Related
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to threads like TalynOne's The Titan Internal GPS FAQ (01/30/2008) located here...http://forum.xda-developers.com/showthread.php?t=363431
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
xweaponx said:
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to other GPS threads...
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
Click to expand...
Click to collapse
I flashed this ROM and I have since, jumped to DCDs version of it, and then back to 2.17.
I have, and apparently, a lot of folks have had inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
The odd thing is that I have loaded new ROMS (including the current Sprint OEM ROM) and I'm still having that problem. (I'm taking suggestions to resolve this)
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
On a kinda more positive note...
GPS worked well (when the EVDO connection did)
New Apps sucked up more of our previous RAM, but I didn't have any
latency or freeze ups.
I myself am experiencing a number of problems with the new ROM version, and will be downgrading to 2.17 soon. It took 3 installations of the new ROM to get the GPS to work. Since then, I've experienced several performance issues, including multiple times where the phone will freeze during web browsing in Opera Mobile. Sometimes, the phone won't even freeze, but will come up with a screen saying that the system memory is low, even when I'm only running Opera Mobile, it'll ask me to close either "Opera Mobile" "Phone" "Phone" or "Phone". Weird? I think so...
Also, there are times where I won't even get the internet to work. I'll have to either go in to the connections menu and disable the data connection, or do a soft reset of the phone completely.
In my opinion, it's probably more trouble than I really need to go through. I will be downgrading to 2.17 until the official release comes out.
Same issues for me:
inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
Spent 30 min with VZW level 2 support today. I called due to ##debug HDR an/aaa was = 0.. I was under the impression was supposed to be set to 1. They did look at my SSDR (I think he said that) and found it had a small issue with the authentication (still reads =0), but after he fixed that I still have issues. My HDR RDX power goes from -71db to -96db.
I also noticed every time I call the phone changes from EV to 1x. I know you don't use EV to make voice calls, but I did not remember (key word) seeing it switch like that before. Maybe someone with 2.17 1.40 radio can confirm.
I have thought about moving back too, but my call ticket history is getting pretty long with VZW and if I needed another A-key (yes I have one written down) it may start to look strange.
I'm on sprint and when I tried to update I was stuck on boot loader so I went online and switched esn over to my Treo for the time being as I worked on my Mogul. Eventually I got to load the rom fully and switched esn back. I noticed afterwards that my internet was only locking at 1x. Upon restart it would say EV but anytime it is connected to the net it is 1x. DSLreports clocked it at 50-90kbps so I know as definitely getting 1x speed. Reloaded the rom several times and still the same. This went on for 2 days. Eventually called Sprint and told them of my problem. They noticed that I was still on the regular Vision plan but I have always been able to connect to EVDO speeds so I never thought that was an issue. They updated me to Power Vision and right after I started getting EVDO speeds. I'm not sure if it was because of the change or maybe a restart of my data service that did the trick.
2 other issues I'm having is I noticed my phone is a little slow with this ROM. Opening programs etc. Sometimes the program using GPS like Live Search or GPS Viewer will lock up temporarily. The 2nd issue is what some are also reporting regarding signal. I noticed I get 1 to 2 less signal bars.
Overall 3.16 has been "ok". No problems with flashing really, and memory usage is "ok", I'm averaging around 17-18mb free with no apps running. It's not exactly the 20-22mb I had free with my prior custom rom, but enough to get by.
I'm not having problems with phone freezes or out of memory errors. I am, however, having some problems with BT and with net connectivity.
Data: I'm using Schap's Advanced config tool, version 1.1, and I've selected the option to keep my 'net connection live all the time. Unfortunately, this is not working, and I'm finding that throughout the day my connection goes down. With my prior custom rom, if I was streaming audio content over evdo or 1x, the connection would stay alive as long as the audio program was running, barring a loss of cell signal. Now I'm finding that about once an hour my data connection goes down and interrupts my audio stream.
BT: I have a Plantronics 320 headset, which worked flawlessly (albeit with less than stellar audio quality) with my prior rom. With 3.16, the volume and sound quality are much improved, BUT I am not able to answer calls on my headset. If I initiate a call with BT on, no problems, I can talk till the call is over, then press the headset hard button to hang up. If I *receive* a call, however, when I press the headset hard button to answer, the call is answered, but the audio is not directed to the headset. Instead, it routes to the handset.
GPS works well with TeleNav, GoogleMaps, Live, and generally locks onto 5-7 satellites within about 60 seconds if I'm somewhere with a clear view of the sky.
I tried using GPS2Blue to redirect the GPS data to a BT comm port. When I have BT enabled and attempt to redirect, GPS2Blue says BT port not open, waiting for BT port to open. If I go into comm manager and turn BT off, then GPS2Blue says BT port is open, and begins to wait for a BT connection to my laptop. If I go back into comm manager, the BT icon has been grayed out as if BT is off, but the little circled "X" icon is not superimposed over the BT icon as it would be when BT is off. If I click the icon again, it acts as if BT is being enabled, but the icon doesn't change, and the BT LED does not begin to blink. Don't know if it's a problem with GPS2Blue software or something else. Wish it would work cleanly, I'd love to use my 6800 as a BT GPS receiver for my laptop.
ETA: I've seen a few folks mention that when they answer a voice call their 6800 switches from Evdo to 1X. I'm wondering if this might be a way of implementing simultaneous voice & data. Has anyone tried taking a call and browsing the web simultaneously? I think this may be dependant upon network services in your area, so this may only work for folks in big cities with the most advanced network features, if it works at all...
ETA2: Just tried the above, and I'm getting the usual message that data connections cannot be initiated while on a voice call. I'm in a large city that *should* have all the latest network features, so if it dual voice/data was possible with this radio then it should work here. I'm assuming it's not presently possible, based on my experiment, but I'd be happy to be proven wrong.
with the sprint rom a ton of us have no audio out using an adaptor to listen through headphones
http://forum.xda-developers.com/showthread.php?t=363087
is a big thread about this going on the main board.
Took the plunge and installed the "stock" 3.16 on both my phone and a friend's last night. The first thing I want to note is that it went extremely smooth. No issues to note. It took a bit too long for my liking but it was fine. I didn't have to modify any MSID or MSN data - my phone worked fine right off the bat. Data was hosed, but a quick client-initiated IOTA Programming fixed that. (Settings, Personal, Phone, Services, Internet, Get Settings)
I have two constantly pinging(one 15 mins, one 30) e-mail accounts(one imap, one Exchange) that must keep my data connection alive. I haven't noticed a single decline in my data rate, nor a problem with disconnections. Then again, I live in NYC, which may make a difference.
GPS sucked last night - I couldn't get a satellite to save my life. On the way to work today, though, it was perfect. 4 satellites found in GMaps and tracking worked great.
I'm pretty happy w/the new additions to PocketOutlook too. Has anyone noticed that Gmail's IMAP works perfectly now, and that when you have multiple accounts - hitting messaging (when it's previously closed) brings up a choice of which account to go to? SWEET!
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
So the phone made me out to be a liar. The LiveSearch download from wls.live.com failed now. It definitely worked last night on my roommate's phone however. Hrm. I downloaded it from my pc and emailed it to myself and it actually downloaded. That's odd.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
I didn't try with the ROM update, but I did experience this with Live Search.
New Rom
Vinny75 said:
I didn't try with the ROM update, but I did experience this with Live Search.
Click to expand...
Click to collapse
Had trouble getting my phone to flash, because I flashed the radio before the rom. Once I got phone going is working perfect. Hooked up to pda net on laptop downloading at 1.7 uploading at 500K. Use Holux to get gps started all programs work, Tom Tom is more accurate with my mogul compared to the external gps. Have not tried my s9 headphones yet. Running the DCD beta and I have no complaints except for the memory. Phone quality is the same.
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
I was running Custels V1.1 2.14 and radio 1.47.00. I had my data set to connect all the time (which never idled btw...)and had Ev service everywhere. After installing Dcd's 3.16 & radio 3.27 I first recieved the "twin towers"... One had data connection and the other looked like the searching-for-signal tower. Plus my roam indicator was constanlty blinking.
After searching the forums, a helpful soul recommended *228 then press 3 which programs your phone. Remember that you are not upgrading to a new phone.
I then *228 and pressed 2 this time to program the latest PRL (which was 30029 before and still then). After searching some more, I saw that there was indeed a newer PRL which is 40029 (link in the first thread). I downloaded the PRL to my Sd card, dialed **775, entered my Alltel Unlock Code of 000000 and and the first screen I saw was update prl. Click on "Menu" in bottom right and hit the "Edit" button. Now you should see a empty value with "Browse" below it. Browse to the location where you placed your prl, upload and if you exit out correctly, you should be soft resetting your device.
After completeing the steps above, my roaming triangle was gone as well as the extra tower. I still have my data constantly on with Ev coverage all the time but my data actually idles now. Call quality has been noticed by myself and others as clearer and louder than before.
That Reg Entry doesnt exist on mine.
TalynOne said:
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
Click to expand...
Click to collapse
Mine has the following instead:
"HKCU\ControlPanel\PhoneExtendFunction\CDMA\VoicemailIcon
Value name:BtnDN_LAND Value data:Windows\_VoicemailBtn1_Land.bmp" and three other similars.
Should that entry be added in it's entirety or should I remove my current entries? Any body else find they have entries like mine?
I thought I had that problem at first, but when I looked more closely, the reg entry is *in* the CDMA folder, not in a sub-folder below CDMA.
!!Major Bluetooth Issue!!
recently installed DCD's new GPS enabled ROM for Verizon. Everything has been working well even the GPS !!EXCEPT!! Bluetooth OBEX. When I try to send / beam any type of file my XV6800 stops responding and I am forced to soft reset.
I don't know if this only affects the Verizon ROM or all carriers for that matter. Is there any one here that has a fix or know's of a fix to resolve this issue? Has DCD released any news on this? I would Gladly appreciate it, as all the people with this issue.
Searching For Service
I loaded the Sprint Test Rom. No when ever I boot my phone it takes ~4 minutes for the phone to lock onto the network.
You are may differ with this situation....
PRL's didn't change. Even reloaded 60610. EVDO roaming is gone. Guess they didn't like people forcing their phone to roaming in areas where Alltel has EVDO and Sprint doesn't. 60611 also removed EVDO roaming in my area. 60610 and 2.17 work fine with EVDO roaming.
CardExport & the My Documents-redirect-to-SD-card reg tweak:
HKLM\System\StorageManager\Profiles\SDMemory
change the value of the string "Folder" to "My documents"
no longer work.
My installation has been working fine and I even managed to increase battery life by installing "Juice".
Suddenly, about 3 days ago I noticed the phone was saying no signal. I was clearly getting data, as my apps worked and I was getting eMail alerts and downloads, but no calls.
I tried restarts, but to no avail. I am using Rod_100 UK as I am on Vodafone UK... I assume it is correct, certainly worked for the past month.
I have had to revert back to Windows Mobile.
My immediate thoughts are it is Juice that is causing it. I have just logged back in to my XDAndroid to write this and Juice did not load, and guess what, the signal has come back.......
Just in case is there anything else to look for?
Never heard of "Juice". I have heard of JuiceDefender however...
If you don't have the issue on a clean install, I'd say that app (or one of many I'm assuming you have installed) is the culprit. Rename your data.img and boot, see what happens.
Yes, it is JuiceDefender, apologies for the abbreviation.
I un-installed it and I have network again, but I guess I will loose battery longevity again, not that it made a huge difference.
I'll keep my eye on it....
Still no improvement
No, still not working. I get no signal, when I am in eye shot of a mast and on WM I get a full signal. I am booting in to WM to a deluge of SMS messages that I had not received, mostly vMail notifications, to which the messages are from calls that I did not receive.
The radio is not as strong and keeps dying on me requiring a reboot
I dont know what exactly but some program is giving android problems
jonners59 said:
No, still not working. I get no signal, when I am in eye shot of a mast and on WM I get a full signal. I am booting in to WM to a deluge of SMS messages that I had not received, mostly vMail notifications, to which the messages are from calls that I did not receive.
The radio is not as strong and keeps dying on me requiring a reboot
Click to expand...
Click to collapse
All I can say is do the standard mess.
Make sure you're up to date.*
Delete (move, rename) data.img.
Format SD. Full format. HP tool.
*There's a lot of testing stuff flying around right now too, making that difficult admittedly. Hopefully the auto-build service will return soon, and all the madness will get committed soon!
Check in your startup file forcecdma=0. I had that problem too.
wormy315 said:
Check in your startup file forcecdma=0. I had that problem too.
Click to expand...
Click to collapse
The command is force_cdma=X....
arrrghhh said:
The command is force_cdma=X....
Click to expand...
Click to collapse
OK, I have tried deleting the data.mag
Didn't work
Have just changed "force_cdma=0" to "force_cdma=X" Will see if this works and feed back
My gut feeling is it is something to do with "JuiceDefender".
jonners59 said:
OK, I have tried deleting the data.mag
Didn't work
Have just changed "force_cdma=0" to "force_cdma=X" Will see if this works and feed back
My gut feeling is it is something to do with "JuiceDefender".
Click to expand...
Click to collapse
Uhm, you replace X with a value. 0 if you're GSM, 1 if you're CDMA....
arrrghhh said:
Uhm, you replace X with a value. 0 if you're GSM, 1 if you're CDMA....
Click to expand...
Click to collapse
Well I took it literally, as I have no idea, sorry. I'll put it back... Anyway, I have another problem now anyway. Having made the change it will not boot. I checked the permissions and it is not "Executable" any more. I have tried changing it but it will not let me. How do I fix this - I am accessing via my laptop which is Ubuntu (Linux).
Can you help, please?
jonners59 said:
Well I took it literally, as I have no idea, sorry. I'll put it back... Anyway, I have another problem now anyway. Having made the change it will not boot. I checked the permissions and it is not "Executable" any more. I have tried changing it but it will not let me. How do I fix this - I am accessing via my laptop which is Ubuntu (Linux).
Can you help, please?
Click to expand...
Click to collapse
What is not "Executable" any more... haret.exe?
The startup file
Sorry, ignore me.
After the change, I double clicked the Android shortcut to launch Android, but it would not start, so I assumed the file had to be executable (as it was the only item I had changed)... I had forgotten to disconnect my TP2 from my laptop!
I've done so now and it has launched. A stupid user errorhttp://media.xda-developers.com/images/smilies/biggrin.gif
I'll keep you posted on any changes.
Ha, fair enough. Enjoy.
Solved. Keep loosing Radio
OK. I tried all the above. Delete data.img, and check the startup script/cmd.... none worked. At some point I would loose the network connection.
As it started within days of loading JuiceDefender and its components and from the description of how it works - controls the running apps including radio and data transfer, I always suspected it to be the root cause. After the other checks failed I tried removing all Juice Defender apps and since then c30hrs I have not experienced any loss of communication.
Thanks everyone for your help, and I hope this will be of use to anyone else suffering from loosing radio/ signal.
jonners59 said:
OK. I tried all the above. Delete data.img, and check the startup script/cmd.... none worked. At some point I would loose the network connection.
As it started within days of loading JuiceDefender and its components and from the description of how it works - controls the running apps including radio and data transfer, I always suspected it to be the root cause. After the other checks failed I tried removing all Juice Defender apps and since then c30hrs I have not experienced any loss of communication.
Thanks everyone for your help, and I hope this will be of use to anyone else suffering from loosing radio/ signal.
Click to expand...
Click to collapse
It has been a number of days now and I have not experienced the same issue, so my conclusion is that it is the JuiceDefender that caused the problem.
The down side now is that I get 7am to 4pm battery life as opposed to 7am to 7pm.... But atleast I can receive and make calls!
A note: The signal strength on the project image is not as strong as the WM6.5, but I am sure that is a known issue.
jonners59 said:
It has been a number of days now and I have not experienced the same issue, so my conclusion is that it is the JuiceDefender that caused the problem.
The down side now is that I get 7am to 4pm battery life as opposed to 7am to 7pm.... But atleast I can receive and make calls!
A note: The signal strength on the project image is not as strong as the WM6.5, but I am sure that is a known issue.
Click to expand...
Click to collapse
Hrm, didn't realize that app would help out that much. But, it makes sense if it's turning off all your radios lol.
Anyhoo, have you seen the kernel I posted from WisTilt2? It has full panel collapse, and battery life is astounding with it.
Code has yet to be committed, as he still has some work to do for the AUO panels (select RHOD100's basically) - so unless you have one of those you can reap the benefits of his new code .
(bzo got nearly 65 hrs with the radio on, sync off - 100% sleep.)
Looks interesting, but where do I download the latest version... I don't plan reading all the threads! And IF I installed would I loose all my settings and apps?
Update
It has been a while since I did all this tinkering, during which time there has been an update.
What I find I get is sometimes (c every couple of days) the meter says I have signal but nothing connects with a message "no network". Also, but far more frequent, as with today where it has occurred 3 times, I dial a number and nothing happens. It says ringing but there is no ring tone and it never seems to connect. I then shut the call down either by using the hang up button or the soft hang up key. The screen then changes to "Hanging Up" but again sits there indefinitely. The only solution id to do a restart.....
Any ideas?
PS: any news on when the bluetooth and camera will be working...?
I have found that any app that acts as a task killer of any sort (juice defender must in someway stop apps to save battery) can also kill your connection. I found this out while using xdandroid and it became immiediately clear when I stopped using the task killer my bars and data proved to be more consistant! Hope that helps.
-------------------------------------
Sent via the XDA Tapatalk App
I recently flashed on cm7 on my aria. it is great but my data usage began shooting up. i realized it was due to the fact that everytime i lock my phone, it disables my wifi (i saw this because everytime i unlock im on 3g for a 1-2 seconds then i get on wifi so that means that the whole time my phone is locked it uses 3g data ) is there anyway i can prevent this from occurring??
Thanks,
Okachowwa
Menu -> settings -> wireless & networks -> wi-fi settings -> menu -> advanced -> wi-fi sleep policy -> never
I think that's it.
Sent from my Aria - CM7 Build 24
okachowwa said:
I recently flashed on cm7 on my aria. it is great but my data usage began shooting up. i realized it was due to the fact that everytime i lock my phone, it disables my wifi (i saw this because everytime i unlock im on 3g for a 1-2 seconds then i get on wifi so that means that the whole time my phone is locked it uses 3g data ) is there anyway i can prevent this from occurring??
Thanks,
Okachowwa
Click to expand...
Click to collapse
Have you checked the Wifi Settings to see which sleep option is selected? There is an 'Never' option which tells wifi to stay on even when the phone sleeps.
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
klbmth said:
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
yup...that's why you just turn your wifi off with the notification widget (very simple and painless might I add) if you know you're leaving the house...what's the point of having wifi enabled if you're not in range of your network? all it's going to do is drain your battery. i left my wifi enabled one day when i sent to work and within half the day i had ~12% battery life...definitely not good practice to leave it enabled that's my 2 cents, do as you wish though. to each his own.
klbmth said:
One thing I noticed its that if I leave my house I have to turn off wifi and turn it back on to find my router.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Yup, I have the same issue with CM7 nightlies. This worked flawlessly in CM6 and stock2.1. So far there isn't a viable solution.
from the CM6.1.1 thread...
Q. How do I keep my wifi from going to sleep every time the screen shuts off?
A. There is a hidden feature that disables wifi sleep.
menu > Settings > Wireless & networks > wifi settings > menu (again) > advanced > Wi-Fi Sleep policy > Never > menu > Save
However: although you can keep the wifi service from sleeping, the wifi driver will still sleep on it's own after detecting no bus activity for a period of time.
Click to expand...
Click to collapse
mattbollenbach said:
from the CM6.1.1 thread...
Click to expand...
Click to collapse
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
I've had the same behavior on FR008 and the stock ATT 2.1 load as well. When Wifi is in that on but not really connected state some apps can wake it up...the default browser usually will, but Listen would not. I just gave up and only turn on wifi when I need it.
kinggrowler said:
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
Click to expand...
Click to collapse
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
zervic said:
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
Click to expand...
Click to collapse
Well, just because people don't work exactly like you work, does not mean they are doing it wrong. If something is broken I'm going to call it out. I might be incorrect, but let's be clear: you aren't questioning that wifi in CM7 isn't working the way it did in CM6, you are questioning my behavior -- which is a weak argument.
I guess you don't understand the issue, so I'll spell it out:
Wifi worked flawlessly and automatically for me in stock 2.1 AND CM6. This automatic behavior does not work in CM7. Manually toggling something that simply "just worked" before is a regression, not a feature. Hence the reason I point it out -- the devs can't fix something unless they know it's broken, and I seriously doubt the devs are able to test all/every permutation. I have nothing but respect for the work they do, thus my very respectful tones in my earlier posts. I've had no indication that the devs are unwilling to get feedback about their work.
You asked a question though, and here is the answer:
I leave Wifi on all the time because I'm a consultant -- I work in many different locations throughout the week, travelling the country. I have dozens of wifi networks saved on my phone, and it is useful for me to have my phone automatically jump on the correct, nearest network. I'd rather use free wifi instead of paying AT&T for data charges. It is not always possible for me to remember I'm in a location with a known wifi network, or to remember to manually toggle wifi settings: it is useful for me to have this happen in the background. Sometimes I'm on a call, sometimes I'm heading into a meeting and I'd rather not mess with my phone. I want wifi to be on all time, scanning for the correct network, and jumping on it when it's in range.
Outrageous, right?! Not actually -- this is the existing behavior in CM6 and stock 2.1. From my standpoint, wifi just worked -- I didn't have to think about it, didn't have to manually toggle something to prevent AT&T data charges.
This is desired behavior for me, and I'm happy with rolling back to CM6 to get it. I understand that _you_ don't need this behavior, but that doesn't mean it's wrong. It just means the world is bigger than you realized.
And yes: wifi in CM7 (beta) is currently broken. Read the threads. Many people are having problems with it.
zervic said:
yup...that's why you just turn your wifi off with the notification widget (very simple and painless might I add) if you know you're leaving the house...what's the point of having wifi enabled if you're not in range of your network? all it's going to do is drain your battery. i left my wifi enabled one day when i sent to work and within half the day i had ~12% battery life...definitely not good practice to leave it enabled that's my 2 cents, do as you wish though. to each his own.
Click to expand...
Click to collapse
That's a good tip, I feel kind of dumb for not thinking about it lol and I also agree that it is good practice to do so. I just wanted to point it out in case a dev was going through this thread which is relevant to the topic.
Sent from my Liberty using XDA App
kinggrowler said:
Well, just because people don't work exactly like you work, does not mean they are doing it wrong. If something is broken I'm going to call it out. I might be incorrect, but let's be clear: you aren't questioning that wifi in CM7 isn't working the way it did in CM6, you are questioning my behavior -- which is a weak argument.
I guess you don't understand the issue, so I'll spell it out:
Wifi worked flawlessly and automatically for me in stock 2.1 AND CM6. This automatic behavior does not work in CM7. Manually toggling something that simply "just worked" before is a regression, not a feature. Hence the reason I point it out -- the devs can't fix something unless they know it's broken, and I seriously doubt the devs are able to test all/every permutation. I have nothing but respect for the work they do, thus my very respectful tones in my earlier posts. I've had no indication that the devs are unwilling to get feedback about their work.
You asked a question though, and here is the answer:
I leave Wifi on all the time because I'm a consultant -- I work in many different locations throughout the week, travelling the country. I have dozens of wifi networks saved on my phone, and it is useful for me to have my phone automatically jump on the correct, nearest network. I'd rather use free wifi instead of paying AT&T for data charges. It is not always possible for me to remember I'm in a location with a known wifi network, or to remember to manually toggle wifi settings: it is useful for me to have this happen in the background. Sometimes I'm on a call, sometimes I'm heading into a meeting and I'd rather not mess with my phone. I want wifi to be on all time, scanning for the correct network, and jumping on it when it's in range.
Outrageous, right?! Not actually -- this is the existing behavior in CM6 and stock 2.1. From my standpoint, wifi just worked -- I didn't have to think about it, didn't have to manually toggle something to prevent AT&T data charges.
This is desired behavior for me, and I'm happy with rolling back to CM6 to get it. I understand that _you_ don't need this behavior, but that doesn't mean it's wrong. It just means the world is bigger than you realized.
And yes: wifi in CM7 (beta) is currently broken. Read the threads. Many people are having problems with it.
Click to expand...
Click to collapse
fyi CM6 & 2.1 != CM7. Your argument is null & void.
Also, being a "consultant" and the very important man you are, flashing a rom that's not even in beta stages yet probably isn't the best idea you've ever had.
zervic said:
Also, being a "consultant" and the very important man you are, flashing a rom that's not even in beta stages yet probably isn't the best idea you've ever had.
Click to expand...
Click to collapse
Why do you remind us that the rom is in a beta stage? "Beta" implies it is not fully functional, but your argument all along has been that it works perfectly....
Look, it's clear you haven't actually understood any of my posts. I'm highlighting error messages or erratic behavior I see in logcat running CM7. I've posted what I've seen so the devs can take action, or not, as they choose. Since you aren't in that audience I don't understand what your beef is.
Oh wait! Straw man arguments; personal attacks; logical fallacies: I've been dealing with either a highschool student or a troll - not sure which.
zervic said:
fyi CM6 & 2.1 != CM7. Your argument is null & void.
Click to expand...
Click to collapse
...although I have a strong suspicion.
kinggrowler said:
Why do you remind us that the rom is in a beta stage? "Beta" implies it is not fully functional, but your argument all along has been that it works perfectly....
Look, it's clear you haven't actually understood any of my posts. I'm highlighting error messages or erratic behavior I see in logcat running CM7. I've posted what I've seen so the devs can take action, or not, as they choose. Since you aren't in that audience I don't understand what your beef is.
Oh wait! Straw man arguments; personal attacks; logical fallacies: I've been dealing with either a highschool student or a troll - not sure which.
...although I have a strong suspicion.
Click to expand...
Click to collapse
First of all:
attn1 said:
Just because something does not work they way you'd like it to doesn't mean you've discovered a bug.
Click to expand...
Click to collapse
That being said. Beta does NOT necessarily imply that thing are not fully functioning, it simply implies that it hasn't been put into RC or stable. You can have a fully functioning beta program. HOWEVER, it may not be working properly. But creating a thread about an issue that's been brought up 20+ times now is pointless. I'm PRETTY sure the devs know about the issue, should it actually be an issue. Now that I just wasted another 15 seconds of my life, i'm going to casually /part from this thread and I'll end my post with this quote again, in case you didn't catch it the first time.
attn1 said:
Just because something does not work they way you'd like it to doesn't mean you've discovered a bug.
Click to expand...
Click to collapse
This is for OP and very important man of the day, kinggrowler:
http://forum.xda-developers.com/showpost.php?p=11171075&postcount=1054
and i'll even quote it directly for you:
attn1 said:
There are no broad wifi issues to resolve, and I do not plan to change the wifi driver one iota. I am using the one that works right for most people, and flawlessly for me.
If you are not having such luck, then you need to look at your access point if you have already wiped data.
Really, the constant carping about wifi is absolutely pointless.
Click to expand...
Click to collapse
I believe the proper thing for me to say right now would be:
game. set. match.
Me too. I can't roam between networks, either. I have to disable and re-enable the wifi each time.
zervic said:
...what's the point of having wifi enabled if you're not in range of your network?
Click to expand...
Click to collapse
1) Because Google Maps uses known wifi hotspots to help establish your location.
2) So that you don't have to keep toggling wifi on and off when moving between hotspots (or home and work, for example).
3) To use the network notification feature (aka "notify me when an open network is available").
HTH
Edit: seems to be fixed in RC3!
zervic said:
What is the point of having wifi set to ON when you are not in range of a network? Hence why, if you are using CM7 or CM6, you should utilize the notification widget and turn wifi off if you know you're leaving the area of your network. It's simple. Things aren't ALWAYS going to work how YOU want them to work. Thing will not always be automatic. I think I quote attn1 when I say this, just because it doesn't work how you want it to work, does not mean it is broken.
Click to expand...
Click to collapse
i have try everything and still same issues with wifi. and i change the radio ( baseband ). still i am thinking of uninstalling it bc i dont have wifi
Sorry to tell you but that was with the old wifi stuff (every nightly up to build 25), which I had no problem with. The RC/nightlies have new wifi data made by jznomoney, which I have on and off problems with. Its working for most people but there are a handful who are having problems. I flashed ladios' kernel and my wifi is doing a lot better with the new RC/nightlies.
Signatures are fancy.
kinggrowler said:
I've made sure to set Wifi Sleep Policy to "Never" but that did not fix my wifi problems. What I see when I open Wifi Settings is a cycle of:
Code:
Scanning --> Connecting --> Disconnected... Scanning, etc
When I look in logcat it shows it attemping (in vain) to authenticate against the last wifi network I was using -- even though it is no longer in range (and clear across town). In a nutshell it is refusing to recognize the actual nearby network UNTIL I toggle wifi settings.
Click to expand...
Click to collapse
I've noticed something similar with CM7 on my Aria. When I leave the house and come back it doesn't always connect automatically and it will enter into this cycle of scanning, connecting, disconnected.
I had to reboot the phone to get it to stop the cycle and stay connected. I don't use a lot of data anyway but I still prefer to use wifi when available. Interestingly just now it wouldn't even see any of my neighbor's wifi networks at all which is odd.
[SIZE=+2]Questions and Troubleshooting specific to
CyanogenMod 10.1 and 10.2[/SIZE]
This is the place to share issues, ask questions and offer help.
Be sure to specify the exact filename of the build about which you are asking questions.
For fixes to common problems, see Post 3 of either development thread listed below.
Remember to use the thanks button in lieu of simply posting "Thank you".
Keep discussion focussed on CyanogenMod and not derivative ROMs or modifications.
Development threads:
[ROM][AOSP 4.2.2] CyanogenMod 10.1 Official
[ROM][AOSP 4.3] CyanogenMod 10.2 Official​
Read here for the rationale behind creating a separate Q&A thread for ROMs: Q&A Threads for ROMS / Kernels / Projects
FAQ
Q: Why create a special Questions and Troubleshooting thread for a specific ROM?
A: Much of the discussion in ROM development threads is not related to development, but rather problems with flashing, installation, bugs, or other things not working. While this is understandable, it is not in accordance with XDA guidelines for development sections. A dedicated Questions and Troubleshooting thread helps avoid clutter in the development thread and gives the community more opportunities to work together to resolve issues, rather than assuming the developer is responsible for all questions.
Q: How do I move my post to the Questions and Troubleshooting thread?
A: Copy the text of your post in the development thread and paste it here. Then, edit your post in the development thread to read: post moved to Q&T thread, preferably accompanied by a link to your new post.
Q: Where are the download links for this ROM?
Q: What are the known issues with this ROM?
AA: See post 1 of either development thread: [ROM][AOSP 4.2.2] CyanogenMod 10.1 Official or [ROM][AOSP 4.3] CyanogenMod 10.2 Official. There, you will also find the installation instructions and solutions to common problems.
I've had this issue since moving to CM 10.2, originally on the unofficial nightly 20130901, just flashed the unofficial 20131014 yesterday. My phone will not make sounds after previously set to vibrate, after turning up the volume with the volume key from the home screen the indicator shows volume, but will not make a sound to verify the sound level, and my alarm is silent too. Rebooting seems to fix the sound until I silence it again, but I have to yank the battery as it freezes on a reboot initiated from the power key. I have updated my recovery to TWRP 2.6.3.
I very much appreciate the screen flickering fix on the 10/14 nightly, it is completely gone today.
biodiesel.ufo said:
I've had this issue since moving to CM 10.2, originally on the unofficial nightly 20130901, just flashed the unofficial 20131014 yesterday. My phone will not make sounds after previously set to vibrate, after turning up the volume with the volume key from the home screen the indicator shows volume, but will not make a sound to verify the sound level, and my alarm is silent too. Rebooting seems to fix the sound until I silence it again, but I have to yank the battery as it freezes on a reboot initiated from the power key. I have updated my recovery to TWRP 2.6.3.
I very much appreciate the screen flickering fix on the 10/14 nightly, it is completely gone today.
Click to expand...
Click to collapse
There's a new official nightly you can flash now. 20131016. As for the sound thing, if you go into Settings--->Sound you can check off "Volume Adjustment Sound" and it should make a tone showing what the volume level is. I'm not sure if it's related or the same thing you're experiencing, but in the past I've had issues flashing between builds (not nightlies, but flashing from like 4.2.2 to 4.3) where the default ringtone, notifcation tone and/or alarm tone would get some issue and it would say "Unknown" if you went to check what they were set to. Setting them to a new tone fixed the issue. This usually occured when I would flash a very different build version, or when I would restore a TWRP backup. But once I set a new tone it would be fine from that point on.
I am running 10.2-20131016-NIGHTLY-fireball. Our office has two wireless routers that share the same SSID, but different channels to eliminate interference. Not unique to this build, it seems that my handset's wifi is either slow to, or just doesn't, hand off to the best router when I move about. It seems like in the past i could walk from one end of the office to the other, watch my wifi signal go down, then suddenly jump up as I near the closer router. Is this a CM issue, or is this an android issue, or is there no mechanism to adjust automatically? Thanks for any help.
spectre559 said:
I am running 10.2-20131016-NIGHTLY-fireball. Our office has two wireless routers that share the same SSID, but different channels to eliminate interference. Not unique to this build, it seems that my handset's wifi is either slow to, or just doesn't, hand off to the best router when I move about. It seems like in the past i could walk from one end of the office to the other, watch my wifi signal go down, then suddenly jump up as I near the closer router. Is this a CM issue, or is this an android issue, or is there no mechanism to adjust automatically? Thanks for any help.
Click to expand...
Click to collapse
I'm not qualified to answer on this issue but I'll point out that I've noticed this behavior since I've been on cm. I work in a large building with multiple access points and it doesn't hand off between routers well at all.
Sent from my Incredible 4G LTE using Tapatalk now Free
Maybe if you check off "Avoid poor connections" in the WiFi advanced settings it will hand off easier when the current signal gets weak. Also note that you can select the priority levels for the WiFi networks in those advanced settings. Maybe you're closer to one of them but the priority of the other one is set higher so its constantly trying to connect to that one first?
somerandomname1 said:
Maybe if you check off "Avoid poor connections" in the WiFi advanced settings it will hand off easier when the current signal gets weak. Also note that you can select the priority levels for the WiFi networks in those advanced settings. Maybe you're closer to one of them but the priority of the other one is set higher so its constantly trying to connect to that one first?
Click to expand...
Click to collapse
Not sure if this will help as the routers have the SSID, so there is only one wireless network entry in the wifi list.
spectre559 said:
Not sure if this will help as the routers have the SSID, so there is only one wireless network entry in the wifi list.
Click to expand...
Click to collapse
Ahh, I've never seen where two routers have the same ssid. I just assumed that since they were technically two different connections it would list the same name twice. Well maybe the "avoid poor connections" will help? I've never had that checked either so I don't know how well it works, but it makes sense that it would drop a low signal more easily for a higher one.
somerandomname1 said:
Ahh, I've never seen where two routers have the same ssid. I just assumed that since they were technically two different connections it would list the same name twice. Well maybe the "avoid poor connections" will help? I've never had that checked either so I don't know how well it works, but it makes sense that it would drop a low signal more easily for a higher one.
Click to expand...
Click to collapse
You'd think that would work better but it doesn't. It keeps that signal until it's low enough to drop it then actually drops it and you're without a signal for a second or few before it connects to the stronger signal. This is the behavior I notice with mine regardless if avoid poor connections is checked or not
Sent from my Incredible 4G LTE using Tapatalk now Free
somerandomname1 said:
Ahh, I've never seen where two routers have the same ssid. I just assumed that since they were technically two different connections it would list the same name twice. Well maybe the "avoid poor connections" will help? I've never had that checked either so I don't know how well it works, but it makes sense that it would drop a low signal more easily for a higher one.
Click to expand...
Click to collapse
Just checked...apparently I already "avoid poor connections" checked. I'm wondering if there is any built-in software function that actually checks for better signals on different channels when connected to the same SSID.
I flashed the unofficial 10/15 build with no problems at all for about 5 hours. Went to sleep and now I can't send txt or make phone calls. My phone shows that I have full service so I'm thinking its a borked radio. Well my comp with adb crapped out on me this morning, so I have a laptop with windows 7 and no ADB. Flashed back to a different ROM and no luck. Still no txts can be sent out or phone calls but I can receive them. Can someone point me in the right direction to install adb on windows 7? I used google but a lot of the articles were out of date. Thanks in advance!
TheGOAT232412 said:
I flashed the unofficial 10/15 build with no problems at all for about 5 hours. Went to sleep and now I can't send txt or make phone calls. My phone shows that I have full service so I'm thinking its a borked radio. Well my comp with adb crapped out on me this morning, so I have a laptop with windows 7 and no ADB. Flashed back to a different ROM and no luck. Still no txts can be sent out or phone calls but I can receive them. Can someone point me in the right direction to install adb on windows 7? I used google but a lot of the articles were out of date. Thanks in advance!
Click to expand...
Click to collapse
Did you do a full wipe and clean install? Or are you flashin' dirty?...
TheGOAT232412 said:
I flashed the unofficial 10/15 build with no problems at all for about 5 hours. Went to sleep and now I can't send txt or make phone calls. My phone shows that I have full service so I'm thinking its a borked radio. Well my comp with adb crapped out on me this morning, so I have a laptop with windows 7 and no ADB. Flashed back to a different ROM and no luck. Still no txts can be sent out or phone calls but I can receive them. Can someone point me in the right direction to install adb on windows 7? I used google but a lot of the articles were out of date. Thanks in advance!
Click to expand...
Click to collapse
Check that you have RUIM/SIM selected under Settings > (Wireless & Networks) More... > Mobile networks > CDMA subscription. Barring that, restore a known working backup and check the phone. If it does not work, follow the borked radio instructions - after which if you install CM again, set that RUIM/SIM connection type on first boot and restart.
mdmower said:
Check that you have RUIM/SIM selected under Settings > (Wireless & Networks) More... > Mobile networks > CDMA subscription. Barring that, restore a known working backup and check the phone. If it does not work, follow the borked radio instructions - after which if you install CM again, set that RUIM/SIM connection type on first boot and restart.
Click to expand...
Click to collapse
I am currently on a restored ROM that I was using prior to the CM ROM. I am currently still having the same issue, I can't send out calls and texts but I can receive text. In my previous post, I stated the PC that I had ADB installed on crapped out on me this morning. I have a laptop running Windows 7 without ADB installed. My PC is running Windows XP, as of to where my laptop is running Windows 7. So I was just looking for a guide to help me install ADB on Windows 7 and just go from there. Appreciate the quick responses, it's the only phone I have and as of right now its useless.
Speakerphone patch
@scottyb96: with reference to this post, try this sound file update (install through recovery) and see if it helps your garbled speakerphone mic. Several device definitions were missing the dual-mic feature of this phone.
Also, let me know of any regressions. I updated quite a bit more than just mic.
TheGOAT232412 said:
I am currently on a restored ROM that I was using prior to the CM ROM. I am currently still having the same issue, can't send out calls and txt but I can receive txt and no phone calls. In my previous post, I stated that I the PC that I had ADB installed on crapped out on me this morning. I have a laptop running Windows 7 without ADB installed. My PC is running Windows XP, as of to where my laptop is running Windows 7. So I was just looking for a guide to help me install ADB on Windows 7 and just go from there. Appreciate the quick responses, it's the only phone I have and of right now its just worthless
Click to expand...
Click to collapse
Drivers, ADB/Fastboot, Post 2
Is there any way to subvert the text message limit where it splits? Using third-party sms apps it's possible. Just wondering if there's any hidden way or something I can edit to disable the splitting in the stock sms app.
mdmower said:
@scottyb96: with reference to this post, try this sound file update (install through recovery) and see if it helps your garbled speakerphone mic. Several device definitions were missing the dual-mic feature of this phone.
Also, let me know of any regressions. I updated quite a bit more than just mic.
Click to expand...
Click to collapse
First test sounds good. I will report back after a few days of operation. Thanks for the update.
scottyb96 said:
First test sounds good. I will report back after a few days of operation. Thanks for the update.
Click to expand...
Click to collapse
I'd like to merge this by Thursday evening at the latest. If others can apply the sound file fix and make sure I didn't introduce any regressions I'd appreciate it. I'd also like to ensure garbled mic when on speakerphone is indeed fixed.
My issue is that I am constantly stepping outside, out of reach of my modem, and I'll have to turn my Wi-Fi off or my phone will stay connected to the the incredibly weak wifi signal.
So, I tried turning the dev option for "aggressive wifi to cellular handover" on thinking this would help and allow me to just leave wifi turned on while stepping outside and have it switch over to data without my assistance. And it worked, for the most part (it still held on to wifi signals *I* would deem too slow, but not often), BUT whenever I reboot the option in dev settings un-ticks so I have to go back in and turn the setting back on.
My question is, is there a way to prevent the aggressive wifi to handover from turning off on reboots, or is there another option I could try that may even be more aggressive?
Thank you in advance!
Have you tried the setting to automatically disconnect from a poor WiFi signal? It's under WiFi>settings>advanced WiFi>avoid unstable connections
Juggernaut79 said:
Have you tried the setting to automatically disconnect from a poor WiFi signal? It's under WiFi>settings>advanced WiFi>avoid unstable connections
Click to expand...
Click to collapse
That says it'll automatically disconnect from no connection, but I still have an internet connection off the wifi, it's just like slow as all get out
6NomoN6 said:
That says it'll automatically disconnect from no connection, but I still have an internet connection off the wifi, it's just like slow as all get out
Click to expand...
Click to collapse
For me it disconnects from a weak signal.
I'll be back!
6NomoN6 said:
My question is, is there a way to prevent the aggressive wifi to handover from turning off on reboots, or is there another option I could try that may even be more aggressive?
Click to expand...
Click to collapse
I have the same problem, discovered the same solution, and have run into the same issue with no persistence after reboot! I'm googling now for a solution because going into developer options every reboot is incredibly damaging to the smoothness of the user experience I've worked so hard to customize.
Whether I find a solution or not I'll post in this thread again to let you know. If the latter is the result I will personally either write a tasker script, init.d script, or if nesseceary an Xposed module depending on factors I've yet to research. Can you Beta test for me if it comes to that? Maybe it's as simple as editing build.prop, I don't know yet, but I wanted to make this post ASAP so that you know you aren't alone on this and someone capable is working on the issue. For a developer like myself tapping menus every boot is unacceptable! Hopefully there is already a fix out there in the wild and I won't have to do any work.
P.S. Don't forget to also enable cellular radio always active for fast network switching at the price of some battery life. It's a few options below aggressive handover in Developer Options and thank jolly the setting is sticky unlike it's counterpart. Also, sorry for the poor turnout on your thread. I figured there'd be 100 posts by now, but at least you got my attention.
Edit 1: "setprop persist.{i-dont-know-yet}" in terminal emulator may do the trick. Checking for variables for the setting we want now. Hopefully they exist!
Edit 2: :laugh: I FOUND EVERYTHING I NEED FOR A FIX!!! However, an Xposed module will be required. I need some sleep but I should have something by tomorrow night. In case any other developers are reading this, here is the information required to make things work the way Iwe want them to:
http://android.stackexchange.com/qu...-cellular-handover-option-in-developer-settin
https://android.googlesource.com/pl...ndroid/settings/DevelopmentSettings.java#1061
Edit 3: Now that I know how this setting actually works together with wifi_watchdog (see source code WifiWatchdogService.java) I think I may have changed my mind regarding how to go about solving the root problem at hand (network switching) which this setting really does a "hack" job of taking care of. The developer that made it decided on a arbitrary, static number to be used for decreasing the connected WiFi AP's RSSI value (thereby making handover more "aggressive") instead of exposing any kind of grainular control to the user. So yes I could easily make the developer options setting stick but a much better approach would be to hook the method android.net.wifi.WifiManager with an Xposed module and implement additional logic to the network switching. The great thing about this method is there is the possibility for adding additional checks besides just periodically pinging the current primary dns server and monitoring the delay and timeout of the result. I also know for a fact modding the framework persists after reboot which is afterall all we originally wanted to have. The second or alternative route would be to edit the secure settings database using SQLite. The pro of this method is it is guranteed to be compatible with nearly ANY rom, won't break anything after an update, and doesn't use resources like an Xposed module. The con is that you are limited to the variables built into android, can't implement any new logic, and the worst is that I'm not even sure the modified tables would even persist after a reboot (or network state change for that matter) which if true would defeat the original purpose of this expedition. I'll make a fourth edit to this post after I've thought about and considered how to best proceede to reaching the goal of having a solution to our problem. :victory:
FoxysWorkplace said:
I have the same problem, discovered the same solution, and have run into the same issue with no persistence after reboot! (...)
Click to expand...
Click to collapse
First of all, thank you so very much for looking into this!
I'm sorry for not responding sooner, but I had honestly lost hope of finding a solution to this issue mainly because I am not a developer myself and haven't the foggiest how to get started with it on Android
But when I opened my notifications and saw a response to this post (!) I got *extremely* excited, and as I read through your post, my excitement intensified to great happiness!
I can't express my gratitude, but I would be more than happy to help with anything that I can!
Any news on this?
Has anyone found a solution?
Had anyone found a solution that doesn't require root access?
Can we expect that fourth update any time soon? Any solution without xposed?
I'm following this thread in the event that someone finds a non-rooted solution. The Galaxy S7 really cannot be rooted without a serious performance hit (and yes I've gone through the two or three best/popular lag-fix solutions) but it works best in stock :-/