Hi,
So my problem is I flashed as follows: the CherryBlur-v1.2 -> CherryBlur-v1.3 update -> STOCK 4.5.2A Theme
From there I want to reboot and it stays on black screen! I plug / unplug the usb etc. .. only the green LED on top of the atrix!
Bad news?! What to do!
Thank you in advance!
EDIT : Pffffff I'm a big big ****!! During installation etc. I eat my 80% battery! and no way to be loaded via the PC USB!
So now it's all good! apologize for the inconvenience!
pacifox said:
Hi,
So my problem is I flashed as follows: the CherryBlur-v1.2 -> CherryBlur-v1.3 update -> STOCK 4.5.2A Theme
From there I want to reboot and it stays on black screen! I plug / unplug the usb etc. .. only the green LED on top of the atrix!
Bad news?! What to do!
Thank you in advance!
EDIT : Pffffff I'm a big big ****!! During installation etc. I eat my 80% battery! and no way to be loaded via the PC USB!
So now it's all good! apologize for the inconvenience!
Click to expand...
Click to collapse
sorry for bringing a dead thread back to life like Michel jackson (THRILLA !)
But i have the same problem i flashed cm7 beta and i was in recovery and all of suden my phone turned off and when i tryed to plug it back in all that happend was my phone had a blank scrren and green steady led.
what was your solution??
heyhey24 said:
sorry for bringing a dead thread back to life like Michel jackson (THRILLA !)
But i have the same problem i flashed cm7 beta and i was in recovery and all of suden my phone turned off and when i tryed to plug it back in all that happend was my phone had a blank scrren and green steady led.
what was your solution??
Click to expand...
Click to collapse
Did you try pulling the battery?
Speedily sent from CM7 Beta
I have this problem too. i'd reallllyyy appreciate an answer
Related
Hello everyone!
I have a problem with turning my phone.I had flash my phone back to 1.6 and I turned it on but it began continuous vibrate then I removed battery and tried turn on again but it vibrated again.
After that I tried flash my phone to 2.1 from this thread http://forum.xda-developers.com/showthread.php?t=683793
but when I turned it on my phone just vibrate a bit , there was green blink and the screen showed nothing but is was light
Help me pls!!!!!
ChikCool said:
Help me pls!!!!!
Click to expand...
Click to collapse
To try and resolve your issue, try THIS instead, and give the phone at least 5 minutes to boot, if it doesn't after that try again.
ChikCool said:
Hello everyone!
I have a problem with turning my phone.I had flash my phone back to 1.6 and I turned it on but it began continuous vibrate then I removed battery and tried turn on again but it vibrated again.
After that I tried flash my phone to 2.1 from this thread http://forum.xda-developers.com/showthread.php?t=683793
but when I turned it on my phone just vibrate a bit , there was green blink and the screen showed nothing but is was light
Help me pls!!!!!
Click to expand...
Click to collapse
had the same problem a few weeks ago, here's the thread with the sollution:
http://forum.xda-developers.com/showthread.php?t=884774
good luck
kistigun said:
had the same problem a few weeks ago, here's the thread with the sollution:
http://forum.xda-developers.com/showthread.php?t=884774
good luck
Click to expand...
Click to collapse
Can you tell me what I need to do with this ROM http://hotfile.com/dl/59478017/8dad8..._F3v3.rar.html ????I thought that this ROM was needed to download
So thank you very very very very much my phone return to life.And can I flash my phone to 2.1 after that???
oh so srr I did wrong again Srr
My bro and sis
i am so dead now
I try to downgrade my phone to 1.6i then SEUS to latest agn
But when i downgrade to 1.6i
i turn on my phone, it keep vibrating OMG
then i idk how so i SEUS it
lol it turn on with no SonyEricsson white screen but just black screen then keep flick
Help me bro and sis
Use flashtool.
Check the dev section.
I did tried the flash tool
but it just keep flicking black screen (not even white screen) all the time after i turn on
johnlth93 said:
I did tried the flash tool
but it just keep flicking black screen (not even white screen) all the time after i turn on
Click to expand...
Click to collapse
OH then PC Companion.
Woah, just find this out
When i plug in USB without turning on the phone
it just light up the green led just like flash mode (where i dint press the back button at all)
everything
i tried pc companion
Update services
Flash tool 0.2 something
just keep something stuffs like i said flick
Thanks i fixed myself =.=
after "fighting" for 6 or more hours 0.o
How did you fix it ?
johnlth93 said:
Thanks i fixed myself =.=
after "fighting" for 6 or more hours 0.o
Click to expand...
Click to collapse
Iam having exactly same problem! I updated my phone using SEUS and, when i started it... its just vibrating. I tried evrything like you.. with no success. My phone is just useless since 3 days. Please let me know how you fixed it.. it be a great help since i dont want to buy another phone. thanks in advance!!
I have a similar problem, use flashtool with firmware R1FA16, my phone working again
Hi
I've just updated my x10mini using SEUS and I had app2sd.
I don't know why, but it does not start. It keeps reestarting after reaching the SE Logo screen.
I can't turn it off to try something because my battery is not accecible. Can Anyone help?
NerdBigHead said:
Hi
I've just updated my x10mini using SEUS and I had app2sd.
I don't know why, but it does not start. It keeps reestarting after reaching the SE Logo screen.
I can't turn it off to try something because my battery is not accecible. Can Anyone help?
Click to expand...
Click to collapse
Try this Thread Bro.......
http://forum.xda-developers.com/showthread.php?t=981935
pratyush_gamer said:
Try this Thread Bro.......
http://forum.xda-developers.com/showthread.php?t=981935
Click to expand...
Click to collapse
Thanks for your answer. But do you know if I turn my phone off this way and then conect to SEUS to reflash it again it will bring it back to live?
Because I didn't do anything wrong when I was updating my phone, I believe it happened because I had app2sd and deleted some native apps.
Thanks
NerdBigHead said:
Thanks for your answer. But do you know if I turn my phone off this way and then conect to SEUS to reflash it again it will bring it back to live?
Because I didn't do anything wrong when I was updating my phone, I believe it happened because I had app2sd and deleted some native apps.
Thanks
Click to expand...
Click to collapse
Dude this things turn ur phone Off as well as when you use SEUS atleast u can reflash your ROM.....!!!!
Do sum steps as following to reflash Correctly-:
Don't plug the USB.....pls follow the STEPS!!!
1. Turn your phone off using this method.
2. Start SEUS on your PC.
3. Choose your phone model(x10 mini/pro),--> Next-->When it shows instructions press the back button and hold...while holding it,plug the USB to your dead phone and hold it till it shows stable green light and the process will be started.....
4. And OMG your ROM is now Reflashed....
Enjoy.....!!!!!
Thanks for your attention. My problem is now solved.
Unfortunately I didn't do as said in the first comment of the toppic, by pulling of the little rubber around the cammera, but as said in the other posts along the thread, by pressing menu button + on/off button + back button. It really worked.
Thanks fot sending me that thread anyway.
Have a nice day.
so i flash cm9 yesterday and everything went very good
cam i was warking video wifi everything was working...
so i close my phone and put it on charge now it does not
do nothing only red led is alive but for 3 flashes and one big any advise pls
its s-off with latest firmware and cm9
recovery i had 4ext but now i thing is revolutionay as i need
to download gapps from rom manager
tsalas said:
so i flash cm9 yesterday and everything went very good
cam i was warking video wifi everything was working...
so i close my phone and put it on charge now it does not
do nothing only red led is alive but for 3 flashes and one big any advise pls
its s-off with latest firmware and cm9
recovery i had 4ext but now i thing is revolutionay as i need
to download gapps from rom manager
Click to expand...
Click to collapse
can you even turn it on....get to hboot? or when you hook it up to charge you get 3 flashes....are they light or bright flashes?
i cant trun on my phone i have 3 little red flashes and then 1 big
for 2-3 sec after this nothing
tsalas said:
i cant trun on my phone i have 3 little red flashes and then 1 big
for 2-3 sec after this nothing
Click to expand...
Click to collapse
you sir have a brick on your hands....but its ok,,,, just look up the unknownforces unbricking method to start your evo 3d all over again....
thnx for any advise man i come back to from the dead
i was reading others same threads i camo accros this
Take the battery out, plug it in wait till the red light goes off, 5 seconds. Now press the camera button... Phone will turn on
and worked thnxs again have a nice day
Hi, ok so about a month ago i let the phone discharge completly i was on wolf's rom,and when i got home i put it on charge let it like 10 - 15 minutes and then try to turn it on,but all i got was a vibration and a green light flashing once,and then got a new phone arc s and today i kinda miss my x10 xD so i took the battery out and give it 2..3 minutes to rest and then try again ....nothing(i let it another 1:30 minutes to charge ), afterthat i flashed 2.1 official with flashtool clean no mod's the flashtool didnt give me any error but when i try to start ..the phone did the same thing 1 vibrate and green light once blink and now when i put it on charge the phone has the green light on like 5 minute then it turns off,if i take the battery out and put it on charge the green light apears...i tried another battery and the phone has the same problem.. so i came here if anyone know what is wrong with him (i installed SEUS > press repair > said my phone has the latest software,and pc companion the same) (sorry for my english)
Later edit : i am thinking to try unlock bootloader if that dosent give me any what so ever blinking screen or logo or error ... imma going to buy a JTAG cable and try that /// what should i do?? becouse i just want to experiment on this phone cuz i have my arc s and i am good with him xD
Later later edit : ok so i found out the problem..that was i tried to flash 1.6 in the past and that f**ked my boot some how so today i went at a service who has Jtag box ..(is kinda expensive to buy one just for my phone ..no worth it) for x10 an the man fix my phone in like 10 minutes so everyone who has one of the one of the following problmes only jtag can fix it : 1 if u flashed a stock rom and u got only a green light blink and a virbate and then nothing happens 2 if u get a green light and the phone is stuck on virbate and nothing happens..and btw if u get three blink red lights..u need to charge the phone or the battery hope it helps somebody
because i am happy now with the x10 working like new xD (dunno what is the rulles here but u can delete my topic.thx) hi hi only me post here
Since you solved your problem you should update your post from 'x10 doesn't power on' to something like 'SOLVED: X10 doesn't power on '
I also had same no power green light, had to use older flashtool and flash stock generic 2.1. It took 2-3 times for flash to take
from XDA app on my X10S v8.3 on DooMKernel6 @ 1152Mhz
ToledoJab said:
Since you solved your problem you should update your post from 'x10 doesn't power on' to something like 'SOLVED: X10 doesn't power on '
I also had same no power green light, had to use older flashtool and flash stock generic 2.1. It took 2-3 times for flash to take
from XDA app on my X10S v8.3 on DooMKernel6 @ 1152Mhz
Click to expand...
Click to collapse
am having the same problem can you plz plz plz help me thx
Maty360414 said:
am having the same problem can you plz plz plz help me thx
Click to expand...
Click to collapse
A little info is needed. Have you tried the way described in this thread? How did this happen?
Sent from my X10S using XDA