i change the update PDA and PIT files By Odin application but the mobile and Odin application is hung after 30 min i disconnect the usb cable but the mobile not work never never ,,, and i can not access to download mode
please help me how i can access to download mode for change PDA and PIT files
please help me pleaseeeeee
Why would you touch pit files in the first place???
Sent from my GT-I9100
try to buy a jig usb
galaxy s2 not work black screen
my brothers ,, my mobile it is black screen , when i changed the boot file in my mobile it is get black screen ,,,, i search in ebay site on USB JIG i founded But according to the vendor to describe this piece the black screen problem not solve with this JIG
JIG link
cgi.ebay.com/Samsung-Galaxy-SII-I9100-USB-Jig-RESET-FLASH-COUNT-0-/140579355451?pt=PDA_Accessories&hash=item20bb2ebb3b
please help me how i can solve my problem
ababodan said:
my brothers ,, my mobile it is black screen , when i changed the boot file in my mobile it is get black screen ,,,, i search in ebay site on USB JIG i founded But according to the vendor to describe this piece the black screen problem not solve with this JIG
JIG link
cgi.ebay.com/Samsung-Galaxy-SII-I9100-USB-Jig-RESET-FLASH-COUNT-0-/140579355451?pt=PDA_Accessories&hash=item20bb2ebb3b
please help me how i can solve my problem
Click to expand...
Click to collapse
Read your other post this is a repeat of an exact same post you have just made .
jje
I saw you touched Pit so i stopped reading. Why on earth did you touch it???? Well buy a jig and try again.
Sent from my GT-I9100 using XDA Premium App
Just buy a new phone and do the exact same thing again. This time it might work. OR do what other people usual do. Read and follow the tutorials... next time, or let things be as they are.
Usually when someone writes things like "please help me pleaseeeeee" it's easy to assume it's a child behind OP. No offense.
Just buy a jig usb or use google and you will find other posts where people have made the same mistake. Google is your friend
learn more before the first operation, it is very important
Yeah, dude you are officially screwed you need to get it repaired aka someone needs to flash the bootloader aka SAMSUNG.
Related
Hi Folks,
after trying to flash the SGS-2, the phones screen is still black and doesnt
get powered on by pressing the power button, no boot, no screen. Odin dont
know about the phone - no usb connection
any suggestion what i can do?
Recovery mode or download mode ?????
jje
JJEgan said:
Recovery mode or download mode ?????
jje
Click to expand...
Click to collapse
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
afaik, you do not flash PIT for this phone, ever.
Try removing the battery, then turning on, download mode, recovery etc. If that doesn't work, you're screwed.
Try purchasing a jig. To be honest though, it sounds hard bricked. When you plug it into a power source and try to power it on if nothing at all happens that's usually a bad sign.
To offer you saving point, there are two or three places on the web that offer Jtag services which rewrite the default boot loader.
What were you doing when this happened?
Did the flash complete successfully?
These things are hard to brick although not impossible.
Edit: Oh, just saw the pit reference. Ouch, you are going to need Jtag, friend.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Dead as a dodo, jtag or RMA and hope they don't notice, say it was a failed kies flash or something.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
No instructions to flash a 512 PIT file for the SGS1 phone its a totally different PIT.Same as putting the wrong fuel in the tank .
jje
You won't be debrick it at home, only JTAG equipment can help you now. Either send it to a Samsung Service center, tell them you were updating through Kies and hope they don't notice or find a Repair Service with JTAG equipment and have them debrick it.
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
andy572 said:
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
Click to expand...
Click to collapse
You should ask the person who put it in the firmware pack... I haven't seen any downloads on XDA which contain the 512.pit file. Infact if you would've taken the time to read up on some threads here at XDA you would've known most experienced users advise and actively warn against using a pit file.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Bricked! You'll need to get it repaired by Samsung or some place with a JTAG box.
thanks for all answers here
i dont have downloaded the firmware from xda but from samfirmware.com and a wrong odin version with that **** pit file ...
... and readed the wrong tut about flashing a SGS-2 - think this was the most mistakes i've made ...
now its realy bricked and i'll see if i can send to a service center tomorrow.
i hope repair is for free ...
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 in PIT and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Did you really develop this?
Sent from my GT-I9100 using xda premium
Why did you put pit512 file in PDA section? Boot in download mode and flash rom again.
It won't boot
It is just death,no matter what I do
The pit file I put in Pit area,I'm sure about this
Do you have usb jig?
cmiui said:
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Click to expand...
Click to collapse
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
cmiui said:
The pit file I put in Pit area,I'm sure about this
Click to expand...
Click to collapse
Here was mistake, Important! Do not touch any other button or make any other changes in Odin except selecting the required file as given in step 8. Why did you touch PIT button???
Pit.
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
JJEgan said:
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
Click to expand...
Click to collapse
mcnaget said:
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
Click to expand...
Click to collapse
I used JIG usb,didn't work
cmiui said:
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
Click to expand...
Click to collapse
Search on google and you`ll find in you country(trebuie sa fie asa ceva la voi)
Did you really develop this?
Sent from my GT-I9100 using xda premium
PIT 512 Samsung Galaxy file only from memory its a totally different PIT for SGS2 .
jje
I have S 2 ,
I have flashed this ( I9100XWLP7_I9100OJVLPB_ARB ) with PIT ( android_fastboot_emmc_full_p4_16G_32G ) after that my phone goes dead , NO Respond , Even no charging as well , , , is there any solution ?
Regards
Never ever flash a PIT (unless your phone is 99% borked and flashing a PIT is that 1% chance of getting it running again). Bit late for you, obviously.
If you can't get into download mode, you might as well try a jig (but very unlikely to get you into download mode), so it's either service center or possibly a JTAG repair by a non-Samsung repairer.
auck2me said:
I have S 2 ,
I have flashed this ( I9100XWLP7_I9100OJVLPB_ARB ) with PIT ( android_fastboot_emmc_full_p4_16G_32G ) after that my phone goes dead , NO Respond , Even no charging as well , , , is there any solution ?
Regards
Click to expand...
Click to collapse
That my friend is called a hard brick. A jtag or you can try to send it to samsung and see if they will fix it
Sent from my GT-P7510 using xda premium
how can you flash wrong pit, where did you get the pit file, the fact it said 32g shouldve rung alarm bells for you!!!
As far as im aware, there is only one s2 pit file used by samsung on gb and ics for the 9100, it does come with most roms in case you need it.
In fact what youve flashed is a Galaxy Tab .pit file, if you cant get back into DL mode with a jig then youve had it im afraid, im not even sure samsung would repair this as its not a 9100 file you flashed.
---------- Post added at 12:28 AM ---------- Previous post was at 12:17 AM ----------
Here is rescue video
http://www.youtube.com/watch?v=GLryErBgdTE
good luck, hope you can revive it.
MistahBungle said:
Never ever flash a PIT (unless your phone is 99% borked and flashing a PIT is that 1% chance of getting it running again). Bit late for you, obviously.
If you can't get into download mode, you might as well try a jig (but very unlikely to get you into download mode), so it's either service center or possibly a JTAG repair by a non-Samsung repairer.
Click to expand...
Click to collapse
Thanks everyone ,
I tired mostly everything and still does not wakes up , still no power no screen and even when I connected to the PC I don't heard the sound ( Totally Dead ) .
Jig I will try to search about that , I dont know what is it .
Thanks again guys .
auck2me said:
Thanks everyone ,
I tired mostly everything and still does not wakes up , still no power no screen and even when I connected to the PC I don't heard the sound ( Totally Dead ) .
Jig I will try to search about that , I dont know what is it .
Thanks again guys .
Click to expand...
Click to collapse
Search on ebay or something for USB jig. They cost 1-2 dollars. Any more and consider it expensive.
As said above, a jig will probably not work meaning your only option is to send it to samsung for repair or to get a JTAG.
In fact the correct pit file was : u1_02_20110310_emmc_EXT4.pit
But you select for P7500 which was a galaxy tab 10.1 pit
hi guys
i write this post after 3 hours when i read all the article and all the guide to try myself to solve my big problem..
i have try to set a custom rom on my galaxy s2 by odin..actually i have a rom based on cm10..
but during the operation..i played with my child and..i have insert the old pit file of my i9000 and not the new one of my 9100...
odin system was freezed, but i have make a error to unplug and switchoff the device...resut..black screen and bricked phone...
the problem is that i work with my phone and is a problem for me send it to the assistence...what i can do? do you have some idea that can help me?:crying:
thanks in advance
sam
sam213 said:
hi guys
i write this post after 3 hours when i read all the article and all the guide to try myself to solve my big problem..
i have try to set a custom rom on my galaxy s2 by odin..actually i have a rom based on cm10..
but during the operation..i played with my child and..i have insert the old pit file of my i9000 and not the new one of my 9100...
odin system was freezed, but i have make a error to unplug and switchoff the device...resut..black screen and bricked phone...
the problem is that i work with my phone and is a problem for me send it to the assistence...what i can do? do you have some idea that can help me?:crying:
thanks in advance
sam
Click to expand...
Click to collapse
No download mode or recovery?
Tried a USB Jig?
If none work, a JTag might save it, not sure on .pit files, whether it kills the motherboard or not.
May have to be a Samsung repair job...
themadba said:
No download mode or recovery?
Tried a USB Jig?
If none work, a JTag might save it, not sure on .pit files, whether it kills the motherboard or not.
May have to be a Samsung repair job...
Click to expand...
Click to collapse
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
sam213 said:
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
Click to expand...
Click to collapse
Are you happy enough to make the Jig? They can be bought on eBay for £2 (very cheap wherever you are from).
There is a website called mobiletechvideos.com, they are based in America but they deal with these types of bricks.
As I said, not sure if a bad .pit file flash kills the motherboard or not. But try the Jig first and see if there is any response.
sam213 said:
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
Click to expand...
Click to collapse
Just take to Samsung Service center, just cook a good story Like the problem occurred update. It will be fix for free
Jokesy said:
Just take to Samsung Service center, just cook a good story Like the problem occurred update. It will be fix for free
Click to expand...
Click to collapse
My mate tried that once and he got turned down, his phone was also stock.
Don't always expect a lie to work, but I suppose if you don't want the hassle of trying to fix it, the repair centre is a phone call away...
themadba said:
Are you happy enough to make the Jig? They can be bought on eBay for £2 (very cheap wherever you are from).
There is a website called mobiletechvideos.com, they are based in America but they deal with these types of bricks.
As I said, not sure if a bad .pit file flash kills the motherboard or not. But try the Jig first and see if there is any response.
Click to expand...
Click to collapse
The problem is not the cost of jig cable but the time that I need to wait before receive it. I if I try myself maybe that I can save one week and, if this trick don't work, and I will send the galaxy s2 in the Samsung services...
I'm member of Samsung exclusive.. I hope to save some days..
Anyway... I hope to solve with a jig cable.. In the meantime I have found a basic smartphone from my friend.. Just to make a tethering and use my asus transformer for all the normal operation...
But.. Just for my information.. How a wrong file can generate a hardware problem in the motherboard?
I repeat...I'm really very stupid! I have make this operation a lot of times... And without attention I have make this operation yesterday... @##@#....
Thanks guys.. If some people have some extra idea... Reply me please!
Sam
You could be surprised the damage flashing wrong .pit file can do. I suppose doing what Jokesy said would be worth a try.
Sent from my GT-I9100 using xda app-developers app
please guys i really need some help.
i tried to update my phone but i had put on a bad firmware (i9100 instead of i9100g)
now it doesnt do anything exept when i connect it to a usb it will turn on and put the "samsung galaxy s2 GT-i9100g" with a yellow triangle.
i cant put it in download mode can someone please help me ?
enniocharchar said:
please guys i really need some help.
i tried to update my phone but i had put on a bad firmware (i9100 instead of i9100g)
now it doesnt do anything exept when i connect it to a usb it will turn on and put the "samsung galaxy s2 GT-i9100g" with a yellow triangle.
i cant put it in download mode can someone please help me ?
Click to expand...
Click to collapse
You have been asking many common questions asked. And you managed to install the wrong firmware? The thing you can do is to use a USB jig. If it doesn't work then many Jtag or samsung.
You really need to stop creating multiple threads. It's not your first time.
Your other thread (http://forum.xda-developers.com/showthread.php?p=33426283) for this issue even already has the answer you are looking for, and you even thanked the guy who linked you to the answer you were looking for. What's your issue now?
yes i know but this is another problem ... i cant seem to put it in download mode and i have search a lot of threads but none seems to be helping me
Use a USB jig. If it doesn't work, Jtag or Samsung. This question has been asked multiple times.
i know it has been asked but non of them are working with me are there any other way please i nedd some help, i have the firmware odin... but the only problem is that i cant put it in download mode
enniocharchar said:
i know it has been asked but non of them are working with me are there any other way please i nedd some help, i have the firmware odin... but the only problem is that i cant put it in download mode
Click to expand...
Click to collapse
If you can't put it in download mode there is no other way. Unless you can go to CWM.
Sent from my GT-I9100 using xda app-developers app
ctomgee said:
You really need to stop creating multiple threads. It's not your first time.
Click to expand...
Click to collapse
.........and it wont be the last.
Clear cut case of needing spoon-fed all the way..........lol.