PDA:S5830LUBKP7
Phone:S5830LUBKP7
CSC:S5830LUUBKP7
http://www.mediafire.com/?2vha3ndq7jaa282 NEW MIRROR
install via ODIN.
Works Fine to me for now.. without black screen. Wifi Works Fine too..
Click on Thanks if you like.
ROOT:
put the file on SD card and open on Recovery MODE (HOME+POWER) (Thanks ilarrain)
davebyone said:
PDA:S5830LUBKP7
Phone:S5830LUBKP7
CSC:S5830LUUBKP7
http://www.multiupload.com/V99KK6S3RI
install via ODIN.
Works Fine to me for now.. without black screen. Wifi Works Fine too..
Click to expand...
Click to collapse
Great news!!! I have installed and works fine with my ACE L version, the 3G connection works fine (my operatos works in 1900MHz frec)
This is the information in samsung kies
The downloaded file is an EXE, run and get a TAR file, flash with ODIN with signle package option.
If you come from 2.2.1 is very important to flash another samfirmware ROM such KPH, then flash this.
If you come from 2.3 don't worry.
And good news, this is original and appears in Samsung Kies, look
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 July 13
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
The portuguese BR present in this firmware ???
Thanks
schossler said:
The portuguese BR present in this firmware ???
Thanks
Click to expand...
Click to collapse
Yes, have English/Spanish/Portugese and other (not know for me)
Thanks for it! I've just installed it and it's working fine. Anyways, it seems I can't use it with some custom roms because of the modem (I installed coderom v2x and 3g it's not working again, just like kph) So I guess I'll wait to install it again till there are some custom roms for it.
Thanks! It work greats anyways!.
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
jilllmoni said:
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
Click to expand...
Click to collapse
Couse i'm from chile, and both kpn and kph have problems with 3g (I have to deactivate it to get the cellphone to work) And kp7 works great with that =)
root this version?
axelmaan said:
root this version?
Click to expand...
Click to collapse
Yes, with AceGingerRoot, works fine
jhijman said:
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 Ju
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
Click to expand...
Click to collapse
Download the Rom u mentioned above from samfirmware . It is the official Samsung Rom for Spain , u will not regret after flashing . It is best available stock Rom untill now .
"help to get helped"
axelmaan said:
root this version?
Click to expand...
Click to collapse
you can root with this file on recovery mod. HOME+POWER BUTTON (thanks for ilarrain)
luisjoseb said:
Yes, with AceGingerRoot, works fine
Click to expand...
Click to collapse
Thanks!, whit cwm update from sd ! and ready?
axelmaan said:
Thanks!, whit cwm update from sd ! and ready?
Click to expand...
Click to collapse
yep!!! this is it
I think something is wrong ! I tried to download the file but Norton said it was virus and deleted the file.. are you sure it s original file ? Does anybody have same problem with me ?
cazorla41 said:
I think something is wrong ! I tried to download the file but Norton said it was virus and deleted the file.. are you sure it s original file ? Does anybody have same problem with me ?
Click to expand...
Click to collapse
maybe it happens because the file extension is .exe
but this is a win rar extract with a .tar file inside.
jhijman said:
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 July 13
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
Click to expand...
Click to collapse
Nop, in SamFirmware only appear the Global Version, this firmware is for the L version, not for the Global, B or T, only for L, this device update to Ginger this day, this is and original firmware and the LatinoAmerican Users with unbranded devices see this update via samsung kies, in the second post I put a screen capture.
For the B and T version exist the 2.3.4 from Vivo Brazil, search in this forum if you want to download it
luisjoseb said:
For the B and T version exist the 2.3.4 from Vivo Brazil, search in this forum if you want to download it
Click to expand...
Click to collapse
And you can also use the Vivo FW unbranded, just don't flash the csc file.
jilllmoni said:
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
Click to expand...
Click to collapse
Because their network in South America uses a different baseband. Thus, different firmware, drivers etc...
works fine! (entel chile)
Related
Hi, I've just gotten my galaxy ace for 3 days. I updated my fone to gingerbread using S5830XXKPE and odin from samfirmware. It's been restarting/shutting down by itself after the update so I wanted to downgrade to froyo again but I tried downloading and flashing a lot of other versions but, no luck. It hangs and stays at the "Galaxy ace" part of the boot and doesn't open. But whenever I flash it back to S5830XXKPE, it opens and works but I think it is bugged and I really cannot downgrade to other firmwares. Is anyone else having the same problem??? Help please >_<
Update:
I've successfully flashed it with S5830XXKPB but still its GB 2.3.3, I still can't flash it with froyo 2.2.1 firmwares. help pretty pleaseeeee...
Download a multipackage 2.2.1 firmware, one that when you unzip it will have several files. You probably flashed a single package .tar that caused the brick.
A single package update contains only some files to be replaced over the original 2.2 firmware and is not the full rom so you'll have to flash a multi package then update to your desired single package.
XDA ♥
Thanks for replying. Actually I'm using odin multidownloader 4.38 and yes, I did use the multipack not a single .tar.
Here are the list of firmware I've downloaded and used to flash my phone but unsuccessful all attempts: (and some firmware I've deleted because of anger lol) )
S5830XXJLC
S5830XXKA7
S5830XWKB7
S5830XXKC1
and now these two are the ones that boot up when I flash on my phone: (both GB)
S5830XXKPE
S5830XXKPB
I did successfully downgrade from 2.3.4 to 2.2.1 though. I believe the firmware from Samfirmware.com will have labelled "MULTI-CSC" or something like it.. I can't check now it's midnight here and sleeping time...
XDA ♥
okay, I'll try that too. Imma download 2.3.4 from samfirmwares then try downgrading to froyo. I'll tell ya how it goes. (crosses fingers) )
Successfully flashed to 2.3.4 but downgrading...no luck. What could be the problem...ohhhh maaaannnn!!! >_<
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link http://hotfile.com/dl/112095746/7fef9f5/S5830XWKB7.rar.html
imranaryan said:
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link http://hotfile.com/dl/112095746/7fef9f5/S5830XWKB7.rar.html
Click to expand...
Click to collapse
yeah, actually I tried that exact firmware S5830XWKB7 posted above. I think I'll just have it returned to where I got it. thanks for the replies people
It was I'm ly after rooting that i had the restart issue and only when titanium backup was using super user access. After upgrading super user in the market everything was fine after that - v2.3.4 running sweet now.
Sent from my GT-I9000 using XDA App
viper353 said:
yeah, actually I tried that exact firmware S5830XWKB7 posted above. I think I'll just have it returned to where I got it. thanks for the replies people
Click to expand...
Click to collapse
S5830XXKA6 was what I used. But oh well it would always be better to get a fresh phone
they said they'll just call me to get the new phone when it arrives.
imranaryan said:
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link
Click to expand...
Click to collapse
Successfully downgrade my gingerbread to froyo, although it is not the stock rom i guess..thanks to the poster.
You could still update by flashing to the new one from the older multi-package.
XDA ♥
sobirin90 said:
Successfully downgrade my gingerbread to froyo, although it is not the stock rom i guess..thanks to the poster.
Click to expand...
Click to collapse
Instead of saying thanks clicking on the thank button will be highly appreciated
Not to threadjack or anything but I did downgrade from 2.3.4 down to 2.1 XWKB7 everything works fine, Im on my correct CSC and the apn was preconfiged like it should be but when i connect to kies It says that it cant update my phone and marks my CSC as SER (wich it was with 2.3.4) but according to *272* Im using NEE
(wich is nordic as best I can gather)
Hope you guys understand this mess
Well do you have a nandroid backup of your system, data, etc?
No, I thought nandroid wasn't an option for us yet?
I have the correct csc and modem but its not the same PDA I have kb7 but stock was kc2
Just to update, kies was in a better mood today than yesterday and saw that I had the correct CSC and gave me an upgrade to stock
albertbm said:
not to threadjack or anything but i did downgrade from 2.3.4 down to 2.1 xwkb7 everything works fine, im on my correct csc and the apn was preconfiged like it should be but when i connect to kies it says that it cant update my phone and marks my csc as ser (wich it was with 2.3.4) but according to *272* im using nee
(wich is nordic as best i can gather)
hope you guys understand this mess
Click to expand...
Click to collapse
thank you <3 <3 <3 <3 <3
ODIN 4.38 can´t flashing? (mibip or startup?)
When you have problem with downgrade or upgrade firmware thrue ODIN and you are user WIN7 ---
- You can use to flash only one firmware!!!!
(it does not matter which, !!!! BUT you must going UP and DOWN,UP,DOWN like this(2.3.4 to 2.2.1 to 2.3.4 to 2.2.1)
----No like this (2.3.4 to 2.3.4 it doesn´t work) )
- You must after every re-flash--------reboot your PC !!!!!
- Your ODIN 4.38 stop at -- download mibib or something else? It´s my problem too
- After restart everything is O.K.and NOW ODIN doing everything to
I´m used this firmwares : - S5830XXKC1 COOPER.OPS CSC - S5830SERKB3 2.2.1 2011 March 19
h.t.tp://hotfile.com/dl/111959706/1f7adaa/S5830XXKC1.rar.html (without dots)
- S5830XXKPH COOPER.OPS CSC - S5830SERKPH 2.3.4 2011 June 2
h.t.tp://hotfile.com/dl/120302147/b6ef9dc/S5830XXKPH.rar.html (without dots)
Password is samfirmware.com
Sorry my english language is bad, but I think so it´s a big problem with little solution
Bye
S5830XWKPN_FOP
Code:
http://www.multiupload.com/Y643XGWMMN
Pass: sampro.pl
What has better this FW?
Also available on Samfirmware
http://hotfile.com/dl/124821364/f954487/S5830XWKPN_S5830XWKP6_S5830OXXKP7.rar.html
Pass : samfirmware.com
most importantly..wake from sleep lag fixed?
johnsonxray said:
most importantly..wake from sleep lag fixed?
Click to expand...
Click to collapse
If you're talking about SOD, then most probably. I haven't encountered it in the last... 10 hours.
WakeUp lag is reduced, but still it's not fast as in Froyo. In froyo, wakeup was immedietly, in GB there is lag about a second long.
Danggelo said:
What has better this FW?
Click to expand...
Click to collapse
If you're talking about "patch notes" or changelog on this, then probably the following:
Wake-up / Lock button is more responsive. Means it's a lot faster here in KPN than in KPH or the old 2.3.3 leaked rom (obviously since KPN is now an official release)
Apps compatibility. Swiftkey X, Viber, Whatsapp, Slice It and others doesn't force close now after restarting the phone. Or I'm just lucky and have not experienced this yet. But definitely a bug fix somewhere inside the firmware.
Connects faster to wifi.
I'm yet to find out more since I just flashed this KPN 30 minutes ago. Was using KPL since last night.
Hi All,
How to flash this FW? After extaction I don't find any FW files like APBOOT, CSC, etc..
Please help.
Diliban said:
Hi All,
How to flash this FW? After extaction I don't find any FW files like APBOOT, CSC, etc..
Please help.
Click to expand...
Click to collapse
It is a One Package. So select copper.ops then click one package, then flash but remember make sure you're current firmware is 2.3.3 or it will hang on system.rfs
Jekle_Ace said:
It is a One Package. So select copper.ops then click one package, then flash but remember make sure you're current firmware is 2.3.3 or it will hang on system.rfs
Click to expand...
Click to collapse
.
Thanks Jackie... Luckly I flashed 2.3.3 KPE yesterday to test the rom with CF-ROOT. Will test this with CF-Root and let you know the feedback...
Diliban said:
.
Thanks Jackie... Luckly I flashed 2.3.3 KPE yesterday to test the rom with CF-ROOT. Will test this with CF-Root and let you know the feedback...
Click to expand...
Click to collapse
It will not work with CF-Root. Only KPH ATM. And My real name is Liam. Not Jackie.
After flashing with the new firmware, the updated FW doesnt do a media scan on the default "media" folder. Ignoring all music inside the folder, mp3 or aac alike. Weird.
cr0ssx21 said:
After flashing with the new firmware, the updated FW doesnt do a media scan on the default "media" folder. Ignoring all music inside the folder, mp3 or aac alike. Weird.
Click to expand...
Click to collapse
Did you do a wipe of data and cache before flashing?
chinoyray said:
Did you do a wipe of data and cache before flashing?
Click to expand...
Click to collapse
Solved it. Went to Systems > Applications > All > and wiped the user data of Media Storage app. Thanks for the reply.
Diliban said:
.
Thanks Jackie... Luckly I flashed 2.3.3 KPE yesterday to test the rom with CF-ROOT. Will test this with CF-Root and let you know the feedback...
Click to expand...
Click to collapse
CF-root works. I just hope someone can figure out a deodex for this.
Jekle_Ace said:
It will not work with CF-Root. Only KPH ATM. And My real name is Liam. Not Jackie.
Click to expand...
Click to collapse
Thanks Liam....
How to flash XWKPN 2.3.3 for Galaxy Ace?
there is only one file in the zip package, how to flash it?
neal2point0 said:
there is only one file in the zip package, how to flash it?
Click to expand...
Click to collapse
read the post that I did on the first page. Bone Idle.
what do you mean by "then click one package"?
First i need to select OPS file and then ?
kindly help me!
Hello. Im from the Philippines. I'm planning to upgrade my SG Ace to Gingerbread. What should be the the Baseband Version compatible with my phone?? Im confused!
Calling out all Noypis here..
droidtwoseven said:
Hello. Im from the Philippines. I'm planning to upgrade my SG Ace to Gingerbread. What should be the the Baseband Version compatible with my phone?? Im confused!
Calling out all Noypis here..
Click to expand...
Click to collapse
Which baseband is working your company??
yoyigo07 said:
Which baseband is working your company??
Click to expand...
Click to collapse
I don't know based band version should I use, that's why I'm asking.
I heard that KPN is 2.3.3 is running okay for some users, but samfirmware provide only one package file, as I had read some forums using one package for flashing is not that secure and it can brick your phone.
droidtwoseven said:
I don't know based band version should I use, that's why I'm asking.
I heard that KPN is 2.3.3 is running okay for some users, but samfirmware provide only one package file, as I had read some forums using one package for flashing is not that secure and it can brick your phone.
Click to expand...
Click to collapse
You can't brick your phone flashing one package, only using ROM MANAGER can do that...
And KPN will work if your company works in 2100 mhz baseband, for that I asked you the baseband of you operator. If you can't answer that, nobady will help you
yoyigo07 said:
You can't brick your phone flashing one package, only using ROM MANAGER can do that...
And KPN will work if your company works in 2100 mhz baseband, for that I asked you the baseband of you operator. If you can't answer that, nobady will help you
Click to expand...
Click to collapse
Hmmm, can you tell me more about "2100 mhz baseband" thing? Do you mean my service provide? Like on the simcard?
) I'm a newbie about this android stuffs so please bear with me, thanks a lot!
You won't be able to directly flash the one package if you are on different platform, like 2.2 flashing 2.3 one package. But if you're already on 2.3 one package has no problems.
consegregate said:
You won't be able to directly flash the one package if you are on different platform, like 2.2 flashing 2.3 one package. But if you're already on 2.3 one package has no problems.
Click to expand...
Click to collapse
Hey! I'm on Froyo 2.2.1 right now and planning to updgrade to 2.3.3. This means I cannot use "one package" for flashing, right?
You can use KPN as your baseband for upgrading then apply custom roms that suites you . Even if your KPN is from russia or what it doesn't matter. (I hope I helped you in a way )
droidtwoseven said:
Hmmm, can you tell me more about "2100 mhz baseband" thing? Do you mean my service provide? Like on the simcard?
) I'm a newbie about this android stuffs so please bear with me, thanks a lot!
Click to expand...
Click to collapse
Search the baseband of your company. For example, my company works in 1900 mhz (Entel Chile)
any baseband works as far as the released roms are concerned. if you're planning to use one package KPN, upgrade to another 2.3.3 rom first like KPE
mundixx said:
any baseband works as far as the released roms are concerned. if you're planning to use one package KPN, upgrade to another 2.3.3 rom first like KPE
Click to expand...
Click to collapse
Do you mean I should flash KPE first using "full-package" before I flash to KPN using "one-package"???
droidtwoseven said:
Do you mean I should flash KPE first using "full-package" before I flash to KPN using "one-package"???
Click to expand...
Click to collapse
that is correct.. oh, and when you're done flashing KPN, you might encounter a frequent force close on an android process.. that's ok, all you need to do is to go to recovery mode and wipe data and cache
KPH is the latest version (2.3.4) which theoretically should be better than KPN (2.3.3), but i have found many ROMS's have KPN as their base & these ROM's are supposed to be the fastest & stable of all ROM's . I am using the latest 2.3.4 KPH Stock ROM provided by Samsung ; & so m confused to which ROM should i go for , those based on KPH or KPN. Please guys if anyone can help me much appreciated (even though i m sound dumb to some people !!)
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
chinoyray said:
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
Click to expand...
Click to collapse
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
nilzkul said:
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
Click to expand...
Click to collapse
flash a full package KPN
setya5785 said:
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
flash a full package KPN
Click to expand...
Click to collapse
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
nilzkul said:
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
Click to expand...
Click to collapse
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Lenks said:
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Click to expand...
Click to collapse
You need the Cooper_v1.0.ops and then enable one package. Afterwards select the zip in one package.
You can download everything here.
Note that you have to extract the first zip folder until there's only one zip left which is called S5830XWKPN_S5830XWKP6_S5830OXXKP7_HOME
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
The only new feature kph 2.3.4 has that is not present in kpn 2.3.3 is the video chat in gtalk.
Galaxy Ace users cant even use that feature because the phone does not have a front facing camera.
That is why a lot of ROMs are based on KPN. For the reason that most bugs have been fixed and Samsung has ironed it out already.
Sent from my GT-S5830 using xda premium
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
Use stock then.
Cheers
setya5785 said:
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
Click to expand...
Click to collapse
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
nilzkul said:
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
Click to expand...
Click to collapse
That's correct. Baseband of KPN is KP6
Cheers
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
use stock KPN. been using it for a long time. the custom ROMs are bringing back SOD.
Hey, but kpn will work correctly here on america? Do you know?
I'm using kph with latinoamerican modem, is something like that on kpn?
THanks
catapult1234 said:
That's correct. Baseband of KPN is KP6
Cheers
Click to expand...
Click to collapse
cheers
Everything went smooth
thnx mate
now i am running GR ACE 1.1.0 KPN
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
I have flashed fla.sh X2 on top of KPH (even though the author said it's KPN-based), and I have yet to encounter problems such as SoD's, FC's and such. I don't if I'm just lucky or it's something I did, but I can't seem to recreate the SoD problems (but I try, though).
Sent from my GT-S5830 using XDA App
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
JonnyBoy6 said:
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
Click to expand...
Click to collapse
Android 2.3.4 is on par with KPH, so it doesn't seem like you are outdated.
But if I were you, just to be safe, I'd still flash it with KPH or KPN if I wanted to use a custom ROM.
I'm sorry for asking, but which country are you from? (Can't see the flag under your avatar as I'm browsing through my phone).
Sent from my GT-S5830 using XDA App
http://www.samfirmware.com/apps/blog/show/8265932-new-arabic-roms
for those interested
i have flashed my ACE on friday through KIES. it is now 2.3.3 S5830XWKP7 baseband and build number JPKP9. not that big difference from froyo...
nice news man , the rom is available now.
can i flash this new arabic rom and then flash fla.sh X2 rom?
Finally it is out!
Any method or results about Root, Deodex and ClockWorkMod ?
thanks
thanks good news
The rom at samfirmware has a missing file which results in a bricked phone ... I've tried it myself and it didn't work unfortunately !
i have try it it succesfully boot..work perfecly
B4ZT said:
i have try it it succesfully boot..work perfecly
Click to expand...
Click to collapse
did the download include the modem file ?
the file which you browse for at the phone in Oden ?
no man..just blank it in phone sectiom mode it will work but if you want new base band KP7 update via kies..i have try both and work
and i use KP7 now until someone develop make custom rom from arabic fw
hello man,
do you have arabic support in your SGA, and which version of android ?
Custom ROMs have it
And change the title , it's misleading .
EmoBoiix3 said:
Custom ROMs have it
And change the title , it's misleading .
Click to expand...
Click to collapse
Not misleading if it's August xD
It just got bumped up.
consegregate said:
Not misleading if it's August xD
It just got bumped up.
Click to expand...
Click to collapse
OMG I'm so blind