Hi,
I m quite used to play with firmware on my tablets (haipad M7 and malata zpad t2)or my motorola Defy so i m not completely n00b with android but here is some problems i got from my new Atrix
1°)i got it with AT&T release 1.8.3
problems:
some telephone numbers got it reboot (mobistar N° like voice mail 5555xx) or restart automaticly after i try to stop the conversation (red button) cause i got no sound
wifi problem when ssid is not broadcasted (froyo problem known) ,got to connect manualy
theses problems are minor coz for me 1.8.3 from at&t is the best available
2°)so i unlock the phone via fastboot : ok
3°)i took the International House of Pudding! (Unlock/root thread) Updated July 23 2011 1.8.3 (preinstall)
problems:
same as at&t 1.8.3 + many reboot (even if the phone is locked,wake up during the night with at&t white screen ;p)
reboot with "phone" application and "message" application
4°)i put International House of Pudding! (Unlock/root thread) Updated July 23 2011 4.5.91
solved:
phone numbers from mobistar (be) and wifi automatic connection to not broadcasted ssid
problems:
many many reboot (a reboot every 4 or 5 hours) from theses application..calendar,weather,phone,sms,main
5°)last but not least i put the 4.5.91 radio from motorola.
problem:
one and only...unable to enter the phone because loop of error from main application,the one and only solution is taking out the battery
6°)back to 1.8.3 from At&T ;p
c u
Alain
Hmmm... have you tried using any other roms? I suggest using an international one such as http://forum.xda-developers.com/showthread.php?t=1160649, although I'm not entirely sure whether your phone is ATT or international?
it s an At&t not international
i tried french one but ut didn t install
Related
Hello All
For some reason I am having problem voice calling my wife T3020 Android from Telstra. It show connected but there are no audio at all, whether with loud speaker turned on / off. Then the Atrix would be stuck with the call and eventually reboot itself.
On the T3020, I can voice call my Atrix will no problem. I also call my son on his NextG compatible iphone. My old LG with Edge connection with no problems.
Things that I have tried:
Updated my Atrix from 4.1.2.6 to 4.1.5.7, 4.1.8.3 via OTA.
Flash Atrix with custom roms (GingerBlur v4, GladiAtrix 3 Beta)
Non of the above solve any issue.
Any help is appreciated, thank you
Sammm
Whats her number? Ill give her a call
/s
OT: Try a full factory reset and straight up 1.8.3 sbf
Sent from my GT-I9100 using XDA Premium App
tjjensen23 said:
Whats her number? Ill give her a call
Thanks, I have PM you a test number for my Telstra T3020
OT: Try a full factory reset and straight up 1.8.3 sbf
I have already done a factory reset after restore the sbf file. The only thing I haven't try is to goes into stocks recovery and wipe data. I might try that now.
Click to expand...
Click to collapse
Here goes...
Restore 1.8.3 sbf via RSD Lite ..
run the initial setup ..
call T3020 .. call connected with no audio. Hang up fail. Atrix rebooted itself ..
Atrix restart / run factory reset and gone through setup again ..
call T3020 .. call connected with no audio. Hang up fail. Atrix rebooted itself ..
Power off Atrix ..
Power + Volume Dn > Android Recovery > wipe data / factory reset ..
Atrix rebooted / run through setup again ..
call T3020 .. call connected with no audio. Hang up fail. Atrix rebooted itself ..
Tried to flash telstra 1.4.2 radio only ..
process fail with error "sec_exception febe, 35, 35 (What ever that mean, I have not a clue)
Sammm
Dear All
Thanks everyone for viewing I have solve my own problem already.
It seems that The AT&T Atrix 4G have some sort of communication problem handling the Telstra Smart-Touch T3020 in 3G mode. But it can connect to Telstra Smart-Touch T3020 2G without drama. The problem can be work around by switch the Atrix to 2G only every time I call that phone, or simple flash the 1.8.7 radio to fix it.
If you don't knows how to flash sbf file. Do a search in Atrix 4G forum on this site and you will be able to find it.
Here is the link to the radio from XDA Developer:
http://forum.xda-developers.com/showthread.php?t=1052914&page=35
Sammm
Didn't work for me
Great post.
I have an Atrix 4G AT&T on Telstra.
After the 1.8.3 OTA update, the H+ icon appeared and the data speeds were awesome. I was very happy.
Unfortunately after the update, I couldn't call my girlfriend. The phone would crash/reboot on the dialer. She had the same problem calling me with a crash/reboot. I thought it sounded like the same problem you had been having and that you'd described here.
I did what you did, flashed the radio, but got different results, it didn't work. Flashing fixed the crash/reboot problem, but now it'll only connect to Telstra at EDGE speeds (ie s-l-o-w.)
Tried factory reset to get the original radio, no dice. I'm now flashing back to stock.
Appreciate your post, but I just wanted to put it out there that it wasn't working in case there are others with the same probs. Cheers!
Hello, SC
Which model of phone did you have problem calling.
What is your Atrix Baseband stock radio version, mind is N_01.77.15P.
After flashing N_01.87.00R.
Hi All
I'm on Telstra with and ATT Atrix and was having this issue. I just flashed the 1_8_7 radio sbf and at this stage it appears to have fixed the problem (I haven't tried all the probelm numbers yet but the ones I have tried are OK). I also appear to still have good data speed and show a H+.
After flash the Baseband version is N_01.87.00R.
Thanks.
Di you need root or unlocked bootloader to flash radio?
Sent from my MB860 using Tapatalk
Latest Update: August 2011
The latest Offical OTA 4.5.91 Motorola Atrix 4G GingerBread 2.3.4 and Radio v1.77.30P Update have fixed this radio issue. No more crashes reboots when connect to T3020/X850 aka Telstra Smart Touch
Sam
good to know cheers was toying with idea of flashing telstra radio now confirmed no point
ok this phone a brand new, i can receive calls and text but when i dial a number and try to make a call the phone restarts
This is factory unlocked and not rooted
Try flashing a newer radio rom.
I dont want to root it incase i cant get the original rom back.
It is weird as, i have tried with every sim card to make calls and it works but when i put the 3 sim in does plays up
We experienced the same issue on some Turkish networks as well and flashing a newer radio rom fixed the problem. Flashing roms and rooting are totally different. What you need is a newer version of your current baseband ( radio rom ) sbf and official motorola software flasher " RSD Lite 5.3 "
Hope it helps.
Thank you so much for that Semseddin.
My problem solved, i just flashed it using RSD lite 4.9
Thanks everyone
Hi. I've been having the exact same issue. I've got an unlocked AT&T Atrix and I'm trying to use a Three UK sim (I'm in the UK). I'm a bit new to the world of android, can someone post a link to an appropriate Radio Rom?
Thanks for any help!!
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Why is it always 3 that cause a problem?
When the Nokia N900 came out, that wouldn't work with 3 initially until a couple of updates later!
lowndes783 said:
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Click to expand...
Click to collapse
May not work for Pay as you go? I didn't think that it had 2G fall back?
Hi folks
I used this app to unlock my phone (SGS2) from Three UK to Orange UK - Worked perfectly...! (Rated 5 stars in the market by the way)
Then (stupidly?!) I upgraded the firmware using the Samsung OTA update this morning to WKF4 (which went well) but now I get "No Service" when using my Orange SIM. I can put in the original Three SIM card and it works fine (eg I get service and can make calls), when I insert my orange the problem returns.
I do not get a box asking for my unlock code a second time when inserting the Orange SIM.
Does any kind individual have any pointers or ideas?
Some extra information: I notice that Im prompted to download a further update (which I havent done yet). Im running on Android 2.3.3 (Yes Im rooted and have SU permissions according to Titanium backup)
*#SIMLOCK# shows everything is OFF
Any pointers welcome
Thanks
Dont know why you did not install a non branded firmware since you seem to be using UK 3 and Orange sim cards.
Search in this forum there a a few unlock tips and apps..
Great, thanks. Ill take a look.
Im new to the SGS2 (HTC Desire before) - I had planned to install a generic firmware - Perhaps that should be the next thing I try to see if it makes any difference.
(searched the forums here, but there is apparently noone with a similar problem)
I have a larger problem with a former S5839i (French model - Bouygues branding). The phone belongs to a colleague of mine. She called me a few days ago claiming that her phone "is broken". It was stuck at the bootscreen. The software she used before the phone failed was the initial Bouygues release. Apparently there was an update pushed to her phone (the newer Bouygues-release) and it softbricked the device.
No big deal. I flashed the phone to a 5830i - using the emergency recovery files for Odin that someone posted here on the forum (the 5-part set including the pit-file). Afterwards flashed to the latest European build (Netherlands). Worked like a charm, the phone is working smoothly.
At least I thought so. But when I started it with her SIM, it would not recognize her Network (Pelephone - Israel). The same is true for other bands/providers. Other phones show a full signal with that SIM, the problematic device will barely recognize a network at all (sometimes gives one shaky bar). Prior to the softbrick, the phone would have a full signal as well.
Here is what I tried so far:
- Tried flashing several different basebands as well as changing the entire system (to Czech, French, etc version) - Problem remains
- Checked for possible SIM-locks - Phone is not locked
- Used shortcut *#197328640# and forced the phone to use only the 850Mhz or 2100Mhz band (these are the ones Pelephone operates on) - Problem remains
I have officially run out of ideas. So: Is there a white cellphone wizard that can come to my rescue...?
EDIT: Before someone asks: I checked if the IMEI is still there. Everything normal on that front...
Ok I have a rooted and unlocked Pan-tech Flex P8010. It originally was an AT&T locked Phone till I unlocked it (semi-successfully) and hooked it up to my current T-Mobile account. AT&T refused to give me an unlock code, so I bought one online. Worked smooth as silk for everything, well except the Internet. I cut down my T-Mobile sim card and made it into a Micro sim to fit the Flex and all seemed OK except my mobile network state shows disconnected even though all of the areas to activate data have been checked off. But that's only part of the issue. I believe if I upgrade my android version from 4.0.4 Ice Cream to 4.4 Kit Kat it just might work that glitch out. However I can't get an upgrade from AT&T, where my phone heads to in order to get it's updates. So I need a website where I can actually DOWNLOAD a copy of 4.4 and update it manually myself while being hooked up as a PC data mode, etc. I'm not even sure that would work. Any suggestions?
Last official update was 4.1.2 for your phone. Not sure if there is even a custom 4.4 rom to try like CyanogenMod. But talk and text are working and just not the internet or nothing is working? When you go into Settings / About Phone / Status is the IMEI displaying right? Does it show your phone number? In the About Phone section is the baseband displayed? Does it show signal bars or a 0 with a line through it?