,My phone is dead now,because i flashed custom rom with the wrong custom kernel then after that, system got error, the SD card cant be mounted, SIM card not functioning, i cant even enter xrec mode,it resets itself automatically after few minutes, the worst part is that the USB port is no more recognized by the computer, charging become slower than usually....
i got my phone repaired twice, the USB port has been changed,but its still cant be detected, SE authorized repair center told me that the mainboard need to be replaced, and the price of the MB is almost the price of a new X10, what can i do without changing the MB? i love my X10。。。。
Anybody can help me?
This has been covered before. Search before posting in the future.
As for your problem, search for "Flashtool", and use it to repair your phone. Alternatively, use SEUS or PC Companion. If they don't work, then you might be in bigger trouble than I originally thought.
i cant use flashtool and SEUS bec. of the broken usb port. and its impossible to be repaired, any alternative way to repair it?
If xRecovery and Flashtool/SEUS doesn't work, and your USB port is definitely broken, then a new motherboard may be your only option unfortunately.
I have the same problem I think I have to sell my Xperia in parts.
Related
Tried to flash my phone from 2.1 back to 1.6 and now it wont turn on... I can't get it into flash mode because I have a dodgy frickin' USB port on my phone...
I take the battery out, re insert it, press power button and it vibrates, flashes the led and then nothing.
Please help
Thanks in advance
Z3X
Just reflash your phone. There are plenty of resources in this forum.
Try changing your USB cable first.
And I'm just wondering why you'd want to downgrade from 2.1 to 1.6.
If you're sure there's a problem with the USB connector on the phone then your best bet is to take it to your local SE support.
D3sRtH4mmR said:
Just reflash your phone. There are plenty of resources in this forum.
Try changing your USB cable first.
And I'm just wondering why you'd want to downgrade from 2.1 to 1.6.
If you're sure there's a problem with the USB connector on the phone then your best bet is to take it to your local SE support.
Click to expand...
Click to collapse
I cant get into flash mode! I was downgrading so i could take it back and get the USB Port repaired
In that case take it to Sony Ericsson's repair center as it is in its current state if you're certain the USB port is preventing the connection to the PC.
Friends I have a big problem, my xperia X10i suffered damage at
I can not connect USB to my computer, the phone has android
1.6 and want to upgrade at least to 2.1 but do not know where to find a
generic rom to do the update without connecting the phone to USB
computer.
I'm sorry to hear.
But you'll need a functional USB port and USB cable to update your phone software, so I suggest that you contact your retailer to leave it for service.
BR
Johan
See if you can resold the micro USB pin connector.. or take the phone to an official center.. i guess that is the only way. unless that you make a root and installing the Xrecovery flash the rom from there, you can use a custom rom too
The problem is how to load the ROM with everything inside the micro SD card
Can you charge your battery with USB cable?
If so, you should be able to connect your X10 to your PC via USB.
Otherwise you should return your X10 to the Sony Repair Center.
If you want to load a rom you need a rooted X10 and "xrecovery"apk.
To make a root without Flashtool and USB cable, i think you can do with "z4root"apk.
You can also use "rom manager"apk to load a rom in SD card.
If you are on the stock 1.6, then I'll recommend that you take it to a service center and check, since it's probably a hardware problem (common in X10).
Hello, my ace I can not recognized by usb more.
I've tried tutte.la broken door and there is a way to put the original firmware to be able to send via SD broadcast?
translated with google
i guess it you mean it used to work but now it doesnt?
Try (re)installing KIES to get the drivers again.
check the cable, try formating SD card :S
It 'a hardware problem the phone
I did all the tests. I just wanted to be able to put the original firmware to be able to repair under warranty
Well, the day before it occurred to me that I'd like to install a custom ROM, therefore I went on to plug my phone into my PC and for my surprise, the phone didn't pop that MTP warning and the PC did not recognize it.
So I went around and changed USB ports, cables and PCs, same thing.
Decided to try Mass Storage mode, when I press the START button and put in the cable it goes back into the main start screen.
So I went on and tried that *#7284# trick people used since apparently 4.0.3 bugged some crap stuff in the phone, no success either.
Strangely enough I can connect the "pendrive dongle" and it will map pendrives.
Well, I don't have my phone rooted or with SU so that means CWM from app store won't be able to install the recovery module, and I can't install... you get the picture.
Nor ODIN nor HEIMDALL will recognize my phone in recovery mode, wich suggests that the data lanes on my phone went somewhat dead.
Finally, any cable I plug in the phone says it's charging my device, wich leads me to belive that the usb port is dead.
Anyone had this issue?
Anyone can confirm me I'll have to take it to Sammy's assistance?
Sure looks like the USB is dead/dying.
Sent from my digital submersible hovercraft.
So I got one more question, can I root and/or install CWM so I do not stay dependent of the USB to update it or I do need to plug in the USB to install CWM through ODIN?
Several problems
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Angelkom said:
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Click to expand...
Click to collapse
Warranty has already expired.
Kies was installed on the PC, ODIN gives no info @ COM port.
I wanted to connect it just to root and install CWM so I can swap ROMs as much as I want.
Thing is, the customer service wants 1 week to assess the issue and probably 100USD to fix it.
So for some god-knows-why reason my phone decided to conect to MTP while charging, I quickly restarted it into revocery mode and flashed CF_Root w/ CWM5.5.
Successful!
Bloody USB thingy!
Now I can start messing around with the phone.
Anyone has a n00blet guide on ROMs?
I was thinking about moving to CM 10.1, one of those nightlies running 4.2.2.
This is the one I used >> CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5
Can anyone suggest actions?
For future you should change your USB-Port. Here we get one for about 15 € (about 20 $) in ebay. It's very simple to change and then you have a full working phone again. Just watch the Videos on Youtube and everyone can do this. Hope I could help!
I bricked my phone, I was on Oreo B360. I decided to use DC-Unlocker service and paid 19€. When flashing my phone with DC Phœnix, my computer turned off(because it is old and have some battery problems). No my phone don't turn on and isn't detected by the computer. I have no access to fastboot.
It is HardBricked.
Does anyone has a solution?
Thank you in advance!
Very old thread, haven't seen it but will bother to reply. I had same situation with my other manufacturer's phone. I flashed and accidentally removed USB cable and then couldn't revive the phone. Your motherboard may be corrupted now and only way to get it back is to use test point or replace motherboard