Hello all. I have a quite big problem. After I tried to change the Baseband+Kernel on my x10 for flash a ROM, my phone doesn't want to boot.
When I turn on the phone, it simply show a green led one time and doesn't boot. Any ideas ?
Flash it back from stock room, repair with PC Companion.
Had the same problem many hours ago.
Just enter xrecovery, restore any ROM, flash a SE 2.1 ROM from SEUS or PC Companion ( Repair option ), and try again.
This time, after flashing any Ginger ROM, wait 30 sec and then flash FTF. Turn on phone and thats it.
The problem is that I can't simply boot and then I can't go to xRecovery. And Pc Companion says me that there is no version for my phone with the repair function
And flash a ROM with flashtool doesn't make anything
Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
Hi,
Last night, i tried to root my Xperia x10i phone, following the steps in this article:
http://forum.xda-developers.com/showthread.php?t=711907
After completing the 1st step, i tried to boot my phone. I get the usual vibration when booting, and after a second or two, the phone had started vibrating endlessly.
Then i tried to recover it using PC Companion (Connected in flash mode). It downloaded the firmware and installed it to the phone flawlessly.
I disconnected the phone, in switch on. Get the usual vibration, and then the screen backlight starts to turn on and off constantly. As the PC Companion says this could happens for a few minutes at first boot after update, i waited, but it simply remains doing the same thing, and never show the SE logo.
I tried to repair again, this time using SEUS, following all the instruction, with same result.
I dont know what else can i do... Please Help!!!
this will help you http://www.youtube.com/watch?v=HmX-IYNYqL8
You mean try to flash it to 2.1? Or to 1.6?
flash it to 2.1
Ok. I've just tried to flash with a 2.1 x10i generic rom and a 2.3 x10i generic rom, following the steps in the video. Dont work...
hmm.. weird, any1 can help here?
Yesterday, i left the phone in the office, with the battery out, hoping that something i read in a forum, about this could work, was true. Today i take the phone, put the battery back, and turn on the phone, and... No luck... My xperia is still dead...
Try using SEUS instead of PC Companion.
Follow the instructions ins SEUS and make sure that the phone is off and hold down the BACK button before you plug in the USB cable and make sure you keep it pressed down until the software tells you otherwise.
I've done so, but still dont work... But i'll try again...
I've just tried with SEUS, which download the 2.3 update. SEUS run all the way, and says disconect and turn on. Same result...
Any sugestion?? I almost give up on this... =(
I have the same problem, i have tried to flash my phone like 30 times i have bought a new battery and still no go, it continuasly vibrates.
And i don't even have to pres the back button to put it to flash it always on startup stayes in flash mode.
i hv diff problem , i m stuck on sony ericsson text phn isnt even booting
nw
i hv tried this one and tbhaaanmmmmm ITS FINE NOW
http://forum.xda-developers.com/showthread.php?t=1196421&highlight=root+2.3.3
Nope done that and nothing it only vibrates and doesn't stop
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
lounger64 said:
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
Click to expand...
Click to collapse
Can you still access xrecovery at all?
If not, what can you when you try to flash something via flashtool?
Did you try PC Companion instead?
Flash the stock SE firmware (I would recommend the 2.3.3 one to save yourself trouble) from Flashtool. If that doesn't work, you're pretty much screwed.
DL firmware from here : http://forum.xda-developers.com/showthread.php?t=920746
Best option is given by Panzerfaust101
Another option is as follows:
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs, install the latest firmware and then try accessing Xrecovery.
Its should do the trick!!
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA
I'm running cobrato's miui rom with his modified version of doomlord's fully over clocked kernel.
The problem is, when I hold down the power button to turn it on, nothing happens. The same thing if I pug it into a charger or my computer. I can get it into flash mode and I tried flashing a new kernel but when it flashes the loader it gets stuck at 13%. I also tried flashing stock 2.3 firmware but again, flashtool can't flash the loader.
letterman12 said:
I'm running cobrato's miui rom with his modified version of doomlord's fully over clocked kernel.
The problem is, when I hold down the power button to turn it on, nothing happens. The same thing if I pug it into a charger or my computer. I can get it into flash mode and I tried flashing a new kernel but when it flashes the loader it gets stuck at 13%. I also tried flashing stock 2.3 firmware but again, flashtool can't flash the loader.
Click to expand...
Click to collapse
did you try restore from PC companion or SEUS?
^ true that
Try using SEUS to repair your phone, sometimes when everything else seems to fail, surprisingly the one thing we've always ignored, actually works !!
I did try that. It keeps saying, "There's no new software for your phone. Please try again later."
Hi, so your phone coulb be save...
You may need to reinstall the stock rom and start your config again...
In PC Compagnion (I think SEUS doesn't work again)
Go to SUPPORT ZONE / UPDATE PHONE / REPAIR PHONE...(I'm not sure it's exactly the same words because it's in french language for me..)
I hope it solved your problem or someonelse idea, because no news...
Sent from my X10 using XDA