I've been trying to get Firefox connected to the internet on my lapdock and just can't. Not sure if it's the newer .30 radio baseband or what. My entitlement check is 0 and I've changed the APN's through root explorer as well with no luck. Anyone have a way to get it working? I've got CherryBlur 1.4, Faux's newest overclock webtop v1...Anything else I need?
Related
guys i need a help.
my friend baught htc hero european version yesterday. today i connected it with office wifi with wep and it worked like charm. then i upgraded his hero to modaco 2.8 and found wifi not working. wifi turns on but cant obtain ip from dhcp. i turned on manual ip but it cant browse internet. i restored from nandroid still cant browse internet.
any idea what can be done. my friend has become very upset.
btw... i tried 1.6 donut and still cudnt obtain ip from dhcp. and it can connect to open networks.
i also had wifi problems with 2.8. I just downgraded back to 2.7 and everything worked again. Try downgrading back to 2.7 with the update.zip
Have you updated the radio on the phone also?
If not, I would suggest that you do. Here's the link.
http://android.modaco.com/content/h.../09-10-hero-roms-radios-in-update-zip-format/
i dont get whats with the radio update and all.
will someone explain to me why is it important to upgrade radio?
shouldnt the ROM be enough?
inasar said:
i dont get whats with the radio update and all.
will someone explain to me why is it important to upgrade radio?
shouldnt the ROM be enough?
Click to expand...
Click to collapse
The "radio" is the firmware that controls the "phone" aspects of the handset, making calls, connecting to internet, wifi, GPS, GSM and lots of other things. Basically all the functions that use radiowaves or are wireless on the phone.
When upgrading to the custom ROMs, always read the instructions. Part of Modaco's posts regarding upgrading state that he would strongly installing the latest radios (through the link I previously supplied). If you don't follow the instructions properly, you're asking for trouble.
Everybody please note: There is nothing wrong with 2.8.
Important is to wipe completely and reformat and repartition sd card. Everything will work.
So I know there is the wireless teather for root but Is there anyway to get the stock wireless teather in froyo working. I'm running CELB Froyo and when I try to turn it on I just says error. I'm betting that it's because were still using the old kernel but to be sure I figured I should ask. So is it not working because the devs use the older kernel or am I missing something
hi my problem is that i cant get any data connection with any of the gingerbread roms....
i have tried different radios, including the ones that worked on 1.83 but i didnt help. i have tried different kernels didnt help. i have tried alien rom 1 and 2 and i have tried cherryblur 1.2 to 1.4d including kennethpenns rom ncrust and the other cherry rom.
what i did....
-flashed 1.26sbf(3g worked
-updated to 1.57(3g worked)
-updated to 1.83(3g worked)
-unlocked bootloader with pudding.sbf.
-installed cwm
-installed gingerblur 4.5(3g worked)
Wiped everything cache + factory even battery
-flashed Cherryblur 1.4d(example) everything worked except data(3g).
flashed faux kernels. (still no 3g)
flashed 4.591 radio from kennethpenns thread (no 3g)
flashed 1.83 radio(no 3g)
wiped everything again......
flashed fruit cake 1.83 (still no 3g)
flashed 4.591 radio from kennethpenns thread (3g working again on 1.83)
from here i tried starting from the top again and still no 3g.
so it seems that my 3g only works if i install 1.83 with 4.591 radio. any help would be apreciated.
sry for spelling mistakes and what not(from denmark)
my atrix is AT/T
best regards.
'update
now running clean 4.5.91 and it still doesent work ):
check your apn's
papand7 said:
hi my problem is that i cant get any data connection with any of the gingerbread roms....
i have tried different radios, including the ones that worked on 1.83 but i didnt help. i have tried different kernels didnt help. i have tried alien rom 1 and 2 and i have tried cherryblur 1.2 to 1.4d including kennethpenns rom ncrust and the other cherry rom.
what i did....
-flashed 1.26sbf(3g worked
-updated to 1.57(3g worked)
-updated to 1.83(3g worked)
-unlocked bootloader with pudding.sbf.
-installed cwm
-installed gingerblur 4.5(3g worked)
Wiped everything cache + factory even battery
-flashed Cherryblur 1.4d(example) everything worked except data(3g).
flashed faux kernels. (still no 3g)
flashed 4.591 radio from kennethpenns thread (no 3g)
flashed 1.83 radio(no 3g)
wiped everything again......
flashed fruit cake 1.83 (still no 3g)
flashed 4.591 radio from kennethpenns thread (3g working again on 1.83)
from here i tried starting from the top again and still no 3g.
so it seems that my 3g only works if i install 1.83 with 4.591 radio. any help would be apreciated.
sry for spelling mistakes and what not(from denmark)
my atrix is AT/T
best regards.
Click to expand...
Click to collapse
Ok maybe is time for clean starp up, DEEP CLEAN, I did this script for a friend and it help:
Need Windows PC and UNLOCKED BOOTLOADER
1. Download and extract/unzip the following file in a new folder (example C:\atrix):
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
2. You will end after extracted/unzip the file with something like this:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
3. Download the attached file "CLEAN_2.3.4_ATT.zip" and extract/unzip to the same location (example C:\atrix)
5. Run the script "clean" and follow exactly all the instrucctions!
6. This will install a Pristine Official ATT GB 2.3.4/4.5.91
Done!
Hope it help
By the way nice city Copenhagen specially the little, little mermaid I almost missed it!
hmm
i allready checked my apn's and made sure they were right. i am 100% sure that the apn i use is the same that i had on 1.83 were it worked i checked with my carrier and they said that allready had the right one...
but thx
This will install a Pristine Official ATT GB 2.3.4/4.5.91
could you pls exsplain that?
i have tried to avoid installing the official gingerbread as i heard the things about the sbf downgrades that is bricking people. and by doing it the way i did i could still flash sbf without problems at least for me it worked.....
because if the fix doesent work and i cant go back to 1.83 then i will not have any data connection and i realy need it ):
your help is apreciatet
papand7 said:
This will install a Pristine Official ATT GB 2.3.4/4.5.91
could you pls exsplain that?
i have tried to avoid installing the official gingerbread as i heard the things about the sbf downgrades that is bricking people. and by doing it the way i did i could still flash sbf without problems at least for me it worked.....
because if the fix doesent work and i cant go back to 1.83 then i will not have any data connection and i realy need it ):
your help is apreciatet
Click to expand...
Click to collapse
Yeap that script install the new bootloader ver. and you will NOT DOWNGRADE with previous MOTO sbf for example 1.26 1.57 1.83
So I think your way to make sure if it is software / hardware related will RSD a FULL 1.83 SBF and then apply your provider APN
Sent from my MB860 using XDA App
ah....
so if i install this i will get the updated bootloader and the official gingerbread ota?
and i will not be able to downgrade any more?
i will still be unlocked and such so that i can get alien rom back on there.........
correct me if i am wrong...........
89% done downloading your file.
if i install this would i still be able to use fruit cake to fix any problems and return to stock?
your script finished succesfully now to see if it works.........
hmm still no 3g connection after i ran you script and bootet then logging in to blur and adding my apn.........
any clues why?
papand7 said:
your script finished succesfully now to see if it works.........
hmm still no 3g connection after i ran you script and bootet then logging in to blur and adding my apn.........
any clues why?
Click to expand...
Click to collapse
Did you already try turn off remove battery and SIM wait at least 60 sec and put it back and turn on
Sent from my MB860 using XDA App
And by the way who is your service provider?
Sent from my MB860 using XDA App
....
i have a danish service provider called Telmore........ i bought my atrix on ebay thats why i have the att version, but 3g used to work.....
i am going to try the batteri and sim card thing now.....
apn settings for my provider:
name:telmore internet
apn:internet
apn type:default
):
would have been nice to know that the clean script deletet everything om my internal memory like pictures and such ):
i guess its too late now....
Good afternoon gentlemen
i know this isnt a development thread, but, its a real important, novel, question about radio. and there isnt one thread on radios in dev (on most forums u can download radois and flash them)
I'm not sure if this is possible with the photon. But if you haven't read yet, lots of GSM users (like myself) are having problems after updating to later OTA's and SBFs
these problems include signal loss, no connection to UMTS networks etc..
these are new problems, back in the day i had 0 problems with signal
This is what i know so far:
the 154 SBF flashes the n01.28.05s base band
however i just nanroided back to a 154 build (forgot when) and i saw this baseband:
N_01.28.07R
I know the 198 SBF uses the above too, and i had this flashed before i nandroided so that explains it i suppose (nandroid doesnt touch baseband)
user 'robinrisk' has the same issue, however his radio is : N_01.21.07R
no idea how he got that one, but oddly enough i remember that being the baseband i had 0 issues with
so i need to know if theres a way he can back it up, so i can flash it via sbf o cwm?
is it possible?
and if neone else has a baseband that reads different then that let me know, especially if someone still has a STOCK photon with that hasnt been updated once, that would be key
THanks guys
Sam
They're both rooted and kerneled using the 415.
The kernel from this thread
http://forum.xda-developers.com/showthread.php?t=1010102
Second from the bottom of his list.
Then the Frankenclean build 2.8.
Both phones are running that kernel and that rom, but only one can use barnacle wifi tether, the one running ED05 cannot tether.
Barnacle keeps error on (Wifi: Couldn ot set ad-hoc mode of eth0: invalid argument)
How can I flash ED05 to EA28 or is that the issue with barnacle at all? I've gone over all the settings and re-flashed Frankenclean AND the rom using CWM and no dice. The only software difference between the phones is the baseband version.
I've been searching for almost an hour now and haven't come up with a way to Odin from ED05 to EA28, nor have I found a solution to barnacle.
I've tried the 'old' tether app and it doesn't work either, it encounters the same error "cannot set ad-hoc network".
So why is it that both phones are running the same software one can tether and the other cannot? What could cause this?
I really need some help!
*update*
Ok, tried installing a backup\restore from the phone that CAN tether on the phone that can't. Same issue :can't set ad-hoc argument invalid:. So I've narrowed the issue down to the baseband version.
I need a way to go from ED05 to EA28, or can I use the ED09 to EA28 files without bricking the phone?
Yes This has all you need...
Basically you Odin your modem to DL09
Then using CWM flash from DL09 to your desired endpoint
http://forum.xda-developers.com/showthread.php?t=1097355&highlight=stoclk+modem
I have used this a number of times
This will get you to EA28
^ Thank you, I just wanted to reassurance that I COULD jump from ED05 to ED09 then to EA28 without having an issue from 05 to 09.