Hi all,
Can anybody clarify for me rooting procedure for Toshiba Folio 100. (ideal step by step - i am not so trained user - I am by myself successfully rooted my X10, but root of folio can be complicated... )
I need do root this tablet from reason my yesterdays stupid upgrade to last official ROM - 2.2.5.0131...
How i was read here - root is necessary step before install again "non problematic" official ROM and after that - instal MOD1.4 custom ROM.
It may be a stupid question, but I nowhere found rooting procedure to FOLIO...
Many thx for a help and sorry for my english.
[/QUOTE]It may be a stupid question, but I nowhere found rooting procedure to FOLIO...
Many thx for a help and sorry for my english.[/QUOTE]
theres no rooting procedure you just download superoneclick 1.6.5 (you will find it here on this website)
extract the folder to you desktop
plug your folio make sure debug is checked
open superoneclick 1.6.5 click root
and WAIT until a message comes up saying ;Your device has been rooted ;
DONE
Moved to general as not android development
Perfect! that it is... many THX...
Please can anyone show me a way to root my phone which has 2.2.1. Is the only way to go back to 2.2? Can I go back to 2.2 without obtaining root?
Thanks.
yes you must downgrade to 2.2 using kdz (you don't need root to do this). There are lots of guides on this forum on how to do it.
Thank you for your reply and advice
mailsyedsajid is online now mailsyedsajid
Old Yesterday, 06:59 PM
RetweetReTweet this post
# 1
report
Question [Q] Need help/Suggestion!!!
Hi I bought a Lg P500 a month back,details are:
Android Version:2.2.1
Kernel Version:2.6.32.9
Build Number:FRG83
Software Version:V10c DEC-08-2010.
When i checked through Lg update notification it said a new version 10d is avaialble.
Q1)What is the difference between v10 c and v10 d ??
Q2)suppose if i upgraded my phone to 10d,if i didnt like the update can i revert back to old version??
I am using APP2SD and moved all apps to mem card.
As my phone has 40 pre-apps which stored in internal memory ,My phone has hardly 19-20 mb free internal memory..So it is very difficult to manage .
Q3)Can anybody please suggest how to remove Preinstalled apps which i dont want??
I am afraid to install custom roms mentioned in the other posts as the phone is only 1 month old .
Q3)Does Warranty still exists if i do any custom rom like cynogen or unofficial ginger bread update etc?
Please suggest some tips to improve Performance of my Phone .
Many Many Advance thanks for replying ..
Thanks
mailsyedsajid said:
mailsyedsajid is online now mailsyedsajid
Old Yesterday, 06:59 PM
RetweetReTweet this post
# 1
report
Question [Q] Need help/Suggestion!!!
Hi I bought a Lg P500 a month back,details are:
Android Version:2.2.1
Kernel Version:2.6.32.9
Build Number:FRG83
Software Version:V10c DEC-08-2010.
When i checked through Lg update notification it said a new version 10d is avaialble.
Q1)What is the difference between v10 c and v10 d ??
Q2)suppose if i upgraded my phone to 10d,if i didnt like the update can i revert back to old version??
I am using APP2SD and moved all apps to mem card.
As my phone has 40 pre-apps which stored in internal memory ,My phone has hardly 19-20 mb free internal memory..So it is very difficult to manage .
Q3)Can anybody please suggest how to remove Preinstalled apps which i dont want??
I am afraid to install custom roms mentioned in the other posts as the phone is only 1 month old .
Q3)Does Warranty still exists if i do any custom rom like cynogen or unofficial ginger bread update etc?
Please suggest some tips to improve Performance of my Phone .
Many Many Advance thanks for replying ..
Thanks
Click to expand...
Click to collapse
man there is nothing to worry just dowwngrade to 2.2 rom via kdz flasher
root ur phone using z4root
install custom recovery drellside1.2.1
INSTALL DARKTREMOR A2SD
install custom zip rom
BE SURE WHAT YOU ARE DOING AND READ THE THREAD CAREFULLY AND ENJOY THE CUSTOM ROMS ITS WORTH A TRY!
IF U NEED ANY HELP PM ME
Hi and welcome!
I'll try to reply to your questions in the same style
Q1: There is small difference between V10c and V10D. In my opinion, it is not wise to update original fw until the official 2.3 arrives. If you upgrade from 2.2 to 2.2.2 you'll loose the ability to root your phone.
Q2: You can always downgrade your device using KDZ. If you need more info on this one, follow this thread. Just make sure to read carefully and try to understand the risk that implies flashing with KDZ. If you pass this ones, you'll be upgrading and downgrading in no-time.
Q3: You can remove pre-installed apps only if you root your phone, and use an root un-installer, or by flashing a different rom with no pre-installed apps.
To do this, you have to have Android 2.2 on your device (not 2.2.2), and use a tool like SuperOneClick Root or Z4Root. Again, you should be careful and read every warning.
To get the most from your phone, check out the threads on XDA forum regarding Optimus One Android Development or Optimus One General. There are a lot of things to do, with a lot of details and tutorials, just follow carefully.
I hope this helps you.
Cheers mate!
Ruwin said:
Hi and welcome!
I'll try to reply to your questions in the same style
Q1: There is small difference between V10c and V10D. In my opinion, it is not wise to update original fw until the official 2.3 arrives. If you upgrade from 2.2 to 2.2.2 you'll loose the ability to root your phone.
Q2: You can always downgrade your device using KDZ. If you need more info on this one, follow this thread. Just make sure to read carefully and try to understand the risk that implies flashing with KDZ. If you pass this ones, you'll be upgrading and downgrading in no-time.
Q3: You can remove pre-installed apps only if you root your phone, and use an root un-installer, or by flashing a different rom with no pre-installed apps.
To do this, you have to have Android 2.2 on your device (not 2.2.2), and use a tool like SuperOneClick Root or Z4Root. Again, you should be careful and read every warning.
To get the most from your phone, check out the threads on XDA forum regarding Optimus One Android Development or Optimus One General. There are a lot of things to do, with a lot of details and tutorials, just follow carefully.
I hope this helps you.
Cheers mate!
Click to expand...
Click to collapse
thanks for your kind advice .. I have tried to root using z4 root but it didn't rooted my phone instead my phone was lil bit slow after installation then i have upgraded to V10D through original firmware which shown in my pc suite .
It have tried to open the following link
http://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP500
but it seems the link is not working.
So ..I m thinking better to wait for one more month for LG till it releases 2.3 ..
Man, you'll have to wait more than one month for 2.3... :|
About the link you cannot open, i guess it is broken, it doesn't work for me either. But you must be able to find the fw you need for your country by searching for it on google. I found mine on other forum, and it works perfect. Just google "lg optimus one <<your country>> rom" (no quotes) and you shall find it. Be sure to get the *.kdz file, not *.dz, they need some other application for flashing, and it is more complicated.
About rooting with z4root, you need to downgrade to v10C or below (maybe v10D works too, i haven't tried) and then use z4root. Make sure you have debugging checked in applications before using z4root.
If you want to root v10D or newer (but up to android 2.2.1) you should be able to do it using OneClick method, it is easy enough, though you need the drivers installed on your pc, as you will connect the device via usb.
Tell me where are you from, maybe i can get you the original fw, at least i can help finding
Cheers!
Ruwin said:
Man, you'll have to wait more than one month for 2.3... :|
About the link you cannot open, i guess it is broken, it doesn't work for me either. But you must be able to find the fw you need for your country by searching for it on google. I found mine on other forum, and it works perfect. Just google "lg optimus one <<your country>> rom" (no quotes) and you shall find it. Be sure to get the *.kdz file, not *.dz, they need some other application for flashing, and it is more complicated.
About rooting with z4root, you need to downgrade to v10C or below (maybe v10D works too, i haven't tried) and then use z4root. Make sure you have debugging checked in applications before using z4root.
If you want to root v10D or newer (but up to android 2.2.1) you should be able to do it using OneClick method, it is easy enough, though you need the drivers installed on your pc, as you will connect the device via usb.
Tell me where are you from, maybe i can get you the original fw, at least i can help finding
Cheers!
Click to expand...
Click to collapse
thanks .. i have found the original firmware from
http://forum.xda-developers.com/showthread.php?t=944881
will check and update if i need any info..
Read this- [HOWTO] Rooting, Installing -Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
Greetings,
I am attempting to root a LG P505 "Phoenix". I have scoured the forums, but all the androir 2.2.2 exploit links are dead. I believe it is because they are all old posts. I can not update the version for multiple reasons.
Sorry for the noob post, but I cant find a valid download.
Does anyone have valid links for me to download compatable root exploits?
Hi There, using Gingerbreak should be able to root all 2.2.2 phones. Give it a try
http://www.itsmyiphoneworld.com/android-device/howtorootandroidversionfroyo222
Hello,
I've bought a tPAD-7122 (a.k.a. Honron HM07A-W or Link:
www
eforchina
com/view/80363/HM07A-Coffee--7.0-inch-Capacitive-Touch-Screen-Android-2.1-aPad-Style-Mobile-Phone-Function-Tablet-PC-with-WIFI--Built-in-3G-Module--WCDMA-850---1900---2100MHz--EVDO---360-Degree-Menu-Rotate--Support-TF-Card-up-to-32GB--CPU--RK2818--600MHz.h t m). Tried almost anything I could find on the net (universal androot, Z4root, GingerBreak and the like) to root it and no luck.. It has a 2.1 Android on it and it's mainly Chinese customized. Not sure how to proceed next. It is RK2818 based so I think it shouldn't be too complicated. I also have the original ROM's pulled out just in case needed.
Is there anyone who could help?
Much appreciate it guys.