Amend scripting (update-script) is no longer suppported.
Amend scripting was decrecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
How did I get to this...
I Odined EB01 with Atlas 2.2.pit and then flashed CWM all in order to install CWM 3x. Then did ext4 formatter all then tried to install eb01 voodoo kernel. but no go...
Can anyone help me with this?
Did you fully boot after flashing eb01 before trying to flash cwm?
Also if your using a recovery that is 3x.x.x it shouldn't matter about the ext4 formatter...if your coming from the stock eb01 and want voodoo....odin the eb01 file with
2.2pit....reboot fully, then odin 3.x.x.x. recovery, three finger boot and wipe everything and install your voodoo kernel...it should take just fine.
Sent from my SCH-I500 using XDA App
efan450 said:
Did you fully boot after flashing eb01 before trying to flash cwm?
Also if your using a recovery that is 3x.x.x it shouldn't matter about the ext4 formatter...if your coming from the stock eb01 and want voodoo....odin the eb01 file with
2.2pit....reboot fully, then odin 3.x.x.x. recovery, three finger boot and wipe everything and install your voodoo kernel...it should take just fine.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Was I supposed to boot up after flashing EB01 before installing CWM 3x, ext4 formatter, and eb01 voodoo?
I did all of this before the first boot up
I found a solution but don't know how it worked...did some research and found that CWM3 is only for Edify ROMS and Themes and the CWM 2.5x works for both Amend and Edify...
Maybe I needed Amend in order to be able to install this kernel...whew
OK Update...within CWM 2.5x when i installed the voodoo the installation went through...but its taking particularly long for it to boot...I'm still at the Samsung logo...I have a feeling I bricked it again
Use this one to flash the edify and amend zips.
good day.
chopper the dog said:
Use this one to flash the edify and amend zips.
good day.
Click to expand...
Click to collapse
Thanks, I have decided to use this one. The installation went through but I can't get through the Samsung boot up logo...it's been about 15 minutes already...
Ok here's what I did
Odin EB01 + Atlas (re-partition checked)
Odin CWM 2.5x ALL
Reformatted ext4
Wipe system x3
Wipe Cache x3
Wipe Dalvik Cache x3
Installed EB01 Voodoo kernel from http://forum.xda-developers.com/showthread.php?t=983395 (installation successful)
Rebooted (unsuccessful)
Phone stayed in Samsung Logo...
What am I doing wrong...
Re-do the full odin package, boot, shut down, pull battery, flash cwm in odin, insert batt, 3 finger to recovery, flash rom and or kernel of choice, boot, sign into google.
Stop all that wiping and skip the ext formatter.
good day.
Thank you so much! I gotta remember to do this step by step for any sort of ROM and/or kernel!
Related
Ok, after successfully rooting and putting EB01 on my phone, I discovered that when I tried to install zip files from my sd card that I was taken into Samsung recovery (blue). I found out that my CWM was dated, and needed a new one. In looking for the most current version, I installed CWM 3.0.0.8. Now when I attempt to install from SD, I am rebooted into red CWM, but it doesn't like the script, so it aborts installation of whatever ROM I try to install. Update.zip kicks me into CWM 3.0.0.8, and when I try to install from there I get a similar message. I have tried to flash a different CWM through Odin, but nothing changes. I have also tried to use the "All ClockworkMod Recoveries" option, but it tells me "An error occurred while downloading your recovery" regardless of which version I select.
I am running Superclean 2.2 and have Rom Manager v3.0.1.0
I did see a similar thread to this for an HTC Hero phone, and it seemed to indicate the CWM I installed is for Gingerbread. Hoping there might be an easy fix to this I am overlooking so that I don't have to start from scratch. TIA!
It's not JUST for Gingerbread. The scripting language that the newest cwm uses is edify. And the latest cwm doesnt support the older scripting languages that the zip scripts used to be written in. so all the scripts need to be updated to use edify. And they'll work fine. Even on froyo.
Sent from my SCH-I500 using XDA App
Also, the newest version of Superclean (2.7) uses edify, so you should be able to flash that in CWM 3.x
times_infinity said:
It's not JUST for Gingerbread. The scripting language that the newest cwm uses is edify. And the latest cwm doesnt support the older scripting languages that the zip scripts used to be written in. so all the scripts need to be updated to use edify. And they'll work fine. Even on froyo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Ok, that makes sense. Is there anything I can do to update the scripts?
I am trying to do the same thing. I want to have a Rom Manager version on my phone that allows me to use the 'install zip from sd card' function in the program and run the scripts correctly.
I have replace the update.zip and update-recovery.zip with th red jt1134 CWM zip, but the latest version of CWM seems to write scripts entirely differently, so it'll get me into recovery and then recovery can't run the scripts. Any idea of how I can go back to a prior version of Rom Manager?
spenceuiuc said:
I am trying to do the same thing. I want to have a Rom Manager version on my phone that allows me to use the 'install zip from sd card' function in the program and run the scripts correctly.
I have replace the update.zip and update-recovery.zip with th red jt1134 CWM zip, but the latest version of CWM seems to write scripts entirely differently, so it'll get me into recovery and then recovery can't run the scripts. Any idea of how I can go back to a prior version of Rom Manager?
Click to expand...
Click to collapse
Odin. Here's the page. http://forum.xda-developers.com/showthread.php?t=942021
Just use manual cwm for now. The ROM Manager is going to fudge it for the time being. I don't trust RM to do a proper wipe before install either. It would be nice to use the RM gui, but its better to just spend a few extra minutes to make sure things get done right.
How do you get into CWM
How do you get into CWM without Rom Manager????
derond1 said:
How do you get into CWM without Rom Manager????
Click to expand...
Click to collapse
If you already have a super clean rom, just hold your power button to pop up the power down screen. Then select the option for "Recovery".
OR
Turn off phone. While turning it on, hold the power button+up volume+down volume. The Samsung logo will turn on, then turn off. Release the buttons and it will come on again then boot to recovery. Then select the option "update.zip" to launch into CWR.
So far what are the problems with the new CWR recovery 3.0? I want to flash to the newest SCv2.9 but Im reading some iffy comments on it. What are the possible drawbacks and is the only way to get back to CWR 2.5 through Odin? because since I own a mac this is a ***** and a half to do! Can you also run CWR 2.5 on SCv2.9?
Thanks in advance.
tumness420 said:
So far what are the problems with the new CWR recovery 3.0? I want to flash to the newest SCv2.9 but Im reading some iffy comments on it. What are the possible drawbacks and is the only way to get back to CWR 2.5 through Odin? because since I own a mac this is a ***** and a half to do! Can you also run CWR 2.5 on SCv2.9?
Thanks in advance.
Click to expand...
Click to collapse
I was able to follow the thread by jt that has a simple zip and install with my cwm 3.0.x.
sent from Froyo'd Fascinate!
Ok, bear with me. I'm lost... when it comes to installing new roms and kernels with and without voodoo. I tried installing overstock, had to odin back to jk6 or jk2. Then tried to install a rom with overstock kernel and odin back. I'm just curious as to how can I install it without having to odin back.
Sent from my GT-I9000 using XDA App
if you are trying to install voodoo enabled stuff over a voodoo enabled kernel you should be fine in just installing over the voodoo kernel with EXT4 enabled, however if you are trying to flash back to an RFS based kernel you will first need to disable EXT4.
To disable EXT4 you need to:
1) reboot into RED Voodoo recovery using the 3 button method
2) scroll down to Voodoo Lagfix option in recovery
3) select disable lagfix and /system lagfix off
4) reboot phone
5) reboot into download mode after full reboot
6) flash
now this is all assuming you had allowed the ext4 conversion process to fully take place prior to trying to reflash. Typically the initial conversion may take anywhere from 3-10 minutes so be patient when flashing a Voodoo Enabled rom over an RFS rom.
So i rooted my phone manually (ran rage.bin, pushed su, busybox, and Superuser) and then used odin to flash the CWM_recovery_DL09.tar. to get to CWM recovery i had to go through blue recovery every time (apply update.zip). Once i got into CWM i flashed a DL30 rom and my phone wouldnt boot. not only wouldnt it boot but blue recovery wouldnt apply the update.zip. i had to odin back to DJ01 stock.
Now i flashed the EB01 root/recovery/superclean and then flashed the red CWM-all.
I have two questions. Did my phone originally brick because i was supposed to flash a DL09 rom instead of DL30 rom? And now that i can get into red recovery directly, am i safe to flash whatever i want?
I assume that since i dont have to go through blue recovery, and i can go directly to red CWM, i should always be able to get into CWM and restore a backup if i hose my system right?
unbelievable
Did the dl30 rom have a kernel? If not you were trying to run froyo with the stock eclair kernel. Can't imagine that works to well. And yes now that cmw is properly flashed, barring a major snafu, you should always new able to enter cmw using the 3 key method.
Sent from my SCH-I500 using XDA App
I'm running kb5 rom and modem. I'm rooted, rom manager clockworked, installed the install.bat so I can get past the verification error for install packages in recovery, I have everything working right (my problem is getting into clockwork recovery... Every time I install packages It will load the packages and then just reboot my phone....) I can't get into clockwork to install trigger 3.3 rom
Can someone please tell me what I'm doing wrong I have tried everything from flashing back to 2.1 jdf rooting, install packages, clockwork, installed trigger 3.3 and it flashes the rom and just keeps rebooting into recovery over and over that's the closest I have gotten. That's why I'm currently trying to flash this trigger 3.3 rom on 2.2 froyo but cannot get into clockwork now....
I'm ready to go do a keg stand!! Any help would be greatly appreciated!!!!
Jfd via odin
Root with update.zip
Reinstall
ROM manager, flash cwr, reinstall packages twice.
Reboot
Move trigger to internal after verifying md5
Wipe
Flash
Reboot
Wait
Enjoy
What 2.2 rom are u flashing trigger3.3 over? I believe trigger3.3 is a no wipe update specifically for trigger. Can't be flashed by itself or over any other rom.
Sent from my SGH-T959 using XDA Premium App
kb5+voodoo
Figured it out. I just flashed the kb5+voodoo kernal witch included clockwork easy access. After odin that kernal I flashed with ease... thanks hope this helps somebody trigger roms are awesome!
Trying to install clockworkmod but I have 3e recovery. I did it through rom manager which was a nub mistake but I didn't know 3e was going to troll me. So it says:
e:failed to verify whole file signature
e:signature verification failed samsung "3e"
I then followed this thread: http://forum.xda-developers.com/showpost.php?p=16909269&postcount=12
and tried the Speedmod kernel to get rid of 3e like the person said but that rom is for the international version and now I can't connect to verizon.
So at the point I am thinking using Odin is my only option but all roms are .zip and not .tar. I am clueless as what I can do. Please help me.
So I tried the Odin method in this thread http://forum.xda-developers.com/showthread.php?t=1026746 and flashed the pit and stock 2.1 files. It passed with green in odin but when I put the battery back in it boots into 2e but says # Manual Mode # at the bottom. I am not sure if that means the flash didn't actually work or what. I am lost now.
Thought I'd update this thread since I finally fixed the problem and sucessfully put Cyanogenmod7 without using the stupid Rom Manager after about 8 hours of work. So just in case someone wants to know what I did. For some reason Odin was not working so I used Heimdall v1.83 and the EB01 Heimdall package and sucessfully flashed to froyo 2.2. I mounted the sdcard and put Cyanogenmod7 and gapps on it.
Now I used Odin to flash the CM7 capable CWM (I think its version 4). Booted the phone into download mode and then used jt1134's ClockworkMod Recovery found in the CM7 fascinate wiki. The wiki says use Heimdall but I used Odin and it worked. The CWM is now blue instead of Red. Next I did a wipe data/factory reset along with wipe cache partition. I selected install zip from scard and choose the CM 7.1 package. Everything went well and it boots into CM7. NOW TO INSTALL THE GAPPS. I thought I just boot into CMW using the volume buttons and power button BUT NO that is NOT correct. In CM7 you have to hold the power button and press reboot and then select recovery AND THEN IN THAT CWM select install zip from sdcard (choose gapps). THIS IS IMPORTANT OR ELSE GAPPS WONT INSTALL. I was bummed for like another hour.
So there it is how to install CM7 just when you think you have been to hell and back with the fascinate. Never again am I volunteering myself to help root and install CM7 on a friend's fascinate. The droid incredible was soo easy!