Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Related
Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
Hey guys,
I tried upgrade to ICS via Kies and the upgrade failed and the phone stopped rebooting. So, I tried to do a recovery via Odin but instead of clicking the PDA button and flashing, I click the Bootloader button and flahed. Now I can't enter the download mode and the phone just keeps rebooting. Is there anything I can do to get into the download mode?
Thanks
Might be a chance that a jig could work. If not, JTAG or Samsung service center.
Thanks
I guess it's time to upgrade to the SIII then....
messing wiv the bootloaders is dangerous i think ,phone needs service center now...
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
crazy_android said:
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
Click to expand...
Click to collapse
Actually, a usb jig won't recover a hard bricked device. His device does boot up so it's not a hard brick and there may be a chance.
Sent from my GT-I9100 using xda premium
The device sounds fine, just seems like you're not getting the button combo done quick enough or correctly. Pull the battery first, if it boots into a loop instantly, hold the combo while inserting battery.
using a jig will be a good idea
I should mention that it only starts booting up but never actually goes past the boot up screen. The blue bar stops almost at the end and doesn't go any further.
So, I got a usbjig today and was able to enter the download mode but all attempts to flash through Odin have failed...
Any suggestions?
Without seeing the log from Odin (you could always upload a screenshot; but it probably won't make a lot of difference), hard to say definitively. But being a betting man I'd wager the NAND is completely stuffed therefore service centre job.
The story:
Got a phone with some software problems when calling from a spouse. Tried to update the ROM and it bricked.
Status:
endless loop of bootscreen
could enter recovery mode and boot CWR
can not enter download mode
unable to boot system
Tried endless guides and instructions with stock ROM's and firmwares. Some of them installed some didnt - none worked. Still in endless loop.
Gave up yesterday and went to bed to keep trying today.
Now its totally bricked.
- no recovery mode
- no download mode
- no boot screen
- cant connect to PC via USB (Odin wont recoqnize)
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
elisterr said:
The story:
Got a phone with some software problems when calling from a spouse. Tried to update the ROM and it bricked.
Status:
endless loop of bootscreen
could enter recovery mode and boot CWR
can not enter download mode
unable to boot system
Tried endless guides and instructions with stock ROM's and firmwares. Some of them installed some didnt - none worked. Still in endless loop.
Gave up yesterday and went to bed to keep trying today.
Now its totally bricked.
- no recovery mode
- no download mode
- no boot screen
- cant connect to PC via USB (Odin wont recoqnize)
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
Click to expand...
Click to collapse
You can try this guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Make sure to use the key combination of Download Mode for your device as the one mentioned in the guide is for Samsung Galaxy Ace S5830. If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
elisterr said:
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
Click to expand...
Click to collapse
1. make sure you have installed drivers on your computer
2. remove battery > connect phone to computer > press volume buttons and lock key
3. if you get a black screen just press the volume up button.
odin will recognize the device
if this does not work then try multi-formatter
using it, format rfs partition and then install some custom rom.
link to multi-formatter thread : click here
mahithm said:
You can try this guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Make sure to use the key combination of Download Mode for your device as the one mentioned in the guide is for Samsung Galaxy Ace S5830. If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
elisterr said:
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
Click to expand...
Click to collapse
Go to service center and tell them to flash mobile
Sent from my GT-S5830i using Tapatalk 2
elisterr said:
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
Click to expand...
Click to collapse
I'm sorry to hear that. Now as the last resort, you can consult the Service Centre.
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
dorian_nadaud said:
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
Click to expand...
Click to collapse
Flash this Stock recovery via odin : http://d-h.st/hcA
Instruction:
1) Put phone in download mode by powering off ,home button and volume down while plugging the phone into the computer(if don't and don't understand search google their are many guides and videos for it)
2) You should now see the first square in Odin turn yellow and say "Ready"
3) Click on the pda tab in Odin and select the Stock_Recovery_GT-I8552.tar you downloaded
4) Click start and wait for your phone to reboot
5) Done!
Well, I should have added that to the list of things that I have tried before. The only divergence to your methode is the fact that the keys to force start the downloading mode does not work so I only can acces it thrue a restart in downloading mode within CWM...
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
my GT-i8552 stuck in cwm boot looping
dorian_nadaud said:
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
Click to expand...
Click to collapse
I also have the same problem. I have read all threads from google about this matter, that say flash rom, clear whatever2, blaz bla
BUT, still for 3 days I cant fix it. when it stuck in boot looping or turn off, odin didnt recognise my phone
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Also: if Odin don't recognize your phone, try to change your usb cable
Changing PCs worked for me a while back.
not working
devesh9 said:
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
hi, i have install kies and odin. but with problem of cwm boot, pc/ odin/kies cant recognize my i8552 since it need to be turn on in normal mode. i have tried with another cable and port, as well as from pc to laptop, but still not recognize. pls help me
Does Odin recognize your phone when in download mode?
freitaz said:
Does Odin recognize your phone when in download mode?
Click to expand...
Click to collapse
not either. because my phone need to be turned on in normal mode when connect to my pc, then i need to choose the usb option whether to transfer files/camera/charging.
and only then Odin say "ready"
Do this: put your device in download mode and then you reflash firmware with Odin.
You can do this by turning your phone on pressing the buttons HOME, POWER and VOL DOWN. When your phone vibrates, release POWER and keep pressing ther other two. A screen with a warning will appear, and you press VOL UP to confirm. After that, you open Odin, plug your phone on computer and select the stock firmware by clicking on button "PDA" at Odin. And then it is just start and wait.
Same Problem
my samsung grand quattro get stuck at cwm too.. it keep booting to recovery mode when phone start up, I cant connect to Odin because I cant access to debugging setting.. HELP PLEASE :crying: