyone know what to do ?
This fixed my ASUS tablet! - Blob Files!
Hello there, for the last few nights I was having the same issue as you. I bricked my tablet, fixed it, and then just got stocked on the recovery with no data on my SDCARD. A guy named "dklue" gave me an idea, i googled some more information about something very important that I was missing!: "Blob files".
The "Primalicious_9.4.2.21._Final.zip" file or the "AOKP.zip" file will not work just like that because they are not in the format to be "Pushed" using the push command (At least thats what i kinda realized lol) anyhow, so i went online and searched for a ROM on Blob format and luckily i found the following!:
[ROM][WW][US][9.4.2.21] Primeval: The STOCK stock rom
So here is what worked for me thanks God! lol (Keep in mind that for some reason this process did not work for me on the new "CWM Touch Recovery 5.8.1.8" I actually had to downgrade my CWM to the 5.5.0.4 Version, you can download it from here:
androidroot . mobi / 2012 / 02/22/introducing-cwm-for-asus-transformer-prime/ --> WITH NO SPACE in between!
Here is how to Install the CWM file on your prime:
1. Get fastboot from that website, and extract it.
2. Download the blob file (tfp_CWM5_androidroot.blob), and put it in the same folder as where you extracted fastboot.
3. Power off your prime.
4. Boot with Volume-down pressed. Wait when you see text appearing. The prime will then allow you to start “fastboot” -> USB ICON.
5. Open up a command-line prompt, and navigate to where you extracted fastboot with “cd”.
6. Enter the following commandline to flash recovery: fastboot -i 0x0b05 flash recovery tfp_CWM5_androidroot.blob
7. Reboot
-----------------------------------------------------------------------------------------
Anyhow, so after you have that version installed:
1. Download "ROOTED 9.4.2.21 CWM compatible signed US version"
d - h . s t / r 4 4 -> WITH NO SPACE! (This is from the Primeval: The STOCK stock rom) Thread.
2. EXTRACT IT to the same directory where your ADB is! We only need the BLOBFILE from that zip folder!
3. Once you have the files extracted just run the following on your Command line:
adb push blobfile /sdcard/ ---> Its going to look like its not doing
nothing but dont worry its doing it in the background after 401 or some
seconds the command line will returned to you with a message like this:
1275kb, dadadada...
4. VERY IMPORTANT!: enter:
adb shell
dd if=/sdcard/blobfile of=/dev/block/mmcblk0p4
(Same as the previews step it will take forever but it will work dude!)
5. DONE! at least this is what worked for me man!
Im so happy now my Asus is freaking Brand NEw again! i was JUST about to through this garbage away but im so happy "dklue" gave me the BLOB concept idea! heheheh i guess i learned something new now..
Ohh.... Help please!!
I was flashing rom but I skipped a step and end does not pass the white HTC screen.
The fact is that it was installing the rom and Gapps but I miss the boot.img I have it on PC, the problem is that as the phone will not start, i can enter to bootloader but does not recognize the pc, I get the normal bootloader but how i do to pass the boot.img again if the phone does not recognize it??
And sorry for my bad english---- Help please!
rikrdoVe said:
Ohh.... Help please!!
I was flashing rom but I skipped a step and end does not pass the white HTC screen.
The fact is that it was installing the rom and Gapps but I miss the boot.img I have it on PC, the problem is that as the phone will not start, i can enter to bootloader but does not recognize the pc, I get the normal bootloader but how i do to pass the boot.img again if the phone does not recognize it??
And sorry for my bad english---- Help please!
Click to expand...
Click to collapse
If you can get into the recovery and have a valid backup then in that case restore it and restart the process. Else you can boot into fastboot and flash the desired boot.img the process will be
adb reboot-bootloader
fastboot flash boot boot.img
fastboot reboot
ethanon said:
If you can get into the recovery and have a valid backup then in that case restore it and restart the process. Else you can boot into fastboot and flash the desired boot.img the process will be
adb reboot-bootloader
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
adb reboot bootloader
ethanon said:
If you can get into the recovery and have a valid backup then in that case restore it and restart the process. Else you can boot into fastboot and flash the desired boot.img the process will be
adb reboot-bootloader
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Sorry bro, I'm ignorant in android... To use adb i need android sdk tools? What i need?
rikrdoVe said:
Sorry bro, I'm ignorant in android... To use adb i need android sdk tools? What i need?
Click to expand...
Click to collapse
rikrdoVe said:
Sorry bro, I'm ignorant in android... To use adb i need android sdk tools? What i need?
Click to expand...
Click to collapse
Well you do need to have the Android SDK tools download but if you select the "Platform Tools" at the SDK manager , that will only install the platform tools on your hard disk. and yes the device drivers needs to installed , to work with ADB ,
Any ways this tutorial by LUCKY_THIRTEEN just might help you
http://forum.xda-developers.com/showthread.php?t=2213910
ethanon said:
Well you do need to have the Android SDK tools download but if you select the "Platform Tools" at the SDK manager , that will only install the platform tools on your hard disk. and yes the device drivers needs to installed , to work with ADB ,
Any ways this tutorial by LUCKY_THIRTEEN just might help you
http://forum.xda-developers.com/showthread.php?t=2213910
Click to expand...
Click to collapse
I cant install sdk and use adb... I resume: Dowloaded sdk from the page, and when i start sdk manager "Platform Tools" cant update i got this error: Stopping adb server succeeded. Failed to rename directory C:\adt.bundle.windows-x86-20131030\sdk\platform-tools to C:\adt.bundle.windows-x86-20131030\sdk\temp\PlatformToolPackage.old01. Nothing was installed"
I dont know if sdk was installed or what. only have the folder in C:
I put the boot.img file in platform-tools and tried to flash the image using the command fastboot flash boot boot.img but tells me the boot.img arrchivo not be found.
The phone does not recognize the pc, the bootloader is relocked.
Thanks for your support bro, I would like resolve this as soon as possible.
rikrdoVe said:
I cant install sdk and use adb... I resume: Dowloaded sdk from the page, and when i start sdk manager "Platform Tools" cant update i got this error: Stopping adb server succeeded. Failed to rename directory C:\adt.bundle.windows-x86-20131030\sdk\platform-tools to C:\adt.bundle.windows-x86-20131030\sdk\temp\PlatformToolPackage.old01. Nothing was installed"
I dont know if sdk was installed or what. only have the folder in C:
I put the boot.img file in platform-tools and tried to flash the image using the command fastboot flash boot boot.img but tells me the boot.img arrchivo not be found.
The phone does not recognize the pc, the bootloader is relocked.
Thanks for your support bro, I would like resolve this as soon as possible.
Click to expand...
Click to collapse
Well it seems you have installed the Android SDK all right. and make sure you put the file in the platform tools folder, and also make sure you have installed the HTC drivers for your PC to detect your phone , you can also try uninstall the driver and re install
ethanon said:
Well it seems you have installed the Android SDK all right. and make sure you put the file in the platform tools folder, and also make sure you have installed the HTC drivers for your PC to detect your phone , you can also try uninstall the driver and re install
Click to expand...
Click to collapse
Ok, i updated Platform-Tools to rev. 19.0.1, I had to start windows in safe mode.
But, yestarday Android sdk tools appeared in the list of installed programs in windows, i uninstalled and install today again but now i dont see sdk in list. Anyway, i open cdm and type "adb reboot-bootloader" and it says "error: device not found".
Then y type: fastboot flash boot boot.img and it says "error: cannot load boot.img"
I put the boot.img in C:\adt-bundle-windows-x86-20131030\sdk\platform-tools
And now... I dont know what to do
rikrdoVe said:
Ok, i updated Platform-Tools to rev. 19.0.1, I had to start windows in safe mode.
But, yestarday Android sdk tools appeared in the list of installed programs in windows, i uninstalled and install today again but now i dont see sdk in list. Anyway, i open cdm and type "adb reboot-bootloader" and it says "error: device not found".
Then y type: fastboot flash boot boot.img and it says "error: cannot load boot.img"
I put the boot.img in C:\adt-bundle-windows-x86-20131030\sdk\platform-tools
And now... I dont know what to do
Click to expand...
Click to collapse
Install the windows drivers , better try installing the the HTC sync manager. that way your device will be detected.
ethanon said:
Install the windows drivers , better try installing the the HTC sync manager. that way your device will be detected.
Click to expand...
Click to collapse
Ready, installed the HTC Sync Manager, and same result. "Device not Found"
if only I could get the phone to be recognized by the pc, I think it could solve the problem.
rikrdoVe said:
Ready, installed the HTC Sync Manager, and same result. "Device not Found"
if only I could get the phone to be recognized by the pc, I think it could solve the problem.
Click to expand...
Click to collapse
From where are u trying the commands.............
u must put ur phone in recovery mode.......
Connect ur phone to PC......
from the platform-tools folder try "adb devices"........
The adb commands will work in recovery only........
in bootloader the fastboot commands will work..........
[email protected] said:
From where are u trying the commands.............
u must put ur phone in recovery mode.......
Connect ur phone to PC......
from the platform-tools folder try "adb devices"........
The adb commands will work in recovery only........
in bootloader the fastboot commands will work..........
Click to expand...
Click to collapse
The phone is not recognized by the pc.
I can not get into recovery because the bootloader is relocked. I can only enter fastboot, but when executing commands, either with adb, All in One Toolkit, Flasher Venom or the phone is not recognized "Error: Device not found"
I have the drivers installed, htc sync manager, and I'm afraid that this phone unusable ... Also I did have a backup but on PC, but if the phone is not recognized I can not run any command ...
Also, I was trying to run teh Stock RUU:
RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed
But When I run the. Exe signature throws an error (132) "find the correct signature and try again" and which is not correct. had sense 5 and 4.2.2 HTC One X + International.
Help please ... : (
same issue, cannot access recovery fastboot only
I hope this adds to this post if I miss speak I apologize in advance but I do not have the time or knowledge to post 10 times before strating my own thread so if this doesn't add value to this post, I have been reading and researching all week and now that I cannot use my phone I must intensely focus on this until it is fixed
Fed up with 4.3 and lower limitations and looking to get my monies worth on my phone, I look to upgrade to 4.3.1 or higher just started this week so I am a total newb, and if it means anything to anyone I would be happy to donate to contributors via papal once a solution is found I am a working professional and I am happy to pay you to save my time/phone
with that said here is what I have done
HTC One X+ (AT&T US) Quad Core Tegra 3
OTA upgraded 4.2.2 Android Firmware 2.15
Unlocked BL via HTCDev
Was using;
Recovery-clockwork-6.0.3.7-enrc2b.img
With intent to upgrade to 4.3.1
Used the following Rom and GAPPS to load .zips via CWM
cm-10.2.1-enrc2b (stable)
gapps-jb-20130813-signed.zip
Did not work
Tried more recent gapps
Did not work got stuck on Circling Cyanogenmod screen
//goo.gl/YzZ75o
THEN
I realized I was not flashing boot.img taken from the CM 10.2.1 zip so I followed directions to use the boot.img then load the zip files, since doing this I can no longer use my recovery
Erase Cache (from fastboot)
COMMANDs:
./fastboot erase cache
./fastboot reboot-bootloader
Results:
White HTC “Quietly Brilliant” Screen for a few seconds then turns off
Plug in charger and Red light turns on grey empty battery symbol appears with a lightning bolt inside then disappears
red light turns off :-/
//goo.gl/JrBJph
Current state: I can fastboot, but I cannot load recovery
//goo.gl/43F6XT
Also, if I can get back into recovery
The last time I was in it, last night I believe I reformatted my internal SD, because when I was looking for my backup, and my zips they were all gone...I was very tired and should haven't pushed it.
I don't care about loss of data I just need to get my phone working again, thanks for your time and careful considerations
UPDATE+++
Used WinDroid HTC One X+ Toolkit 3 to flash custom recovery CWM 6.0.3.7 back in recovery again, now I think I need to side load a ROM because I deleted what I had internally
cclifford81 said:
I hope this adds to this post if I miss speak I apologize in advance but I do not have the time or knowledge to post 10 times before strating my own thread so if this doesn't add value to this post, I have been reading and researching all week and now that I cannot use my phone I must intensely focus on this until it is fixed
Fed up with 4.3 and lower limitations and looking to get my monies worth on my phone, I look to upgrade to 4.3.1 or higher just started this week so I am a total newb, and if it means anything to anyone I would be happy to donate to contributors via papal once a solution is found I am a working professional and I am happy to pay you to save my time/phone
with that said here is what I have done
HTC One X+ (AT&T US) Quad Core Tegra 3
OTA upgraded 4.2.2 Android Firmware 2.15
Unlocked BL via HTCDev
Was using;
Recovery-clockwork-6.0.3.7-enrc2b.img
With intent to upgrade to 4.3.1
Used the following Rom and GAPPS to load .zips via CWM
cm-10.2.1-enrc2b (stable)
gapps-jb-20130813-signed.zip
Did not work
Tried more recent gapps
Did not work got stuck on Circling Cyanogenmod screen
//goo.gl/YzZ75o
THEN
I realized I was not flashing boot.img taken from the CM 10.2.1 zip so I followed directions to use the boot.img then load the zip files, since doing this I can no longer use my recovery
Erase Cache (from fastboot)
COMMANDs:
./fastboot erase cache
./fastboot reboot-bootloader
Results:
White HTC “Quietly Brilliant” Screen for a few seconds then turns off
Plug in charger and Red light turns on grey empty battery symbol appears with a lightning bolt inside then disappears
red light turns off :-/
//goo.gl/JrBJph
Current state: I can fastboot, but I cannot load recovery
//goo.gl/43F6XT
Also, if I can get back into recovery
The last time I was in it, last night I believe I reformatted my internal SD, because when I was looking for my backup, and my zips they were all gone...I was very tired and should haven't pushed it.
I don't care about loss of data I just need to get my phone working again, thanks for your time and careful considerations
Click to expand...
Click to collapse
ummm your flashing the X+ International CM rom and not the evitareul one, reboot into the bootloader and then enter recovery from there.
Lloir said:
ummm your flashing the X+ International CM rom and not the evitareul one, reboot into the bootloader and then enter recovery from there.
Click to expand...
Click to collapse
Will do, thanks!
evitareul? Does that mean Flash TWRP recovery and then use evita ROM?
cclifford81 said:
Will do, thanks!
evitareul? Does that mean Flash TWRP recovery and then use evita ROM?
Click to expand...
Click to collapse
Evitareul = X+ AT&T
Sent from my Nexus 5 using Tapatalk
Lloir said:
Evitareul = X+ AT&T
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ok so I just need the evitareul Rom, I'm looking for it now, I just need something stable at 4.3 or higher with GAPPS anyone have any links
cclifford81 said:
Ok so I just need the evitareul Rom, I'm looking for it now, I just need something stable at 4.3 or higher with GAPPS anyone have any links
Click to expand...
Click to collapse
look in original development
Lloir said:
look in original development
Click to expand...
Click to collapse
Ok, from what I can tell I think I have to go with this?
[ROM][2/18/2014][AT&T X+ S5 eXtreme V1.0.3.3]
I will be very happy if I can get this to work, and I will just "stay tuned" for when I can flash a stable 4.3 or higher for my phone
Under downloads I see the following: (would post picture but still too n00b)
S6 eXtreme RC1
S5 RC2 Patch
Native WiFi
Hotspot Patch
S5 eXtreme
V1.0.3.2
S5 eXtreme
V1.0.3.3
I am not sure what to download here, I will continue reading these directions as I believe this is my best option, please confirm if I am on the right path, thanks guys!
Update+++
Downloaded S5_eXtreme_V1.0.3.3_Signed.zip
about to flash this ROM, is GAPPS included in this?
Update+++
Downloaded S5_eXtreme_V1.0.3.3_Signed.zip Rom
Extracted the boot.img file and followed instructions
Extract boot.img from zip file and place in your sdk platform tools folder, (or wherever your adb tools are located)reboot device to bootloader and connect it to your PC.
From a command prompt type:
1. fastboot flash boot boot.img
2. fastboot erase cache
reboot to recovery and flash ROM.
but I am not sure how I flashed the ROM, I tried sideloading from recovery with WinDroid HTC One X+ Toolkit, before and after and it said no package loaded
Then I tried to load from fastboot, finally I figured "well I might as well reboot" and amazingly enough it booted...not sure what exactly but I am back on 4.2.2 so thank you!