I just wanted to share with all of you my experince with some cheap magnetic charger which i bought from ebay for 3 or 4$ for Sony Z2. Cause i didnt know how to connect magnetic charger cable to the phone, and of course i connected it in wrong way,( +- reversed?!) my phone couldnt wake up. I tried charging through regular wall charger but phone still blinked ORANGE for whole night ( cca 14 hours) and still wasnt able to turn it on.
lunnnatic said:
I just wanted to share with all of you my experince with some cheap magnetic charger which i bought from ebay for 3 or 4$ for Sony Z2. Cause i didnt know how to connect magnetic charger cable to the phone, and of course i connected it in wrong way,( +- reversed?!) my phone couldnt wake up. I tried charging through regular wall charger but phone still blinked ORANGE for whole night ( cca 14 hours) and still wasnt able to turn it on.
Click to expand...
Click to collapse
Hey.
What happened to me happened to you.
I connected a regular charger only way I could turn on my device.
He turns on and turns off intermittently.
And at the end turn on.
What is a magnetic charge screwed.
And when I charges the device to 100% is starting to turn the power on and off as if he informs me full
And when I connect the device drive is not able to work well is acting as if something touches the screen and he can not recharge.
This thread should be renamed to "Cheap magbetic charger can ruin your Z2 if you're an idiot".
Sorry, but it takes a fair bit of effort to reverse the magnetic charging cable.
Hey, don't be so rude. It's not really this much of an effort. As far as I have seen in cheap magnetic cables the pins are not hidden and they are making contact with pins in phone without any effort. Original connector has a little bit retracted pins and won't damage your phone.
That's why I'm big fan of original or at least high quality accessories.
It's not that hard, in fact. Most of the cheap magnetic cables can be connected the other way around without any special effort. I did so for both Z1 and Z2.
Z1: Phone turns off, but works fine after disconnecting the charger.
Z2: Phone doesn't recognize the charger. No reboots. No damage.
( Of course, your mileage may vary... )
monry said:
Hey, don't be so rude. It's not really this much of an effort.
Click to expand...
Click to collapse
I'm not going to apologise for what I said. It actually does take a fair bit of effort to muck this up.
The Z2 has different size plastic mouldings around each pin which makes it quite difficult to actually reverse the magnetic charger, even the el cheapo ones.
In addition to that, don't you think it would be weird if the cable for the charger is going vertically up the phone, instead of going straight down towards the microphone?
So, this goes back to the OP, don't use a scare tactic title for the thread when the cable clearly isn't at fault.
This thread just says to me that people don't pay attention or to the very least, they don't do a simple bit of research first.
mine is worst. the magnetic charge port from my z2 come out from the phone.
Yeah because your an i***t. It's not the chargers fault but your fault. If you connect it the right way there is no problem at all with these magnetic charger from eBay. S***d thread
romdroid. said:
Yeah because your an i***t. It's not the chargers fault but your fault. If you connect it the right way there is no problem at all with these magnetic charger from eBay. S***d thread
Click to expand...
Click to collapse
"YOU'RE"
If you plan to insult people, which I don't recommend it here at XDA, learn some proper grammar.
That is all!!
Regards,
PS: Last and only warning about this type of behaviour, capisce?
M_T_M said:
"YOU'RE"
If you plan to insult people, which I don't recommend it here at XDA, learn some proper grammar.
That is all!!
Regards,
PS: Last and only warning about this type of behaviour, capisce?
Click to expand...
Click to collapse
LOL English is not my native language so I don't give a ****. And no.
romdroid. said:
LOL English is not my native language so I don't give a ****. And no.
Click to expand...
Click to collapse
Just ban this guy.
Jackos said:
Just ban this guy.
Click to expand...
Click to collapse
I am Pinging @M_T_M
thread closed for moderation......
PM me for issues
romdroid. said:
LOL English is not my native language so I don't give a ****. And no.
Click to expand...
Click to collapse
Toledo_JAB said:
I am Pinging @M_T_M
thread closed for moderation......
PM me for issues
Click to expand...
Click to collapse
Toledo, I have a low tolerance for this type of behavior and MTM is busy at the moment so I addressed and past Judgment here....
Related
I have tried to re-charge my gtab but for some reason when I plug it in to my wall's outlet, it does not charge at all. Either mine is defective or I am doing something wrong.
jlarios178 said:
I have tried to re-charge my gtab but for some reason when I plug it in to my wall's outlet, it does not charge at all. Either mine is defective or I am doing something wrong.
Click to expand...
Click to collapse
Did you try connecting to other wall outlet? If yes, and still not working for Gtab 10.1, but work for other devices, you might need to exchange your tab for the new one.
Mine works fine without any issues. And I don't think there's any special way to connect the power adapter. The connector can hook up to your Gtab only in one direction (Samsung logo facing up towards the screen).
I asked Steve Jobs and he says your doing it wrong.
But just in case. Have you tried multiple outlets. The charging while on/off. loose connection. I know it all sounds stupid but you have to rule out the obvious before you think there's an issue. So far as I'm aware you're the first person that has an issue just charging his tab on here.
verusevo said:
I asked Steve Jobs and he says your doing it wrong.
But just in case. Have you tried multiple outlets. The charging while on/off. loose connection. I know it all sounds stupid but you have to rule out the obvious before you think there's an issue. So far as I'm aware you're the first person that has an issue just charging his tab on here.
Click to expand...
Click to collapse
Yes, there's no other outlet in my house that does any different whether my Gtab is on/off. It looks like mine is defective and I'm going to have to make a trip back to Best Buy. Thanks for the help.
jlarios178 said:
Yes, there's no other outlet in my house that does any different whether my Gtab is on/off. It looks like mine is defective and I'm going to have to make a trip back to Best Buy. Thanks for the help.
Click to expand...
Click to collapse
I too had this feeling that there's an issue. After complete discharge, it takes about five mins of charging for the gtab to even display the charging symbol.
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Try another USB cable
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
Click to expand...
Click to collapse
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
The usual HP TouchPad battery drain issues:
-If your battery is heavily drained, then you may need to leave it charging for a full day.
-When the battery is fully drained it can take the TP a longtime to reach even the lowest battery level.
-The USB cable that comes with the HP TP is often defective and breaks easily. Try using another USB cable if possible.
-The USB cable does not transfer enough power to effectively charge the tablet. You must use the wall plug when charging the HP TouchPad.
-To be safe don't let your HP TouchPad run out of Batteries ever! Install one of these free apps!
-You can add an automatic shutdown Rule by doing the following.
-AutomateIt, Play Store Link- What to do: New Rule/Trigger Battery level(Below 20%)/Action/Shutdown//save. Or
-Llama, Play Store Link- Location Profiles:Event tab choose + (at the bottom of the screen) Addcondition (battery Level Below 20%) Actions (turn off phone)
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge.
Click to expand...
Click to collapse
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
scy1192 said:
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Click to expand...
Click to collapse
+1
bdsee said:
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
Click to expand...
Click to collapse
tried every phone charger/usb cable i could find. web os said all voltage wa to low.
so damn. yeah i could buy a 25€ charger. i must see.
RolandDeschain79 said:
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
Click to expand...
Click to collapse
its already empty turned it off with 18% i got 5% battery in like 5hours i think.
then i was like **** that i turn it off.
i use airdroid. cause its anoying to go in recovery to go in usb massa storage. mtp doesnt do **** op ICS
but yeah. maybe i will buy the charger. i like android tablet. but saw the asus transformer t100 tablet with dock keyboard windows 8.1 tablet. 350€ 32gb. but more interested in the 380€ 64gb.
but yeah damn 380€ much but its good for studies and things full windows. but still im gonna want my android tablet.
so i think i will buy one day the charger. but euh, if my battery is empty does touchstone charge it from dead? other wise im ****ed...
Had some problem but solved
Hi reggiexp,
I had the same issue of touchpad not charging. But i used my Nokia lumia charger plugged into TP when it is dead throughout the night and found it 48% charged in the morning after i switched on. When i reconnected the tp when it was on it came to full charge in an hour. Try this.
Please ignore the warning that the USB cable is not genuine which comes when you connect different USB cable.
Hope it helps!
Thought I would post this just in case anyone else is looking for a solution here. Purchased this off Amazon: http://www.amazon.com/gp/product/B003ES5ZSW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Doesn't cause pop any warnings while charging. Still using the plug that was sent with the touchpad and it is working better than the other one. Feels a little more secure while plugged in.
I'm a big fan of the touchstone.
However I sort of have the opposite problem as both of my Touchstone chargers have quite working. Each at different times. My suspicion is they suffered the same faulty cable fate. Unfortunately I won't be purchasing another as they are to expensive to replace at this point.
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
reggiexp said:
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
Click to expand...
Click to collapse
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
DBak451 said:
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
Click to expand...
Click to collapse
Not dead just a miss connection cause it charges but slow. Toke me almost a week to fully charge it.
Tried different usb cables. Nothing helped.
Think it needs a new usb connector. But i dont use it. And didnt even try to take it apart. Im way to laxy its a grest tablet. Wantrd to give it to my mom but if it doesnt charge well my mom wont have any use for it.
Found a usb board 16euro +10euro sending. But yeah is it worth it... Will try to take my touchpad apart to see if its realy broken. And maybe repair it so my mom has a tablet again.
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
PunishedSnake said:
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
Click to expand...
Click to collapse
Don't know don't have a wireless charger
Now you talking about wireless charging i have a wireless charger now for my lg g3 what i don't use don't see the point of it. I should try with my touchpad lol
Or maybe dismount thr hole thing and look at thr usb port see if i can do anything about it. LoL.
Thanks for saying it.
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
MrTheMan said:
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
Click to expand...
Click to collapse
Seems like hard to repair. You would need to disassemble the whole device. I'd suggest you send the phone for warranty repair. Just do not mention you let it fall
Jackos said:
Seems like hard to repair. You would need to disassemble the whole device. I'd suggest you send the phone for warranty repair. Just do not mention you let it fall
Click to expand...
Click to collapse
The whole glass back panel was into pieces. I replaced it, so I'm afraid that is not an option
MrTheMan said:
The whole glass back panel was into pieces. I replaced it, so I'm afraid that is not an option
Click to expand...
Click to collapse
Look into the Z2 disassembling videos, but I guess you should bring the device into a professional phones repair service.
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
If you keep tightly in some points, dies it charge then? If not and still charges intermediate then there are two things. Either one of the lines if the port is damaged or the battery is of center. Remove and reconnect. First clean it's contacts with.a brush and pure alcohol. Do the same on the port.
Mine does the opposite, USB is fine(as long as I disconnect at 100% and don't charge with MHL adapter) but magnetic has the issue.
Sent from my D6503 using Xparent Red Tapatalk 2
Upside down Magnetic charging cable
Jackos said:
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
Click to expand...
Click to collapse
Hi,
I did connect my magnetic charging cable upside down. And my magnetic port is messed up now. It keeps charging and discharging when connected. It doesn't charge from a USB port and i need to plug in the adapter to a wall outlet for it to charge.
Is there anything i can do to fix this?
Xperia Z2 Charging Problem
hi, i have also xperia z2. i have also micro usb and magnetic charging problem, charging icon will keep appearing and disappearing irregularly, about once per second. how can i solve the problem? thanks
MrTheMan said:
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
Click to expand...
Click to collapse
Jackos said:
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
Click to expand...
Click to collapse
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
imranclick said:
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
Click to expand...
Click to collapse
The Mainboard is bricked.
Jackos said:
The Mainboard is bricked.
Click to expand...
Click to collapse
Oh, I see. That will cost a lot of money to repair it.
imranclick said:
Oh, I see. That will cost a lot of money to repair it.
Click to expand...
Click to collapse
I'm sorry for your loss. It would be extremely hard to repair that by yourself. If you're out of warranty there is nothing you can do about it.
Jackos said:
I'm sorry for your loss. It would be extremely hard to repair that by yourself. If you're out of warranty there is nothing you can do about it.
Click to expand...
Click to collapse
Cannot repair it at all? Oh,well. Thank you very much for the reply. :crying::crying::crying:
imranclick said:
Cannot repair it at all? Oh,well. Thank you very much for the reply. :crying::crying::crying:
Click to expand...
Click to collapse
If I remember correctly there is one diode on the PCB that get's damaged :/
I have the same problem, due to magnetic charger..
Surely this is covered by warranty? I'm still under warranty so I will try to get a replacement.
How could they design it so poorly that it can be damaged like this....
Jackos said:
If I remember correctly there is one diode on the PCB that get's damaged :/
Click to expand...
Click to collapse
Oh, I search some info. The diode just allow electric current pass one direction only. No wonder my XZ2 keep restart after I pressed shutdown because the diode allow the electric current from battery can pass through in opppsite way.
I don't believe it is a hardware problem. You dropped the phone but the USB port is not likely to be physically damaged by a knock. I had the same problem, on a Z2 provided by my company. I have requested a change, got a new one and in a few days the second handset had the same issue too. Two phones, both new, both never dropped, used with maximum care, both with the same problem. The second one wasn't even charged more than a couple of times before failure. And I had tried it as soon as I had it in my hands, just to be sure it worked, and it did, at first. I connected it to a laptop thru USB port (3.0) and it charged. Then updated apps and system to Lollipop, connected it again and it failed. In a couple of days. I'm sure nothing physical happened, unless my USB port fried it. Notice however, that data connection is working perfectly and everything else I connecrt to that port works as well.
I have some mag chargers too, and I don't believe I've ever connected them upside down. The plug is made in such a way the it does not connect if reversed, having one contact circular shape and the other elliptical.
I checked on the Web and there is a number of Z2 owners complaining for the same issue: there's even a video on Youtube showing this exact behavior. Sony seems to ignore it.
I must admit, however, that I'm unable to explain why a factory reset does not solve the problem. Now I'm trying to flash a stock ROM (mine is branded Telecom Italia) and see what happens.
imranclick said:
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
Click to expand...
Click to collapse
Did you repaired your device. Please relpy this
Phone 2 years.
1. Charged through the USB port on the network 220 (native charger):
It reaches 81-83% of charge and starts to go crazy: flashing red LED charging and says that is / is not going to charge.
In fact, no charges.
I tried different cords and chargers - so everywhere is going crazy with a 80% interest
2. Charged via USB from the cigarette lighter in your car or the external battery:
It's okay - safely charged up to 100%
3. Charged through the magnetic cable:
It's okay - safely charged up to 100%
These are symptoms of what is dying?
Thank you!
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
I was in the same boat. The Sony dock looks nice like but it was fairly expensive.
I just ordered this last week:
http://www.amazon.ca/Magnector-Perf..._1_2?s=wireless&ie=UTF8&qid=1421124799&sr=1-2
I've got genuine Sony and this one as well. Sony charger is cut more precisely, phone is held exactly as it should with no wiggle etc. But this alone doesn't justify 10 times higher price. The cheapo one does the job in the same way, I see no difference in charging speed. For example this cable is OK as well. If you don't mind waiting for delivery (it takes about 4 weeks to Europe), I can only recommend these products and Aliexpress site.
Regarding the cables with LED indicator - I've got one and even if it's interesting I don't find it useful. LED light is always on and when it reaches ~95% battery threshold it starts to flicker until fully charged, then the color changes to solid again.
Is it hard to screw up the direction of the charger? I've heard it will completely discharge the battery (It shorts the terminals?)
Also, is there a thin case that has a slot for the magnetic charging / what cases do you use if any?
Thanks for the info guys!
Theoretically the plastic around the terminals should prevent the connector from actually connecting "the wrong way" but in practice it can still happen, especially if you insist in moving and pushing the cable.
If the cable is coming out from "the middle" of the connector is easier to put it wrong (otherwise is easy to remember the cable has to go from the middle of the phone to the bottom so is much harder to make the mistake). However because the phone is so symetric you might confuse the front with the back and put it in reverse even in the docking station.
And last but not least make sure you have good warranty - it is possible that the magnet will "suck out" the connector from the phone, mine is barely hanging and is supposed to be from the batch that fixed this issue.
I have the original Sony dock as well as a third party dock. I also have a magnetic adapter for micro USB. All are working fine. Here are the links:
Third party dock - this works fine with my Z2 even though the title says Z3.
Micro USB adapter
Thanks for the reply unni_kmr, unfortunately I'm in Canada and I can't order through amazon.com easily. (Also that isn't on amazon.ca)
Anyone have input on whether I should get this dock for $15?
http://www.amazon.ca/Patec®-Magneti...=UTF8&qid=1421438530&sr=1-15&keywords=z2+case
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
EDIT: Found this case, might try to cut a charging hole myself
http://www.amazon.ca/Xcessor-Vapour...id=1421440356&sr=8-2&keywords=z2+case+xcessor
WGuitar said:
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
Click to expand...
Click to collapse
I don't have a case. I am using the Mocolo tempered glass on front and back. I bought it from here. Its very thin glass. Even with it on the front and back, the phone slides into the docks easily.
slow charging speed
hi there, i recently updated my Z2 , to 4.4.4 and everything is absolutely as expected but magnetic charging speed has taken a serious blow. with 4.4.2 it was as fast as normal cable charging but now with 4.4.4 it has become extremely slow , almost takes 8 minutes to charge 1%, and more than 8-9 hrs to fully charge ..
anyone else facing a similar issue .....kindly suggest solutions.:crying:
thanks
WGuitar said:
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
Click to expand...
Click to collapse
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
y300owner said:
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
Click to expand...
Click to collapse
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
d210 said:
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
Click to expand...
Click to collapse
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
kuhno said:
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
Click to expand...
Click to collapse
Very expensive cable though...
And if you wiggle it a bit I'm sure you can make contact with it even in reverse. I assume it is using like any other cable the normal "mechanical protection" which consists in a tiny (fraction of a mm) extra plastic on the "lower" pin from magnetic connector.
Hi,
Please forgive me, I know how to use the search engine and look for topics, but I am just not capable right now. And I'm not capable for the same reasons that lead to my problem. I inserted my phone into it's charger backwards this morning. No, it's not a Sony charger. It sat there for at least 30 mins and the phone is now dead. I'm convinced the battery is toast, from threads I read some time ago. Would anyone here know of anything else? Is there a way to bring it back alive before I rush out and buy one?
Thank you if anyone replies.
By charger, you mean magnetic dock? If so, you've fried your mainboard, requiring that to be replaced.
dberladyn said:
Hi,
Please forgive me, I know how to use the search engine and look for topics, but I am just not capable right now. And I'm not capable for the same reasons that lead to my problem. I inserted my phone into it's charger backwards this morning. No, it's not a Sony charger. It sat there for at least 30 mins and the phone is now dead. I'm convinced the battery is toast, from threads I read some time ago. Would anyone here know of anything else? Is there a way to bring it back alive before I rush out and buy one?
Thank you if anyone replies.
Click to expand...
Click to collapse
gamer649 said:
By charger, you mean magnetic dock? If so, you've fried your mainboard, requiring that to be replaced.
Click to expand...
Click to collapse
Yes, if you plugged the magnetic charger upside down, unfortunately you'll need a new mainboard. You could try to repair the device using warranty service.
That sucks, I have a cheap cable but it won't fit on backwards. First thing I tested.
Sent from my D6503 using XDA Free mobile app