So I'm trying to install cyanogen rom on my lg optimus t and did everything i thought i was supposed to. PArtitioned the SD card and created folder 'AAA' where I placed the rom zxip file, per the attached instructions i was following. Wiped appropriate data and even did a backup via system recovery menu. However, when i went to flash the rom via the system recovery menu, I get E:no zip files found. I can't do a NAND restore either. I pretty certain that the zip file is on the sd card in the zip folder but can't get to it for some reason. Any body got any ideas? phone won't reboot either, stuck at the android splash screen.
Here's the instructions I was following //lgp500.wordpress.com/2011/07/07/gingerbread-cyanogenmod7-rc1-rjtchn-installation-guide/
you'll need to add the http prefix since forum policy won't let me post a link as a new user with less than 8 posts. Thanks.
Brice
Sigh. Did you copy the file before you partitioned the card? If yes, then you should have realised that the partitioning process will wipe all data on the sd card. Connect the phone to a computer and copy the zip file again.
yes the last thing i did was to copy the zip file the folder i created after partitioning. the folder was created on the fat32 part of the card. unfortunately, when i toggle the USB mass storage from the recovery menu, the drive doesn't show up on my computer. The phone won't start up now and so I can toggle it through the OS either. Is there some way to get the drive to show up when toggling the USB -MS through the recovery menu?
Possibly there were some errors when copying. If you have a card reader then try connecting the card to the computer through it. Else try partitioning again thorugh recovery, then see if the drive shows on the computer.
so i got the rom flashed and seems to be working but i'm not seeing the notification bar. anybody had this issue with cyanogenmod7-rc1?
Hem as far as getting your PC to recognize your phone when it
Plugged in the USB its prolly do to a lack of phone drivers. Don't know if the would be in the android sdk. Found allmy HTC phone drivers with it. And as far as the status bar h should be able able to change font colors St inthe cyanogenmod options under settings. Hope this helps some
Lord craigus
Sent from my COS-DS using XDA App
for the drivers:
http://forum.xda-developers.com/showthread.php?p=15960064#post15960064
Thanks all, I just reflashed the rom wand the notification bar was there and all seems to be working well. Thanks for all the good advice. Once I got a card reader and moved the zip files out of the folder I created and into the root directory of the card the phone saw them fine and was able flash the rom. I'll definitely download those drivers
Step by Step Guide - Help
I have official european gingerbread version 2.3.3
My phone is NOT ROOTED
I want to install CUSTOM ROM CyanogenMod7-RC1-rjtchn.zip
( or any other stable ROM you can suggest with link)
Now please explain me the step by step guide to do this.
THANKS.
specially_foru said:
Now please explain me the step by step guide to do this.
THANKS.
Click to expand...
Click to collapse
Kindly read the sticky threads.
specially_foru said:
I have official european gingerbread version 2.3.3
My phone is NOT ROOTED
Click to expand...
Click to collapse
If your phone is not rooted, then you can't have any ROM installed.
dr.notor said:
Kindly read the sticky threads.
Click to expand...
Click to collapse
Please forgive my dumbness but what is the sticky threads. If possible please give me link. Thanks.
specially_foru said:
Please forgive my dumbness but what is the sticky threads. If possible please give me link. Thanks.
Click to expand...
Click to collapse
The sticky thread is the one that is stuck on the top of the forum, with [READ FIRST] in the title.
I would also like to quote something else:
zelendel said:
XDA is not the cool place for idiots to hang out.
Click to expand...
Click to collapse
dr.notor said:
The sticky thread is the one that is stuck on the top of the forum, with [READ FIRST] in the title.
I would also like to quote something else:
Click to expand...
Click to collapse
I agree that XDA is not for idiots.
BUT I MAY HAVE BORN IDIOT BUT I DON'T WANT TO DIE AS AN IDIOT. THAT'S WHY ALL THESE QUESTIONS
Thanks for reply and helping. Hoping for your guidance in future also
Related
Hey everybody,
I apologize in advance if this post is a duplicate but I have tried searching for a solution and still lost. Here is what I did: I used the Odin to restore stock rom, then re-rooted using the one click method, then downloaded a rom from theunlockr.com, then used rommanger to install it. My rom has gave me no problems but now when I try to reboot into recovery to install something else(Like the 2.3 keyboard or a lagfix) i get this error:
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
Can someone please help me? Thank you, BTW I have a Samsung Vibrant running axura-froyo-rom
I had the same problem too.
When I put update.zip at the root directory of internal memory... once I restart the phone (not get into the recovery mode), this file is missing / dissapear. So... I always got this message too :
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
anybody can help us pleaseeeeee
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
CarlosCruz15 said:
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
Click to expand...
Click to collapse
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
mikomikos said:
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Click to expand...
Click to collapse
check out this link...its what i used
http://forum.xda-developers.com/showthread.php?t=734475
listen to s15's post....he knows what he is talking about. i followed his noob guide in his sticky and everythign worked perfectly! his vids are also very helpful. one thing i have found that works a lot as well is if you download ROM Manager from the market and then click on "fix permissions"... don't know if this would help in this situation but i have had that fix weird stuff.
s15274n said:
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
Click to expand...
Click to collapse
yeah this, the update.zip is ESSENTIAL for your phone to run the clockwork recovery, it stores all the things needed, and when you click "reinstall packages" your system goes in update.zip and looks for what to boot up and finds CWR and boots that so you see that screen.
Don't delete it if you did.
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Rayn1328 said:
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Click to expand...
Click to collapse
When you usb into your phone it needs to be in the initial area of your sdcard.
You might have a bad update.zip file. Two things, verify the md5(if possible) from where you got it and check the properties and make sure it's not names update.zip.zip. The later is very common.
Try this method too btw, when I Odin back to stock I always use this one to root again. Follow the 'Automated Method' area.
http://forum.xda-developers.com/showthread.php?t=786877
you will need these drivers AND set your phone to debugging mode (settings/applications/development check USB debugging).
http://forum.xda-developers.com/showthread.php?t=728929
hey all,
Newbie here trying to flash a ROM, i am running into this same error, i have tried everything here and i have one question (might be a stupid question) but my root sd folder is called SD/, not SDCard/ ...is this a path error?
Please note it file must be in the internal card, not the SD card.
This step drove me nuts.
"2. Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/ " (http://forum.xda-developers.com/showthread.php?t=732458)
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
janthe6th said:
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
Click to expand...
Click to collapse
You definitely have an internal sd card. Use Astro file manager or something similar and put update.zip on the root of internal sd card, meaning not in a folder. It should look like sdcard/update.zip. If you are having the 3e mismatch recovery issue read this http://forum.xda-developers.com/showthread.php?t=833423
Sent from my SGH-T959 using Tapatalk 2
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
janthe6th said:
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
Click to expand...
Click to collapse
You have to reinstall packages twice for it to work properly. It is normal to not work the first time, just reinstall packages again and you should be good to go. If you keep having issues you should just flash back to stock 2.1 with Odin and go from there.
Sent from my SGH-T959 using Tapatalk 2
So I was going to root my galaxy s2 and first went into the recovery mode.
I went to locate the zip file to update through and I couldn't find it, I put the two zips needed in the main directory and when I go to recovery mode I can see my folders but not the zip files, I've checked twice.
Any help?
Solved
Sorry, I placed my two zips the internal sd but recovery was looking at external card.
My bad.
wmichael10 said:
Sorry, I placed my two zips the internal sd but recovery was looking at external card.
My bad.
Click to expand...
Click to collapse
hey dude, at least dont be a noob when ur posting.
when u have new issue's please use the same thread u have created, by just editing ur thread title, rather than creating a new thread for each of ur issue's
u know what i am trying to tell u right.
so please see to it in the future, else people who really want to help will ignore u for the same.
because creating new threads unneccessarily and spamming is against XDA rules.
I understand, Its just I found I had a diffrent issue regarding SuperSU and not finding a zip file.
But I see what you mean and will do in the future.
Hello to all, i came from Malaysia and i just got my GT-P7500, done fashing to ICS 4.0.4 running XXLQ8 stock ICS with Kernel 3.1.10..
I tried rebooting into stock recovery mode, when i choose to update flash from external storage, the system is telling me that E:/ volume not found,
/sdcard notfound.. Can somebody or anybody explain this and explain to me how to flash update..
Do i need another recovery mod or can i do it with the original stock recovery mod??
how come my post is not replied?
Someone pliss help me..
dauzcroz93 said:
how come my post is not replied?
Someone pliss help me..
Click to expand...
Click to collapse
I think the reason your post has not been answered is because we don't know exactly what you're asking. Also most answers are already posted. You just have to search and read them.
I'm not sure what you're doing myself, but I think you need to use Odin to flash CWM recovery and then use that recovery to flash ROMs, kernels, etc...
Since I really don't know what you're trying to do, you need to make sure what I said is REALLY what you need to do. By searching and reading you will find your answer.
Sent from my GT-P7510 using XDA Premium HD app
Benzoman said:
I think the reason your post has not been answered is because we don't know exactly what you're asking. Also most answers are already posted. You just have to search and read them.
I'm not sure what you're doing myself, but I think you need to use Odin to flash CWM recovery and then use that recovery to flash ROMs, kernels, etc...
Since I really don't know what you're trying to do, you need to make sure what I said is REALLY what you need to do. By searching and reading you will find your answer.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
tq very much.. right now, i'm trying to do just like u say, if it works, i'm in your debt..
what i meant was, that my android recovery system cannot detect the path to SD card, since the gt-p7500 did not have any SD Card slots, so i can't flash any .zip files from my tab.. Thanks so much..
dauzcroz93 said:
tq very much.. right now, i'm trying to do just like u say, if it works, i'm in your debt..
what i meant was, that my android recovery system cannot detect the path to SD card, since the gt-p7500 did not have any SD Card slots, so i can't flash any .zip files from my tab.. Thanks so much..
Click to expand...
Click to collapse
One of the partitions on your tablet is mounted as /mnt/sdcard (or /sdcard). You normally push files there using USB from your computer, either using "adb push" or mounting the sdcard as a media device on the computer.
Stock recovery does not let you choose a file from the /sdcard directory. I think the errors you're seeing is that the stock recovery isn't finding the files it's looking for.
You'll need to install Clockwork Mod recovery if you want to flash custom ROMs.
Galaxy Tab doesn't have an SD Card slot, so anything with external storage/mounting USB/ etc won't work in recovery. Flashing a ROM is possible because the data partition is read and treated as SD Card. If you need to add something to your tab via USB while it's in recovery, you'll need to use the Android Debug Bridge and type adb push, then the file, then the destination.
Example:
Code:
adb push rom.zip /sdcard/
I was recently given a nook tablet. It is running version 1.4.3. The only root methods I have been able to find all involve using the NT16or8gbV4_7 image and I can not find a working link to the file. Is there another way to internally root and install a recovery so that I can flash roms?
Am preparing a boot2recovery from sdcard for helping new nook tablet users install roms.
Unzip and copy everything included in this zip package to the root of a fat32 sdcard and tell me if you can boot into cwm.
http://d-h.st/ZRC
Btw this is development section and your problem belongs to q&a
demetris_I said:
Am preparing a boot2recovery from sdcard for helping new nook tablet users install roms.
Unzip and copy everything included in this zip package to the root of a fat32 sdcard and tell me if you can boot into cwm.
http://d-h.st/ZRC
Btw this is development section and your problem belongs to q&a
Click to expand...
Click to collapse
Sorry, should have put it in Q&A. Thanks for the response. If I unzip the files and copy them to my sdcard the nook still boots normally. They look like the files that are on my sdcard if I used windiskimager to write a bootable sdcard. Wouldn't I have to write stuff to the card and not just copy them over?
You must prepare the sd card for Nook compatibility booting
i bet you didn't.
If i remember well is 1st partition/70mb/fat32/named boot/and must be active.
Search around for answers or be patience until i find some time to prepare a new quide.
demetris_I said:
You must prepare the sd card for Nook compatibility booting
i bet you didn't.
If i remember well is 1st partition/70mb/fat32/named boot/and must be active.
Search around for answers or be patience until i find some time to prepare a new quide.
Click to expand...
Click to collapse
Yeah I had started to do that from one of the guides but had since re-formatted the card. Anyway I set it up as such and copied the files over. It's booting to Cyanoboot but I'm seeing "bboti: bad boot image magic (in memory)" and "Hold n for menu". Holding n does nothing.
Go into the stickies section there is a full guide with links to the files.
Sent from my LG-MS840 using xda app-developers app
Vyrus69 said:
Go into the stickies section there is a full guide with links to the files.
Sent from my LG-MS840 using xda app-developers app
Click to expand...
Click to collapse
There is only one guide in the stickies on this page and that involves using ADB and the link to the instructional video is dead. The other guides I've found required the file I mentioned above which all lead to dead links. I was hoping for a bootable SD card then installing a recovery internally to the nook so that I can flash roms directly from the recovery as I've done with many other Android devices.
I figured it out, can a mod please delete this thread? Thanks for the help guys.
Snakebear said:
I figured it out, can a mod please delete this thread? Thanks for the help guys.
Click to expand...
Click to collapse
Agreed. Somebody delete this, no offense Snakebear.
Hi people. I've been browsing a lot lately and Reading about roms, kernel, and other stuff related to customization of Android devices. I consider myself enough tech-savvy to understand technical things about hardware on this devices but when it comes to all the thing related to flashing roms and kernels and related things i have no clue of what you're talking about, lol.
However, I'm really interested on "installing" Cyanogenmod 10 on my Galaxy Player 4 just to see what happens and how flashing roms feels like, so i can try different roms later and enhance my device. But no matter how hard I try to find a tutorial about how to begin from total stock (as the device comes from the store) haven't been lucky finding one. As far as I know the first step is flashing a new kernet with CWM, so then i can flash the roms. But I'm stuck on Step One :s
So, if there's a link you can post here to help begin with this flashing trend it'd be great. Or if you can redact a "custom" tutorial for me, a total programming noob but interested as hell about modifying my GP4 that would be a thousand times better.
Also, feel free to recommend me kernels or roms or whatever you feel i could use
Thanks!!!
PD: not native english speaker
I just finished doing this exact thing myself, so its fresh in my mind First, BACK UP!! there are different methods with varying degrees of how much they back up, search the forum for them. Definitely backup the efs. Instructions are in the first post for the CM10 ROM. Then, I began by flashing a custom kernel using Odin. Instructions on how to do this can be found in the Tips and Tricks section of this post:
http://forum.xda-developers.com/showthread.php?p=27615927
Kernels can also be found in the appropriate section of that post. Make sure you get one for your device. All of them include CWM (ClockworkMod) which is what you need to easily flash a full ROM. The kernel won't actually effect your current operating system accept to maybe improve performance.
Next, download the ROM file(s) onto your device. ROMs are also in the above post. Again, make sure you get one for your device. Read the instructions in the ROM thread on how exactly to flash them, but the general procedure is to boot into CWM by holding some set of buttons during start up (probably power + volume up) and navigate the CWM menu to flash the ROM.
Sent from my YP-G1 using xda app-developers app
from stock
download odin: https://docs.google.com/file/d/0B2ZcXCdM0CVJS196MFRtaUhfSUk/edit?usp=sharing
boot into download mode
flash terra silent: http://forum.xda-developers.com/showthread.php?t=1643384
download rom and gapps: rom: http://forum.xda-developers.com/showthread.php?t=2233983 gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
put on sdcard
BACKUP!!!
flash rom and gapps
reboot
thanks a lot for the help!
Now a question... When you tell me to make a backup, what exactly should I backup and with what program or app? Installed Titanium BAckup app and all i see is the option to backup individual apps. I expected to find something like "total backup of the device" or a similar thing that bacups the whole thing...
please tell me what to use and what to do
thanks a lot again
kennethac said:
thanks a lot for the help!
Now a question... When you tell me to make a backup, what exactly should I backup and with what program or app? Installed Titanium BAckup app and all i see is the option to backup individual apps. I expected to find something like "total backup of the device" or a similar thing that bacups the whole thing...
please tell me what to use and what to do
thanks a lot again
Click to expand...
Click to collapse
Create a backup in cwm
This is so if anything goes wrong, you can get back
Sent from my Kindle Fire running CM10.1/SGT7
Ok i downloaded both Odin and the Terra Silent kernel. Samsung kies is already installed so Odin is detecting my galaxy player.
But the terra silent kernel is a zip file, if i extract it the extracted file has no extension, only says zlimage and i have no idea what it is. Then, when I open Odin, there are the next options:
PIT
BOOTLOADER
PDA
PHONE
CSC
where should i upload the zlimage?
kennethac said:
Ok i downloaded both Odin and the Terra Silent kernel. Samsung kies is already installed so Odin is detecting my galaxy player.
But the terra silent kernel is a zip file, if i extract it the extracted file has no extension, only says zlimage and i have no idea what it is. Then, when I open Odin, there are the next options:
PIT
BOOTLOADER
PDA
PHONE
CSC
where should i upload the zlimage?
Click to expand...
Click to collapse
That's because you're suppose to flash it via CWM. If it's a tar file, you flash it via Odin. And you're not suppose to extract it, lol.
TheKryptonite said:
That's because you're suppose to flash it via CWM. If it's a tar file, you flash it via Odin. And you're not suppose to extract it, lol.
Click to expand...
Click to collapse
haha ok i'm not extracting it anymore. But from those options that shows Odin, where i have to upload the "TerraSilent_usa-1.3.5" file?
This is what i see...
PIT
BOOTLOADER
PDA
PHONE
CSC
that's where i need help for the moment
kennethac said:
haha ok i'm not extracting it anymore. But from those options that shows Odin, where i have to upload the "TerraSilent_usa-1.3.5" file?
This is what i see...
PIT
BOOTLOADER
PDA
PHONE
CSC
that's where i need help for the moment
Click to expand...
Click to collapse
PDA is the one, I believe.
Is Terra Silent compatible with CM10??? Reading the thread of Terra Silent a user made a comment on this asking the developer (i guess) to make Terra Silent compatible with CM10.... :s
ok now i have some problems...
got to flash the Terra Silent Kernel. After rebooting everything was ok. Installed Rom Manager in order to install CWM. Rom Manager installed CMW and then came back to main menu. There was an option for creating a copy of the stock rom, thought it wolud be a good idea to make a copy. When i did it, phone went black and then reboted. after rebooting came back to the lock screen but changed language (spanish -> english). Algo noticed there was missing the google search bar. When entered to the apps menu there were a lot of icons of the android robot with an SD card symbol over. When clicked them it says that the apps are not installed on the system.
installed rom manager again, and went to recovery boot. flashed both cm9 and cm 10 included in the cm 10 thread. Now my playr is stuck in the recovery screen...
what do i do?
kennethac said:
ok now i have some problems...
got to flash the Terra Silent Kernel. After rebooting everything was ok. Installed Rom Manager in order to install CWM. Rom Manager installed CMW and then came back to main menu. There was an option for creating a copy of the stock rom, thought it wolud be a good idea to make a copy. When i did it, phone went black and then reboted. after rebooting came back to the lock screen but changed language (spanish -> english). Algo noticed there was missing the google search bar. When entered to the apps menu there were a lot of icons of the android robot with an SD card symbol over. When clicked them it says that the apps are not installed on the system.
installed rom manager again, and went to recovery boot. flashed both cm9 and cm 10 included in the cm 10 thread. Now my playr is stuck in the recovery screen...
what do i do?
Click to expand...
Click to collapse
Did you wipe the data, cache, and Davik cache?
TheKryptonite said:
Did you wipe the data, cache, and Davik cache?
Click to expand...
Click to collapse
Sorry. False alarm, i finally found i was doing something wrong so corrected it and now i'm using Jelly Bean in my galaxy player. But now there's another problem: system won't read the external SD card.
How can i fix this?
kennethac said:
Sorry. False alarm, i finally found i was doing something wrong so corrected it and now i'm using Jelly Bean in my galaxy player. But now there's another problem: system won't read the external SD card.
How can i fix this?
Click to expand...
Click to collapse
You internal SD card is probably switched for the external.
Find "vold.fstab. (system/etc)" open it, and change "/mnt/sdcard/sdcard1" to "/mnt/sdcard/sdcard0."
TheKryptonite said:
You internal SD card is probably switched for the external.
Find "vold.fstab. (system/etc)" open it, and change "/mnt/sdcard/sdcard1" to "/mnt/sdcard/sdcard0."
Click to expand...
Click to collapse
This is what the file shows:
#internal sdcard
dev mount sdcard / storage /sdcard0 1 /
devices/platform/s3c-sdhci.0/mmc host/mmco
#external sdcard
dev mount emmc /storage/sdcard1 auto /
devices/platform/s3c-sdhci.2/mmc_host/mmc1
what's the part that i have to edit???
kennethac said:
This is what the file shows:
#internal sdcard
dev mount sdcard / storage /sdcard0 1 /
devices/platform/s3c-sdhci.0/mmc host/mmco
#external sdcard
dev mount emmc /storage/sdcard1 auto /
devices/platform/s3c-sdhci.2/mmc_host/mmc1
what's the part that i have to edit???
Click to expand...
Click to collapse
#internal sdcard
dev mount sdcard / storage /sdcard1
#external sdcard
dev mount emmc /storage/sdcard0
Wait, before doing any changes like this, have you tried on going mnt/emmc or storage/sdcard1? @TheKryptonite he have a 4.0 and the sdcard is working without changing the paths.
Envoyé depuis mon Nexus 7 avec Tapatalk
zaclimon said:
Wait, before doing any changes like this, have you tried on going mnt/emmc or storage/sdcard1? @TheKryptonite he have a 4.0 and the sdcard is working without changing the paths.
Envoyé depuis mon Nexus 7 avec Tapatalk
Click to expand...
Click to collapse
That is the same thing four me. I did not have to switch storages at all
Sent from my Kindle Fire running CM10.1/SGT7
TheKryptonite said:
#internal sdcard
dev mount sdcard / storage /sdcard1
#external sdcard
dev mount emmc /storage/sdcard0
Click to expand...
Click to collapse
I did this change, switched numbers and now i can see the files on the sd card. Only that before flashing CM 10 the access to the sd card was through a folder calles "externa sd", now the sd card files and folders are scattered on the home screen of any file explorer i acess the sd card with. It's not a big ideal but i dont like it.
When i edited the file you told me there was a 1 after where now says sdcard 1. Shoud that number be erased or better keep it?
kennethac said:
I did this change, switched numbers and now i can see the files on the sd card. Only that before flashing CM 10 the access to the sd card was through a folder calles "externa sd", now the sd card files and folders are scattered on the home screen of any file explorer i acess the sd card with. It's not a big ideal but i dont like it.
When i edited the file you told me there was a 1 after where now says sdcard 1. Shoud that number be erased or better keep it?
Click to expand...
Click to collapse
I'd keep it.