Aite so i was running stock 3.1, then flashed poitees kernel and couldnt charge the tab when it was off. Then i flashed pershoots kernel and i still had the charing problem as well as now when i plug in the tab to my pc, nothing happens. Just charges. The tab doesnt show 'usb connected' and that 'kies' screen doesnt pop up. Running windows 7 64 bit. Got all the drivers for it. Tried on my laptop and other desktop as well. Just charges. Flashed back t ostock. Charging when off is fine but USB still doesnt work :S
Any suggestions?
I have the same kernel issue. Reverted back to stock and problem is gone. Just charge it while it is on standby.... and don't leave it discharge till it can't be turned on.
Related
Hello there,
yesterday i got my phone back as it should get repaired (which it wasnt as it was not a warranty case) and so i rooted it and reinstalled cm10. all went fine and everything worked as it should.
installed a few apps and sync was all good. no force close or errors in general. During the night I kept it connected to my notebook (in standby) so it gets charged.
Bad surprise: I woke up and it didn't react at all. Black screen. nothing happens when removing the battery putting it back in and plugging in the usb-cable. no touch lights or whatsoever. no recovery, no download mode. just nothing at all.
i do have a wobbly usb port on my phone but yesterday it charged just fine without any interruption. just data mode wont work perfectly (loses connection and connects again) actually it always charges fine. so i dont think it is because of the usb port.
so what shall i do? i didnt use the phone overnight, it wasnt connected in wifi. just idling and now it isnt responding anymore...
hope that somebody can help
cheers
lolmensch said:
Hello there,
yesterday i got my phone back as it should get repaired (which it wasnt as it was not a warranty case) and so i rooted it and reinstalled cm10. all went fine and everything worked as it should.
installed a few apps and sync was all good. no force close or errors in general. During the night I kept it connected to my notebook (in standby) so it gets charged.
Bad surprise: I woke up and it didn't react at all. Black screen. nothing happens when removing the battery putting it back in and plugging in the usb-cable. no touch lights or whatsoever. no recovery, no download mode. just nothing at all.
i do have a wobbly usb port on my phone but yesterday it charged just fine without any interruption. just data mode wont work perfectly (loses connection and connects again) actually it always charges fine. so i dont think it is because of the usb port.
so what shall i do? i didnt use the phone overnight, it wasnt connected in wifi. just idling and now it isnt responding anymore...
hope that somebody can help
cheers
Click to expand...
Click to collapse
Does anything happen when you charge it with the normal wall charger?
Any way to try with another battery... just to see if the phone is really bricked or maybe there is no juice left in the battery...
also clean out your USB port with a toothbrush.. I had a similar issue with USB connection.. cleaning it out resolved that...
s_vohra said:
Does anything happen when you charge it with the normal wall charger?
Any way to try with another battery... just to see if the phone is really bricked or maybe there is no juice left in the battery...
also clean out your USB port with a toothbrush.. I had a similar issue with USB connection.. cleaning it out resolved that...
Click to expand...
Click to collapse
thank you for your tips.
nothing happens with the normal wall charger. trying another battery will be possible tonight and i will report back.
did the cleaning. didnt change anything with not charging but maybe if the phone will boot with the other battery it might have helped ^^
i read the other bricked thread and that was quite disapointing. still have warranty on it so maybe i'll send it directly to samsung rather than amazon.
thanks anyway for your help.
just might be interesting for cm10 users. I mean I did absolutely nothing with it. or maybe it was nand failure. idk
Hi guys,
I've been running Cyanogen for a long time on my GT-P7510, and I noticed a couple of days ago that the battery charging lightning bolt is now staying constantly on, regardless of whether there is a cable plugged in or not!
I've tried rebooting, wiping all caches, even reflashing, but it still says it's charging. This wouldn't bother me much, but a side effect of this is that when I plug it in to my PC via USB to transfer media, now the connection is never detected. Argh.
Anyone seen this before or have a suggestion of something to try?
Much appreciated
Chris
Well, *something* happened to make it realize when it was not plugged in. I went to load some media, plugged it in to my PC, MTP wasn't enabled, enabled it, now it's stuck "charging" all the time again, so no USB detection. Argh! So I know if *can* go back to normal, but I still have yet to figure out how to make this happen.
Any thoughts?
Much appreciated.
Ive tried searching everywhere on here but cant find anything concrete. Hopefully you can help me out
Verizon - Samsung sch-i500 fascinate.
It has been running Dirty Unicorn. Its the only one that's lasted for more than a month. All of a sudden the other day it started having problems.
The phone with battery in and just power button keeps putting into Download Mode. The only way to remedy it it to hook it up to computer with USB. While phone in hooked up it charges and everything is fine. The moment i pull the USB cord off it gets super sluggish like 50 mhz cpu or something. Then after about 3 minutes it crashes to black screen and i have to reboot it with the battery and usb hooked up. USB & Battery in pressing p. button it will boot up perfect and run again until i pull the usb. Also when rebooting with the p.button only and USB/Batt combo the first thing that shows up is a charging battery for 5 seconds then it reboots automatically into Recovery. Then I select reboot system and thats when everything works. Ive tried recovering OS and even tried different recovery flashes with Rom Manager.
USB debugging is on although the icon isn't there when cable up. Phone will charge.
I tried doing ODIN to reformat but ODIN wil never connect to it. I'm running the Samsung Driver that worked before. (Tried uninstalling and reinstall)
This leads me to believe its a USB issue somehow. That's why I'm here.
I just want this thing to work without being hooked up to USB.
Hi guys, I have very big problem with my xperia. Few weeks ago i installed cyanogen mod (http://forum.xda-developers.com/xperia-u/p-development/-t2626639) evrything was working fine, but suddenly when i connected my charger to phone, it do not recognized it is charging. After some time of charging battery level goes up, but phone is hot as hell. After charging to 100% phone is rebooting and staying on sony logo, its turning on only after disconecting a charger. Battery life is like 15 minutes. I have tried to reflash cyanogen, didnt help. Then i wanted to reflash stock rom but after connecting phone to computer nothing happends, computer dont see phone. I have tried a lot of chargers and cables, nothing is working fine. I was thinking tahat maybe usb port is somehow destroyed, but phone is "charging".If you can please help. Cheers.
@krzywy1121
Change you battery.
soft
I think it is not battery becouse i can not even connect my phone to computer. I think it is some kind of soft problem, but i don know how can i flash stock rom over cyanogen without using flashtool.
krzywy1121 said:
Hi guys, I have very big problem with my xperia. Few weeks ago i installed cyanogen mod (http://forum.xda-developers.com/xperia-u/p-development/-t2626639) evrything was working fine, but suddenly when i connected my charger to phone, it do not recognized it is charging. After some time of charging battery level goes up, but phone is hot as hell. After charging to 100% phone is rebooting and staying on sony logo, its turning on only after disconecting a charger. Battery life is like 15 minutes. I have tried to reflash cyanogen, didnt help. Then i wanted to reflash stock rom but after connecting phone to computer nothing happends, computer dont see phone. I have tried a lot of chargers and cables, nothing is working fine. I was thinking tahat maybe usb port is somehow destroyed, but phone is "charging".If you can please help. Cheers.
Click to expand...
Click to collapse
Im having the same problem here. HAve you managed to solve this?
Thanks
I've changed the battery, and it didn't make nothing. Phone can't recognize the cable plugged in, if i plug charger in, it charges, but don't indicate it. I can't connect my xperia to pc and flash stock rom. Any ideas how to solve my situation ?
Ok, I saw a lot thread about simular problems, biut nothing resolved my problem. So here it is.
Tried to connect my generic Galaxy S3 (no carrier) to my PC (and also my PC at work), with 3 different USB cables. As i connect, charge indicator worksand cahrges, but nothing else. No data connection, no driver istall attempt, no sign of connection on the notification bar. Tried going to download mode, and still not recognized by the PC. Drivers were uninstalled and reinstalled on both PC.
And to top of that. Battery drains faster then it charges. Only way to charge it is to shot the screen of. But it takes a lot of time to charge fully.
ROM: OmniROM 4.4.4, stock kernel, philz touch 6