[GUIDE] Workaround To Fix Wireless Tether - HTC EVO 3D

This has been one problem that's plagued me with both the Evo 4G and now the 3D. Barnacle works but makes the internet painfully slow(er) and Wireless Tether for Root works on 4G but not 3G. Well, I finally figured it out. I'm not going to go into the details because I'm not quite sure I understand exactly what it's doing yet, but it comes down to Sprint's MTU and the tether apps expecting it to be something other than it is. All that is needed to fix it is to double the MTU from 1472 to 2944, and for whatever reason Wifi Tether will start acting right again. One side effect of this is that your ping will go up by about 20-40% but it may also help increase your download speeds ever so slightly too.
First you'll want to download the latest wifi tether from either the market or their site here.
Once you have that installed you'll want to open up an adb shell and, as root, type: setprop persist.data_netmgrd_mtu 2944
After that is set, toggle airplane mode on and off so that it uses the new value.
Next open Wifi Tether and go to Menu -> Settings -> enable Routing Fix
And that's it, wifi tether should work at full speed and the settings will stick with you after reboots. The value is originally set from the build.prop but as long as you don't wipe your data partition it should last.

xHausx said:
This has been one problem that's plagued me with both the Evo 4G and now the 3D. Barnacle works but makes the internet painfully slow(er) and Wireless Tether for Root works on 4G but not 3G. Well, I finally figured it out. I'm not going to go into the details because I'm not quite sure I understand exactly what it's doing yet, but it comes down to Sprint's MTU and the tether apps expecting it to be something other than it is. All that is needed to fix it is to double the MTU from 1472 to 2944, and for whatever reason Wifi Tether will start acting right again. One side effect of this is that your ping will go up by about 20-40% but it may also help increase your download speeds ever so slightly too.
First you'll want to download the latest wifi tether from either the market or their site here.
Once you have that installed you'll want to open up an adb shell and, as root, type: setprop persist.data_netmgrd_mtu 2944
After that is set, toggle airplane mode on and off so that it uses the new value.
Next open Wifi Tether and go to Menu -> Settings -> enable Routing Fix
And that's it, wifi tether should work at full speed and the settings will stick with you after reboots. The value is originally set from the build.prop but as long as you don't wipe your data partition it should last.
Click to expand...
Click to collapse
xHausx, I followed your directions and now wireless tether works on both 3G and 4G. However, I now have a wakelock issue. I uninstalled wireless tether and the wakelock issue is gone. Reinstall wireless tether, do your method, and then wakelock issue is back.
Phone has only stock applications plus wireless tether. Using stock ROM and kernel. Any ideas?

Haus, check out my thread weird way to get wireless tether ... Maybe it can help you figure out what's going on.
Sent from my PG86100 using Tapatalk

This did work for me, but... I'm not sure you've found all the issues just yet. I ran about a dozen speed tests from speedtest.net and WiFi Tether seems very inconsistent and slow. Barnacle on the other hand is fast and smooth. I'm in a fringe area and Barnacle gives me 400k to 500k speed that is quite consistent. WiFi Tether on the other hand, while it does now work with this workaround, is about 100k up and down and it is very inconsistent and it stalls a lot. I'll stick with Barnacle for now because it seems to work well with no issues.
Mike

mikeyxda said:
This did work for me, but... I'm not sure you've found all the issues just yet. I ran about a dozen speed tests from speedtest.net and WiFi Tether seems very inconsistent and slow. Barnacle on the other hand is fast and smooth. I'm in a fringe area and Barnacle gives me 400k to 500k speed that is quite consistent. WiFi Tether on the other hand, while it does now work with this workaround, is about 100k up and down and it is very inconsistent and it stalls a lot. I'll stick with Barnacle for now because it seems to work well with no issues.
Mike
Click to expand...
Click to collapse
My only problem with barnacle is my tablet doesn't see it when its on...
Sent from my PG86100 using Tapatalk

Wifi-tether 3.0 pre-14 works fine for me with 3G without changing a thing...can't test 4G since its not available.
Sent from my PG86100 using XDA App

pre-14 with this works great over 4g, seems nicely sped up. Thanks Haus

My phone is S-Off and I have root, but for some reason why I go to "adb shell" it gives me "$" instead of "#". Also, "su" says permission denied. How to run adb shell as root?

xHausx said:
This has been one problem that's plagued me with both the Evo 4G and now the 3D. Barnacle works but makes the internet painfully slow(er) and Wireless Tether for Root works on 4G but not 3G. Well, I finally figured it out. I'm not .
Click to expand...
Click to collapse
This is great find. But are you running AdHoc or AD.
After this workaround I still can't get Wifi Tether to work. It connects gets IP address slowy on client and then just sits there. Data won't transfer.
The Sprint Hot Spot works fine on 3G, but I didn't test it for speed.

MXPS said:
My phone is S-Off and I have root, but for some reason why I go to "adb shell" it gives me "$" instead of "#". Also, "su" says permission denied. How to run adb shell as root?
Click to expand...
Click to collapse
flash su binary from recovery

Did anyone get this work around to work?
If so are you running Ad-Hoc or AD?
Does it work on both 3G and 4G?

Here is a flashable zip made by JoelZ9614. It unlocks the stock hotspot (shows up as a router, not ad-hoc) and unlocks 3D sense homescreen. Works on 3G and (reportedly) 4G.

xhaux,
Thanks for this, preliminary testing shows it works. I would suspect that Barnacle does something similar? What made you choose the MTU value you chose?

Yo haus anyway us devs can iimplement this into our roms?
Sent from my PG86100 using XDA App

flashable zip -- 4g does not work. gives error not subscribed

mikebgb12 said:
flashable zip -- 4g does not work. gives error not subscribed
Click to expand...
Click to collapse
thanks for letting me know, what rom are you on?

im on shooters right now. ive tried it on 4 different roms now. 4g will not work natively on sprint's hotspot. 3g works fine. would love for some1 crack this lol

mswlogo said:
Did anyone get this work around to work?
If so are you running Ad-Hoc or AD?
Does it work on both 3G and 4G?
Click to expand...
Click to collapse
Well, works for me.
I haven't tried it on 4G yet but ad hoc & infrastructure work fine.
jnyer27 said:
xhausx,
Thanks for this, preliminary testing shows it works. I would suspect that Barnacle does something similar? What made you choose the MTU value you chose?
Click to expand...
Click to collapse
I believe Barnacle probably sets it to the usual default of 1500. If you set it to that wifi tether will work but it is painfully slow(er). I just doubled the E3D's default and hoped it would be the right size when the packets got fragmented(split into smaller chuncks). If someone has the time to play around with it some youthey could probably find a better MTU that would allow for even better speeds.
clark44 said:
Yo haus anyway us devs can iimplement this into our roms?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
For sure, it is originally set in the build.prop and once set the value is, IIRC, saved under /data/system.

starkillers said:
Haus, check out my thread weird way to get wireless tether ... Maybe it can help you figure out what's going on.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I think Barnacle changes this setting to 1500 by default, which works but is an extremely inefficient setting to use on Sprint's 3G. Hence why it is so slow.
mswlogo said:
This is great find. But are you running AdHoc or AD.
After this workaround I still can't get Wifi Tether to work. It connects gets IP address slowy on client and then just sits there. Data won't transfer.
The Sprint Hot Spot works fine on 3G, but I didn't test it for speed.
Click to expand...
Click to collapse
It's still using the stock MTU then. I'm pretty sure what's happening is the data's being lost in a PMTUD black hole. It'll work when transferring small amounts of data but when you start using more bandwidth it gets flooded with error messages and starts ignoring you.
Check to see if it's changing it by replacing setprop with getprop, if it did set correctly try rebooting your phone or turning airplane mode on and off.

Encryption?
I've got the 3.1 beta2 installed and did this tweak. Wifi tether works fine for me with encryption disabled. But with it enabled, I can't get internet access. I'm sure I'm using the right passphrase and my laptop connects to tether. But I can't get data. Barnacle tether works fine for me with wep enabled. Any suggestions? Thanks!

Related

Working Wireless Tether?

Anyone know which wireless tether app works with the temp root? I've tried a few and a no go.
I've seen claims of barnacle working, but have yet to try it myself.
hockeyfamily737 said:
I've seen claims of barnacle working, but have yet to try it myself.
Click to expand...
Click to collapse
Barnacle works perfect. Thank you, and I hit your Ty button.
It can't stay connected though, since root is temp, correct?
Sent from my Evil 3D using XDA App
I have Barnacle wifi tether running on my 3D with temp root. Works great, but yes it is temporary for now.
If the wireless part isn't necessary, pdanet works just fine without root.
-----
Ride to the sound of the guns!
1st Brigade, 2nd Infantry Division
Second to None!
I can temp root with no problems using my MacBook Pro and Fre3vo but no wireless tethering joy for me. Wireless Tether doesn't work at all. Barnacle gives no errors with the ad hoc connection, everything looks fine, even Snow Leopard's network diagnostics say that my internet is working fine, but no data is transmitted or received. I even tried all the tips/tricks in this thread, still no joy. Any suggestions?
PdaNet works ok with USB but is very unstable with Bluetooth.
BTW I had no problems at all with the EVO 4G either in ad hoc mode (early versions of Wireless Tether) or non ad hoc (whatever that's called, recent versions of WT).
I've tried most of the methods out there and the one in this thread has the highest success rate IMO. One important thing: check your apps and if you have "Super User" installed as an app, uninstall it first before trying the method in that thread.
Barnacle works perfectly for me under that setup.
Mike
I have the same issue. I also have a mac so it might be a mac issue. I get tether to work on my wifes shift so I know my computer works.
bobodobo said:
I can temp root with no problems using my MacBook Pro and Fre3vo but no wireless tethering joy for me. Wireless Tether doesn't work at all. Barnacle gives no errors with the ad hoc connection, everything looks fine, even Snow Leopard's network diagnostics say that my internet is working fine, but no data is transmitted or received. I even tried all the tips/tricks in this thread, still no joy. Any suggestions?
PdaNet works ok with USB but is very unstable with Bluetooth.
BTW I had no problems at all with the EVO 4G either in ad hoc mode (early versions of Wireless Tether) or non ad hoc (whatever that's called, recent versions of WT).
Click to expand...
Click to collapse
Sent from my Overclocked Evo 3D using tapatalk. :-D
Found this and I am tethering now:
http://therootofallevo.com/forums/viewtopic.php?f=8&t=100
Thanks, the version of wireless tether mentioned in the linked post worked for me and I'm posting using it! I had tried every other version of WT on the google site, and every version of Barnacle I could find, none worked.
BTW I didn't have any error messages or have to change any settings as that page suggests, it just worked the first time.
This is the only version of WT that starts without errors for me, and I have to us WT as it can set up the softap network (Asus Transformer doesn't see ad-hoc). It sees it and connects, but can never get an IP Address.
Anyone else experience a similar issue?
How I got it running......
1. Get temp root by one of the methods in the forum
2. Download the wifi tether apk from the root/FAQ thread.
3. In the settings change profile to htc evo 4g
4. In settings apply check to box to fix HTC routing.
Wifi tether should restart and you should be in business.
sent from the HTC evo 3d
dutchman71 said:
Found this and I am tethering now:
http://therootofallevo.com/forums/viewtopic.php?f=8&t=100
Click to expand...
Click to collapse
Yup that's worked perfectly......thanks for the info......my Acer I is blazing right thru now.....good stuff bro
Sent from my A500 using XDA Premium App
Just got it working on My Coworkers 3vo. download wifi tether 3.2 from the web, then go into settings and there is a setting in the menu that says enable for htc devices, once I did that it worked like a charm.
**Note** you need temp root
detcup4evr said:
Just got it working on My Coworkers 3vo. download wifi tether 3.2 from the web, then go into settings and there is a setting in the menu that says enable for htc devices, once I did that it worked like a charm.
Click to expand...
Click to collapse
You mean this version, 3.1 beta 2? I've tried all the versions out there and some work perfectly some of the time, some never work, but none work all of the time. Can't figure out what changes, it's so random. I'm using the 3.1 beta 2 version to write this, but yesterday it didn't work and tomorrow I predict it won't work. BTW every time I start this version I get an error/warning message that some necessary thingamajigs aren't there, but I dismiss the message and it works anyway.
And of course I know I have to re-root after every restart etc.
works sporactically
Both Barnacle Wifi Tether and Andriod Wifi Tether work sporadically for me. It worked a few days ago and now it doesn't work.
is 4g tether working? I could not get it to work using barnacle
Barnacle works perfect for me with 4G...I haven't had one problem with it...
Supposedly, a beta version of "Wireless Tether for Root Users" worked so long as you checked a box in the settings that was specific to HTC devices. I forget where there.

Which wireless wifi tether/hotspot app do you use?

I've only had success with using my phone as a wifi hotspot with the Miks Rom, every other rom that I use, I've tried Barnacle, Wireless Thether for Root users and just about every other app available on the market but nothing works.
Which rom are you guys using and what wifi hotspot app works? Thanks!
orthopak said:
I've only had success with using my phone as a wifi hotspot with the Miks Rom, every other rom that I use, I've tried Barnacle, Wireless Thether for Root users and just about every other app available on the market but nothing works.
Which rom are you guys using and what wifi hotspot app works? Thanks!
Click to expand...
Click to collapse
Go here http://code.google.com/p/android-wifi-tether/downloads/list
Use the first one on the list, beta 5. Beta 4 works too. I've had success with beta 4 on all roms I've used. Good luck.
Sent from my PG86100 using Tapatalk
Awesome, got it to work on the first try with the Supra Rom.
orthopak said:
Awesome, got it to work on the first try with the Supra Rom.
Click to expand...
Click to collapse
Good deal! Forgot to mention that usually you need to check off 'routing fix' and 'mms clamping' in the settings of the wireless tether app. Not sure if you already got that or not, but if you run into any issues, keep that in mind.
For me those apk's only work on 4G, never on 3G. Any idea what am I doing wrong?
(Yes I've tried checking and unchecking the Routing Fix and MMS Clamping (whatever that is) 100 times. And I've tried using "automatic" device selection vs. selecting the EVO 3D. And tried using DNS servers other than the default ones. Always the same result, no tethering with 3G.)
bobodobo said:
For me those apk's only work on 4G, never on 3G. Any idea what am I doing wrong?
(Yes I've tried checking and unchecking the Routing Fix and MMS Clamping (whatever that is) 100 times. And I've tried using "automatic" device selection vs. selecting the EVO 3D. And tried using DNS servers other than the default ones. Always the same result, no tethering with 3G.)
Click to expand...
Click to collapse
I just got home from NYC and on the bus I was tethering via 3G the whole time.
The routing fix: on
MSS Clamping: on
Device profile: HTC Evo 3D
WiFi Tether version 3.1 b5
I even had WPA2 encryption on so others couldn't steal my bw...
Worked fine the whole ride, even when it would drop to 1x due to coverage areas.
Hmmm... didn't work for me, I'm using the same version of WiFi Tether, I've tried that group of settings many times and tried them again just now. Same issue: 4G joy, 3G no joy.
Soooo... I gave WiFi Tether some tough love... While I've uninstalled and re-installed it many times with no joy, this time I cleared data (via Menu / Settings / Applications / Manage applications / WiFi Tether / Clear data) BEFORE uninstalling WiFi Tether. Then after re-installing, now it's working on 3G or 4G... I can switch 4G on and off multiple times and it all works. I'm not terribly optimistic that it will continue to work on 3G, but at least I know one way that it DID work and hopefully I could get it to work again if it fails... thanks for the help.
Any clue as to a bluetooth tether?
I understand that WiFi is faster but Bluetooth is cheaper on battery life.

4G WiFi Tether Infrastructure Mode Workaround

Credit goes to colestein on androidcentral for this. Figured id post it here since i haven't seen it anywhere here on XDA.
I'm using WiFi Tether 3.1 beta 6
Download the Data Enabler widget from the Market
Setup Wifi Tether as Nexus One, netd, mms clamping enabled
Use Data Enabler to shut off 3g
Start tethering
once tethering is started, enable 4g
You should have a consistent 4G signal and the benefits of infrastructure mode!
Has anyone tried this and gotten it to work? Im completely functional except my phone reboots once every 2 hrs or so...
I have 3 questions about wireless tether. Currently have it set up in infrastructure mode, and it is working great. I have wake lock on, not disabled because if the screen went to sleep, the connection would drop.
Wifi Tether profile is set up as Nexus One, netd enabled.
Here are my 3 questions.
1. When I enable wifi tether, the sprint tether icon appears in the taskbar. The software works, and I tether fine, but am I now registering tethering with the sprint network?
2. I do not have mms clamping enabled, What does it do, and should I have it enabled?
3. What does the enable routing fix option do?
This is working for me as well
Thanks!!
Sounds good, I look forward to testing this once I receive my Photon.
We have a similar fix like this for the Epic4G in that forum, but it's much more complicated and involves editing the framework.jar of the ROM.
Since 99% of tethering apps are filtered on the market for our phones, thanks to Sprint, a post to the file or an attachment of it would probably benefit the users of it in a greater capacity.
By the way folks, even though he isn't the creator of this workaround, the OP usually deserves a little thanks...
Worked for me in 3g. Very fast. I also get the tethering or mobile hotspot active (sprint mobile hotspot) but I just ignore it.
BTW, how is battery for most while plugged into the computer usb for charging while tethering. Mine can't keep up with the drain from the phone.
Does this only work for a ROOTED MoPho?
keen77 said:
Does this only work for a ROOTED MoPho?
Click to expand...
Click to collapse
Yes. In order to use any tethering app, except the stock one, you need to be rooted.
ArchangelRenzoku said:
Yes. In order to use any tethering app, except the stock one, you need to be rooted.
Click to expand...
Click to collapse
Nope. you can use PDA-Net to tether an Non-Rooted phone via USB.
Woah! Awesome. Is PDA-Net an App or pls explain?
EDIT: NVM, found it. Can't believe the Market would allow such an App... thanks guys!!
Im using 3.0. I installed it. Then installed data enabler widget. Turned off 3g started 4g. Switched tether to nexus one/netd. Started tether. Should have error. Restarted tether. 4g infrastructure, Worked great. Figured it out this morning. No sprint popup in status bar either. Running netflix great through ps3.
Sent from my MB855 using XDA App
Glad to see it's working for others as well! Sorry for not posting links. You can get WiFi Tether here:
http://code.google.com/p/android-wifi-tether/
There's a new version just released on 11/27/11, im gonna test it and see if it changes behavior in any way.
Data Enabler you can easily get from the market.
My phone still reboots every 2 or 3 hrs while tethering in infrastructure mode, not sure how to fix that
usmcnyc said:
Glad to see it's working for others as well! Sorry for not posting links. You can get WiFi Tether here:
http://code.google.com/p/android-wifi-tether/
There's a new version just released on 11/27/11, im gonna test it and see if it changes behavior in any way.
Data Enabler you can easily get from the market.
My phone still reboots every 2 or 3 hrs while tethering in infrastructure mode, not sure how to fix that
Click to expand...
Click to collapse
It is not getting too hot is it?
CCallahan said:
It is not getting too hot is it?
Click to expand...
Click to collapse
No, nowhere near as hot as my Evo used to get when i tethered it...
Mine reboots randomly too but its not a big deal.
Sent from my MB855 using XDA App
My first reboot ever was with wifi tether. I've always used open garden before but it only supports ad hoc and never had a random reboot. I think it might be the app.
usmcnyc said:
Credit goes to colestein on androidcentral for this. Figured id post it here since i haven't seen it anywhere here on XDA.
I'm using WiFi Tether 3.1 beta 6
Download the Data Enabler widget from the Market
Setup Wifi Tether as Nexus One, netd, mms clamping enabled
Use Data Enabler to shut off 3g
Start tethering
once tethering is started, enable 4g
You should have a consistent 4G signal and the benefits of infrastructure mode!
Click to expand...
Click to collapse
Thanks for the workaround. Works nice.
Sent from my MB855 using xda premium
The new tether works just fine
Sent from my MB855 using XDA App
No 4G in my area. Still trying to find an infrastructure fix for 3G (non-bluetooth).
CCallahan said:
No 4G in my area. Still trying to find an infrastructure fix for 3G (non-bluetooth).
Click to expand...
Click to collapse
This should still work for you, just dont turn on 4G and keep 3G on...then use WiFi Tether with the indicated settings...

WiFi Tether Confirmed to work on HTC unlock?

Title says it all. I can't locate the WiFi Tether app on here. Any help would be appreciated.
I just read Wireless Tether 2.0.7 works on the Rezound. I'm at work so I cannot try it though...search google and you'll find it.
Wireless Tether 2.0.7 did not work for me. Nor did 3.1 Beta 9. The SSID of the Tether is not broadcast, and manually creating a profile connecting to hidden SSID doesn't make a connection either.
In Titanium Backup I see an app called "TetheringGuard 2.3.4", but freezing or uninstalling it makes no difference.
md303 said:
Wireless Tether 2.0.7 did not work for me. Nor did 3.1 Beta 9. The SSID of the Tether is not broadcast, and manually creating a profile connecting to hidden SSID doesn't make a connection either.
In Titanium Backup I see an app called "TetheringGuard 2.3.4", but freezing or uninstalling it makes no difference.
Click to expand...
Click to collapse
tetheringguard is on my phone and my wifi tether works. yours does too. TetheringGuard only seems to have effect on the verizon wifi hotspot app (if you delete tetheringguard, the hotspot app stops working). Whatever device youre trying to see the SSID with doesnt like ad-hoc connections and thats the only way the app works on the rezound right now. Either that or you tried turning on encryption, in which case, just turn it off and run it open. It does work though, I've used it plenty to tether my fiance's Ipad2.
Anyone try the open garden tethering app in the market?
Sent from my ADR6425LVW using XDA App
Just tried open garden from the market and it works perfectly!
Sent from my ADR6425LVW using XDA App
Conduitz said:
tetheringguard is on my phone and my wifi tether works. yours does too. TetheringGuard only seems to have effect on the verizon wifi hotspot app (if you delete tetheringguard, the hotspot app stops working). Whatever device youre trying to see the SSID with doesnt like ad-hoc connections and thats the only way the app works on the rezound right now. Either that or you tried turning on encryption, in which case, just turn it off and run it open. It does work though, I've used it plenty to tether my fiance's Ipad2.
Click to expand...
Click to collapse
Ahh, encryption doesn't work... I haven't tried wide-open mode yet. Thanks!
I don't like unencrypted, but when I need 35 megabit LTE connectivity out on the road I guess beggars can't be choosers!
md303 said:
Ahh, encryption doesn't work... I haven't tried wide-open mode yet. Thanks!
I don't like unencrypted, but when I need 35 megabit LTE connectivity out on the road I guess beggars can't be choosers!
Click to expand...
Click to collapse
hoping they update it as well. Hate seeing random scrubs on my ACL when I go to places without free wifi. I'll take what I can get for now though!
Hehe, I spent 58 days consulting on-site for a security company, it was hilarious how many people were trying to get into my Incredible's tether every day.
It doesn't work for me just stays on obtaining IP address
I use wifi-tether 3.1 beta 7 with mss clamping and routing fix enabled.
I also just decompiled with 4G hotspot and saw that you have to register with Verizon in order to activate 4G hotspot. There's a ton of checks in there.

Wifi Tethering?

I've heard that Foxfi doesn't work with the Droid DNA--is there any way to use turn this device into a mobile hotspot without having it pre-included in my data plan?
This is my first smartphone; I've been using my Nexus 7 and a dumb phone for the past few months now, and I felt I should upgrade to a smartphone since I'm not living on campus anymore. This seems like a great phone in and of itself, but I'd still like the option to tether my tablet. Any suggestions?
As long as you are rooted, you can use WiFi Tether For Root Users (yellow WiFi bars picture) and it will tether just fine. You won't need to include tethering in a data plan to use it.
Sent from my HTC DNA.
BigRed35m said:
As long as you are rooted, you can use WiFi Tether For Root Users (yellow WiFi bars picture) and it will tether just fine. You won't need to include tethering in a data plan to use it.
Sent from my HTC DNA.
Click to expand...
Click to collapse
BigRed is right. Works great! Also, check these settings:
Device-Profile: Generic ICS/JN (wlan0)
Setup-Method: Auto
WiFi-driver reload: Checked
Routing fix: Checked
rfarrah said:
BigRed is right. Works great! Also, check these settings:
Device-Profile: Generic ICS/JN (wlan0)
Setup-Method: Auto
WiFi-driver reload: Checked
Routing fix: Checked
Click to expand...
Click to collapse
Thanks, using these settings, WiFi Tether working perfectly as expected!
rajuabju said:
Thanks, using these settings, WiFi Tether working perfectly as expected!
Click to expand...
Click to collapse
How about the built-in android tethering application, does that work after rooting?
latebeat said:
How about the built-in android tethering application, does that work after rooting?
Click to expand...
Click to collapse
Have not tried. I like WiFi Tether a lot more
paintyourxtarget said:
I've heard that Foxfi doesn't work with the Droid DNA--is there any way to use turn this device into a mobile hotspot without having it pre-included in my data plan?
This is my first smartphone; I've been using my Nexus 7 and a dumb phone for the past few months now, and I felt I should upgrade to a smartphone since I'm not living on campus anymore. This seems like a great phone in and of itself, but I'd still like the option to tether my tablet. Any suggestions?
Click to expand...
Click to collapse
unless you have unlimited you dont need to pay for it in your data plan, they cant charge twice for limited data
rajuabju said:
Have not tried. I like WiFi Tether a lot more
Click to expand...
Click to collapse
Yeah but that's one more app running in the background. If you have that feature built in the os why not run the native app IF it works? That's why I'm asking... does it work?
latebeat said:
Yeah but that's one more app running in the background. If you have that feature built in the os why not run the native app IF it works? That's why I'm asking... does it work?
Click to expand...
Click to collapse
It only runs in the background if you have it turned on and you are using it, just like any stock app.
Wow....I cant seem to get wifi tether working. Have all the settings checked properly. Wlan0, routing fix, auto,....It starts with errors. Looking at the log all are red but three. Any suggestions?.....and no i cant use built in app....unlimited data i have...thanks in advance...
Sent from my Droid DNA using xda premium
I am seeing exactly the same issue. Numerous errors on starting, unable to tether. Or more precisely, other devices can see the hotspot and tether to it, but do not get Internet access.
My main problem is that my phone will show up as a device instead of a router (like it used to on my OG Incredible), thus not allowing other phones or tablets to connect to it because they don't see the connection. Laptops work find though. I use "wireless tether for root users" with the green signal symbol and not the newer version because the new one doesn't show the data speeds and total data used in the app.
I am using the latest yellow version and both my Galaxy Note and Lenovo laptop tether to it but do not get Internet access.
sorry for jumping on old post.
Just wondering. On my moto droidbrazr maxxbi did an sqlight hack to bypass the entitlement check and was able to use the stock hotspot app even though i was on unlimited data. Would a similar work around work for dna?
Here are the settings that are working for me on ViperDNA 1.1.2
WiFi Tether 3.3-pre2
Device Profile: HTC Rezound
Setup Method: Netd-Ndc (MASTER)
WiFi Driver Reload: Checked
Keep Alive-Connection Check: Checked
Routing Fix: Checked
https://www.dropbox.com/s/3lpeetyod11rn5a/wifi_tether_v3_3-pre2.apk
Solution WiFi Tether_HTC DNA
Just enabled my WiFi Tether I am using WiFi Tether 3.2-beta2 with ROM Super Stock v1.0106.605.4 http://http://forum.xda-developers.com/showthread.php?t=2565190
Searched YouTube and found..http://www.youtube.com/watch?v=AF77Pk-nZng Followed his steps and I'll be it worked!
LOL for anyone still using the DNA, I just installed NuSense Six and FoxFi works perfectly - not ad-hoc, full infrastructure mode, so it will work with devices other than PCs.
morpheousrx said:
Wow....I cant seem to get wifi tether working. Have all the settings checked properly. Wlan0, routing fix, auto,....It starts with errors. Looking at the log all are red but three. Any suggestions?.....and no i cant use built in app....unlimited data i have...thanks in advance...
Sent from my Droid DNA using xda premium
Click to expand...
Click to collapse
I'm using all stock roms (I was s-off and flashed stock recovery, grabbed OTAs, flashed TWRP recovery). I installed SuperSU & BusyBox than was able to tether using Barnacle Wifi Tether~ it gave me an error for adhoc but I was able to click associate and use my 4g on an iPad.(Also checked external IPs & ran speedtests to confirm it was using 4G)
Not working for me. It gets stuck at "please wait while starting". And just spins. I can back out of it but nothing good happens.

Categories

Resources