If i am rooted and have unlocked bootloader on 1.83 should i use this http://forum.xda-developers.com/showthread.php?t=1182526 to flash for Gb? And if i can will this version enable me to downgrade usind RSD lite in the future?
you can use rsd all you want as long as you dont update with the official OTA update if you do you will be screwed and prob hard brick your phone, im pretty sure i am correct on this.
savier420 said:
you can use rsd all you want as long as you dont update with the official OTA update if you do you will be screwed and prob hard brick your phone, im pretty sure i am correct on this.
Click to expand...
Click to collapse
You make no sense and you are 100% incorrect.
Sent from my MB860 using XDA App
BravoMotorola said:
You make no sense and you are 100% incorrect.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
you are very helpful... smh
savier420 said:
you can use rsd all you want as long as you dont update with the official OTA update if you do you will be screwed and prob hard brick your phone, im pretty sure i am correct on this.
Click to expand...
Click to collapse
ok PLEASE help me. i was on leaked HKTW 2.3.4. I then went to cherryblur. which i guess is 2.3.4. i tried using the same sbf that the op linked us to. it put me in a bootloop. so is it safe that i downgrade to 1.8.3 and try to upgrade the way the op is to 2.3.4?
BravoMotorola said:
You make no sense and you are 100% incorrect.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
hahahaahahahahah made me laugh but was a little harsh and not helpful if u use this you CAN NOT downgrade through sbf use a custom rom or a rom that says it will allow you because if you use that you will mess up your phone also its not adviced to rsd back in forth since that really isnt made to be used for public try to use it as little as possible
INSM Sin said:
ok PLEASE help me. i was on leaked HKTW 2.3.4. I then went to cherryblur. which i guess is 2.3.4. i tried using the same sbf that the op linked us to. it put me in a bootloop. so is it safe that i downgrade to 1.8.3 and try to upgrade the way the op is to 2.3.4?
Click to expand...
Click to collapse
DO not downgrade you are already on an official 2.3.4 which will cause u to hard brick find the pudding or fruitcake thread in the dev section for instructions on how to fix it without ruining your devices
i was able to get it to 2.3.4 but i now need to know how to root
if you have installed CWM, try this
http://forum.xda-developers.com/showthread.php?t=1159572
Related
I've been away on holiday for a short time and boy....development has sure moved fast
quick few questions:
1. I'm on gingerblur, do I need to SBF back to stock to flash new custom ROMs?
2. Regarding above question....I need to unlock the bootloader first using the unlocking package on briefmobile or the pudding thread if I can find it right?
3. Which Gingerbread based ROM seems to run the most bug free/useable as a daily driver right now?
thanks!
I like KennethPenn's ROM. Running smoothly, so far. I haven't had it on long enough to make a definitive comment, but it is stable and fast.
carlharsch said:
I like KennethPenn's ROM. Running smoothly, so far. I haven't had it on long enough to make a definitive comment, but it is stable and fast.
Click to expand...
Click to collapse
I have had it since he released and I think its a great build quick and seems like moto has fixed some things that needed to be fixed.I like the gui.
Sent from my MB860 using XDA Premium App
Xenocyde said:
I have had it since he released and I think its a great build quick and seems like moto has fixed some things that needed to be fixed.I like the gui.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Is it already rooted if I may ask?
Sent from my semi de-blurred atrix using telepathy and Tapatalk
droid_does said:
Is it already rooted if I may ask?
Sent from my semi de-blurred atrix using telepathy and Tapatalk
Click to expand...
Click to collapse
its not rooted, you are going to have to flash back to 1.8.3, make sure you use the full build and not just the OTA update, unlock the bootloader, flash 2.3.4 then root. make sure you flash this build from ken theres reports of hard bricking if you use other sources.
neotekz said:
its not rooted, you are going to have to flash back to 1.8.3, make sure you use the full build and not just the OTA update, unlock the bootloader, flash 2.3.4 then root. make sure you flash this build from ken theres reports of hard bricking if you use other sources.
Click to expand...
Click to collapse
so first I SBF back to 1.8.3
root
unlock BL
flash 2.3.4 (which one? HKTW? or the one linked above?)
The new build is fully rooted thanks to kenneth. Everything seems to work.
Sent from my MB860 using XDA Premium App
droid_does said:
so first I SBF back to 1.8.3
root
unlock BL
flash 2.3.4 (which one? HKTW? or the one linked above?)
Click to expand...
Click to collapse
Flash the one in the link above by Kennethpenn. The HKTW one will give you battery life issues and a non-working fingerprint scanner, while other sources could result in a hard brick if you ever want to downgrade. You'll need the unlocked bootloader version of CWM to flash it, not the existing charge mode one. You dont need root to install it, and I believe that particular version of 2.3.4 is already rooted. So,
unlock BL
flash cwm
flash Kennethpenn's 2.3.4.
Im waiting for tho official motorola ota of gb...I've been lookin around and some treads say we shouldn't flash sbf or ota due to possible hard brick can someone clarify?
Sent from my MB860 using XDA App
toddran1 said:
Im waiting for tho official motorola ota of gb...I've been lookin around and some treads say we shouldn't flash sbf or ota due to possible hard brick can someone clarify?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
It's ironic because the official motorola OTA is the one that is giving everyone trouble. That is this one.
If you want to get gingerbread safely you will first need to install 2.3.4 with an unlocked bootloader, follow these directions:
http://forum.xda-developers.com/showthread.php?t=1142674
You can now flash roms if you performed that successfully, I would recommend this one since it is safe and great:
http://forum.xda-developers.com/showthread.php?t=1159385
Cheers, pm me if you need help
The stock ota is safe if your not unlocked or anything.
But the stock ota motor has put something to prevent your from going to older sbf. The version kenneth has made is perfect. And still gives u stock rom with extras
Sent from my MB860 using XDA Premium App
O ok thanks so sounds like kens version is the best way to go
Sent from my MB860 using XDA App
I have a related question:
Is the GingerBread 2.3.4 Motorola update out via OTA? I mean, "officially", so it can be installed on a stock unrooted unlocked Atrix. I read the update will be launch end of July.
Thanks in advance.
toddran1 said:
Im waiting for tho official motorola ota of gb...I've been lookin around and some treads say we shouldn't flash sbf or ota due to possible hard brick can someone clarify?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
You can brick your device if you are not on 1.83 before you flash gingerbread on your atrix....at least that is what I understand from it. You can't go from 1.26 to gingerbread, you have to go from 1.83 right to gingerbread. And you have to unlock your bootloader otherwise you might screw something up.
PS. Please check your grammar man. Unless you're from like France, take the time and type things the right way.
Infected24 said:
I have a related question:
Is the GingerBread 2.3.4 Motorola update out via OTA? I mean, "officially", so it can be installed on a stock unrooted unlocked Atrix. I read the update will be launch end of July.
Thanks in advance.
Click to expand...
Click to collapse
nope! its out in an SBF file I believe. As of right now, you will have to root your device and install 1.83 before you can flash gingerbread on it...I haven't installed a rom on here in like a months so I've been outta the loop I guess
oshizzle1991 said:
You can brick your device if you are not on 1.83 before you flash gingerbread on your atrix....at least that is what I understand from it. You can't go from 1.26 to gingerbread, you have to go from 1.83 right to gingerbread. And you have to unlock your bootloader otherwise you might screw something up.
PS. Please check your grammar man. Unless you're from like France, take the time and type things the right way.
Click to expand...
Click to collapse
It wont load at all with 1.2.6 but that's not what is causing bricks going from 2.3.4 to any older sbf with the stock ota is causing the bricks. Kenneth build you can go back,and is safe to use.
Infected24 said:
I have a related question:
Is the GingerBread 2.3.4 Motorola update out via OTA? I mean, "officially", so it can be installed on a stock unrooted unlocked Atrix. I read the update will be launch end of July.
Thanks in advance.
Click to expand...
Click to collapse
No, its not out yet keep checking you updates wont be too much longer
Sent from my MB860 using XDA Premium App
Infected24 said:
I have a related question:
Is the GingerBread 2.3.4 Motorola update out via OTA? I mean, "officially", so it can be installed on a stock unrooted unlocked Atrix. I read the update will be launch end of July.
Click to expand...
Click to collapse
Motorola has given no date for GB release. End of July is only speculation.
Beamed from WinBorg 4G via XDA Premium
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
At least if you want an unlock bootloader the only option so far for an AT&T unit is flashing pudding no matter what version you have (1.83 or 2.3.4/4.5.91)
cwburns32 said:
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
I'd use this SBF to flash GB:
http://forum.xda-developers.com/showthread.php?t=1182526
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
cwburns32 said:
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
Click to expand...
Click to collapse
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
mpalatsi said:
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
Click to expand...
Click to collapse
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
cwburns32 said:
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
Click to expand...
Click to collapse
Love it. It's clean, quick, and reliable.
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
LivingChampion said:
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
Click to expand...
Click to collapse
That's right, it will unlock your bootloader if you were on 1.8.3.
Make sure you have a full battery before flashing!
Charged that baby all night, today was the day I got Gingerbread. I just wanted to make sure everything is in order before flashing.
Just finished installing it, holy crap. Every app is saved. It seems I'm still rooting too. How do I tell if I'm unlocked?
edit: Ah, nevermind I'm not rooted. Guess thats something I'm going to have to do now.
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
The Pudding thread talks about if 1.8.3 is flashed after pudding then the "reboot" text will no longer appear. However, be very careful with this because many have bricked their phone by flashing 1.8.3 over a GB build. See the sticky threads in the developer forum.
czausmouse said:
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
deziguy420 said:
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
Click to expand...
Click to collapse
Umm no great idea for the people that are not sure how got running GB.... is better always to be on the safe line
Sent from my MB860 using XDA App
czausmouse said:
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
Click to expand...
Click to collapse
if you have never updated to GB OTA then use the link that i gave you...and flash 1.2.6..
I have flashed 1.2.6 then rooted, unlocked bootloader, flashed CWM..flashed three different GB ROMs...didn't like it..then I flashed 1.2.6 again using RSD..as long as you have never upgraded to GB via OTA..i think you should be fine...
any solution for those that are running GB OTA?
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
I'v searched around quite a bit, but still couldnt find the answer. I did originaly do the GB OTA. I am currently unlocked running CM7 Beta. My stupid LED flash burnt out again (SECOND FREAKING PHONE) so now i need to take it back within my 30 day's.I would just fix it my self but their are no parts out their for the flash. Im not worried about them going throught the phone logs to see if im unlocked. I just need to hide the text long enough to get past their cursory inspection. From what i have read, it is safe to to do 4.5.91 SBF flash just cannot go lower than that. Just want to make 100% sure before i go along this path.
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
Flashing the 4.5.91 SBF is as safe as anything (with normal flashing caveats) and will remove the "unlocked" text from the BL. However, there is a register that can be queried that will show that the bootloader has been unlocked.
If you flash the 1.8.3 SBF you will brick yerself.
You can't "relock" the bootloader.
Source: personal experience (I did the 4.5.91 flash yesterday)
It did work, thank you guys so much.
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
What worked? Flashing with a GB SBF?
which SBF did you use?
Did you get rid of "unlocked" text?
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
anangphatak said:
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
Click to expand...
Click to collapse
you can flash a GINGERBREAD SBF file with RSD lite, but it will revert you back to complete stock.
you will lose the ability to install a custom recovery, and lose the ability to install custom ROMs.
My info-
on ATT
Unlocked
Rooted
4.5.91
Android Version 2.3.4
Alien #4
ROM Manager v5.0.0.7
Should I install the "critical update" from Motorola? I just started to see the notices.
Will it cause issues with my current setup?
Thanks,
Sean
MagSea said:
My info-
on ATT
Unlocked
Rooted
4.5.91
Android Version 2.3.4
Alien #4
ROM Manager v5.0.0.7
Should I install the "critical update" from Motorola? I just started to see the notices.
Will it cause issues with my current setup?
Thanks,
Sean
Click to expand...
Click to collapse
wat
There's an update?
Since you're on Alien/rooted/unlocked BL I would recommend against taking any OTA update. It would most likely fail anyway.
EDIT- I just noticed you're on 4.5.91, you must be seeing the notifications for the 4.5.141 update. You had me all excited that there was some other update out.
Thanks Stewart- poor reading comprehension on my part.
That answers it.
No!
S Do not update, there are multiple posts of people bricking their phone attempting to update, if you continually get requests to update you can freeze updater with titanium backup. If you want to update with newer firmware I would suggest taking a look at the many newer gb roms or even a move to cm7 if you really want something a bit different, as far as I am aware there aren't going to be any more updates to Alien.
I'm on a stock 4.5.141 myself, with a few enhancements. I had an unlocked bootloader on 4.5.91, updated using the 4.5.141 SBF, and could re-unlock the bootloader. Then CWM and start flashing zips (like root).
I'm still waiting with bated breath for an ICS leak.
MagSea said:
My info-
on ATT
Unlocked
Rooted
4.5.91
Android Version 2.3.4
Alien #4
ROM Manager v5.0.0.7
Should I install the "critical update" from Motorola? I just started to see the notices.
Will it cause issues with my current setup?
Thanks,
Sean
Click to expand...
Click to collapse
I would flash your current version sbf through rsd lite then OTA update your phone then unlock it again.
Sent from my MB860 on CM7
Soldier-2Point0 said:
I would flash your current version sbf through rsd lite then OTA update your phone then unlock it again.
Sent from my MB860 on CM7
Click to expand...
Click to collapse
Dont do this. You're unlocked, treat RSD as if it doesnt exist. If I were you, I'd try to find either a .141 fruitcake (CWM flashable versions of RSD files) or switch to a .141 based rom if you want to stick with blur.
Jotokun said:
Dont do this. You're unlocked, treat RSD as if it doesnt exist. If I were you, I'd try to find either a .141 fruitcake (CWM flashable versions of RSD files) or switch to a .141 based rom if you want to stick with blur.
Click to expand...
Click to collapse
I have done what I said I would and it did not brick my device. There is a risk if you flash the wrong sbf or downgrade.
Soldier-2Point0 said:
I have done what I said I would and it did not brick my device. There is a risk if you flash the wrong sbf or downgrade.
Click to expand...
Click to collapse
Most don't reccomend this however as too many possible things can go wrong. Also is alot more work to fix if something goes wrong. A flashable fruitcake or rom is more simple to do in the first place and if something does go wrong is easier to fix. Also the roms available kick butt over the stock rom.
kooldadof4 said:
... Also the roms available kick butt over the stock rom.
Click to expand...
Click to collapse
Yeah, well, you know, that's just, like, your opinion, man.