what would be the correct process for this procedure? I'd prefer to do motorola's official release, but I really just don't know what the method I should follow is.
Bump -____-
Flash 2.3.4 + pudding from the2dcour
logswithmoss said:
Bump -____-
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
mramirezusa said:
Flash 2.3.4 + pudding from the2dcour
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which should I flash, the Dev section is a swamp of wtf to me right now, and should I flash it with RSD Lite?
the Dev section is a swamp of wtf to me right now
lol... well said... lol
I did this last night myself.
HOW TO FLASH A SBF:
The Motorola Atrix 4G SBF Thread. This is your fall back, you flash this if you screwed yourself, wanna go back to stock, or you just wanna try it out. Make sure you pick the right sbf file too, don’t go flashing a Latin America sbf on a US AT&T Atrix. Currently there are 3 U.S. Motorola sbf files you should be concerned about: 1.2.6, 1.5.7 and 1.8.3 (w/ 2.3.3 coming soon!)
Motorola Atrix Firmware Super Thread:
http://forum.xda-developers.com/show....php?t=1125944
Here are instructions for flashing a sbf file to your device. These particular instructions were for 1.2.6 sbf, but also apply to all other .sbf files. Ready carefully & make sure you have all the prerequisite files, programs, drivers, etc:
http://forum.xda-developers.com/showthread.php?t=991072
Click to expand...
Click to collapse
Texasyoungin said:
I did this last night myself.
Click to expand...
Click to collapse
Were you on gingerblur? And which one did you flash? I want unlocked Gingerbread
Since there was a lack of help, I put on my big boy pants and tried it, and it worked perfectly.
Was on Gingerblur 4.5, i unlocked with kennethpenn's method
http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
and then flashed this sbf using rsd lite:
http://forum.xda-developers.com/showthread.php?t=1182526
I was in a similar situation.... I flashed straight from locked bootloader stock 1.83 to gingerbread + pudding sbf. I have not unlocked bootloader from there because I have no reason too.
So for anyone with a similar question, you DO NOT need to unlock your bootloader before flashing the gingerbread + pudding SBF! Just flash that and you get gingerbread, plus the ability to unlock in the future.
Related
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
At least if you want an unlock bootloader the only option so far for an AT&T unit is flashing pudding no matter what version you have (1.83 or 2.3.4/4.5.91)
cwburns32 said:
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
I'd use this SBF to flash GB:
http://forum.xda-developers.com/showthread.php?t=1182526
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
cwburns32 said:
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
Click to expand...
Click to collapse
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
mpalatsi said:
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
Click to expand...
Click to collapse
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
cwburns32 said:
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
Click to expand...
Click to collapse
Love it. It's clean, quick, and reliable.
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
LivingChampion said:
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
Click to expand...
Click to collapse
That's right, it will unlock your bootloader if you were on 1.8.3.
Make sure you have a full battery before flashing!
Charged that baby all night, today was the day I got Gingerbread. I just wanted to make sure everything is in order before flashing.
Just finished installing it, holy crap. Every app is saved. It seems I'm still rooting too. How do I tell if I'm unlocked?
edit: Ah, nevermind I'm not rooted. Guess thats something I'm going to have to do now.
H,
I want to use my MacBook Pro to update my atria to gingerbread. My phone is already rooted with 1.8.3. What version of gingerbread do i need and how do I do it? I do not want to hard brick my phone.
Thanks
12jewels said:
H,
I want to use my MacBook Pro to update my atria to gingerbread. My phone is already rooted with 1.8.3. What version of gingerbread do i need and how do I do it? I do not want to hard brick my phone.
Thanks
Click to expand...
Click to collapse
I suggest you take your pick of modified ROMs our devs have developed
Ninja
CherryBlur
RedPill
Kenn's Rom with Extras
Couple other news ones have popped up recently, but i'd give them some time.
If you want stock, I suggest flashing the 4.5.91 SBF WITH pudding and root already built in.
I'm trying to use sbf_flash to flash to gingerbread, but it is failing with checksum errors. any suggestions?
12jewels said:
I'm trying to use sbf_flash to flash to gingerbread, but it is failing with checksum errors. any suggestions?
Click to expand...
Click to collapse
Not familiar with sbf_flash, but which SBF gingerbread are you trying to flash?
I am trying to flash pudding. Does the phone need to be unlocked first? How can I tell if it is unlocked?
12jewels said:
I am trying to flash pudding. Does the phone need to be unlocked first? How can I tell if it is unlocked?
Click to expand...
Click to collapse
Pudding will unlock your phone if you read through the 1st post and follow instructions.
Ok, it took a while, but i get it now.
Thanks
Hey people I really need someone here to just point me in the right direction.I've read up but its pretty confusin because noone talks about the official OTA much.
I upgraded from .83 to the 2.3.4 OTA
My bootloader is unlocked too EDIt it's Locked
I have root though.
I've read that if I went straight to OTA I'm screwed as far as using RSD
CAn I use RSD to flash a 2.3.4 ROM or stock sbf?
Will it brick my phone?
I want to just flash something other than this OTA which doesnt let me do really anything can someone at least post a link that can help me with how to flash over the OTA? please any help will be appreciated!!! thanks
sk8trix said:
Hey people I really need someone here to just point me in the right direction.I've read up but its pretty confusin because noone talks about the official OTA much.
I upgraded from .83 to the 2.3.4 OTA
My bootloader is unlocked too
I have root though.
I've read that if I went straight to OTA I'm screwed as far as using RSD
CAn I use RSD to flash a 2.3.4 ROM or stock sbf?
Will it brick my phone?
I want to just flash something other than this OTA which doesnt let me do really anything can someone at least post a link that can help me with how to flash over the OTA? please any help will be appreciated!!! thanks
Click to expand...
Click to collapse
Most likely yes. Since you already have the pudding bootloader, it'll be fine. But not every rom works the same, so you gonna take extra care especially when you want to downgrade to lower versions.
I have the at&t OTA that was released a few days ago so you're saying I can use RSD to flash the 2.3.4 leak build?
EDIt my bootloader is Locked im sorry root is the onlything I have I apologize
DeXtmL said:
Most likely yes. Since you already have the pudding bootloader, it'll be fine. But not every rom works the same, so you gonna take extra care especially when you want to downgrade to lower versions.
Click to expand...
Click to collapse
Well isn't what unlocked bootloaders and recovery are for? Should be able to flash your 2.3.4 alien rom and boot/shutdown and flash the faux kernel. That's if your AT&T.
Besides I hear RSD after bootloader and it's update is a big no no. Especially since many bricks posts "hhhhhheeeeelllllpppp meeee im bricked!?"
Stock OTA 2.3.4/4.5.91 AT&T with just ROOT right NO bootloader UNLOCK?
You just can RSD same 2.3.4/4.5.91 sbf so far YOU CAN NOT RSD ANY MOTO DOWNGRADE FOR EXAMPLE 1.26 1.57 1.83
If you decide to unlock your bootloader you can flash by CWM or moto-fastboot almost anything from dev for ATRIX
so the deal here is to unlock the bootloader
sk8trix said:
I have the at&t OTA that was released a few days ago so you're saying I can use RSD to flash the 2.3.4 leak build?
EDIt my bootloader is Locked im sorry root is the onlything I have I apologize
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
shuld I follow this guide?
http://forums.androidcentral.com/atrix-rooting-roms-hacks/105996-guide-ulbl-root-stock-atrix-ota-gb.html
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
The Pudding thread talks about if 1.8.3 is flashed after pudding then the "reboot" text will no longer appear. However, be very careful with this because many have bricked their phone by flashing 1.8.3 over a GB build. See the sticky threads in the developer forum.
czausmouse said:
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
deziguy420 said:
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
Click to expand...
Click to collapse
Umm no great idea for the people that are not sure how got running GB.... is better always to be on the safe line
Sent from my MB860 using XDA App
czausmouse said:
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
Click to expand...
Click to collapse
if you have never updated to GB OTA then use the link that i gave you...and flash 1.2.6..
I have flashed 1.2.6 then rooted, unlocked bootloader, flashed CWM..flashed three different GB ROMs...didn't like it..then I flashed 1.2.6 again using RSD..as long as you have never upgraded to GB via OTA..i think you should be fine...
any solution for those that are running GB OTA?
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
I'v searched around quite a bit, but still couldnt find the answer. I did originaly do the GB OTA. I am currently unlocked running CM7 Beta. My stupid LED flash burnt out again (SECOND FREAKING PHONE) so now i need to take it back within my 30 day's.I would just fix it my self but their are no parts out their for the flash. Im not worried about them going throught the phone logs to see if im unlocked. I just need to hide the text long enough to get past their cursory inspection. From what i have read, it is safe to to do 4.5.91 SBF flash just cannot go lower than that. Just want to make 100% sure before i go along this path.
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
Flashing the 4.5.91 SBF is as safe as anything (with normal flashing caveats) and will remove the "unlocked" text from the BL. However, there is a register that can be queried that will show that the bootloader has been unlocked.
If you flash the 1.8.3 SBF you will brick yerself.
You can't "relock" the bootloader.
Source: personal experience (I did the 4.5.91 flash yesterday)
It did work, thank you guys so much.
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
What worked? Flashing with a GB SBF?
which SBF did you use?
Did you get rid of "unlocked" text?
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
anangphatak said:
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
Click to expand...
Click to collapse
you can flash a GINGERBREAD SBF file with RSD lite, but it will revert you back to complete stock.
you will lose the ability to install a custom recovery, and lose the ability to install custom ROMs.
if i flash a stock 2.34.91 sbf? i know cant relock it but does flashing stock 2.34 sbf take away the unlocked at bootup? and is it safe to use the stock 2.34 sbf? thanks
leo5111 said:
if i flash a stock 2.34.91 sbf? i know cant relock it but does flashing stock 2.34 sbf take away the unlocked at bootup? and is it safe to use the stock 2.34 sbf? thanks
Click to expand...
Click to collapse
please let me know if you find any info on this, i have to take mine back before the 30 day's because of the stupid duel led flash issue (second freaking time). this time it was fine for a bit so i decided to unlock. Now i need to take it back and hopefully hide the unlock part.
kyleallen5000 said:
please let me know if you find any info on this, i have to take mine back before the 30 day's because of the stupid duel led flash issue (second freaking time). this time it was fine for a bit so i decided to unlock. Now i need to take it back and hopefully hide the unlock part.
Click to expand...
Click to collapse
I posted in another thread, but I'll put it here for others, too.
Flashing the 4.5.91 SBF will remove the "unlocked" text. It doesn't re-lock the BL.
I know this because I did it.
Which sbf are you using and where did you get it?
kutluch said:
Which sbf are you using and where did you get it?
Click to expand...
Click to collapse
The stock SBF. From the firmwares thread in the Atrix Android Development Forum.
Sent from my MB860 using XDA App
stewartsoda said:
The stock SBF. From the firmwares thread in the Atrix Android Development Forum.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
did the same thing and yes it removes the unlock
stewartsoda said:
I posted in another thread, but I'll put it here for others, too.
Flashing the 4.5.91 SBF will remove the "unlocked" text. It doesn't re-lock the BL.
I know this because I did it.
Click to expand...
Click to collapse
Thanks, this worked for, I was running Fruitcakes 2.3.6, went back to 2.3.4 fruitcake and flashed 4.5.91 SBF. Also had ROMRacer's CWR installed.