I finally got a smartphone about a week ago. I was so excited to root my phone and mess around with it. I figured it would be super easy because of so many people doing it, but I was wrong. WHERE THE F*** DO I START. Why is this sheet so god dam complicated. Everywhere I go it tells me to download this, download this, instill this but they never go into detail how or why. I finally found and easy way but it said I cant do it with Froyo. So basically what im asking for is a step by step explanation on how to root a Samsung Fascinate on Froyo.
If I'm not mistaken, the file here is a one-click root method. Run that, and after that, you just boot into recovery by holding the three buttons when it's off, choose to wipe data, choose to wipe cache, and choose to wipe Dalvik cache, then flash the zip for the ROM you want.
It's not terribly hard to understand if you read around a bit. What I linked to is a sticky. There are a lot of guides that explain it well enough. You just need to use your head a bit. Not everything is gonna hold your hand every step of the way.
What see you rooting for?...rooted apps? Custom rom/kernel? Both?
The reason I ask is if you are gonna run a custom rom, most of them give you root access just by flashing the rom and makes rooting prior too rather pointless.
If however your just looking for root access for rooted apps...ie titanium backup just use super one click...I believe it is located in the sticky the previous poster replied...if not just search around for it...there are stickies in the general and development section that should be able to get your feet off the ground
Sent from my SCH-I500 using XDA App
Question: What is EB04 ? I only know EC09, EB01, ED01,ED04, ED05 modem but I had never heard about EB04 modem
I honestly had like 20 tabs open with a whole bunch of random sites on how to root my phone. That was one of them and it didnt work. If you go to the first link it takes you to the one click root. I did this and it didnt seem to work. I read on another site that said it doesnt work if you have Froyo. I think im gonna try again tho.
This was to Askepios
BIBUBO BCJ said:
Question: What is EB04 ? I only know EC09, EB01, ED01,ED04, ED05 modem but I had never heard about EB04 modem
Click to expand...
Click to collapse
Build number SCH-i500.ED04
efan450 said:
What see you rooting for?...rooted apps? Custom rom/kernel? Both?
The reason I ask is if you are gonna run a custom rom, most of them give you root access just by flashing the rom and makes rooting prior too rather pointless.
If however your just looking for root access for rooted apps...ie titanium backup just use super one click...I believe it is located in the sticky the previous poster replied...if not just search around for it...there are stickies in the general and development section that should be able to get your feet off the ground
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I really wanted to run that voodoo rom cause I heard it makes the sound quality when playing music and capturing videos very good. I tried the one click root but i dont think it worked correctly. The super user app appeared but it doesnt say im rooted
Supraman21 said:
I really wanted to run that voodoo rom cause I heard it makes the sound quality when playing music and capturing videos very good. I tried the one click root but i dont think it worked correctly. The super user app appeared but it doesnt say im rooted
Click to expand...
Click to collapse
If the super user icon is there your rooted...an easy way to tell is just do a search on the market for rooted apps..install one...like titanium backup and see if it gets root access, but for the most part if you see the little an android with the skull and cross bones your rooted.
If you want to run a voodoo kernel so you can use the voodoo control app for better sound, I would do a little research on what rom/kernel you would like to run...obviously voodoo but which one? I would recommend going comm rom (ukb)
I can send you some links for the stuff you'll need and how to go about doing it but there are some great posts on how to do it already when I get to my pc I'll see if I can find you some good links to get you started
Sent from my SCH-I500 using XDA App
efan450 said:
If the super user icon is there your rooted...an easy way to tell is just do a search on the market for rooted apps..install one...like titanium backup and see if it gets root access, but for the most part if you see the little an android with the skull and cross bones your rooted.
If you want to run a voodoo kernel so you can use the voodoo control app for better sound, I would do a little research on what rom/kernel you would like to run...obviously voodoo but which one? I would recommend going comm rom (ukb)
I can send you some links for the stuff you'll need and how to go about doing it but there are some great posts on how to do it already when I get to my pc I'll see if I can find you some good links to get you started
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thanks I really appreciate it
Related
well theres a lot of old info out there, having a hard time sorting some of this stuff out!
I have a stock Eris that came from Verizon with 2.1 on it already. I'd like to root it, but does that mean I have to install a custom ROM? or is there a way to get root with the ROM thats already on the phone? Sorry noob questions I know but I've read over the adb command stuff and it sound easy, but I'd like some clarification on what each command does and what each file is for, etc...I have the sdk set up already on my computer. I hear stuff about bootloader versions, radio versions and stuff too, does this stuff get modified as well during this process? and if so, is there a way to revert to 100% stock if I have to send it in for warranty or insurance? keep in mind this phone already had 2.1 from verizon, if that matters.
You can root your phone using jcase's 1 click root app from the market all you have to do is run the app, reboot into recovery by holding power and volume up or down(mine ia volume up my roomates is volume down) and flash the rootme.zip file the app places on your sd card. Doing this will root your current os and you will not lose any data. At that point you can wipe and flash a custom rom instead of the rootme.zip by having one downloaded and already on your sd card. Make sure its not in a folder. If you want to do things like overclocking you will need a custom rom as the stock kernel does not support it. You can also just flash a new kernel its the same as flashing a rom. Anyway check out jcase one click root thread in the eris development section for more detailed instructions and on youtube lostelement has some great videos showing how to root the eris and flash a rom step by step. Hope this helps.
Sent from my FroyoEris using XDA App
can you still root this eris using the command terminal? or do I have to do the 1-click method? and as far as returning the phone to 100% stock, is there a RUU program that will restore everything to stock? I've seen some threads but it seems like many of the download links are getting broken for some reason?
EDIT: also, jcase's 1-click method installs Amon's recovery correct? and this file..."rootme.zip" is this like a "patch" that is applied to the current OS to provide root, whereas flashing a new custom rom will delete and replace everything but this custom rom has been writtn to provide root access already? sorry so many questions, just trying to get a handle on this before I try it and do something stupid/expensive haha
Yes there are ruu's to go back to stock. I believe you can still use the terminal but one click root is easier and it does give you amon ra recovery. Flashing rootme.zip will root your stock os and give you superuser permissions app which allows you to manage what apps are granted root access.
Sent from my FroyoEris using XDA App
And customs roms are all ready to for root. If your flashing a custom rom you don't need to flash rootme.zip.
Sent from my FroyoEris using XDA App
Does flashing custom roms change the hboot version or the radio version? Also for some reason when I do the vol-up+end when I power on it shows a screen with a red triangle with an exclamation point, is this normal until I flash the new recovery image?
Yea that's normal until you flash a new recovery and the roms don't affect the radio or hboot. They must be flashed separately. Be very careful flashing a radio. A bad radio flash is the easiest way to brick your phone.
Sent from my FroyoEris using XDA App
probably wont touch the radio or hboot, not many ppl seem to need to. as far as the RUU goes, it will re-flash the recovery and the rom back to the same as they were out-of-box correct? wondering if anybody has a link to this file, all links i've found are broken
I haven't had to use it but from what I understand its an executable file that you run on your pc while your phone is plugged in via usb. If you need it im sure someone would be able to post a fresh link or email it to you.
Sent from my FroyoEris using XDA App
thx steve for all your help so far If anybody has a link to the RUU for the official original 2.1 eris, email it to me or link in this thread, also wondering if theres a link to the official 2.1 ROM (the non-root version and not the leak versions, the "official" OTA is what I mean.) In case something bad happens with a ROM I install that i have the original to flash, thay way I can keep Amon's recovery on the phone instead of using the RUU, personally having a hard time finding it. seems liek all the stock roms are labeled PB00IMG?
After you root, in amonra you can do a nandroid backup, which will completely back up everything on your phone to your sd card. If you don't like a rom or are having problems you can just recover your backup and your phone will be as it was when you made the backup. I keep nandroids of a few different roms and just switch between them sometimes.
Sent from my FroyoEris using XDA App
So is there any advantage at all to being rooted on the stock rom? That's where I am now. I will probably stay there for a while until I decide what ROM I want to try. I installed an overclocking widget from the marketplace just to try it out, but from the sounds of this thread, its a waste of time with the stock rom.
Rooted on a stock Rom sucks. Battery life compared to a froyo based Rom is exponentially better imo. Nonsensikal vanilla v7 was the Rom of choice but I'm back to stock because I have to send the phone back to VZW
Sent from my Eris using XDA App
Yea I would recommend kaos froyo or tazz froyo. Im currently using kaos 35-1 and the battery life is amazing. Check out DS36 thread on improving battery life by using set cpu and auto killer. I get a day and a half easily with moderate use IE texting facebook and checking xda all the time and a phone call or two. I have the stock battery.
Sent from my FroyoEris using XDA App
Steve125 said:
Yea I would recommend kaos froyo or tazz froyo. Im currently using kaos 35-1 and the battery life is amazing. Check out DS36 thread on improving battery life by using set cpu and auto killer. I get a day and a half easily with moderate use IE texting facebook and checking xda all the time and a phone call or two. I have the stock battery.
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
Sounds good. I think I am being a bit of a chicken to be honest. Sell me on the safeness of this. I will look at that thread too. Thanks.
tmason68 said:
Sounds good. I think I am being a bit of a chicken to be honest. Sell me on the safeness of this. I will look at that thread too. Thanks.
Click to expand...
Click to collapse
It's really not that difficult one click Eris root run rootme.zip download and extract the Rom of your choice. Run amon ras recovery nandroid backup wipe flash new Rom and voila. Easy as pie.
Sent from my Eris using XDA App
I did the one click Eris root already, and just applied the rootme.zip. So installing a new rom would mean copying it to the root of the SD card, rebooting and holding down the volume key and then picking that new zip file, correct? I don't know what that amon ras recovery thingy is. Is that part of rom installation, or something that I need to acquire separately?
You need to copy the Rom to your SD card and use estrongs file explorer download from market and long press on the .zip file it will pull up a menu that gives you some options. Extract from the .zip file and hit ok no new path is needed. Now that yuu have the file on your SD card reboot and go to recovery nandroid backup then wipe then flash from zip. After it unpacked and loads then it will prompt you to reboot hit okay and let it do its thing. I'm going to end all this with saying double check the forums for how tos and I'm not responsible for a bricked phone do this at your own risk but have fun itsreally not that difficult
Sent from my Eris using XDA App
Abowersq said:
I'm not responsible for a bricked phone
Click to expand...
Click to collapse
Yep, I realize that. You know that you don't actually have to answer my questions right? If I ask more noob questions, know that I am not expecting you personally to answer them.
I'm at work and all of my equipment I maintain is working so I'm killing sometime
Sent from my Eris using XDA App
Whats goin on! New here as you can see... Just wanted to know if someone can drop some knowledge on me about the vibrant as far as flashing to a new rom and what I would need to do. Or you could just direct me to a guide. Been reading the forums and been hearing about Odin (no idea what it is or how I would access it on my vibrant) and I tried to boot into download and recovery mode for testing purposes and failed miserably . Anyone care to drop some knowledge.
Sent from my SGH-T959 using XDA App
First thing first.. congralutations on the Vibrant.. now lets get craking.. What do you want to do? Ther are so many update/upgrade so can do but you will need to let us know what you want so we can direct you to the correct threads..
Well, here's my recommendations:
Whoops, forgot this part, see if you can get into recovery through hardware buttons.
Turn off phone, hold down both volume buttons, then press power button until phone turns on. Keep holding volume buttons until you see the green text (I guess you could also let go when it says Vibrant on the screen). Either rejoice that your handset doesn't have it locked, or be slightly disappointed, but now you know.
1. Root (You can download an app to root you automatically, or root through a pc/mac app, or manually if you'd like.
2. Install rom manager from the market and have it install the clockwork recovery.
3. Create backup!
Now you're pretty much ready to do anything, check out some roms, unlock your phone to work with other carriers, install some lag fixes if you want.
Well looking foward to froyo and knowing samsungs rep on promises I think I might just want to use a custom froyo rom
Sent from my SGH-T959 using XDA App
Update: just installed clockwork. Did a backup and also applied lag fix. Now my question is will this effect my ota updates... And if I do flash a rom by a dev do I need to uninstall lagfix first ?
Sent from my SGH-T959 using XDA App
Depends on the rom, just read the first post, should have all the information.
Ok. Thanks for the info . This also shouldnt effect any OTA update I would get from tmobile right? All ive done is rooy, install clockwork, did a backup with clockwork, and lagfixed. Wouldnt think it should seeing as im not running a custom rom.. Correct me if im wrong.. Lol
Sent from my SGH-T959 using XDA App
luis86dr said:
Ok. Thanks for the info . This also shouldnt effect any OTA update I would get from tmobile right? All ive done is rooy, install clockwork, did a backup with clockwork, and lagfixed. Wouldnt think it should seeing as im not running a custom rom.. Correct me if im wrong.. Lol
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
You should be fine for OTA , since you are not using a custom ROM, not sure how the lagfix will affect the OTA install though(I am sure if anyway it will be negative), might be best to remove that before you install any OTA upgrades ....
So for a while now ive been debating if i should flash my phone with a new rom (or kernel) or if i should just keep it safe and just keep it rooted with nothing else.
Now the biggest thing thats keeping from flashing it is that i really dont know how hard it would be to get it back to stock. Ive been doing my hmwk and been reading through the forums but still im a little lost.
So any help / advice would be welcomed.
Sent from my SGH-T959 using XDA App
d1zturbe3d said:
So for a while now ive been debating if i should flash my phone with a new rom (or kernel) or if i should just keep it safe and just keep it rooted with nothing else.
Now the biggest thing thats keeping from flashing it is that i really dont know how hard it would be to get it back to stock. Ive been doing my hmwk and been reading through the forums but still im a little lost.
So any help / advice would be welcomed.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
well i dont own a vibrant, but from what ive read ODIN is used to get back to stock or if u soft brick ur phone. go to the rom bible for vibrants and you can find easy instruction on how to use ODIN. and there are numerous videos on youtube showing how to use ODIN.
Good luck man
d1zturbe3d said:
So for a while now ive been debating if i should flash my phone with a new rom (or kernel) or if i should just keep it safe and just keep it rooted with nothing else.
Now the biggest thing thats keeping from flashing it is that i really dont know how hard it would be to get it back to stock. Ive been doing my hmwk and been reading through the forums but still im a little lost.
So any help / advice would be welcomed.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
If you have read how to return to stock from a soft brick and are still lost, then I'd say definitely no!
Download Fusion if you do not want TouchWiz, or Bionix if you do. Stick with the stock kernel (for now).
Make sure you have Rom Manager and clockwork recovery working.
install titanium backup and backup all apps + data (I would not bother with system data).
Do a nandroid backup.
Flash your Fusion/Bionix.
If you ever want to go back, just restore your nandroid backup.
( All of these steps are in my signature in much greater detail if needed )
+1 to what s15274n posted.
The first time is always the most nerve-wracking. You've got a great phone, everything works great, & it wasn't cheap. The last thing you want to do is "do something" that might mess it up right? I was in that boat for a while and when I did flash a ROM, I was like..."I was worried why?"
It's pretty simple, I just made sure to sync my contacts/calendar, used AppBrain to sync my apps (you can use Titanium Backup to to this too but I didn't need/want to save any data) and then I was good to go.
I downloaded TGA's One Click Root/Unroot. Then after I made sure SuperUser was installed in the App Drawer I downloaded ROM Manager (Free from the Market), installed it, & ran it.
After that I clicked on ClockWork Recovery inside the app so it would download/install (it's a separate download but dependent upon ROM Manager). After that, I rebooted into recovery from within the ROM Manager. Followed the directions on the menu to perform a nandroid backup then I was good to go.
The directions for installing ROMs are in the beginning of all the ROMs threads plus there's a lot of good information in the Tip & Tricks sticky thread in General and the Team Whiskey site (Home of the Bionix ROMs) has a good writeup.
I tend to stick with the non-Froyo ROMs just because I use the GPS daily and we don't have the GPS drivers for Froyo yet. Eugene's Hybrid & Bionix Fusion are great ROMs to start with. Just pick one with the attributes you like and you won't go wrong.
Hope this helps a bit & have fun flashing,
~SB
Thank you all for your advice and help. I already downloaded Rom Manager and titanium back up all i have to do now is pick a rom and go for it...and i think i will actually pick one and do it later today.
Sent from my SGH-T959 using XDA App
Flash away my friend. I must warn you that flashing is addictive!!
Always do a Nandroid backup before Flashing. If you screw up, you can always ODIN back to Stock. ODIN is your friend!!
When flashing, I prefer to flash through Clockwork Mod. You can flash through ODIN too but Clockwork is easier.
I would also suggest making sure you can get into Download mode without adb or terminal commands as well.
If you can't then you'll want to check the bible on the method to fix the hardware lock.
Also, if you haven't yet upgraded your phone to JI6, you should SIM unlock your phone (I believe you lose this option when you go to JI6) and backup the folder that has your unlock (should also be in the bible). You may never need it, but it's definitely a nice option to have, especially on a phone that can get the AT&T 3g signal (well, one radio band of it anyways).
Hey guys so I flashed my phone earlier today using the bionix stock rom. Everything went great but then I tried going back to stock using nandroid and my phone ended being stuck at the Vibrant logo screen. After realizing that it was stuck I just went back to the bionix rom. Anyone know why nandroid wasn't able to restore me back to my back up?
Also if I wanted to install another rom would I just download it and install it or would I would have to go back to stock then flash it??
Sent from my SGH-T959 using XDA App
Sounds like you had the jac or kk kernel, and not the stock.
Nandroid doesn't restore the kernel, so you have to flash the stock kernel before.
Does the stock bionix come with a different kernel? Because I thought my kernel didn't change. I checked before and after flashing and my kernel was the same?
Sent from my SGH-T959 using XDA App
Nope...stock Bionix is the regular JI6 kernel.
Sent from my SGH-T959 using XDA App
even if you have the stock kernel of a custom Rom. when you do a nandroid restore your phone will be soft bricked. they say that after you restore, you have to flash the stock kernel too in the recovery mode.
Sent from my SGH-T959 using XDA App
Aright I guess I need to download the j16 kernel
Sent from my SGH-T959 using XDA App
Can anyone loan me a hand? I just got my new Samsung Fascinate today and I really like it. Can anyone here help me root it? It's on
version 2.2.1.
Build Number: SCH-I500.ED04
Kernel V: 22.6.32.9
Model: SCH-I500
Hardware V:I500.04
If you can, please help me out. I'm familiar with jailbreaking iPhones and iPods but have never dealed with an Android.
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
What he said... But if you want other roms, don't bother with unrooting.
Just update your recovery to the latest CWM and flash a new rom using CWM.
But I would make sure to read up before taking any steps further to make sure you know what steps to take.
Sorry, but I don't even know what a rom is. I'm familair with iPhone Jaibteaking and thats it. This is my first Android phone. All I Wanna do is be able to install the themes and tweaks and get free tethering. I'm sorry i don't know much.
Sent from my SCH-I500 using XDA App
I had root on my Fascinate and then I updated OTA to Froyo 2.2.1 and lost root.
How do I root my Fascinate now?
FW=2.2.1
Kernel=2.6.32.9
Build=SCH-I500.ED04
Baseband=S:i500.04V.ED04
Thanks to you and all the help on XDA.
Same that was already posted above.... READ
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
When I tried to download the "update.zip" file I get a 404 error.
Thanks
RacerXFD said:
What he said... But if you want other roms, don't bother with unrooting.
Just update your recovery to the latest CWM and flash a new rom using CWM.
But I would make sure to read up before taking any steps further to make sure you know what steps to take.
Click to expand...
Click to collapse
I would go this route, load up ComRom 2.1 and get rid of the ED04 radio it has some issues. It's not as hard as it sounds to do this. Just read up and enjoy a better running phone.
nunyazz said:
Same that was already posted above.... READ
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
Click to expand...
Click to collapse
I went to the page you suggested and when I tried to download the "update.zip" I get a 404 error.
What is next?
Thanks
sfobrien said:
I would go this route, load up ComRom 2.1 and get rid of the ED04 radio it has some issues. It's not as hard as it sounds to do this. Just read up and enjoy a better running phone.
Click to expand...
Click to collapse
If this is the route you want to take (I highly recommend it as well), I would check out this thread or even this thread (although it is on Android Central, so you will need to make an account to see all the links if you don't already have one). They are pretty similar (the latter is a bit overboard on detail, but that can be a good thing if you are new to the process) and should at least get you started on learning what it is you need to learn to ultimately wind up at ComRom 2.1. I hope this helps!
Hello. I finally found out what a ROM was and how to use ODIN. I had my Uncle to ROOT my Fascinate when he was down this weekend. Last night, my phone got bricked or stuck in blue recovery and I had to flash it. Or restore it using ODIN. Anyhow, can you tell me the steps to get it rooted again with Odin & Evil Fascination? ClackWorkRecovery caused thus because I couldn't get it to work to install Com rom.
Sent from my SCH-I500 using XDA App
For a better understanding, I want to do the following:
Steps to Rooting my SCH-I500 with Evil Fascinate
Getting clockworkmod working correctly
& Installing Com rom.
Sent from my SCH-I500 using XDA App
GagesiPad said:
For a better understanding, I want to do the following:
Steps to Rooting my SCH-I500 with Evil Fascinate
Getting clockworkmod working correctly
& Installing Com rom.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Evil Fascination and Community Rom are two different roms and both will root your phone when flashed... this is how mine's set up for ComRom and it works flawlessly:
1) download odin, samsung mobile phone drivers, debloated/debinged/deodexed EB01 all in one package, CWR3-Voodoo, and ComRom 2.0 package of your choice and the 2.1 patch... place ComRom and its patch onto your sd card
2) use odin to install EB01
3) boot up phone once to let it format itself
4) power off phone and use odin to then install CWR3-Voodoo
5) boot straight into CWR, wipe data/cache/dalvik 3 times each and assuming you don't want to backup/restore data (I usually just use Titanium Backup app from the market) proceed to install .zip of ComRom 2.0
6) select reboot phone and let it boot up, it may take a while the first time
7) congrats, you're rooted and running ComRom 2.0
8) to install the patch simply hold the power button down until the menu pops up, select recovery
9) this will boot you into CWR again, no data/cache wipe necessary simply install .zip ComRom 2.1 patch then reboot phone again
10) congrats now you're rooted, voodoo'd, and running the latest ComRom
hope this helps, that's about as simple and short as I can make it
tapatalked from my KangBanged Fascinate
Ok. Thanks for letting me know that. I had no idea there was a difference. I'm new to this stuff so. Yah. Anyways, I used that guys post to root my phone (the first reply with the link) and it worked for me. Can you give the the download links to all of the stuff up there that you mentioned? Or is there another thread that you go that from with a better understanding? With the links and all? I'm not sure what Voodoo is. I just want the Com Ron up and going. ;-) thanks =D
Sent from my SCH-I500 using XDA App
GagesiPad said:
Ok. Thanks for letting me know that. I had no idea there was a difference. I'm new to this stuff so. Yah. Anyways, I used that guys post to root my phone (the first reply with the link) and it worked for me. Can you give the the download links to all of the stuff up there that you mentioned? Or is there another thread that you go that from with a better understanding? With the links and all? I'm not sure what Voodoo is. I just want the Com Ron up and going. ;-) thanks =D
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
this should give you a current recovery (CWM), I use the first one:
http://forum.xda-developers.com/showthread.php?t=1046905
most everything else can be found in landsharks thread here: odin, the samsung drivers, debloated/deodexed EB01 and ED01, and how to install all of that (props to landshark68 for putting it all together)
http://forum.xda-developers.com/showthread.php?t=1048380
ComRom can be found here along with instructions on how to flash, changelogs to see whats been updated, known bugs... I would suggest reading the first few posts by nitsuj17 just to get familiar with it:
http://forum.xda-developers.com/showthread.php?t=1108991
superchunkwii put up a pretty nice detailed thread on how to get to ComRom if you're at stock (or need to go to stock, then go to ComRom):
http://forum.xda-developers.com/showthread.php?t=1053567
last but not least voodoo, these are the closest threads I could find that describe it (second one is a little better):
http://forum.xda-developers.com/showthread.php?t=1043673&highlight=voodoo
http://forum.xda-developers.com/showthread.php?t=1039897&highlight=voodoo
i know it might seem like information overload and a lot of reading, thats why i tried to simplify it in my instructions in my previous posts... if you download what you need from those threads then follow the steps I listed you shouldn't have any problems. If you do, don't worry we're here to help
Ok. From my understanding, CWR3-Voodoo is like the one click lag fix right? I'm actually using that on my phone now. When I'm on my computer later, ill go through all that and learn more about it and download everything and try it. =]
Sent from my SCH-I500 using XDA App
GagesiPad said:
Ok. From my understanding, CWR3-Voodoo is like the one click lag fix right? I'm actually using that on my phone now. When I'm on my computer later, ill go through all that and learn more about it and download everything and try it. =]
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes it has an option for enabling/disabling lagfix but its optional.. even if you decide to flash a rom with no voodoo kernel you can still use that CWM with no worries
tapatalked from my GINGERBANGED Fascinate
Thanks. Since I'm allready rooted, can I skip to steps 20-24 and do that?
GagesiPad said:
Thanks. Since I'm allready rooted, can I skip to steps 20-24 and do that?
Click to expand...
Click to collapse
yeah if you're rooted and running the baseband you want (ED01 or whatever) the boot into CWR and flash the rom you want... you're going to need to do a data/cache/dalvik wipe before flashing the initial ComRom 2.0 package so make any backups you want.. once its done installing reboot phone to make sure everything works right, then boot back into recovery and flash the patch (no wiping or anything needed) any questions or problems be sure to post them
tapatalked from my GINGERBANGED Fascinate
Thanks! I back up my stuff though Titanium back up. One thing though, how do I tell if I have CWR installed? Thanks for your help!
Just like the title says why should we not use rom-manager on this phone?
from what i can remember it installs a ****ty version of CWM that doesn't cooperate well with our phones.
Boobie Watcher said:
from what i can remember it installs a ****ty version of CWM that doesn't cooperate well with our phones.
Click to expand...
Click to collapse
gotcha. i wish koush would do something about rom manager because the atrix also had a wipping issues on roms and he never fixed it
From my recent experience with the SGSII, the recovery is integrated into the kernel (unlike HTC devices which have a dedicated partition for it). My guess is ROM Manager can't flash it, since it doesn't have the kernel image.
Phoenix84118 said:
From my recent experience with the SGSII, the recovery is integrated into the kernel (unlike HTC devices which have a dedicated partition for it). My guess is ROM Manager can't flash it, since it doesn't have the kernel image.
Click to expand...
Click to collapse
gotcha thats intresting
You shouldn't use it on any phone anyway, your best bet is going into recovery
Sent from my Inspire 4G using XDA App
Haha too funny I was literally wondering this last night. Glad you asked kuz I couldn't find an answer when I did a quick search.
Edit: so I've been running miui this week and see the app rom manager. I'm fine as long as i don't actually do anything through it correct?
Sent from my SGH-I777 using Tapatalk
It breaks and does weird crap - I've heard it works OK if (and only if) you are currently on CM7.
But since you're most likely using it to move to/from another ROM... Just three-finger into recovery or if the ROM has an extended power menu use that for recovery.
Its best to just use three-finger or the extend menu power menu like Entropy said. I've seen Rom manager mess up leading to a semi-brick phone.
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
My brothers EVO was royally effed up from using ROM Manager. Became a paperweight until Sprint authorized a replacement.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
Read through the FAQs and this thread - CWM is included in kernels that support it.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
I ended up figuring most of this out so I wanted to close this out (for anyone that stumbles past my original post).
Here's what I did:
I uninstalled ROM Manager - but this didn't get the wifi going.
I reflashed with the stock ROM and unrooted kernel - this still didn't help.
I did a factory reset - this did manage to get it going.
I was able to track down a CWM standalone that I flashed it with (using Odin).
I followed that up with a root, a wipe, and then a fresh flash of UnNamed.
Phone seems to be working fine.
Andrew149 said:
Just like the title says why should we not use rom-manager on this phone?
Click to expand...
Click to collapse
When I first rooted my phone I installed rom manager because it looked easier to just pick the file that u wanted flashed and it would do it for u, so u wouldn't have to play with the volume keys. But every time I tried to do anything with it, it just said certificate not found. Aborting. So u shouldn't use rom manager. I think it works with the roms that u download of the app but not ones from XDA.
Sent from my SGH-I777 using XDA App
I loaded a kernal with cwm. I use rom manager to install Google apps. After new rom loads up.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Flash entropys kernel. Daily driver
Sent from my Samsung Galaxy S II
If you're on CM7, ROM Manager can be used to install gapps - that's about the only thing it doesn't seem to choke on.
karankshah said:
Hey all,
First time poster and new to rooting.
I ended up attempting to use rom manager to load CWM right after root, but I think that borked my wifi.
What can I do if I've already used it? I did it because I hadn't yet seen all the xda threads on NOT using it, and the place I was was not as well informed as you folks.
Also, how do I get CWM if not via ROM Manager?
Click to expand...
Click to collapse
You cannot get CWM via ROM Manager - that is the point. It comes with certain custom kernels such as Entropy's DD kernel. If you do not have a CWM kernel - you will more than likly need to use Odin to get a kernel with CWM.
If you have totally screwed things up - look in the dev thread for "the return to stock" section and start over doing it the right way
karankshah said:
I ended up figuring most of this out so I wanted to close this out (for anyone that stumbles past my original post).
Here's what I did:
I uninstalled ROM Manager - but this didn't get the wifi going.
I reflashed with the stock ROM and unrooted kernel - this still didn't help.
I did a factory reset - this did manage to get it going.
I was able to track down a CWM standalone that I flashed it with (using Odin).
I followed that up with a root, a wipe, and then a fresh flash of UnNamed.
Phone seems to be working fine.
Click to expand...
Click to collapse
Hi first post as well XDA forums so in depth and helpful decided I wanted to be apart of it. Still a noob though ill work my way up.
I am trying acheive the same goal he is, that is to say Instal the UnNamed (it is exactly what I want) Rom on my Samsung Galaxy S2 Skyrocket.
Keep it brief: Rooted my phone using root exploit:
it will not let me post link. the zergrush one
and bellow flashed clockwork mode using stand alone not ROM because of this forum. Model 5.0.2.6
I wipe catch, battery, then format everything. Then I start to flash the ROM. The installation begins. It cleans and formats everything again, then sais that there was an error in the file and it fails. After this if I dont restore my phone will not start. Ive tried it several times being even more thorough on procedure and its the exact same error every time.
Im just wondering if its the way I rooted it is incorrect, The CWM Im using is not the correct one, or if Im doing something wrong entirely. I think it might be CWM but I have not been able to locate one like he did that worked.
Any help, suggestions, criticism or advice would be very helpful. I just thought Id ask. thanks in advance ^^
Elemblue said:
Hi first post as well XDA forums so in depth and helpful decided I wanted to be apart of it. Still a noob though ill work my way up.
I am trying acheive the same goal he is, that is to say Instal the UnNamed (it is exactly what I want) Rom on my Samsung Galaxy S2 Skyrocket.
Keep it brief: Rooted my phone using root exploit:
it will not let me post link. the zergrush one
and bellow flashed clockwork mode using stand alone not ROM because of this forum. Model 5.0.2.6
I wipe catch, battery, then format everything. Then I start to flash the ROM. The installation begins. It cleans and formats everything again, then sais that there was an error in the file and it fails. After this if I dont restore my phone will not start. Ive tried it several times being even more thorough on procedure and its the exact same error every time.
Im just wondering if its the way I rooted it is incorrect, The CWM Im using is not the correct one, or if Im doing something wrong entirely. I think it might be CWM but I have not been able to locate one like he did that worked.
Any help, suggestions, criticism or advice would be very helpful. I just thought Id ask. thanks in advance ^^
Click to expand...
Click to collapse
UnNamed is not a Skyrocket ROM nor are any other ROMs in this subforum. You want to go here: http://forum.xda-developers.com/forumdisplay.php?f=1399