[Q] How do you charge the Gtab? - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

I have tried to re-charge my gtab but for some reason when I plug it in to my wall's outlet, it does not charge at all. Either mine is defective or I am doing something wrong.

jlarios178 said:
I have tried to re-charge my gtab but for some reason when I plug it in to my wall's outlet, it does not charge at all. Either mine is defective or I am doing something wrong.
Click to expand...
Click to collapse
Did you try connecting to other wall outlet? If yes, and still not working for Gtab 10.1, but work for other devices, you might need to exchange your tab for the new one.
Mine works fine without any issues. And I don't think there's any special way to connect the power adapter. The connector can hook up to your Gtab only in one direction (Samsung logo facing up towards the screen).

I asked Steve Jobs and he says your doing it wrong.
But just in case. Have you tried multiple outlets. The charging while on/off. loose connection. I know it all sounds stupid but you have to rule out the obvious before you think there's an issue. So far as I'm aware you're the first person that has an issue just charging his tab on here.

verusevo said:
I asked Steve Jobs and he says your doing it wrong.
But just in case. Have you tried multiple outlets. The charging while on/off. loose connection. I know it all sounds stupid but you have to rule out the obvious before you think there's an issue. So far as I'm aware you're the first person that has an issue just charging his tab on here.
Click to expand...
Click to collapse
Yes, there's no other outlet in my house that does any different whether my Gtab is on/off. It looks like mine is defective and I'm going to have to make a trip back to Best Buy. Thanks for the help.

jlarios178 said:
Yes, there's no other outlet in my house that does any different whether my Gtab is on/off. It looks like mine is defective and I'm going to have to make a trip back to Best Buy. Thanks for the help.
Click to expand...
Click to collapse
I too had this feeling that there's an issue. After complete discharge, it takes about five mins of charging for the gtab to even display the charging symbol.

Related

I don't understand the charger

So poorly made, yet so unavailable. My wiring was starting to get torn apart on it and eventually stopped working.
6 hour flight Monday with a dead Transformer, FML!
Any options?
You can make one with few simple parts.
tengtengvn said:
You can make one with few simple parts.
Click to expand...
Click to collapse
+1
I used this method: http://forum.xda-developers.com/showthread.php?t=1210638
It works great! As long as you still have a working usb cable.
I bought new charger and still won't charge normally. now the only thing to consider is the cable. but I can still use it to transfer data.
Which charger?
Which charger did you buy? I hope you are aware the TF requires a 12v charger not 5 like most devices.
drs6222 said:
So poorly made, yet so unavailable. My wiring was starting to get torn apart on it and eventually stopped working.
6 hour flight Monday with a dead Transformer, FML!
Any options?
Click to expand...
Click to collapse
If you are in the US Office Depot sells the charger and cable for $30 or so.
http://www.officedepot.com/a/products/768723/ASUS-Power-Adapter-For-Eee-Pad/

Won't charge... feels like charging outlet is loose

Today I woke up and found that my phone wasn't charging. When I plug in my charger it feels loose and moves around. Tried buying a new charger and same thing. Its like I have to hold the thing in a certain place for it to chaste and as soon add I let go it stops charging. I did just flash a new rom last night, not sure if that has anything to do with it. Any suggestions? Phone is 2 yrs old and out of warrenty.
itsLYNDZ said:
Today I woke up and found that my phone wasn't charging. When I plug in my charger it feels loose and moves around. Tried buying a new charger and same thing. Its like I have to hold the thing in a certain place for it to chaste and as soon add I let go it stops charging. I did just flash a new rom last night, not sure if that has anything to do with it. Any suggestions? Phone is 2 yrs old and out of warrenty.
Click to expand...
Click to collapse
when you say that your charging outlet feels loose, do you mean the area that you plug your charging cord into on your phone?
You might need to replace the micro USB port on your phone. I sent my phone to MobileTechVideos and they replaced it for me. It'll cost about $35 for the service though.
Like when I plug my phone in to charge, it kinda wiggles around like it shouldn't. It should just plug in and be tight. Not sure how this happened. Is there anything else that can be done other than sending it in? I don't have another T-Mobile phone to use in the mean time
Xenoism said:
when you say that your charging outlet feels loose, do you mean the area that you plug your charging cord into on your phone?
Click to expand...
Click to collapse
Yep, that's what I'm talking about
FaultException said:
You might need to replace the micro USB port on your phone. I sent my phone to MobileTechVideos and they replaced it for me. It'll cost about $35 for the service though.
Click to expand...
Click to collapse
Could this be due to flashing a new rom? Didnt start until day I flashed D9. Im not sure what to use as a phone in the meantime.
itsLYNDZ said:
Could this be due to flashing a new rom? Didnt start until day I flashed D9. Im not sure what to use as a phone in the meantime.
Click to expand...
Click to collapse
No. I doubt that the installation of a virtual rom would cause the damage of a physical charger jack. However, that day, did you violently yank the charger cable out of the device? Or anything to that sort?
Sent from my SGH-T959 (Samsung Vibrant)
N00B_IN_N33D said:
No. I doubt that the installation of a virtual rom would cause the damage of a physical charger jack. However, that day, did you violently yank the charger cable out of the device? Or anything to that sort?
Sent from my SGH-T959 (Samsung Vibrant)
Click to expand...
Click to collapse
Nope, ive always been really careful with this phone. i think its been getting loose the past 6 months or so. I realllly dont want to get a new phone. I really like my Vibrant
I just want to know that if I send it somewhere that they can actually fix it. I can connect and mount if I need to, but its just odd that I have to hold it a certain way for it to start charging. When i put it down it stops. Tried 3 different chargers, all from tmobile store.
I actually just flashed ICS passion and had the same exact issue. I never thought it could be due to the flash and assumed it was just hardware.
For me, what fixed (or helps) this issue -
Plug the cord in so its sticking in the charging slot as best as possible, than flip the phone on its face while the cord dangles off of a table or whatever you charge it on. (this puts pressure against the cord/phone slot in the reverse direction, and at least for me, would charge the phone)
Hope that made sense and helped!

New Charging Port - Still not charging!

Just replaced the charging port on my ATT SGII i777. Still not charging. Any ideas on what to try next?
The charge port I bought was for a i9100 but I was under the impression that they were interchangeable:
I've tried several chargers so I'm pretty sure it is not the charger,
-- Bud
Cable? Have you tried a different charging cable?I know it sounds ridiculous but I remember someone posting that fixed their issue.
Phalanx7621 said:
Cable? Have you tried a different charging cable?I know it sounds ridiculous but I remember someone posting that fixed their issue.
Click to expand...
Click to collapse
Yes. Charger and cables. tried like 4 different one including two samsung ones.. I also plugged it into the computer and it is not detected at all.
After my original post, I noticed that my cellular service wasn't working either. Cleaned up the old port with a good dose of rubbing alcohol and a soft toothbrush and put it back in. Charger still not working but the cell service is back.
The markings on both boards say GT-i9100 and rev2.2 but the original says R.B82 and the replacement says says R.B84. I doubt that means anything.
Any other ideas or testing to do? Luckily I ordered an external charger and extra battery so I am not dead in the water.
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
I tried this one from ebay and it did not work (can't post link so it's ebay item # 330880743336
Im thinking of trying the one you linked. Could I ask when you bought your GS2? I got mine about a mnth after it came out. If you got yours at the same time maybe ill take the risk of buying another board.
changes13 said:
I tried this one from ebay and it did not work (can't post link so it's ebay item # 330880743336
Im thinking of trying the one you linked. Could I ask when you bought your GS2? I got mine about a mnth after it came out. If you got yours at the same time maybe ill take the risk of buying another board.
Click to expand...
Click to collapse
I got mine in the Fall of 2011 right when they came out... -- Bud
you know, I didnt use my i777 for 6 months, and I went to charge it and it wouldnt charge... It would just sit there with the captivate lights blinking rapidly like it wanted to start, and didnt... Long story short, I took the battery out of my i777 and used my t989 as a temporary charger just to get some juice in there (to about 10 %) and switched it back to the i777 and the i777 charged it no problem after that. I think there could be an issue with the i777 firmware which doesnt charge a battery that has gone to complete dead.
I have no issues charging or connecting to adb now
ssmr2t said:
you know, I didnt use my i777 for 6 months, and I went to charge it and it wouldnt charge... It would just sit there with the captivate lights blinking rapidly like it wanted to start, and didnt... Long story short, I took the battery out of my i777 and used my t989 as a temporary charger just to get some juice in there (to about 10 %) and switched it back to the i777 and the i777 charged it no problem after that. I think there could be an issue with the i777 firmware which doesnt charge a battery that has gone to complete dead.
I have no issues charging or connecting to adb now
Click to expand...
Click to collapse
It is because the usb port that we have on our phone is not that great. Before I got my port fixed by Samsung, it would not be able to charge an empty battery, but now it is fine. Although sometime when the battery get too hot, it just through the phone in a loop of charging just enough to boot then shut down again.
You need I9100 gt model Rev 2.3 to replace sgh i777 At&t usb flex cable.
I just changed mine. Mine was rev 2.3. I got mine ebay at the "Cellphone-Repair-Shop" Search for "usb flex cable i9100 gt" model. It has to be the Gt model and it has to be The rev 2.3. So ask your seller before you buy. I believe the cellphone repair shop only sells 2.3.
I did put the Non-GT model in first because I read several reviews that it would work if I bought it from a specific store. This turned out to be a misplacement of many reviews. I am returning that one tomorrow. The wrong one charged for a day. Then nothing... and it caused all kinds of reception problems. Pretty much made phone useless.
Now with the Gt model in, when I connect to computer (wouldn't work before) it reads in explorer that this is a i9100 gt model phone. I do believe it is the new usb port that causes this to be read as a Gt i9100 and not the warning screen caused by rooting.
I wonder if this will cause any problems when flashing roms or anything else like otg usb mounting.
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
-- Bud
Click to expand...
Click to collapse
This one also worked for me, thanks Bud!! I also got my phone in Oct of 2011.
when charger plugged in it goes on and off
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Bud,
When I plug in my charger the charging circuit goes on and off. I have a tone that dings once (or makes a "BEDUP' sound) indicating the charger is charging and it sounds like a bell indicating that the charger circuit connects and disconnect even before the BEDUP sound can fully complete! LOL Well instead of just one 'bedup' sound it bedups then bedups again! and again etc. The actual indicator on the battery icon goes on then off in sync to the bedups. I suspect its the dock connector charging port but am not positive. I have two I777's; the second one charges fine with the same usb cable so the cable is ruled out. I also had trouble using ODIN and getting my drivers to load in windows "Intermittently", but only on the SUSPECT I777.
Sometimes I can get it to charge by holding the USB cable either pressed upward or downward but it I change pressure at all it will go out.
Were the actual metal strips on your dock connector worn out? That is what I am thinking my issue is. If so It will require another charging port.
After reading your post an reevaluating my issues I am even more sure it is the charging port, but would appreciate any input you may have about your experience!
Thanks for your input!
cduced said:
Just a quick update - I bought several other charging ports before I finally found one that works. The one that worked was on ebay from muchbuy-outlet. I emailed them prior to purchasing. They said it would work and it did. Here is the link will expire at some point...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Hey, thanks for the info.
My i777 device has the same issue. But the item in the above link does not ship to my country.
So I checked on ebay for another S2 REV 2.3 usb flex cable and found this.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140959296482
But in the cable you have bought it says "R.CB4 28 GT-I9100 REV2.4" and on my selected cable it says "R.CA4 GT-I9100 REV2.4"
Is that a big difference or should I not worry about it?
Thanks!
MWTTRON said:
Bud,
When I plug in my charger the charging circuit goes on and off. I have a tone that dings once (or makes a "BEDUP' sound) indicating the charger is charging and it sounds like a bell indicating that the charger circuit connects and disconnect even before the BEDUP sound can fully complete! LOL Well instead of just one 'bedup' sound it bedups then bedups again! and again etc. The actual indicator on the battery icon goes on then off in sync to the bedups. I suspect its the dock connector charging port but am not positive. I have two I777's; the second one charges fine with the same usb cable so the cable is ruled out. I also had trouble using ODIN and getting my drivers to load in windows "Intermittently", but only on the SUSPECT I777.
Sometimes I can get it to charge by holding the USB cable either pressed upward or downward but it I change pressure at all it will go out.
Were the actual metal strips on your dock connector worn out? That is what I am thinking my issue is. If so It will require another charging port.
After reading your post an reevaluating my issues I am even more sure it is the charging port, but would appreciate any input you may have about your experience!
Thanks for your input!
Click to expand...
Click to collapse
Sorry I missed this but anyone having this issue should first try cleaning the port with a small brush (soft toothbrush or I used these: http://www.dentek.com/product/144/easy-brush-cleaners/) dipped in isopropyl alcohol. That may help (or not). If that doesn't solve the problem, you are going to need to swap out the charging port. -- Bud
igayan1991 said:
But in the cable you have bought it says "R.CB4 28 GT-I9100 REV2.4" and on my selected cable it says "R.CA4 GT-I9100 REV2.4"
Is that a big difference or should I not worry about it?
Click to expand...
Click to collapse
It was hit or miss for me. I ended up buying tow before getting the 3rd to work. I finally emailed several sellers and bought one from a seller that told me it would work with the AT&T version and luckily it did. -- Bud

Bye bye touchpad :'( he wont charge any more

damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Try another USB cable
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
Click to expand...
Click to collapse
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
The usual HP TouchPad battery drain issues:
-If your battery is heavily drained, then you may need to leave it charging for a full day.
-When the battery is fully drained it can take the TP a longtime to reach even the lowest battery level.
-The USB cable that comes with the HP TP is often defective and breaks easily. Try using another USB cable if possible.
-The USB cable does not transfer enough power to effectively charge the tablet. You must use the wall plug when charging the HP TouchPad.
-To be safe don't let your HP TouchPad run out of Batteries ever! Install one of these free apps!
-You can add an automatic shutdown Rule by doing the following.
-AutomateIt, Play Store Link- What to do: New Rule/Trigger Battery level(Below 20%)/Action/Shutdown//save. Or
-Llama, Play Store Link- Location Profiles:Event tab choose + (at the bottom of the screen) Addcondition (battery Level Below 20%) Actions (turn off phone)
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge.
Click to expand...
Click to collapse
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
scy1192 said:
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Click to expand...
Click to collapse
+1
bdsee said:
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
Click to expand...
Click to collapse
tried every phone charger/usb cable i could find. web os said all voltage wa to low.
so damn. yeah i could buy a 25€ charger. i must see.
RolandDeschain79 said:
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
Click to expand...
Click to collapse
its already empty turned it off with 18% i got 5% battery in like 5hours i think.
then i was like **** that i turn it off.
i use airdroid. cause its anoying to go in recovery to go in usb massa storage. mtp doesnt do **** op ICS
but yeah. maybe i will buy the charger. i like android tablet. but saw the asus transformer t100 tablet with dock keyboard windows 8.1 tablet. 350€ 32gb. but more interested in the 380€ 64gb.
but yeah damn 380€ much but its good for studies and things full windows. but still im gonna want my android tablet.
so i think i will buy one day the charger. but euh, if my battery is empty does touchstone charge it from dead? other wise im ****ed...
Had some problem but solved
Hi reggiexp,
I had the same issue of touchpad not charging. But i used my Nokia lumia charger plugged into TP when it is dead throughout the night and found it 48% charged in the morning after i switched on. When i reconnected the tp when it was on it came to full charge in an hour. Try this.
Please ignore the warning that the USB cable is not genuine which comes when you connect different USB cable.
Hope it helps!
Thought I would post this just in case anyone else is looking for a solution here. Purchased this off Amazon: http://www.amazon.com/gp/product/B003ES5ZSW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Doesn't cause pop any warnings while charging. Still using the plug that was sent with the touchpad and it is working better than the other one. Feels a little more secure while plugged in.
I'm a big fan of the touchstone.
However I sort of have the opposite problem as both of my Touchstone chargers have quite working. Each at different times. My suspicion is they suffered the same faulty cable fate. Unfortunately I won't be purchasing another as they are to expensive to replace at this point.
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
reggiexp said:
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
Click to expand...
Click to collapse
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
DBak451 said:
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
Click to expand...
Click to collapse
Not dead just a miss connection cause it charges but slow. Toke me almost a week to fully charge it.
Tried different usb cables. Nothing helped.
Think it needs a new usb connector. But i dont use it. And didnt even try to take it apart. Im way to laxy its a grest tablet. Wantrd to give it to my mom but if it doesnt charge well my mom wont have any use for it.
Found a usb board 16euro +10euro sending. But yeah is it worth it... Will try to take my touchpad apart to see if its realy broken. And maybe repair it so my mom has a tablet again.
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
PunishedSnake said:
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
Click to expand...
Click to collapse
Don't know don't have a wireless charger
Now you talking about wireless charging i have a wireless charger now for my lg g3 what i don't use don't see the point of it. I should try with my touchpad lol
Or maybe dismount thr hole thing and look at thr usb port see if i can do anything about it. LoL.
Thanks for saying it.

Cheap magnetic charger can ruin your Z2

I just wanted to share with all of you my experince with some cheap magnetic charger which i bought from ebay for 3 or 4$ for Sony Z2. Cause i didnt know how to connect magnetic charger cable to the phone, and of course i connected it in wrong way,( +- reversed?!) my phone couldnt wake up. I tried charging through regular wall charger but phone still blinked ORANGE for whole night ( cca 14 hours) and still wasnt able to turn it on.
lunnnatic said:
I just wanted to share with all of you my experince with some cheap magnetic charger which i bought from ebay for 3 or 4$ for Sony Z2. Cause i didnt know how to connect magnetic charger cable to the phone, and of course i connected it in wrong way,( +- reversed?!) my phone couldnt wake up. I tried charging through regular wall charger but phone still blinked ORANGE for whole night ( cca 14 hours) and still wasnt able to turn it on.
Click to expand...
Click to collapse
Hey.
What happened to me happened to you.
I connected a regular charger only way I could turn on my device.
He turns on and turns off intermittently.
And at the end turn on.
What is a magnetic charge screwed.
And when I charges the device to 100% is starting to turn the power on and off as if he informs me full
And when I connect the device drive is not able to work well is acting as if something touches the screen and he can not recharge.
This thread should be renamed to "Cheap magbetic charger can ruin your Z2 if you're an idiot".
Sorry, but it takes a fair bit of effort to reverse the magnetic charging cable.
Hey, don't be so rude. It's not really this much of an effort. As far as I have seen in cheap magnetic cables the pins are not hidden and they are making contact with pins in phone without any effort. Original connector has a little bit retracted pins and won't damage your phone.
That's why I'm big fan of original or at least high quality accessories.
It's not that hard, in fact. Most of the cheap magnetic cables can be connected the other way around without any special effort. I did so for both Z1 and Z2.
Z1: Phone turns off, but works fine after disconnecting the charger.
Z2: Phone doesn't recognize the charger. No reboots. No damage.
( Of course, your mileage may vary... )
monry said:
Hey, don't be so rude. It's not really this much of an effort.
Click to expand...
Click to collapse
I'm not going to apologise for what I said. It actually does take a fair bit of effort to muck this up.
The Z2 has different size plastic mouldings around each pin which makes it quite difficult to actually reverse the magnetic charger, even the el cheapo ones.
In addition to that, don't you think it would be weird if the cable for the charger is going vertically up the phone, instead of going straight down towards the microphone?
So, this goes back to the OP, don't use a scare tactic title for the thread when the cable clearly isn't at fault.
This thread just says to me that people don't pay attention or to the very least, they don't do a simple bit of research first.
mine is worst. the magnetic charge port from my z2 come out from the phone.
Yeah because your an i***t. It's not the chargers fault but your fault. If you connect it the right way there is no problem at all with these magnetic charger from eBay. S***d thread
romdroid. said:
Yeah because your an i***t. It's not the chargers fault but your fault. If you connect it the right way there is no problem at all with these magnetic charger from eBay. S***d thread
Click to expand...
Click to collapse
"YOU'RE"
If you plan to insult people, which I don't recommend it here at XDA, learn some proper grammar.
That is all!!
Regards,
PS: Last and only warning about this type of behaviour, capisce?
M_T_M said:
"YOU'RE"
If you plan to insult people, which I don't recommend it here at XDA, learn some proper grammar.
That is all!!
Regards,
PS: Last and only warning about this type of behaviour, capisce?
Click to expand...
Click to collapse
LOL English is not my native language so I don't give a ****. And no.
romdroid. said:
LOL English is not my native language so I don't give a ****. And no.
Click to expand...
Click to collapse
Just ban this guy.
Jackos said:
Just ban this guy.
Click to expand...
Click to collapse
I am Pinging @M_T_M
thread closed for moderation......
PM me for issues
romdroid. said:
LOL English is not my native language so I don't give a ****. And no.
Click to expand...
Click to collapse
Toledo_JAB said:
I am Pinging @M_T_M
thread closed for moderation......
PM me for issues
Click to expand...
Click to collapse
Toledo, I have a low tolerance for this type of behavior and MTM is busy at the moment so I addressed and past Judgment here....

Categories

Resources