Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium
Related
Having recently installed a miui rom, i found that my phone has become brocked. I can go to dwonload mode, and I can turn it on but there is only a blank screen. Does anyone know how to unbrick it?
Thanks
go into download mode open up ODIN and flash a stock ROM. Simple as that.
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
nikkox988 said:
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
He said he can access Download mode which means he can flash a stock ROM and all will be good.
I can't seem to go into recovery mode
thealmightysaj said:
I can't seem to go into recovery mode
Click to expand...
Click to collapse
to get recovery get into download mode open Odin and flash CF-Root Kernel and then try to get into download mode that way.
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
thealmightysaj said:
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
Click to expand...
Click to collapse
are you flashing it through PDA? Just checking I didnt on accident once. Also try just flashing a stock ROM.
http://forum.xda-developers.com/showthread.php?t=1224423
onli flashing pda wont work i thinkk... you may need to repartition
go to http://androidflip.com/android-2-3-4-gingerbread-xxkg3-firmware-update-for-samsung-galaxy-s2/
flash it by repartitioning
download the package in it. it worked for me
Where can I find the stock ROM for a Bell Samsung GS2?
try samfirmware.com
they have all of the official released firmwares based on geographical region.
or
http://forum.xda-developers.com/showthread.php?t=1075278
I have unbricked my phone but i can't access the android market, everytime time i open up the app it closes
my t-mobile galaxy s2 is dead after ICS upgrade failed
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
If you can't get into download mode (home/power/volume down), only thing you can try before you send it back to Samsung or get it JTAG repaired is a jig, which unfortunately is unlikely to work. Still worth a try tho.
hbarri said:
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
Click to expand...
Click to collapse
Try uploading a stock kernel first, then try uploading the rom
Do we have to have a jig?
Help me fix my fully bricked i9100
I have flashed the wrong Roms and firmwares in my Samsung galaxy s2 i9100 for several times now my phone doesnt go to the recovery mode. It only goes to the download mode but re flashing the correct new roms and firmwares, nothing actually works! I tried those
Odin shows only FAIL !! when I flash new roms..I ve tried so many roms so far but it only fails
what do I do now??
Try http://sammobile.com for the firmware.
Sent from my GT-I9100 using Tapatalk 2
Samsung Galaxy S2 SPH-D710
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
XraidedX2 said:
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your sock rom again using samfirmware.com
6.Done
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
dorian_nadaud said:
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
Click to expand...
Click to collapse
Flash this Stock recovery via odin : http://d-h.st/hcA
Instruction:
1) Put phone in download mode by powering off ,home button and volume down while plugging the phone into the computer(if don't and don't understand search google their are many guides and videos for it)
2) You should now see the first square in Odin turn yellow and say "Ready"
3) Click on the pda tab in Odin and select the Stock_Recovery_GT-I8552.tar you downloaded
4) Click start and wait for your phone to reboot
5) Done!
Well, I should have added that to the list of things that I have tried before. The only divergence to your methode is the fact that the keys to force start the downloading mode does not work so I only can acces it thrue a restart in downloading mode within CWM...
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
my GT-i8552 stuck in cwm boot looping
dorian_nadaud said:
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
Click to expand...
Click to collapse
I also have the same problem. I have read all threads from google about this matter, that say flash rom, clear whatever2, blaz bla
BUT, still for 3 days I cant fix it. when it stuck in boot looping or turn off, odin didnt recognise my phone
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Also: if Odin don't recognize your phone, try to change your usb cable
Changing PCs worked for me a while back.
not working
devesh9 said:
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
hi, i have install kies and odin. but with problem of cwm boot, pc/ odin/kies cant recognize my i8552 since it need to be turn on in normal mode. i have tried with another cable and port, as well as from pc to laptop, but still not recognize. pls help me
Does Odin recognize your phone when in download mode?
freitaz said:
Does Odin recognize your phone when in download mode?
Click to expand...
Click to collapse
not either. because my phone need to be turned on in normal mode when connect to my pc, then i need to choose the usb option whether to transfer files/camera/charging.
and only then Odin say "ready"
Do this: put your device in download mode and then you reflash firmware with Odin.
You can do this by turning your phone on pressing the buttons HOME, POWER and VOL DOWN. When your phone vibrates, release POWER and keep pressing ther other two. A screen with a warning will appear, and you press VOL UP to confirm. After that, you open Odin, plug your phone on computer and select the stock firmware by clicking on button "PDA" at Odin. And then it is just start and wait.
Same Problem
my samsung grand quattro get stuck at cwm too.. it keep booting to recovery mode when phone start up, I cant connect to Odin because I cant access to debugging setting.. HELP PLEASE :crying:
Hello
My situation goes as follows: I'm on a Cyanogenmod 11 nightly, as I flash a new ROM from time to time. So I know how to get into recovery and that kind of things. I've installed TWRP recovery, instead of the CWM one. I'm on a mac by the way.
As I was a little bit fast, I accidentally rebooted into download mode instead of recovery. Now my phone remains that way, only without the info in the top left (normally it says ODIN Mode and four other lines of information).
I tried to get the battery out and to drain the battery, both gave the same result: it booted in "downloading... do not turn off target !!"
I tried ODIN, Kies, Heimdall and adb trough terminal, and even the CM installer; none of these things seemed to recognize my phone.
I've been googling for over two hours now and I'm getting desperate. Is my phone ready for the bricks? I can't go to a shop tomorrow as it is the national holiday in Belgium. So still 32 hours of trying ahead of me...
Any ideas? If you guys have any additional questions, please ask.
Thanks in advance
R.
erdeebee said:
Hello
My situation goes as follows: I'm on a Cyanogenmod 11 nightly, as I flash a new ROM from time to time. So I know how to get into recovery and that kind of things. I've installed TWRP recovery, instead of the CWM one. I'm on a mac by the way.
As I was a little bit fast, I accidentally rebooted into download mode instead of recovery. Now my phone remains that way, only without the info in the top left (normally it says ODIN Mode and four other lines of information).
I tried to get the battery out and to drain the battery, both gave the same result: it booted in "downloading... do not turn off target !!"
I tried ODIN, Kies, Heimdall and adb trough terminal, and even the CM installer; none of these things seemed to recognize my phone.
I've been googling for over two hours now and I'm getting desperate. Is my phone ready for the bricks? I can't go to a shop tomorrow as it is the national holiday in Belgium. So still 32 hours of trying ahead of me...
Any ideas? If you guys have any additional questions, please ask.
Thanks in advance
R.
Click to expand...
Click to collapse
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
cooljay5 said:
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
Click to expand...
Click to collapse
Removing simcard and external storage didn't work, as well as putting another card in my phone. I'll try the hard reset and come back to you.
Thanks!
cooljay5 said:
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
Click to expand...
Click to collapse
Odin does nothing, I tried Kies methode, but it stopped after the download.
erdeebee said:
Odin does nothing
Click to expand...
Click to collapse
Have you tried the hard rester method?
Whilst in download mode hold power button for about 1 minute until it vibrates? Maybe your buttons are stuck.
Sent from S3 Mini
Using XDA App
LiamAtkins90 said:
Have you tried the hard rester method?
Whilst in download mode hold power button for about 1 minute until it vibrates? Maybe your buttons are stuck.
Sent from S3 Mini
Using XDA App
Click to expand...
Click to collapse
Hard reset as in tried to flash trough Kies, I can't do anything else, right?
I tried the pwoer button, but it just loops in download mode, without the information on the top left.
I do get it into download mode WITH the information, but than Kies simply says there's no phone attached.
erdeebee said:
Hard reset as in tried to flash trough Kies, I can't do anything else, right?
Click to expand...
Click to collapse
Are you familiar with the PC flashing tool Odin? It's specifically for Samsung devices.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Download and install Odin onto your PC it will flash a stock image onto your device (No root, Stock recovery)
http://www.sammobile.com
Head to Sammobile and download your ROM firmware specific to your device.
Run ODIN on your computer and connect your phone.
When it recognizes it, check "Auto Reboot" and "F.Reset Time".
Everything else should be left unchecked.
On your computer, unzip the ROM file you downloaded. It should give you something with the extension of
.tar.md5
Press "PDA" on ODIN and select this file.
Everything should be as shown here: http://gyazo.com/fea7a1c8b7a7b5bb287fb0a0c70056dc
Click Start and wait for it to do it's thing. It'll take quite a few minutes.
When it's finished, you're done.
If it hangs on boot ones it flashed, reboot to Stock Recovery and do a factory reset it should boot up fine now, (also 1st boot takes about 3 minutes.)
Let me know how it goes
EDIT: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Stock Firmware is on this page
Sent from S3 Mini
Using XDA App
LiamAtkins90 said:
Are you familiar with the PC flashing tool Odin? It's specifically for Samsung devices.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Download and install Odin onto your PC it will flash a stock image onto your device (No root, Stock recovery)
http://www.sammobile.com
Head to Sammobile and download your ROM firmware specific to your device.
Run ODIN on your computer and connect your phone.
When it recognizes it, check "Auto Reboot" and "F.Reset Time".
Everything else should be left unchecked.
On your computer, unzip the ROM file you downloaded. It should give you something with the extension of
.tar.md5
Press "PDA" on ODIN and select this file.
Everything should be as shown here: http://gyazo.com/fea7a1c8b7a7b5bb287fb0a0c70056dc
Click Start and wait for it to do it's thing. It'll take quite a few minutes.
When it's finished, you're done.
If it hangs on boot ones it flashed, reboot to Stock Recovery and do a factory reset it should boot up fine now, (also 1st boot takes about 3 minutes.)
Let me know how it goes
EDIT: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Stock Firmware is on this page
Sent from S3 Mini
Using XDA App
Click to expand...
Click to collapse
As I'm on a mac, I tried jodin, but it doesn't seem to recognize my phone.
Sorry
Sent from S3 Mini
Using XDA App
So, my phone is bricked?
Last try: A windows computer and it worked. Don't know why it didn't work on my mac.
Awesome. I'm happy for you mate. Glad you got it fixed
Sent from S3 Mini
Using XDA App
No not at all.your phone not brickd.only one option is to flash your phone via odin on 4.3 available on sammobile.
Hot thanks?
Sent from my GT-I9300 using XDA Free mobile app