Well I did some research and I hope I could explain how to un-brick your Flyer/HTC View..
Step 1: Do not freak out!
Step 2 Click here to download your Stock Rom
Step 3 Put your tablet it in recovery. By pressing down the Power button and the Vol Down button. While you have your USB plug to your PC
Step 4 Download adb file
Once you DL extract the file to your desktop.
Step 5,6,&7
Code:
cd C:\adb
Code:
adb devices
Code:
adb reboot oem-78
^^^This will make your Tablet Run RUU exe files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 8 Click and Run your Rom for your tablet. This will take 10-15 mins.
<--- HTC View ( Express )
Step 9 You could open your eyes and your Tablet is unbrick.
Please forgive me for a sloppy way to explain but these are the steps to get your tablet to un brick. Plus I am not responsible WHAT SO EVER!!! Just trying to help
Technically there is no way to unbrick a device, because for a device to be truly bricked it has to be completely unusable, no recovery no nothing. Who cares about technicalities though, good job, I'm sure this will help someone down the road!
andmaf said:
Technically there is no way to unbrick a device, because for a device to be truly bricked it has to be completely unusable, no recovery no nothing. Who cares about technicalities though, good job, I'm sure this will help someone down the road!
Click to expand...
Click to collapse
That's true, at most this fixes a semi-brick. Some people consider it a brick, if there is no way to brick it back to life, without opening up the device.
How about some explanation of how you semi-bricked your Flyer/View? Trying to root, what step you got stuck on, etc. What were the symptoms? Stuck on boot splash screen, etc.
But thanks for posting.
redpoint73 said:
That's true, at most this fixes a semi-brick. Some people consider it a brick, if there is no way to brick it back to life, without opening up the device.
How about some explanation of how you semi-bricked your Flyer/View? Trying to root, what step you got stuck on, etc. What were the symptoms? Stuck on boot splash screen, etc.
But thanks for posting.
Click to expand...
Click to collapse
I was stuck on HTC logo, it took me 3 hours how to figure out. Again for noobs like myself we do call brick because we don't know what to do....
andmaf said:
Technically there is no way to unbrick a device, because for a device to be truly bricked it has to be completely unusable, no recovery no nothing. Who cares about technicalities though, good job, I'm sure this will help someone down the road!
Click to expand...
Click to collapse
Thanks for your input, then again there are noobs like myself.
You should be able to take the same RUU file and rename it to PG41IMG.zip, place it on the root of the sdcard, then boot into bootloader, and it will automatically check for the file and ask if you want to install. Does the same as what the OP does but with no ADB required.
***DO NOT*** leave this PG41IMG.zip on your sdcard. If you get caught in a bootloop or something similar it will prevent you from getting to recovery. Once hboot detects that file it only lets you choose install or reboot. So you can't select recovery without removing/renaming the file.
Sent from my HTC Thunderbolt
JBO1018 said:
You should be able to take the same RUU file and rename it to PG41IMG.zip, place it on the root of the sdcard, then boot into bootloader, and it will automatically check for the file and ask if you want to install. Does the same as what the OP does but with no ADB required.
***DO NOT*** leave this PG41IMG.zip on your sdcard. If you get caught in a bootloop or something similar it will prevent you from getting to recovery. Once hboot detects that file it only lets you choose install or reboot. So you can't select recovery without removing/renaming the file.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
I had tried that, that didn't work.
CuzinBucksBx said:
I had tried that, that didn't work.
Click to expand...
Click to collapse
You must have made a mistake.
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1175589
When you download it on a windows pc, if the pc is setup to NOT show file extensions, and you name it .zip the file will end up being named PG41IMG.zip.zip causing it to fail. That is the most common reason for it to fail. It is also case sensitive, and MUST be on the root of the sdcard, not on any folders.
P-G-4-1-I-M-G
It works on basically every HTC Android device ever made and has worked on this particular one for other people.
Sent from my HTC Thunderbolt
CuzinBucksBx said:
I was stuck on HTC logo, it took me 3 hours how to figure out. Again for noobs like myself we do call brick because we don't know what to do....
Click to expand...
Click to collapse
Still didn't answer all my questions. What step, or what were you trying to do when you got stuck on the boot splash? Add this info to the OP, so people know what situation this "How To" is applicable for.
And its not a brick, just because you didn't know what to do.
Please! Help!!!!
I am stuck in the boot loader! no way to reboot the phone
I tried to install on the sd card PG41IMG.zip but the phone after something similar to an installation didn't reboot!!!
help help help!!!!
viskas said:
I am stuck in the boot loader! no way to reboot the phone
I tried to install on the sd card PG41IMG.zip but the phone after something similar to an installation didn't reboot!!!
help help help!!!!
Click to expand...
Click to collapse
There isn't an option to reboot that you can scroll to with the volume buttons and select with the power button??
If it did install the RUU you would have seen it saying stuff about unpacking and such on the screen, and a litle progress bar usually in the upper right hand corner tho it could be placed differently on a tablet. Either way after it install an RUU the only thing you should be able to do is press power to reboot.
Sent from my HTC Thunderbolt
Does this upgrade the hboot from the 1.1xxxx? Because I want root after unsemibricking my flyer.
ikingblack said:
Does this upgrade the hboot from the 1.1xxxx? Because I want root after unsemibricking my flyer.
Click to expand...
Click to collapse
Just use the ROM for your operator or the same WWE RUU that is used for the goldcard with a goldcard.
globatron said:
Just use the ROM for your operator or the same WWE RUU that is used for the goldcard with a goldcard.
Click to expand...
Click to collapse
Alright, thanks.
CuzinBucksBx said:
Well I did some research and I hope I could explain how to un-brick your Flyer/HTC View..
Step 1: Do not freak out!
Step 2 Click here to download your Stock Rom
Step 3 Put your tablet it in recovery. By pressing down the Power button and the Vol Down button. While you have your USB plug to your PC
Step 4 Download adb file
Once you DL extract the file to your desktop.
Step 5,6,&7
Code:
cd C:\adb
Code:
adb devices
Code:
adb reboot oem-78
^^^This will make your Tablet Run RUU exe files
Step 8 Click and Run your Rom for your tablet. This will take 10-15 mins.
<--- HTC View ( Express )
Step 9 You could open your eyes and your Tablet is unbrick.
Please forgive me for a sloppy way to explain but these are the steps to get your tablet to un brick. Plus I am not responsible WHAT SO EVER!!! Just trying to help
Click to expand...
Click to collapse
Much gratitude for saving my butt! Your instructions worked to a T!
alexv59 said:
Much gratitude for saving my butt! Your instructions worked to a T!
Click to expand...
Click to collapse
At least someone in this thread appreciated my help.
OK i followed the instructions provided. However when i go to type the commands into the cmd prompt im told it ist a valid file path or name. HELP!! I am S-OFF and yes call me stupid i did not load the custom recovery after. SO I am stock recovery/bootloader with S-OFF and it wont boot past the HTCscreen.
mizono said:
OK i followed the instructions provided. However when i go to type the commands into the cmd prompt im told it ist a valid file path or name. HELP!! I am S-OFF and yes call me stupid i did not load the custom recovery after. SO I am stock recovery/bootloader with S-OFF and it wont boot past the HTCscreen.
Click to expand...
Click to collapse
LMAO...that makes two of us!
Blaqdymun said:
LMAO...that makes two of us!
Click to expand...
Click to collapse
I didn't do any adb pushing ....
just put phone in recovery/fastboot
Ran the RUU and WHELLA!!!
THANK YOU SO MUCH!!!!
DAPS!
I install with RUU, give error code :
WRONG BOOTLOADER.
And if i install with PG41IMG.zip other error:
Main version is older!
Update Fail!
Press Power to Reboot.
and adb devices show nothing.
C:\flyer>adb reboot oem-78
error: device not found
but fastboot can connect
C:\flyer>fastboot devices
HT16ET400059 fastboot
C:\flyer>fastboot flash boot stock-hc-flyer-boot.img
sending 'boot' (3242 KB)... OKAY
writing 'boot'... INFOsignature checking...
FAILED (remote: signature verify fail)
EDIT: My Flyer runs now.
I have reunlocked from htc homepage.
Related
Hello
I have (or had) a HTC FLyer with s-off and perma root until yesterday when I decided to upgrade to HC. Until the HTCDEV part, everything went ok, I didn't get any issue.
But during unlock bootloader via HTCDEV, it didn't go as the website directed. When I entered "fastboot oem get_identifier_token", I got a msg like this:
"... INFO [ERR] Command error !!! OKAY [0.007s] finised. total time: 0.008s"
This wasn't normal according to HTCDEv web page, but I somehow went to the next step #15, 'fastboot flash recovery revolutionary-cwm-4.0.1.4-flyer.newhboot.img', again everything seemd ok.
Nest step, clockwork mode - recovery THIS IS WHERE I GOT STUCK. When I "click" recovery on bootloader screen it goes to HTC screen and stuck there. I can get back to bootloader screen again by pushing power button long and then vol down - power; but I can no longer continue to CWM, therefore can't flash honeycomb syetem.zip.
When power down and vol-down+power to access bootloader menu, switching between fastboot and bootloader, there's a quick screen (it passes so quick that I couldn't figure out completely) where it says PG41IMG.zip, PG41DIAG etc. not found.
I downloaded the PG41IMG.zip, transferred to the root of the MicroSD card and booted. At the bootloader screen, this time it installed the filen and then later asked me if I wanted to update. Said "yes" with vol- and it updated the system after 5-6 mins.
As the installation ended, device opened but with 2.3.3 (Previous fw was Turkish ROM with 2.3.4 and with this 2.3.3, Turkish language was available only for Germany, Austria and Switzerland and not for Turkey. Then I used RUU_Flyer_HTC_WWE_2.23.405.3_R_Radio_20.3504.30.089BU_3809.07.04.06_M_release_204108_signed if anything could revert back, nothing but updated to 2.3.4, baseband changed to 20.3501 from 20.3504, still S-off.
BUT
* HBoot is STILL 6.10.1002 and didn't go back old one 1.11.1003
* CANNOT go into recovery mode. (first a phone icone with green arrows appear than a phone icon with red exclamation sign shows up), no recovery or CWM, so cannot go anything other.
I tried to re-install HC, but this time failed in radio writing, stuck there. Not a chance to more since RECOVERY gone.
Now the tablet is working (no brick) with 2.3.4 WWE EU rom.
Any idea how to re-install with CWM working and hboot initial version? What's the best way make a clean system?
Thanks
Once you executed the RUU , you are totally back to stock ,unrooted at the version of whatever RUU you used. I would run the RUU again to get everything back to stock, working. You need to go through the root process and install CWM again as if fresh from the box. If still stuck, go to GlobalTron's Revert to GB thread on this forum.
Thanks DigitalMD for comment.
Actually bootloader screen tells I'm still s-off but guess you're right I should be unrooted. To recover CWM, I've installed su-3.0-beta4-efgh-signed.zip to sdcart, but it doesn't seem to load it.
By the way, I'm still in GB 2.3.4 do I have to still revert back to GB with Globaltron to recover hboot?
Thanks & regards,
It depends. If its booting normally, then no. But you will need to do the install of revolution CWM recovery.
Could you please elaborate on how to re-install CWM recovery?
thanks
I actually do not understand what your current status is.
Does the device boot into normal operation?
If so, what version?
DigitalMD said:
I actually do not understand what your current status is.
Does the device boot into normal operation?
If so, what version?
Click to expand...
Click to collapse
Ok let me try to explain more in details. You know here's the guide I followed
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Below photo is where I stuck at #15 after trying to enter recovery mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At this moment, when I swithced between fastboot and bootloader, there was an error (this screen passes so quick so I couldn't take a complete shot). Here I was completely stuck, tablet didn't turn on at all.
Looking at the above photo, I though I needed PG41img.zip; I downloaded it and copied to rootfolder of sdcard. Then the following case happened:
I said "yes" and it worked for some time and then tablet came back to life. I then used another RUU. And now the tablet is working with this rom (GB 2.3.4). Now the bootloader is as follows:
Ok, now is the PROBLEM. At this status, when I go to RECOVERY and select it by pressing power; first this screen comes;
After this screen show up for a few seconds, then this screen comes and I cannot go any further for CWM.
At this status, if I press power button for 20-30 sec, it opens normally with an error "HTC recovered from a serious error, do you want to send report" etc. and other functions seems to work normal.
Now I would ask;
* How could I fix this issue, recover "recovery" and re-load CWM?
* How can I go back and re-load HC?
By the way, I got errors during bootloader unlock with HTCDEV.
Hope it's more clear now
kego said:
Ok let me try to explain more in details. You know here's the guide I followed
http://android.modaco.com/topic/345950-installing-honeycomb-on-your-flyer-the-complete-guide/
Below photo is where I stuck at #15 after trying to enter recovery mode.
At this moment, when I swithced between fastboot and bootloader, there was an error (this screen passes so quick so I couldn't take a complete shot). Here I was completely stuck, tablet didn't turn on at all.
Looking at the above photo, I though I needed PG41img.zip; I downloaded it and copied to rootfolder of sdcard. Then the following case happened:
I said "yes" and it worked for some time and then tablet came back to life. I then used another RUU. And now the tablet is working with this rom (GB 2.3.4). Now the bootloader is as follows:
Ok, now is the PROBLEM. At this status, when I go to RECOVERY and select it by pressing power; first this screen comes;
After this screen show up for a few seconds, then this screen comes and I cannot go any further for CWM.
At this status, if I press power button for 20-30 sec, it opens normally with an error "HTC recovered from a serious error, do you want to send report" etc. and other functions seems to work normal.
Now I would ask;
* How could I fix this issue, recover "recovery" and re-load CWM?
* How can I go back and re-load HC?
By the way, I got errors during bootloader unlock with HTCDEV.
Hope it's more clear now
Click to expand...
Click to collapse
you can reinstall with fastboot
fastboot flash recovery recovery_name.img
Ok, you need to go through the Revolution root process again and let it download and install CWM recovery.
I am a bit puzzled by the bootloader still being Revolution vs. stock. You might need to run the RUU revert process again.
Then if you want to go to HC , you have to redo that entire process again.
I think you need your original unlock.bin from the HTC site if you want to unlock the step it says to unlock the bootloader.
Basically you are back to total stock unrooted, no CWM recovery.
viera77 said:
you can reinstall with fastboot
fastboot flash recovery recovery_name.img
Click to expand...
Click to collapse
Sorry, which file recovery_name.img should be? Do I have to download an image file?
Thanks.
use this
http://revolutionary.io/
DigitalMD said:
Ok, you need to go through the Revolution root process again and let it download and install CWM recovery.
I am a bit puzzled by the bootloader still being Revolution vs. stock. You might need to run the RUU revert process again.
Then if you want to go to HC , you have to redo that entire process again.
I think you need your original unlock.bin from the HTC site if you want to unlock the step it says to unlock the bootloader.
Basically you are back to total stock unrooted, no CWM recovery.
Click to expand...
Click to collapse
As seen, I am still S-off. In order to do Revolution root, in any case I have to go to recovery but this was is closed?
After PG41IMG.zip update and resurrected the tablet, I used RUU_Flyer_HTC_WWE 2.23.405.3_R_Radio_20.3504.30.08 9BU_3809.07.04.06_M_release_204108_signed
rom to return back to original hboot but didn't work. You mean I have to re-run it?
Unlocking from HTCDEV was actually where eveything started. There's the commend "fastboot oem get_identifier_token". According to HTC guide, I have to get some string to be submitted but I recieved error instead like "command error"
Need some magic wand to roll back everything where it was
Thanks.
DigitalMD said:
use this
http://revolutionary.io/
Click to expand...
Click to collapse
HBOOT now changed to 6.10.1002, so not sure if this will work, since it says it supports only hboots 1.10.0000 and 1.11.0003. But still let me give a try.
Thanks.
I think revolutionary.io also doesn't work
Says waiting for device even the device is connected and show up in device manager.
kego said:
I think revolutionary.io also doesn't work
Says waiting for device even the device is connected and show up in device manager.
Click to expand...
Click to collapse
try with fastboot
http://forum.xda-developers.com/showthread.php?p=14693680
viera77 said:
try with fastboot
http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
viera77, thanks, now that worked!!
Now I can enter recovery CWM.
But still issues with HTCDEV unlock, get the same error. Any idea how to go on HC installation?
kego said:
viera77, thanks, now that worked!!
Now I can enter recovery CWM.
But still issues with HTCDEV unlock, get the same error. Any idea how to go on HC installation?
Click to expand...
Click to collapse
because you have soff (revolutionary)
If you are a beginner, HC to install can be risky
Hello,
True, I am beginner. Actually previously I had Advent Vega and Galaxy Tab and especially Advent, I am a bit familiar to HC. But I found HTC a lot complex compared to these
About s-off and HTCDEV unlock here is Paul's guide:
7. Unlock your Flyer's bootloader with Revolutionary.
.
.
14. You are now in a state where you must unlock the bootloader using the HTC tools - visit http://www.htcdev.com/bootloader/ and follow the instructions (Flyer compatability isn't listed, but it'll work)
I think in any case, Flyer is s-off'ed before doing official unlock. Do I miss something?
Many thanks
Turn on usb debugging on the phone and run revolutionary again.
globatron said:
Turn on usb debugging on the phone and run revolutionary again.
Click to expand...
Click to collapse
USB debugging was always on during all processes, never disabled. And revolutionary didn't work neither. Still "waiting for device..."
Seems I need to do s-on somehow but don't know. DigitalMD suggests to run RUU for unrooted and s-on system but this didn't work for my case. Not sure for root, but still s-off.
Puccini LTE Rogers WWE 1.26.631.4 Radio 1.05.550I.09v2_30.68.550I.12 test 21937
hboot_8x60-lte_1.78.0010_20110830_signedbyaa.nb0
Download here:
Code:
http://www.4shared.com/zip/aqVcHfAh/PG09IMG_Puccini_LTE_Rogers_WWE.html
Code:
modelid: PG0941000
cidnum: ROGER001
mainver: 1.26.631.4
hbootpreupdate:13
DelCache:1
DelFat:1
Screen shot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FLASH AT OWN RISK, i take no responsibility if your device is not working afterwards, as I'm a n00b and not a developer.
How to flash:
1. download zip file
2. rename to PG09IMG.zip
3. put file on sdcard root folder
4. boot into recovery
5. when asked to update use the VOL + for YES and VOL - for NO
6. once complete device will reboot and device will be updated
- Feel free to use and abuse ROM as as you feel like it
Good Luck and Enjoy!
sorry for beeing a noob, but what do i get when i flash this rom, i assume that all the crap that at&t put in dissapears, but do i get extra stuff from htc, like locations?
also, do i have to have s-off?
Is this rooted?
Not rooted
Daniehabazin said:
sorry for beeing a noob, but what do i get when i flash this rom, i assume that all the crap that at&t put in dissapears, but do i get extra stuff from htc, like locations?
also, do i have to have s-off?
Click to expand...
Click to collapse
This is just a new version of the ROM from ROGERS so that means it still has bloat ware on it not from AT&T but from ROGERS so IMHO i wouldn't bother.
i put it up here so maybe some dev can take it apart and make some thing useful out of it.
PS< this ROM can be flashed on a NON-ROOTED jetstream as it is a official ROM, just not sure you'd want to if you're not with ROGERS.
Good Luck!
BIGMOH said:
This is just a new version of the ROM from ROGERS so that means it still has bloat ware on it not from AT&T but from ROGERS so IMHO i wouldn't bother.
i put it up here so maybe some dev can take it apart and make some thing useful out of it.
PS< this ROM can be flashed on a NON-ROOTED jetstream as it is a official ROM, just not sure you'd want to if you're not with ROGERS.
Good Luck!
Click to expand...
Click to collapse
ok, maybe it still has bloatware, but i downloaded the manual from htc, and it looks like it has more programs that's useful, like wi-fi hotspot, and it has htc navigation, if it's like htc locations, then it has offline maps
i tried to flash this rom, but i had problems typing in fastboot commands
has any flash this Roman on At&t jetstream
If yes did you face any problems
Daniehabazin said:
ok, maybe it still has bloatware, but i downloaded the manual from htc, and it looks like it has more programs that's useful, like wi-fi hotspot, and it has htc navigation, if it's like htc locations, then it has offline maps
i tried to flash this rom, but i had problems typing in fastboot commands
Click to expand...
Click to collapse
Can you post the steps that you took to flash?
BIGMOH said:
Can you post the steps that you took to flash?
Click to expand...
Click to collapse
First i put the downloaded file on a external sd card, renamed it to PG09IMG.zip, booted into recovery, on the screen i saw a column moving, checking the file.
after a while when it was done, i selected the recovery menu, i got i icon with a phone and a exclamation mark, and after a while it rebooted.
Then i tried to flash it throu fastboot,
in fastboot mode, i typed:
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip PG09IMG.zip
after some checking i got FAILED (remote: 42 custom id check fail)
so i assume that there is some check if i have a jetstream from at&t or rogers.
Daniehabazin said:
First i put the downloaded file on a external sd card, renamed it to PG09IMG.zip, booted into recovery, on the screen i saw a column moving, checking the file.
after a while when it was done, i selected the recovery menu, i got i icon with a phone and a exclamation mark, and after a while it rebooted.
Then i tried to flash it throu fastboot,
in fastboot mode, i typed:
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip PG09IMG.zip
after some checking i got FAILED (remote: 42 custom id check fail)
so i assume that there is some check if i have a jetstream from at&t or rogers.
Click to expand...
Click to collapse
not 100% sure but do you have S-OFF?
also another thing i noticed different is how it reacted to your jetstream, on mine, i copied the ROM to the ext sd card in the root folder and then i booted into recovery it did a whole bunch of checks and then it asked me if i wanted to upgrade or not. So not sure why you had to go into the recovery menu. maybe try having your jetstream on fastboot and try it again.
Hope it works! Good Luck!
BIGMOH said:
not 100% sure but do you have S-OFF?
also another thing i noticed different is how it reacted to your jetstream, on mine, i copied the ROM to the ext sd card in the root folder and then i booted into recovery it did a whole bunch of checks and then it asked me if i wanted to upgrade or not. So not sure why you had to go into the recovery menu. maybe try having your jetstream on fastboot and try it again.
Hope it works! Good Luck!
Click to expand...
Click to collapse
i don't have s-off
when i had the rom on my ext sd card it did the checks like it did on your's but i didn't get the update prompt, i even tried to use a gold card.
so i don't think at&t wants us to update the rom, i think i'll have to wait till we get unlocked bootloader or when we get root.
Your jetstream is at&t so you can't flash rogers rom
I have done all the above mention methods and by using goldcard.
Noway
Daniehabazin said:
i don't have s-off
when i had the rom on my ext sd card it did the checks like it did on your's but i didn't get the update prompt, i even tried to use a gold card.
so i don't think at&t wants us to update the rom, i think i'll have to wait till we get unlocked bootloader or when we get root.
Click to expand...
Click to collapse
yup, i think you are correct!
Total bummer!
Anyone have a good mirror??
is there a mirror for it?
I brick my device and need this to restore...
up soon
TMartin said:
Anyone have a good mirror??
Click to expand...
Click to collapse
ytwytw said:
is there a mirror for it?
I brick my device and need this to restore...
Click to expand...
Click to collapse
Sorry guys didn't know it was down.
Uploading to 4shared and will have the link in an hour or so.... DONE--> check the OP#1
Thanks for the PM ytwytw, that did the trick to bring it to my attention
Also on another note on data and SIM usage... this ROM is NOT LOCKED to ROGERS although it has a splash screen saying ROGERS, I've tried it with TELUS and BELL and can confirm it works perfectly
can someone tell me the steps to flash this. i booted into recovery the bar moves up after it does nothing
cbprod said:
can someone tell me the steps to flash this. i booted into recovery the bar moves up after it does nothing
Click to expand...
Click to collapse
i think allot of people have tried this, although I've heard it only works on S-OFF devices. Hope this helps.
BIGMOH said:
i think allot of people have tried this, although I've heard it only works on S-OFF devices. Hope this helps.
Click to expand...
Click to collapse
my is set to s-on but its a rogers tablet not sure if it matters.
cbprod said:
my is set to s-on but its a rogers tablet not sure if it matters.
Click to expand...
Click to collapse
Have you tried going into settings > about tablet > CHECK Software updates?
BTW what is your software version maybe you already have this version if you are on Rogers.
Hi,
I'm stuck in this situation with my htc evo view 4g device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
everytime I try to reboot, or enter recovery, or factory reset it just hangs at this screen:
I try to flash this stock rom
RUU_Express_Sprint_WWE_1.22.651.1_Radio_1.05.11.0531_NV_2.28_SPCS_release_198141_signed
(via both RUU on my pc and goldcard with PG41IMG.zip), it was flashed flawlessly, but when finished it hangs in that "htc" screen.
I tried to s-off by revolutionary but I can not access the android working screen so that can not enable usb debugging mode, on the pc it just shows
waiting for device ....
Click to expand...
Click to collapse
I tried to unlock the bootloader via htcdev (I know my view 4g isn't in the supported list yet, but at least fastboot should read its info, but I was wrong). At step 8, it shows:
C:\Android>fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
Click to expand...
Click to collapse
It still boots in to fastboot mode,and I could see that it's s-on, hboot is 1.13. Now I want to make it s-off or unlock the bootloader in order to flash a custom rom.
Can some one please help me with this ?
Thanks a lot,
Medkid
I tried to unlock the htc view's bootloader by htcdev, at steps 8 it shows me this
C:\Android>fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
Click to expand...
Click to collapse
can you help ? plz
what were you trying to do when you got into this situation and did you run the ruu more than once?
mcord11758 said:
what were you trying to do when you got into this situation and did you run the ruu more than once?
Click to expand...
Click to collapse
Upload the logs from c:\ruu_log
yes, I try to run RUU about 10 times, and It always runs till the end, but after that my device just hangs at htc screen
mcord11758 said:
what were you trying to do when you got into this situation and did you run the ruu more than once?
Click to expand...
Click to collapse
I don't know what happened to my evo view, I didn't s-off it before. My brother borrowed it and when he gave it back to me, it was just in that situation, hung at htc screen. So I tried to flash another stock rom (actually , it's the rom running in my device) , but I have no luck to bring it back
Are you sure you're using the 1.22.651.1 RUU?
The reason for asking is that the RUU process is detecting that as the version-main on your device but is then saying there is a version check failure which would indicate that that is not the RUU you are using.
I tried the RUU in the first post, also another sprint express RUU 1.18 with no success bcoz of a bootloader error. I download these 2 roms from this thread
http://forum.xda-developers.com/showthread.php?t=1062184
You must use the 1.22.651.1 ROM, can you run that again and collect the RUU log for that version.
revolutionary root
medkid said:
I've a htc evo view 4g device. Now, it's stuck in the semibrick circumstance i think. It still boots in to fastboot mode,and I could see that it's s-on, hboot is 1.13. Now I want to make it s-off or unlock the bootloader in order to flash a custom rom. I tried the stock rom RUU_Express_Sprint_WWE_1.22.651.1_Radio_1.05.11.05 31_NV_2.28_SPCS_release_198141_signed , it did flash but when it reboots it just hangs up at "htc" white screen.
I tried htcdev to unlock the bootloader but they do not support View 4g yet.
I tried revolution pre 0.4 without any luck because it asks for the device to enter the working screen. The tool only shows "wating device..."
Can some one please help me with this ?
Thanks a lot,
Medkid
Click to expand...
Click to collapse
I used the same method as I did on the Evo 3D for my HTC view tablet and it works My view is rooted hope this helps in anyway
dlo227 said:
I used the same method as I did on the Evo 3D for my HTC view tablet and it works My view is rooted hope this helps in anyway
Click to expand...
Click to collapse
thanks for your answer. But in order to make revolutionary to work, you have to access android working screen to enable the "usb debugging mode", if not, there is no luck. htcdev tool does not ask for this, everything is working on the fastboot mode. Unfortunately, somehow fastboot.exe couldn't read my device info in the step 8.
@globatron, I'll try to reflash it and upload the log. Thanks so much for joining me
Try pulling the rom.zip out of the 1.22 ruu.
Rename the zip PG41IMG.zip (.zip is the extension not part of the name, some people actually make that mistake).
Place the PGxx.zip in the root of an sdcard and place the card in the device.
Boot the device into bootloader/fastboot and let it read and hopefully it should install and get you back to a running state.
I find running ruu's can most times be a pain than a saviour.
lovethyEVO said:
Try pulling the rom.zip out of the 1.22 ruu.
Rename the zip PG41IMG.zip (.zip is the extension not part of the name, some people actually make that mistake).
Place the PGxx.zip in the root of an sdcard and place the card in the device.
Boot the device into bootloader/fastboot and let it read and hopefully it should install and get you back to a running state.
I find running ruu's can most times be a pain than a saviour.
Click to expand...
Click to collapse
thanks for your advice, I did try it that way with no success. let me make thing clearer in the first post.....
Run the RUU again as I said, with the version I specified. I need to see a log that is definitely for that version.
Sorry for the delay, it seems that the main battery is low, I can't run the RUU right now. It is charging. Sorry for that
when you have enough power to do this, delete all the old log files before running the RUU so only the ones from this run are included.
okay, here it is the log file
ok, that RUU was entirely successful. Does it boot now or is it still the same?
It's still the same, hangs at htc screen
try removing the sdcard and a factory reset (both together) then see if it will boot with the card still removed. If not take it in for repair telling sprint that you tried to take an OTA update then this happened.
So I'm a real noob to rooting, so please be patient. My wife dropped her phone in the washing machine without noticing, and it went through a whole cycle. Long story story, her HTC EVO 3d is dead, and had to buy used one off ebay. Just got it yesterday, it's been rooted with stock 2.3.4 rom. She was never a fan of this, so I looked into getting her a custom ICS rom. Already installed was the Revolutionary CWM recovery from the previous owner. How this differs from regular CWM, I'm not sure. I went ahead and download ROM manager and assumed I flashed the recovery to regular CWM. I then proceeded to reboot with the power and vol down buttons, and was searching the recovery menus again, and I noticed Revolutionary CWM was still on the phone. Then I somehow accidentally installed a custom rom I downloaded on the sd card, into the recovery menu. Well now the phone doesn't go past the HTC logo and I'm at a loss. Any help or am I doomed?
First thing you need to do is pull out the battery, put it back in and hold power+vol down button.
should get you into bootloader. Tell us what it says there. like s-on/off hboot version etc. you probably should be able to access recovery from there as well
How to fix recovery
Im not such an expert on android, rooting etc but that knowlegde I have ill share
As far as I know, I may be wrong, the HBoot version you have wont make a difference,
Try -
- take battery out
- replace battery and hold volume up rfirst and then press and hold power (boots in hboot after +/- 3 seconds)
- now use power, and volume buttons, boot into fafstboot(should just be power button)
- plug usb cable in computer and connect phone
- if you have fastboot, navigate to the exe (fastboot.exe) else just google fastboot download
- google your choice of recovery, 4 ext (i prefer) or cwm,etc its a zip file(extract the recovery.img file) or just a plain recovery.img file
- place this recovery.img file in the exact diractory as fastboot
- now make sure your phone says FASTBOOT USB, ,if it doesnt, check that ur phone is connected, try different usb ports or other cables
- press windows key and 'r' @ the same time, then run cmd
- navigate to fastboot directory
- type " fastboot devices" to check if cmd picks up ur phone , result should be a serial num- mine eg would look like (HN225NM5698)
- then if it did pick up device...
- type " fastboot flash recovery recovery.img " flashes ur custoom recovery u downloaded to ur phone
- now to boot into recovery type " fastboot boot recovery.img " OR to reboot type " fastboot reboot " phone reboots
IF ABOVE INSTRUCTIONS DID NOT SOLVE PROBLEM
try, if possilbe, booting into OS, download ROM manager and flash CWM recovery through that, if that doesnt work
try running a RUU, (remember to change ur CID to match RUU) and lock ur bootloader
if all else fails, follow my post @ ask team derp ur q pg.550, that might help:good:
cybergurken said:
the HBoot version you have wont make a difference,
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@OP
If you want a completely up to date phone just use the latest RUU. It will update everything to the latest.
Then if root is not important leave it. And if you want root then just flash a recovery and then superuser zip.
EDIT : I see you edited it yourself.
EM|NEM said:
First thing you need to do is pull out the battery, put it back in and hold power+vol down button.
should get you into bootloader. Tell us what it says there. like s-on/off hboot version etc. you probably should be able to access recovery from there as well
Click to expand...
Click to collapse
Yes, I'm able to get into both bootloader and Revolutionary CWM Recovery. Bootloader states:
***UNLOCKED***
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
Aug 7 2011, 10:21:40
If you want to run roms w/o problems I'd suggest you get s-off.
http://forum.xda-developers.com/showthread.php?t=1889438
This guide should be sufficient
EM|NEM said:
If you want to run roms w/o problems I'd suggest you get s-off.
http://forum.xda-developers.com/showthread.php?t=1889438
This guide should be sufficient
Click to expand...
Click to collapse
Awesome, I will look into this guide. Should I do the guide step by step or just the wire trick for s-off?
@EM|NEM
Oops My Bad..
How can i forget that i had hboot 1.5 and wasnt able to use revolutionary so i did unknownforce's bricking method.
Thanks.
the wire-trick requires stock rom although some people have managed to get it to work with custom roms. you'll probably need to run the RUU to get back to stock so its best if you follow all the steps.
---------- Post added at 01:16 AM ---------- Previous post was at 01:07 AM ----------
mnomaanw said:
NO WAIT! Why do you want to go the harder way when you already have hboot 1.50, which can be s-offed without wiretrick !
Go to revolutionary.io and set your 3d free.
Dont run the ICS RUU , just run the 2.08 gingerbread ruu again and use revolutionary.
Click to expand...
Click to collapse
isnt a 1.4 hboot required for cdma? i'm not sure about this as i have a gsm device
Ok, so because it's my wife's phone, and she could care less if it's rooted or not, what is my best option here? All she'd like is stock ICS, like on her last non-rooted stock Evo 3D. Would it be best to flash ICS ruu and call it done? Is this the easiet way to get it back to basic ICS as OTA updates won't work?
cmsanchez00 said:
Ok, so because it's my wife's phone, and she could care less if it's rooted or not, what is my best option here? All she'd like is stock ICS, like on her last non-rooted stock Evo 3D. Would it be best to flash ICS ruu and call it done? Is this the easiet way to get it back to basic ICS as OTA updates won't work?
Click to expand...
Click to collapse
Yes sir! OTAs will work after clean RUU flash. And if you ever want to s-off or just unlock through htcdev, you can always do that later.
cmsanchez00 said:
Ok, so because it's my wife's phone, and she could care less if it's rooted or not, what is my best option here? All she'd like is stock ICS, like on her last non-rooted stock Evo 3D. Would it be best to flash ICS ruu and call it done? Is this the easiet way to get it back to basic ICS as OTA updates won't work?
Click to expand...
Click to collapse
If she want stock ics then the ruu well be enough
Sent from my HTC Sensation Z710e using Tapatalk 2
mnomaanw said:
Yes sir! OTAs will work after clean RUU flash. And if you ever want to s-off or just unlock through htcdev, you can always do that later.
Click to expand...
Click to collapse
Awesome, thanks for your help everyone. Appreciate it.
cmsanchez00 said:
Awesome, thanks for your help everyone. Appreciate it.
Just to confirm, I can use either the Gingerbread OR the ICS ruu correct?
Click to expand...
Click to collapse
yes but once you use ICS, you cannot use gingerbread again unless you are s-off.....you can flash same version of gingerbread or an updated version of gingerbread or ICS but you cannot flash old version once you update...in short , you cannot downgrade.
mnomaanw said:
yes but once you use ICS, you cannot use gingerbread again unless you are s-off.....you can flash same version of gingerbread or an updated version of gingerbread or ICS but you cannot flash old version once you update...in short , you cannot downgrade.
Click to expand...
Click to collapse
Perfect. Makes sense.
So I tried flashing ruu but cannot because pc cannot recognize phone, as I can't get it to go past htc logo as it just hangs there. It's basically sitting in a Charge Only mode. I'm only able to access bootloader screen. Sooooo, next option would be to place RUU on sd card and install from there, correct? Does ruu need to be zip file in order to flash in recovery screen? Or can I still use the exe file that's sitting on my desktop?
Boot into boot loader and select fastboot and connect phone to pc ...phone should show fastboot usb.then run the RUU and let it complete the process . It's not necessary to boot into android if you are in fastboot mode.
EDIT : oh sorry I forgot, that you will have to relock the boot loader before using RUU using "fastboot oem lock" command
mnomaanw said:
Boot into boot loader and select fastboot and connect phone to pc ...phone should show fastboot usb.then run the RUU and let it complete the process . It's not necessary to boot into android if you are in fastboot mode.
EDIT : oh sorry I forgot, that you will have to relock the boot loader before using RUU using "fastboot oem lock" command
Click to expand...
Click to collapse
So, here's my issue, I can see FASTBOOT USB show up no problem in bootloader, but my problem is, my pc won't recognize my phone through usb cable. My phone doesn't show up in windows explorer. Before, I could just change the USB from "charge only" to "Disk Drive" and my pc would list my sd card at Drive E. That's my issue, if pc can't see phone, I can't relock bootloader and can't run ruu. Am I missing a step here?
cmsanchez00 said:
So, here's my issue, I can see FASTBOOT USB show up no problem in bootloader, but my problem is, my pc won't recognize my phone through usb cable. My phone doesn't show up in windows explorer. Before, I could just change the USB from "charge only" to "Disk Drive" and my pc would list my sd card at Drive E. That's my issue, if pc can't see phone, I can't relock bootloader and can't run ruu. Am I missing a step here?
Click to expand...
Click to collapse
If you have htc sync on your pc uninstall it and install htc drivers (google it) and restart your pc
Also if you have antivirus disabled it too
Sent from my HTC Sensation Z710e using Tapatalk 2
hanisod said:
If you have htc sync on your pc uninstall it and install htc drivers (google it) and restart your pc
Also if you have antivirus disabled it too
Sent from my HTC Sensation Z710e using Tapatalk 2
Click to expand...
Click to collapse
I don't have HTC sync and I installed the htc drivers. No bueno.
Only way I can get my pc to recognize phone is if I go into recovery and "Mount USB Storage" - this is the only way File Exporer pops up my sd card.
Hi all my first post
Im from Sweden 27 years and a total noob @ android and custom roms :/
Well i have this phone HTC rezound and ill found it in my dumpster today.
Did not start because no battery so after 4 hours load it went on i'm very happy.
Did not accept my sim card (Sweden) So i thinked oo well lets install custom rom.
It had something called clockwork pre installed & superuser ..+++much more i wanted a fresh install.
i put over ev_vigor-4.0.0b1-20140128-kitkat all went fine after it said install update..there was a map called update i ok i went then "error"
i eas **** no? Rly? well did a rs bam only load to htc screen then nothing .....plz help me
derileec said:
Hi all my first post
Im from Sweden 27 years and a total noob @ android and custom roms :/
Well i have this phone HTC rezound and ill found it in my dumpster today.
Did not start because no battery so after 4 hours load it went on i'm very happy.
Did not accept my sim card (Sweden) So i thinked oo well lets install custom rom.
It had something called clockwork pre installed & superuser ..+++much more i wanted a fresh install.
i put over ev_vigor-4.0.0b1-20140128-kitkat all went fine after it said install update..there was a map called update i ok i went then "error"
i eas **** no? Rly? well did a rs bam only load to htc screen then nothing .....plz help me
Click to expand...
Click to collapse
plz help me RESCUE MODE
derileec said:
plz help me RESCUE MODE
Click to expand...
Click to collapse
is the phone s-on?
REV3NT3CH said:
is the phone s-on?
Click to expand...
Click to collapse
How do i know that?
I found this phone in a dumpster
seams like on button is broken :/ phone random switch on :/ and only when phone wants
derileec said:
How do i know that?
I found this phone in a dumpster
seams like on button is broken :/ phone random switch on :/ and only when phone wants
Click to expand...
Click to collapse
i was gonna say pull battery and place it back in and then at the same time hold volume down and power..if your s-on you can just flash a rom and have it boot....you have to flash the rom and fastboot flash its kernel from your pc in order for it to work...if your s-off you dont have to worry about this...a quick search in the rezound forums will answer all your questions..but if needed ill be glad to further help
REV3NT3CH said:
i was gonna say pull battery and place it back in and then at the same time hold volume down and power..if your s-on you can just flash a rom and have it boot....you have to flash the rom and fastboot flash its kernel from your pc in order for it to work...if your s-off you dont have to worry about this...a quick search in the rezound forums will answer all your questions..but if needed ill be glad to further help
Click to expand...
Click to collapse
when i press start+volym down i come to a screen.
****unlocked****
vigor pvt ship s-on rl
hboot-2.10.0000
eMMc-boot
oct 5 2011,21.18:48
hboot
<vol up> to previous items
<vol down> to next item
<power> to select item
fastboot
recovery
factory reset
clear storage
simlock
image crc
*****************EDIT*****************************
Ok i downloaded "cm-11-20140127-UNOFFICIAL-vigor.zip"
Put it on my sd card went to recovery removed and wiped all ****.
Installed all done RS=htc logo only :/ i am doing something wrong.....
http://i.imgur.com/RVtrYLI.png
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
derileec said:
****unlocked****
vigor pvt ship s-on rl
*****************EDIT*****************************
Ok i downloaded "cm-11-20140127-UNOFFICIAL-vigor.zip"
Put it on my sd card went to recovery removed and wiped all ****.
Installed all done RS=htc logo only :/ i am doing something wrong.....
Click to expand...
Click to collapse
ok you are s-on....you can do 1 of 2 things to make this quick. download the android sdk program as it has the fastboot tool built in or dig around for the rezound all in one toolkit which also containing same fastboot tool...you use command prompt in windows 7 to do it...or if you have ubuntu this is installed by default...what you gotta do is extract the boot.img from that rom itself that you are flashing and place it in the same folder as your fastboot tool....put phone in hboot with volume down and power to get to that screen and select fastboot by tapping power button to do so.....plug the phone in and youll see it now says fastboot usb...now in command prompt or terminal cd into that folder that contains the fastboot tool and type this command. fastboot flash boot boot.img then press enter and it will flash the boot.img and your phone will fully boot up
REV3NT3CH said:
ok you are s-on....you can do 1 of 2 things to make this quick. download the android sdk program as it has the fastboot tool built in or dig around for the rezound all in one toolkit which also containing same fastboot tool...you use command prompt in windows 7 to do it...or if you have ubuntu this is installed by default...what you gotta do is extract the boot.img from that rom itself that you are flashing and place it in the same folder as your fastboot tool....put phone in hboot with volume down and power to get to that screen and select fastboot by tapping power button to do so.....plug the phone in and youll see it now says fastboot usb...now in command prompt or terminal cd into that folder that contains the fastboot tool and type this command. fastboot flash boot boot.img then press enter and it will flash the boot.img and your phone will fully boot up
Click to expand...
Click to collapse
i have clockworkmod recovery on phone ? whats that?
derileec said:
Click to expand...
Click to collapse
crud you are using windows 8 arent you......nothing really you can do in windows 8 bud...requires windows 7 or straight linux
OMFG
REV3NT3CH said:
crud you are using windows 8 aren't you......nothing really you can do in windows 8 bud...requires windows 7 or straight linux
Click to expand...
Click to collapse
Wow so fkin g*y been sitting here and reinstall driver+progs try new things...asked my self if i'm dumb and cant follow guides.
Yeah im on Windows 8.1 x64.
derileec said:
Wow so fkin g*y been sitting here and reinstall driver+progs try new things...asked my self if i'm dumb and cant follow guides.
Yeah im on Windows 8.1 x64.
Click to expand...
Click to collapse
yeah windows 8 is very incompatible with alot of drivers for a mass majority of devices...good news is phone is still fixable...bad news is youll have to install linux or downgrade to windows 7...or use a seperate computer that does have windows 7
REV3NT3CH said:
yeah windows 8 is very incompatible with alot of drivers for a mass majority of devices...good news is phone is still fixable...band news is youll have to install linux or downgrade to windows 7...or use a seperate computer that does have windows 7
Click to expand...
Click to collapse
Was omw to install radi-o so i just install it with windows 7x64, will it work?
derileec said:
Was omw to install radi-o so i just install it with windows 7x64, will it work?
Click to expand...
Click to collapse
with proper drivers and such yes...there is methods for flashing radio while s-on....same method almost....i really suggest while on a windows 7 pc to gain s-off using rumrunner method as it will make your life alot easier....as you will not have to flash the boot.img with every rom while s-off
REV3NT3CH said:
with proper drivers and such yes...there is methods for flashing radio while s-on....same method almost....i really suggest while on a windows 7 pc to gain s-off using rumrunner method as it will make your life alot easier....as you will not have to flash the boot.img with every rom while s-off
Click to expand...
Click to collapse
Hi i found an old computer with xp x32 fastboot worked gr8.
I think i still did something wrong couse this rom was for s-off :/ well lol @ me Can some sweet soul point out an room+kernel+boot
for My phone that will remove that pice of **** verizon thing?Or better to go putt S-off with wire trick? is it healthy?
derileec said:
Hi i found an old computer with xp x32 fastboot worked gr8.
I think i still did something wrong couse this rom was for s-off :/ well lol @ me Can some sweet soul point out an room+kernel+boot
for My phone that will remove that pice of **** verizon thing?Or better to go putt S-off with wire trick? is it healthy?
Click to expand...
Click to collapse
dude with rummrunner method you dont need a wire trick....but you do need to be on custom kernel like funky kernel and a non stock sense rom and custom recovery like cwm....also being on a non sense rom will get rid of that verizon message
Get TWRP from GooManager app (once in GooManager grant SU, press menu then press install openrecoveryscript).