i tryed to installl some themes with metamorph then it went down hill......my phone went to reboot and is still going to it every 3-4 mins.....i tryed tO go into xrecovery but it wouldnt let me and i tryed the factory reset option in settings but that wouldnt work now im trying to restore with pc companion but sadly the notification bar wouldnt pull down to mount it....my phone has no signal ...says there is no sd card somehow it DELETED titanium backup!?!?!? wtf help plz????? im on 54 bb with custom mod: 6.1.3 cynagen gingerbread mod.................is there any other way to restore the phone?????
You need to use flashtool to fix the problem. I will post links shortly.
Sent from my Atrix 4G with XDA Premium App
Flashtool:
http://forum.xda-developers.com/showthread.php?t=920746
Guide to use Flashtool:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
the flashtool stilll doesnt pick up the phone at all what do i doo???
You messed up the partitions when you were messing around with xRecovery.
Start from scratch.
Do not use PC Companion. Download SEUS from Sony and reinstall/repair/flash back to stock.
Then try again. Turn on Unknown Sources, and Debug mode
Go through Flash Tool again...root....click button to install xRecovery apk....then in the flashtool menu, chose to to start in xRecovery mode.
If flashtool doesn't detect the phone at all....then make sure you are using the original USB cord, and try using another USB port on your computer.
ok ill try it!
my phone wont do the plug in chord and hold back button method i tryied it
guomonster said:
my phone wont do the plug in chord and hold back button method i tryied it
Click to expand...
Click to collapse
Wait 30 seconds, hold down back button, then plug cord into phone. Do it in that order
Sent from my Atrix 4G with XDA Premium App
The problem isn't the phone.
This time, remove the back and battery from the phone.
plug the USB cable into the phone and computer....then at the point during the SEUS repair where it asks to plug the phone in and hold the back button, hold the back button and stick the battery back in the phone.
The LED on the phone I believe will flash.
SEUS will say it's installing or updating.
If problem still persists, use a different USB port.
The USB port on the side of my laptop worked 3 out of 4 times. The one's on the back haven't failed me once.
beau420 said:
The problem isn't the phone.
This time, remove the back and battery from the phone.
plug the USB cable into the phone and computer....then at the point during the SEUS repair where it asks to plug the phone in and hold the back button, hold the back button and stick the battery back in the phone.
The LED on the phone I believe will flash.
SEUS will say it's installing or updating.
If problem still persists, use a different USB port.
The USB port on the side of my laptop worked 3 out of 4 times. The one's on the back haven't failed me once.
Click to expand...
Click to collapse
HEY! its working so far!!! thank you everyone for helping DDD
yes it worked! good thing i had a backup of the mod before all this DD
Related
Hello dear xda users.
Today since 1-2 hours ago something terrible happened. My X10i .. keeps rebooting at the "Sony Ericsson" startup.
History:
I updated to 2.2 Beta 4, but I forgot to update the kernel so the phone kept rebooting, but not at startup, only after a couple of minutes.
I flashed to the required kernel, but decided to go back to Beta 3 instead, and the same problem occured here too, also that the wifi and mobile network were out of function.
And I remembered that I had made an backup of my original version with xRecovery, so I restored the phone and tried to switch back to Beta 3 and this is when the **** happened..
Am I screwed?
Stuffs Ive tried:
* Flash the version back (cannot enter flash mode anymore) = fail
* Tried to make a factory reset through PC Companion (cannot enter flash mode) = fail
I need help guys, this phone is only 2 weeks old. I just want to cry, dunno what to do
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Freak174 said:
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Click to expand...
Click to collapse
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
rendeiro2005 said:
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
Click to expand...
Click to collapse
Thanks for the reply, but how am I supposed to flash if I cant get the green light (called flashmode?)
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
rendeiro2005 said:
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
Click to expand...
Click to collapse
Yea I already tried that out, without success..
Freak174 said:
Yea I already tried that out, without success..
Click to expand...
Click to collapse
i just remember something that`s basic
remove/install PCC & SEUS again you may have a problem with drivers
HAHAH I WAS PRESSING THE DAMN BUTTOM IN THE MIDDLE FOR CHRIST SAKE! HAHAHAHAHAAH
You know when you get so, what should I say.. scared of not being able to solve it, you get blind!
IM SO FUUUUCKING GLAD SORRY FOR THE F WORD BUT YEEEEEEAAAA
Lol... But good that you can go on again....
sent from my 2.2 X10
Hi all. I have multiple problems in my x10i.it has 2.1 It was rooted and worked fine..few days ago I tried to wipe the phone and did the master reset via xrecovery ..after the restart it just hanged at the boot logo and xrecovery is not working from then....I wanted to update with SEUS via USB... but the phone is not connecting as well...What should I do? PLZ HELP ME GUYZ........
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
If SEUS/PCC doesn`t recognize your phone, remove them from PC and reinstall them.
You have an USB driver problem
ohm74 said:
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Click to expand...
Click to collapse
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Take the phone with the warranty for repairing.
mistake_man said:
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
Click to expand...
Click to collapse
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
iMatth3w said:
Take the phone with the warranty for repairing.
Click to expand...
Click to collapse
I bought it from ebay ...no warrenty... think thats stupid :/
rumanbsl said:
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Click to expand...
Click to collapse
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
rumanbsl said:
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
Click to expand...
Click to collapse
Well your usb is definitly working then as its glowin green?..
Are you sure you are doing it all right? It happened the same to me, and it ended I was pressing the wrong buttom (I knew which one was the correct one, but was blind cause I was scared that Ive broke it totally), a day later I noticed it and I was able to flash my phone.
However, read a guide and follow it step by step, reinstall everything and start from beginning maybe?
Or use the repair function with PC Companion
Hi! I had the same problem!
1. Search and download from this forum Flashtool 0.2.6
2. Install it.
3. Download from this forum one generic ROM (for exemple X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 )
4. Put the file in directory Flashtool/firmware
5. Launch X10flashtool.exe
6. DO NOT PUT THE USB CABLE IN THE PHONE
7.From option "flash select the desired ROM
8. Wait the program to begin(a picture will appear)
9. Pressing the back button, insert the usb cable.
10. Wait the flashing to begin and release the back button.
Follow instructions and WAIT around 5 minutes until flashing will complete
11. Send me two words if it helps you! Success!
ohm74 said:
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
Click to expand...
Click to collapse
I've did everything as u told.....no luck ! guess its the time to go to repair center...btw a guy from help center told me about software tampered,,!!out of luck
Today I upgraded to the official Gingerbread rom using SEUS. I wanted root, so I tried aZuZu's method:
http://forum.xda-developers.com/showthread.php?t=1196421
But after I rooted the phone, I can't flash anything using Flashtool or SEUS. No green light, no matter what I do it boots up into the Sony Ericsson logo. I can't even leave my phone turned off, it turns on automatically and stops at the Sony Ericsson logo. Any help will be GREATLY appreciated!
Remove battery. Leave USB plugged into computer and phone.
Open x10 Flashtool and get ready to flash the Upgrade.
Hold the Back button on the phone and slip in the battery. Hopefully that gets it to flash.
Otherwise, install SEUS or PC Companion and try the same thing.
After running the Downgrade....the phone will not boot...that is normal....same after rooting...still won't boot until you get that Update back on there.
Or restart
beau420 said:
Remove battery. Leave USB plugged into computer and phone.
Open x10 Flashtool and get ready to flash the Upgrade.
Hold the Back button on the phone and slip in the battery. Hopefully that gets it to flash.
Otherwise, install SEUS or PC Companion and try the same thing.
After running the Downgrade....the phone will not boot...that is normal....same after rooting...still won't boot until you get that Update back on there.
Or restart
Click to expand...
Click to collapse
See, this is exactly what I've tried. Multiple times. I've removed the battery, held the back button and tried to get the phone into Flash Mode. I've done this with both Flashtool and PC Companion and it won't work. I can't access xRecovery either.
If you can't boot into flash mode, you are up poops creek.
Maybe try another USB cable or a different port on your computer.
When you do hold the back button when the phone boots up do you hear the camera noise it makes?
Make sure your phone has juice in the battery.
Remove battery...disconnect USB from PC....have Flashtool ready to go. In the Flashtool tips it does mention some people have had problems with PC Companion and SEUS interfering with the x10 Flashtool....could try uninstalling those.
Then when the x10 Flashtool is ready, plug back in the USB, hold back button and slip in the battery. Definitely try using a different USB port. All else fails....different cable, and computer.
beau420 said:
If you can't boot into flash mode, you are up poops creek.
Maybe try another USB cable or a different port on your computer.
When you do hold the back button when the phone boots up do you hear the camera noise it makes?
Make sure your phone has juice in the battery.
Remove battery...disconnect USB from PC....have Flashtool ready to go. In the Flashtool tips it does mention some people have had problems with PC Companion and SEUS interfering with the x10 Flashtool....could try uninstalling those.
Then when the x10 Flashtool is ready, plug back in the USB, hold back button and slip in the battery. Definitely try using a different USB port. All else fails....different cable, and computer.
Click to expand...
Click to collapse
Well ****! For some reason it worked this time around. After trying to flash like normal, all I had to do was keep the back button pressed while inserting the battery. Thank you!
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
Hello!
I read for hours now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Because of this , cannot reflash with the tool, because it's waiting for the recognized device too..
when i press the back and connect the cable, the green lighting for a minute , and turns of..
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Try flashing back to stock non root. It may suck but at least you'll have a starting point. It'll read. Ust make sure you have newest flashtool. Just had the same problem with my x10. Its still havin troubles tho.
Stuck using xda app-developers app on a motorola backflip.
THeLogiC said:
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Click to expand...
Click to collapse
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
gyurc said:
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
Click to expand...
Click to collapse
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
luck_shawn said:
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
Click to expand...
Click to collapse
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
gyurc said:
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
Click to expand...
Click to collapse
Hey go back to stock 1st then try rooting later,
1) launch pc companion
2) select support zone
3) now select phone software update
4) then click on repair phone
Now software will download the stock ROM along with stock kernel..
When the software asks you to connect in flash mode, do the following
1) turn off the phone
2) Remove battery
3) Connect the USB cable to phone as well as to the laptop
4) Place the battery back while holding down the back button (3rd button from the left)
5) Green light should glow and the stock ROM and kernel should be flashed automatically..
When it's done you should have a stock unrooted X10, if you want then flash custom Rom after rooting it, be sure to unlock the boot loader if u want to flash custom kernel... Good luck
Sent from my X10S using xda app-developers app
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
gyurc said:
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
Click to expand...
Click to collapse
what do you mean by flashtool cant be done?
try this:
1) open flashtool
2) press the flash button and select any stock ftf firmware
3) now after pop up comes to connect phone in flashmode---- remove battery, connect the phone via usb, and lastly pressing back button insert battery simultaneously.
Now the flashing should start hopefully.
if this doesnt work please post the error you get in flashtool
i have the same problem with my phone only mine is x10i i reflashed 2.3.3. ftf ..like 7..8 times ..and still not working..btw smth the flashtool give me some error ..and other times works and says that the phone was flashed ..but phone still only 1 virbate and 1 blink green light now i am kinda bumped because i repair it once ...and now has the same problem
hello all!
thanks for all help.
What happened:
Hopefully i found the USB port have error. If is stand in half leg, not breathing for a minute and beg for christmas the connection made successfully, and first the SEUS , after the flashtool can recognize the phone well.
Now the phone working perfectly and going to my friend's service for fix the usb port problem.