I am trying to view the files on my phone on my PC at work. I am unable to install Kies. I have tried the USB Utilities section but it does not work. On my HTC when you plug the USB in it came up with a menu asking you what you wanted to do, is there sommething like this on Samsung phones?
FYI, this is my first Samsung phone.
Enable USB Debugging mode...not sure if it still needs the drivers for that though, I think you still might.
try pull down the top bar and select the usb message, then click on connect storage from pc
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
that's strange.. i got sgs2 delivered to my work today, so yeah I have no related software or drivers installed, plugged in and entered usb storage successfully.
Btw my PC is still on XP and i cancelled all the driver request that poped up
vinokirk said:
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
Click to expand...
Click to collapse
No drivers needed AFAIK for mass storage... Can you check device manager and see if it shows.
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Ok it's very simple you go settings then wireless and networks,usb utilities,click turn on usb storage then connect cable to pc.
i go into settings and choose usb debugging this way it stops the kies pop up each time
Sent from my GT-I9100 using XDA App
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
dartveiga said:
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
Click to expand...
Click to collapse
tried this to no avail. After I connect cable at step 5, no little green guy, no option to choose? Any ideas?
Is it a proper data cable?
Sent from my GT-I9100 using XDA App
wickedsaint said:
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Click to expand...
Click to collapse
The external storage is actually a sub directory on the phone storage, it's called external_sd_card iirc (if I remember correctly)
Welcome to the world of Samsung
UMS not mounting - W7
Hello, I have the same problem.
I have done the following already and it doesn't work:
·Updated Kies in hope to get the drivers for my phone.
·Looked for support in official Samsung website, thus downloading a program to install the drivers for my phone.
·Update through Windows update (failed in windows)
Also when i enable USB debugging mode I am forced to disable it just before turning on the USB Mass Storage. Doesn't mount and doesn't recognise phone (can't find in Device Manager).
I suppose I could live using the MTP way but still, like voiced by other people I would also like to have USB Mass Storage mode.
Thank you.
Solution:
I think I have found the solution, I have not tried this yet and supposedly you need CF-root kernel (so Siyah and other kernels might not work). Here is the link:
CLICK HERE
Like the author of that thread has said, I am not responsible if your phone gets bricked, stolen, eaten, drunk, chewed by your dog or anything of the sorts either directly or indirectly! USE AT YOUR OWN RISK!
When I first got my phone and plugged it into my computer, I had to use the pulldown menu and press a "connect to USB" button for my phone to be mounted in Windows so I could access the phone storage. Once I was done, I had to unmount the phone by using the Windows safely remove hardware function.
Now when I connect my phone it simply tries to connect to Kies and although my phone does appear within Windows and I can access the files, I don't have the connect to USB feature and when I'm done, there's nothing to unmount.
What happened? In both situations, I don't even have Kies installed, so the connect to USB option was obviously what I wanted.
Enable USB debugging to mount to usb the old fashion way. Note that if you have a sdcard in the phone when you do this, both the phone's internal memory and your sdcard will show up as two separate drives on your computer.
Sent from my non-Apple device via XDA App
Thanks. Makes sense now... when rooting it I obviously had USB debugging enabled... guess I disabled it and didn't put two and two together.
When I try to connect it to the computer over USB it shows up as a "Portable Device" in windows 7 and I am unable to use file recovery software on the computer because of this.
Is it possible to mount the internal memory over USB Mass Storage so I can try recovering the files with a windows program?
Any suggestions would be much appreciated.
Are you using settings to set to USB mass storage mode ?????
Have you actually installed the Samsung USB drivers ??/
jje
recover them without a computer HERE
Undelete for Root Users
or
Hexamob Recovery Lite *root*
JJEgan said:
Are you using settings to set to USB mass storage mode ?????
Have you actually installed the Samsung USB drivers ??/
jje
Click to expand...
Click to collapse
yes i can see all the file..but when i deleted all my photos by mistake i am try to recover them through recovering soft the problem it i try several recovery softwares they seems dont detect "portable device" so i was looking for something to turn my phone as Mass storage ????
or if you dont have internet on your phone use these
Help please.
My display bricked today after phone falling me down. I don't see anything on my phone display now. I have installed a rom with standard USB mass storage, but can't anymore see and touch the option to activate internal USB storage.
Is there any possibility to read internal storage otherwise with connection from PC ??
thanks for any tip
spirotech
Go to recovery mode. Wait a few seconds to make sure you are already using recovery mode.
Press volume up 4 times. It will lead you to mounts and storage.
Press volume up 2 times. 'mount USB storage'
Well, I'm not too sure about the second step because I'm not currently on siyah.
It don't works. Any other idea ??
adb may work if you had it turned on. If not, it may work from recovery.
a mhl cable would also work to make a tv your screen but then you will likely find that if the screen is broken that touch input is not working.
1. Download and instal program "Android Commander" onto a Windows PC.
2. Boot into recovery
3. Connect to PC with USB & allow drivers to instal
4. Run Android Commander and view / modify / copy all files emmc, sdcard etc to PC directory.
Sent from my GT-P6810 using XDA Premium HD app
Hello guys,
This is my first post and this place is still new to me so bare with me.
I have a Samsung Galaxy S2 Plus. Rooted. Android 4.2.2
I am looking to recover some deleted files in the internal storage however whenever I plug in the USB to the PC, programs like "Paragon Backup and Recovery" and "Remo Recover for Android" cannot detect the device.
USB Debugging is checked.
I have been searching but no luck. Maybe someone here can help.
Thanks!
try kies and wandojia to update the lastest driver, it would help
LucciMane said:
Hello guys,
This is my first post and this place is still new to me so bare with me.
I have a Samsung Galaxy S2 Plus. Rooted. Android 4.2.2
I am looking to recover some deleted files in the internal storage however whenever I plug in the USB to the PC, programs like "Paragon Backup and Recovery" and "Remo Recover for Android" cannot detect the device.
USB Debugging is checked.
I have been searching but no luck. Maybe someone here can help.
Thanks!
Click to expand...
Click to collapse
sometimes change to another port would help
and also, you could switch mode (MTP, Camera, Mass Storage) and sometimes with debugging.
Eventually your PC would recognize and thus you could access to the internal data!
TRY harder man
GodShot said:
sometimes change to another port would help
and also, you could switch mode (MTP, Camera, Mass Storage) and sometimes with debugging.
Eventually your PC would recognize and thus you could access to the internal data!
TRY harder man
Click to expand...
Click to collapse
I tried all that. There is no option for Mass Storage. Otherwise I wouldn't be here lol.
Are you sure you have installed every drivers?
LucciMane said:
I tried all that. There is no option for Mass Storage. Otherwise I wouldn't be here lol.
Click to expand...
Click to collapse
Make sure every driver is properly installed?
You could use the Chinese synchronizing software "Wandojia". It could auto-detect and install the driver for you!
Or sometimes the option is hid under the category of more settings- wireless and networks- USB utilities
Or in storage, but you have to press menu to select the option
Just keep trying, good luck !