[Q] baseband - Optimus One, P500, V General

I know that roms for the p500 are compatible with the p509 because they both basically use the same hardware. Does this also apply to basebands? Can i flash a baseband (http://forum.xda-developers.com/showthread.php?t=1149530&highlight=baseband) on my p509 (im asking this because the baseband, as i understand, is a whole different part of the phone)

bump
anyone know?

sweetnsour said:
I know that roms for the p500 are compatible with the p509 because they both basically use the same hardware. Does this also apply to basebands? Can i flash a baseband (http://forum.xda-developers.com/showthread.php?t=1149530&highlight=baseband) on my p509 (im asking this because the baseband, as i understand, is a whole different part of the phone)
Click to expand...
Click to collapse
It's better you post this question in that Baseband thread itself. You'll get answers surely.

sweetnsour said:
I know that roms for the p500 are compatible with the p509 because they both basically use the same hardware. Does this also apply to basebands? Can i flash a baseband (http://forum.xda-developers.com/showthread.php?t=1149530&highlight=baseband) on my p509 (im asking this because the baseband, as i understand, is a whole different part of the phone)
Click to expand...
Click to collapse
No don't flash p500 baseband. Not compatible. P509 has different set of frequencies I think.
P509
GSM850, GSM900, GSM1800, GSM1900,
UMTS1700, UMTS2100
P500
GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
Some change in 3g I think.
Sent from my LG-P500 using XDA Premium App

bump:
is there any baseband's that are compatible or are specifically for the p509?
i say this because i have tried the p500 basebands on my p509 and to my understandings everything works good except for my MMS the size is always super small! n to what i have research it says because when the MMS is coming trough it can't tell which phone i have so it minimizes the pictures so that it can be compatible to every phone!

I've flashed both the v20c and v20g basebands from the P500 onto my P509. No problems at all except that 2.3.3 sucks
I've always flashed back to the TMO v10s baseband when I want to downgrade so I can't comment on the P500 old baseband.
Odd behavior occurs when you try to use TMO Flex.db (edited of course) Flex.xml and apns list on the new baseband. Only 3 buttons appear on the stock LG 2.3.3 Launcher. No biggie since I always use a third party launcher.
@ mona - You've asked about the mms in 2 different posts.... Go SMS solves the issue.

You can try extracting the baseband files from KDZ and replacing them in the baseband folder that Dr.notor provided
Sent from my LG-P500

terratrix said:
You can try extracting the baseband files from KDZ and replacing them in the baseband folder that Dr.notor provided
Sent from my LG-P500
Click to expand...
Click to collapse
the problem is, i dont think there is a kdz file for the p509 stock rom
EDIT: nvm, i found it

Related

[Q] no operator signal

i was usig custom 2.3.3 rom and then i downgraded it to 2.2.2 default rom via nand's backup...
the phone is not connecting with the operator signal.
then i installed cyanogen 2.3.5 still the phone is not getting signal
if i select search for networks it says error while searching..
plz help what to do
you have to flash old baseband too http://forum.xda-developers.com/showthread.php?t=1149530
bullet_freak said:
i was usig custom 2.3.3 rom and then i downgraded it to 2.2.2 default rom via nand's backup...
the phone is not connecting with the operator signal.
then i installed cyanogen 2.3.5 still the phone is not getting signal
if i select search for networks it says error while searching..
plz help what to do
Click to expand...
Click to collapse
Downgrade baseband. Search in general forum
Sent from my LG-P500
please can u tell which baseband is applicable in my case..?
is it v20G or v10E?
thanks my phone is working properly now
bullet_freak said:
please can u tell which baseband is applicable in my case..?
is it v20G or v10E?
Click to expand...
Click to collapse
Is reading so tough??? It is given clearly in the thread's first post.
Do NOT proceed until you fully understand the following:
- P500-v20G-baseband.7z is for official v20[abdg....] ROMs and ROMs based upon it (e.g., GingerLOL, v20G stock ROM, customized v20G ROM, 0x0v3rfl0w ROM and GingerCriccoROM).
- P500-v10E-baseband.7z is for all other ROMs.
You've to downgrade to v10E.
[EDIT]: Saw your post. Glad that is is working fine now.
i knew its mentioned but its mentioned customized v20G ROM
so i was confirming that cyanogen comes under 20g or 10e
i did it wth 10e only
You could also flashed the rom with kdz and that way the old baseband would be written automatically.

Looking for stock Baseband for me Koodo Optimus One from Koodo

Hello all i just got this LG optimus one with a red ring around the edge from Koodo and it came with FW version V10v then i flashed Mik's CM7.1 ROM and forgot to do a NAND backup and now my baseband isen't working properly and was wondering if anybody knew where i can find a Baseband that actully works and will work with my phone
Man this phone is alot harder to mod and stuff then my Nexus S
CptKlink said:
Hello all i just got this LG optimus one with a red ring around the edge from Koodo and it came with FW version V10v then i flashed Mik's CM7.1 ROM and forgot to do a NAND backup and now my baseband isen't working properly and was wondering if anybody knew where i can find a Baseband that actully works and will work with my phone
Man this phone is alot harder to mod and stuff then my Nexus S
Click to expand...
Click to collapse
try miks baseband fix at first everything seems harder but then its easy.
try to refer drnotor flashing baseband thread or daxelectro flashing baseband thread it will help you and your problem will be solved.
they have the baseband file included in the thread
CptKlink said:
Hello all i just got this LG optimus one with a red ring around the edge from Koodo and it came with FW version V10v then i flashed Mik's CM7.1 ROM and forgot to do a NAND backup and now my baseband isen't working properly and was wondering if anybody knew where i can find a Baseband that actully works and will work with my phone
Man this phone is alot harder to mod and stuff then my Nexus S
Click to expand...
Click to collapse
I don't think you need to flash baseband. The firmware you mentioned and Mik cm uses same baseband. Its just version 20x series that come with new baseband. Btw, there is a thread on original Nand back up also. Just download the backup and restore.
http://forum.xda-developers.com/showthread.php?p=13990818
But first you should try to Reflash.
Sent from my LG-P500 using Tapatalk
I have tried reflash and i also tried Matts CM 7.1 mod and both are the same it shows a baseband of V07u-000-000-MAR-23-2009 i can still get calls and texts but no data and i found that thread about the stock nand back up but thats for the indian version or does that not matter
Check your apn settings. And yeah, nandroid backup is for an Indian ROM. But there are only 2-3 Indian apps which you can always uninstall via titanium backup application.
Sent from my LG-P500 using Tapatalk

Flash P509 2.2 to P500 2.2 to 2.3?

I've flashed my P509 to P500 stock rom before and am wondering if I could upgrade the fw to gingerbread using the lg fw updater or kdz. I know that gb uses a different baseline, so I could also upgrade my v10e to v20g. I'm afraid of bricking it since I've read a few threads that say that you can't flash different baseline fw.
wetwilly5519 said:
I've flashed my P509 to P500 stock rom before and am wondering if I could upgrade the fw to gingerbread using the lg fw updater or kdz. I know that gb uses a different baseline, so I could also upgrade my v10e to v20g. I'm afraid of bricking it since I've read a few threads that say that you can't flash different baseline fw.
Click to expand...
Click to collapse
baseband not baseline and no I wouldn't recommend it.
http://forum.xda-developers.com/showpost.php?p=19050819&postcount=10
wetwilly5519 said:
I've flashed my P509 to P500 stock rom before and am wondering if I could upgrade the fw to gingerbread using the lg fw updater or kdz. I know that gb uses a different baseline, so I could also upgrade my v10e to v20g. I'm afraid of bricking it since I've read a few threads that say that you can't flash different baseline fw.
Click to expand...
Click to collapse
1.st of all, it will not brick your phone, (if its p500 or P509)
and also if you flash it, it will give you no signal as you have not the correct lib's,
or it won't even boot up.
and just to give you knowledge its baseband // Cheers
SWEATTAIMI said:
1.st of all, it will not brick your phone, (if its p500 or P509)
and also if you flash it, it will give you no signal as you have not the correct lib's,
or it won't even boot up.
and just to give you knowledge its baseband // Cheers
Click to expand...
Click to collapse
Did you read the link in my post? It boots and works!! P500 baseband is simply missing the 1700mhz spectrum that the P509 uses for 3g.

[Q] Can't Save APNs in Custom Roms

hey XDA peeps,
Seasoned Android modifier here.
Got a LG Optimus One from Telus (Canada) (P500h), came with 2.3.3 .
I can root it, flash custom Roms, Flash the Baseband Fix, Flash a custom Kernel and restore it back to Stock 2.3.3.
The only thing I can't make it do, is make my custom ROMs save my Rogers Wirelss APNs !!!
I can't seem to find a KDZ file for the V10 (2.2.1) firmware and two of us cannot figure out how to flash the DZ files, (Cannot Find Monitor Port?? Tried 2 different computers). From my understanding, its best to start from the 2.2 Software, but I can't find it for my P500h Telus Canada.
I see that I am not the only one who is having the APN Problem.
So what I'm asking is
A) How do I fix this APN not saving issue
B) Which CM ROM should I flash that does not have this issue
Thanks!
You have to downgrade your baseband to old one then you can save apn ...
Flash cm6.5.8 it is stable
Sent from my LG-P500 using XDA App
So, i gather that the zip file ive been flashin via CWM called "baseband fix" is not downgrading my baseband.
Is this a file I have to flash via KDZ? Can anyone link me to the file? I've looked high and low for such a file.
Miguel
solar_burn said:
So, i gather that the zip file ive been flashin via CWM called "baseband fix" is not downgrading my baseband.
Is this a file I have to flash via KDZ? Can anyone link me to the file? I've looked high and low for such a file.
Miguel
Click to expand...
Click to collapse
Personally, I hate CM because of old baseband.
And, don't use the XDA search option, use google.. my best friend you know
http://forum.xda-developers.com/showthread.php?t=1217504
Go there!
And If you wan't to stay on new baseband and still have a good ROM, go here:
http://forum.xda-developers.com/showthread.php?t=1208215
You're welcome,
I would like you to press thnx
Thanks guys, last time i installed that rom it failed miserably. I tried again and it works great and it seems i didn't need to flash the new baseband coming from the stock 2.3.3 software.
Thanks a lot!
Sent from my GT-I9100 using xda premium

no 2g after flashing adfad666's cm 7.2 with telus p500

im guessing i cant get 2g because telus's 2g was cdma? im on the old .32 baseband and flashed that version of cm7. does anyone know where i can get just the radio or baseband for telus to flash over this rom?
this is my pay and go phone so i dont need 3g data and 2g gives me better reception and battery life so i want to be able to leave my optimus on 2g all the time.
EDIT: i just tried flashing P500-v10E-baseband.7z from this thread and have the same results
u had to change the rom, not the baseband....
ccdreadcc said:
u had to change the rom, not the baseband....
Click to expand...
Click to collapse
From what I gathered in the abandoned thread for AdFad666's rom, future builds may only exclusively support the new baseband.
Of course, I could be wrong, since it seems like the A-series and F-series are still being updated.
In any case:
neotekz said:
i just tried flashing P500-v10E-baseband.7z from this thread and have the same results
Click to expand...
Click to collapse
OP, did you confirm that you're on the correct baseband?
You can either throw the phone back on LGMDP (it'll display a version in the window) or hop down to a rom that has the LG hidden menu.
Also, what happened to the backup that was made when you flashed to v20G?

Categories

Resources