Related
I installed the webtop over hdmi mod on my Atrix and while testing it out, it got very warm in my hand. I opened the setcpu app and noticed that while overclocked to 1.3GHz, the CPU was running at 75C! I lowered it back down to the stock 1GHz and the temp slowly went down and settled at 63C.
It seems that while in webtop mode, the CPU is taxed at 100% all the time so I'm wondering if it's safe to stay overclocked when using webtop.
Everyone has different opinions of what is too hot around here.
IMO the cooler the better. IMI No Atrix should have a temp above 60c and I'm not even comfortable with above 50c either...
Sent from my MB860 using xda premium
I have experienced the same problem and worried that something may fry.... I have had mine overclocked at 1.45 using debian linux and all of a suddent he phone freezes and restarts.... Since it did it to me the second time I have kept my phone at 1Ghz... I am new at this so please don't beat me up too bad for being a noob... Just want to see if maybe undervolting it a little might help or hurt it?
Thanks in advance
Here are some tips I can offer
1.Try re-flashing your custom kernel and see if that fixes the web-top thing and over heating
Whenever the phone is plugged to the web-top it will naturally overheat so it's kinda expected remember now it's gotta work harder since its displaying on lap-dock or TV,but if you can cook an egg on it it might be too hot...lol
2.Set profile for temperature on setcpu so this way once you reach for example 100F your phone will clock down a little and so it might help the heat issue.You can set even more than one temp profile so this way when it reaches 96 it goes down a little then when it reaches 100 it will clock down a little more and such.
3.If that doesn't help,which in my situation it did.Flash a different kernel mayb it's just the one you're using that is causing funny stuff to happen.
Edit: not sure but i think undervolting helps battery but causes more heat,I myself don't undervolt I just created litterally a bunch of setcpu profiles for battery level,screen off,incall,charging,temp,and time and I'm getting 13 hour days at 1.3Ghz and temp profiles have been helping by clocking down when it's too hot therefore saving battery and drastic overheating.I dontlike my phone going anything over 104F it gets me paranoid,but that's just me.
I tried reflashing the kernel but it didn't change anything. I'm using Faux's 1.3GHz overclock kernel for Gingerbread (2.6.32.9). Is there something else I should be using?
sk8trix said:
Edit: not sure but i think undervolting helps battery but causes more heat,I myself don't undervolt I just created litterally a bunch of setcpu profiles for battery level,screen off,incall,charging,temp,and time and I'm getting 13 hour days at 1.3Ghz and temp profiles have been helping by clocking down when it's too hot therefore saving battery and drastic overheating.I dontlike my phone going anything over 104F it gets me paranoid,but that's just me.
Click to expand...
Click to collapse
Do what sktrix said in rest of his post.
I use the stopgap 1.0GHz kernel, and UV does lower temperatures. I would definitely try UV'ing a wee bit. You don't need to go crazy. I am using the following with great results for both temp and battery life:
-50
-50
-75
-75
-75
-100
-100
My setcpu profile clocks it back if I reach 60C, (I idle in the low to mid 30's). Under heavy load I reach around 52C max which is quite acceptable.
Now, granted I am not using Webtop, but the end result for UV should be the same. Lower temps and better battery life. You may also want to try just using 1.0GHz when on Webtop. The phone has more than enough power at this clock speed.
There is a bug with faux's kernel that causes the webtop to clock the phone at max speeds until restart.
Sent from my MB860 using xda premium
I know I'm straying from my correct forums here, however I have an LG Optimus 2X which like the Atrix, is a Tegra 2 CPU.
Our phones get VERY hot, I have had my CPU up to 86C before I decided to back off the stress test. CPUs are very good at handling high temperatures, and IMO you will see no ill effects from doing so, I am unsure of whether or not the Tegra 2 has thermal throttling/shut down, but in my experience they should be fine to around 80C.
The only issue I can forsee is the battery, batteries HATE high temperatures and it is awful for their life span, this is why your laptop batteries turn to crap after 1-2 years, even if low charge cycles, because they are always hot.
I would not be concerned about anything in the 70C realm, at all.
Alcapone263 said:
There is a bug with faux's kernel that causes the webtop to clock the phone at max speeds until restart.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Experienced this countless times. More with the latest 1.45Ghz, but it did happen on the previous release. When I dopped the mhz with setcpu, it wont scale but stay at max cpu. It even did it a few times without using the webtop.
g2tegg said:
Experienced this countless times. More with the latest 1.45Ghz, but it did happen on the previous release. When I dopped the mhz with setcpu, it wont scale but stay at max cpu. It even did it a few times without using the webtop.
Click to expand...
Click to collapse
So which overclocked kernel is best for webtop? I too have noticed where the CPU hangs at 100% at 1.45Ghz for a while when disconnected but it is always there when im in webtop mode.... How is Faux 1.3Ghz kernel with webtop?
ericemir said:
So which overclocked kernel is best for webtop? I too have noticed where the CPU hangs at 100% at 1.45Ghz for a while when disconnected but it is always there when im in webtop mode.... How is Faux 1.3Ghz kernel with webtop?
Click to expand...
Click to collapse
It will still hang at 1.3ghz, though it's a known bug. I just stick with the 1.0 enhanced, there's no noticeable real-world difference from going over 1.0ghz anyway, it's just a benchmark gimmick. Right now, the software that's out there is optimized to run on existing hardware w/o overclocks. I've run Shadowgun at 1.45ghz and didn't see any difference over the 1.0 enhanced.
Now, if we were trying to run games that were coded specifically or faster-paced chipsets then we'd need overclocking to catch up much like you would in the PC arena. That, however, is not happening in the cell phone market just yet.
treehumper said:
I just stick with the 1.0 enhanced, there's no noticeable real-world difference from going over 1.0ghz anyway, it's just a benchmark gimmick.
Click to expand...
Click to collapse
What's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
cjrhoades said:
What's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
Click to expand...
Click to collapse
Bump.
Anyone?
cjrhoades said:
Bump.
Anyone?
Click to expand...
Click to collapse
Read the history at the following:
http://forum.xda-developers.com/showpost.php?p=15387385&postcount=1
You will see a lot more optimization than just upping the clock speed. One of the reasons the 1.0GHz kernel works much better than the stock kernel. Also, the ability to undervolt saving battery life.
IMO there is no need for 1.3GHz or 1.45GHz in everyday use of a phone. The only benefit is for OC'ing bragging rights. Until we can control phone temperatures better, it's pointless to risk the substantial heat increase on ALL internal components for extended periods of time which results from much increased CPU temperatures.
CaelanT said:
Read the history at the following:
http://forum.xda-developers.com/showpost.php?p=15387385&postcount=1
You will see a lot more optimization than just upping the clock speed. One of the reasons the 1.0GHz kernel works much better than the stock kernel. Also, the ability to undervolt saving battery life.
IMO there is no need for 1.3GHz or 1.45GHz in everyday use of a phone. The only benefit is for OC'ing bragging rights. Until we can control phone temperatures better, it's pointless to risk the substantial heat increase on ALL internal components for extended periods of time which results from much increased CPU temperatures.
Click to expand...
Click to collapse
I see... guess that explains why the phone doesn't really feel any faster when it's overclocked. I'll flash the 1GHz kernel then.
Thanks for the info.
Not sure if this is the same with phones but normally a CPU should stay at 40C idle and 50C load. Maximum would be 60C while benching or something.
If it goes above that I would definitely underclock/undervolt.
cjrhoades said:
what's the advantage to running a custom kernel if you're not overclocking? Forgive me if this is a stupid question lol. Still a noob.
Click to expand...
Click to collapse
also has other fixes besides overclocking you can go read them in the kernel threads
First of all, I got interested in overclocking because I've read that it helps boost the performance of android devices.
Now, Having no experience at all, I have some queries and questions about this feature:
1. Supposing that I have already downloaded an OC with my preferred frequency, Do I have to flash to be able to apply an OC Kernel in my device? Or do I just have to update it from CWM?
2. What does this term mean? :
"use no-Frills for OC and I/O setting"
3. If ever the OC I have applied is unstable, how would I be able to revert it to 600MHz again?
I hope you guys could help me with my doubts.
Thanks in Advance!
Dude never overclock a device...it decreases the life of the device and who the heck told u that improves the performance of the device???It doesn't improve just causes more problems!!!!!
Hit The Thanks Button if I have Helped.
vipaman said:
Dude never overclock a device...it decreases the life of the device and who the heck told u that improves the performance of the device???It doesn't improve just causes more problems!!!!!
Hit The Thanks Button if I have Helped.
Click to expand...
Click to collapse
Stop lying . It may decrease the life of your device if you overclock dangerously (too high for the processor to handle). It does increase performance.
JakeJester said:
First of all, I got interested in overclocking because I've read that it helps boost the performance of android devices.
Now, Having no experience at all, I have some queries and questions about this feature:
1. Supposing that I have already downloaded an OC with my preferred frequency, Do I have to flash to be able to apply an OC Kernel in my device? Or do I just have to update it from CWM?
2. What does this term mean? :
"use no-Frills for OC and I/O setting"
3. If ever the OC I have applied is unstable, how would I be able to revert it to 600MHz again?
I hope you guys could help me with my doubts.
Thanks in Advance!
Click to expand...
Click to collapse
1. You just set your frequency in the app.
2. No frills is an app. Whoever stated that is just saying you should use that app to do it (thier preference).
3. If you use SetCPU, you can create an update.zip file which allows you to set it back to the default frequency via recovery (if your device can't boot).
vipaman said:
Dude never overclock a device...it decreases the life of the device and who the heck told u that improves the performance of the device???It doesn't improve just causes more problems!!!!!
Hit The Thanks Button if I have Helped.
Click to expand...
Click to collapse
Are you sure? This is far contrary in the threads that I've read. Does anyone else agree with this?
Totally confusing. HELP!!
It's ur device ur wish. Any overclocking involes a lot of danger. Set it too high for the cpu to handle it might explode(personal experince). I overclocked my device and it exploded....So it's ur wish.
Hit The Thanks Button if I have Helped.
Theonew said:
Stop lying . It may decrease the life of your device if you overclock dangerously (too high for the processor to handle). It does increase performance.
1. You just set your frequency in the app.
2. No frills is an app. Whoever stated that is just saying you should use that app to do it (thier preference).
3. If you use SetCPU, you can create an update.zip file which allows you to set it back to the default frequency via recovery (if your device can't boot).
Click to expand...
Click to collapse
Phew! At last. Something worth reading.
Thanks for the answers! But I have another follow up question.
I found this thread :
[kernel] Cm7 OC kernel with all feature
So what does this mean? Why do I have to download it from there instead of using the app to change the frequency?
JakeJester said:
Phew! At last. Something worth reading.
Thanks for the answers! But I have another follow up question.
I found this thread :
[kernel] Cm7 OC kernel with all feature
So what does this mean? Why do I have to download it from there instead of using the app to change the frequency?
Click to expand...
Click to collapse
Because not all kernels have OC/UC capabilities. You have to download and flash a kernel that allows it.
lowandbehold said:
Because not all kernels have OC/UC capabilities. You have to download and flash a kernel that allows it.
Click to expand...
Click to collapse
Yeah right! I forgot about that.
Maybe my Samsung Galaxy Fit doesn't have that capability that's why they created that thread in our section.
Thanks for the reply!
JakeJester said:
Yeah right! I forgot about that.
Maybe my Samsung Galaxy Fit doesn't have that capability that's why they created that thread in our section.
Thanks for the reply!
Click to expand...
Click to collapse
It is capable. That kernel will allow it.
Yes you can revert back to 600mhz, but as everyone else has said, do not overclock too far.
Sent from my HTC Inspire 4G using XDA App
vipaman said:
It's ur device ur wish. Any overclocking involes a lot of danger. Set it too high for the cpu to handle it might explode(personal experince). I overclocked my device and it exploded....So it's ur wish.
Click to expand...
Click to collapse
Don't overclock beyond what anyone else has had success with. Look up other's successes.
And if you can't, doing it step-by-step, ~100mHz at a time, slowly, will make it feel hot or crash before it explodes (back down if it does get hot or unstable).
Undervolting can also help counteract some of the bad parts of overclocking, without affecting performance at all. UV can, worst case scenario, cause data loss and crashing, never hardware damage, but best case scenario improves battery and device life. Again, do it step-by-step, 5V at a time, slowly, and back up when it starts acting weird
You can check this guide:
http://forum.xda-developers.com/showthread.php?t=1247213
you need to have a kernel that allows for OCing/UCing , i'm not sure if galaxy fit allows it
you'll know if it allows it or not if you'll run an app that allows for OCing/UCing, if it doesn't allow it, the maximum frequency at which you can set is 600mhz only which is the default.
My phone's rooted for the first time several days ago and the CPU is overclocked from 1Ghz to 1.7Ghz.
I suppose it depends on overclocking application. The ROM that I have includes an O/C app and there's an option called "on demand" which means even if your CPU is overclocked, it will not utilize the max clock speed all the time.
My phone actually runs at 300Mhz on standby and around 1.2Mhz when I am using it to surf, listen to music or watch a movie. I've never seen it run max 1.7Ghz.
Bro don`t overclock a device
Rumor if u overclock a device, it decreases the life of the device
c.innovation said:
Bro don`t overclock a device
Rumor if u overclock a device, it decreases the life of the device
Click to expand...
Click to collapse
It depends on your device (and kernel), plus the frequency you set it to. Also, it's based on your preference to do it or not.
ive tried every rom/kernal combination and with each i get lock ups when doing intensive cpu work such as a game or benchmark overclocked to 1.6 any ideas? Thanks
Just means your processor was built a little weak. Its only built to run at 1.2ghz so anything above that is pushing it hard... some phones can be oc'd that much, some can't. Just take it down to 1.4. I can't even get mine to 1.4 so he thankful
Sent from my AT&T cellular device.
What voltage do you have it at? Try raising it 25mV at a time stressing you cpu at each step until you're stable. That is if you are determined to run 1.6 and i would not push more than +100mV personally.
joeyzadoe said:
ive tried every rom/kernal combination and with each i get lock ups when doing intensive cpu work such as a game or benchmark overclocked to 1.6 any ideas? Thanks
Click to expand...
Click to collapse
Have you considered there is a reason that your phone was only sold as capable of 1.2 GHz?
Entropy512 said:
Have you considered there is a reason that your phone was only sold as capable of 1.2 GHz?
Click to expand...
Click to collapse
Wow... You got real issues man..The OP is just looking for some tips from others that have succeeded in getting their phones to 1.6.. You need some help buddy...
If youve nothing nice to say..
But then I guess youd never speak would you?
/end rant
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
If youve nothing nice to say..
Click to expand...
Click to collapse
Hope you heed your own advice.
Stevenrogers_420 said:
Wow... You got real issues man..The OP is just looking for some tips from others that have succeeded in getting their phones to 1.6.. You need some help buddy...
If youve nothing nice to say..
But then I guess youd never speak would you?
/end rant
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I do not think entropy is the one who has issues...
This has been discussed in 10 different threads already and in great detail. If the OP did as much as search he would of have found the answer himself. That is why they call it research
the only question left is...... You mad bro?
Keep all voltages stock, then use voltage congrol and click on 1400 and increment the slider+ 25, then do the same for 1600. This is what i had to do to get my phone stable at 1.6 Some phones may need EXTRA voltage and others need less. It takes some testing to get your particular phone stable at anything over 1.2Ghz. I only did it to see if I saw any gains. Actually for me and my phone I found as far as MY SETUP and testing many different benchmark style apps at 1.4Ghz i got better benchmarks than i did at 1.6Ghz. Now everyones phones will act sligbtly different so your mileage may vary.
Sent From My KickAss ATT SGS2 SPORTING CM7
At 1.6 ghz... your phone will be discharging your battery ON your charger... I personally wouldn't recommend doing it as it gets the phone really hot, and causes the chip lots of stress due to high heat. Personally if you need more performance (this phones pretty damn fast anyways) go to 1.4ghz.
Most of our phones can be overclocked to 1.4 and some can go to 1.6 but not all. If you change the voltages and it still craps out, then take it down a notch to 1.4 and see how that works for you.
Entropy512 said:
Have you considered there is a reason that your phone was only sold as capable of 1.2 GHz?
Click to expand...
Click to collapse
Now now. Since when do we encourage keeping things stock.
My point is - if it were guaranteed to hit 1.6, it would be sold as 1.6.
Being able to hit 1.6 is luck of the draw, pure and simple.
There's a reason:
1) OC is not default on my kernel
2) I held off on providing OC support for a while here, and NEVER released it on Infuse (users weren't mature enough to handle it over there)
3) I have a warning in GIANT RED LETTERS not to complain about OC stability issues on my kernel thread.
Entropy512 said:
My point is - if it were guaranteed to hit 1.6, it would be sold as 1.6.
Being able to hit 1.6 is luck of the draw, pure and simple.
There's a reason:
1) OC is not default on my kernel
2) I held off on providing OC support for a while here, and NEVER released it on Infuse (users weren't mature enough to handle it over there)
3) I have a warning in GIANT RED LETTERS not to complain about OC stability issues on my kernel thread.
Click to expand...
Click to collapse
This is all true... but the OP was simply asking a question now lets all play nice.
We should have an OC that allows n00bs to melt their cpu.... 2.5ghz ftw
No no no.... We have too many "I tried to load the ICS in the I9100 forums, and I bricked my phone, please help!" threads. we don't need "I OC'ed my phone to 8ghz and melted my cpu" threads too
Tegrak allows you to go past 1.6. I thought these CPU were locked @ 1.6 but i had to up my voltage at 1.7 and i got a small bump in my benches though i probably did run my test enough to confirm the bump. At so.e point, when i get some time ill beat on my CPU some more
penguinlogik said:
At 1.6 ghz... your phone will be discharging your battery ON your charger... I personally wouldn't recommend doing it as it gets the phone really hot, and causes the chip lots of stress due to high heat. Personally if you need more performance (this phones pretty damn fast anyways) go to 1.4ghz.
Click to expand...
Click to collapse
I ran my phone at 1.6 for days just to see performance. No UV at all.. battery certainly drained faster, but not while charging. It charged just fine.. and stayed cool even when stressing. Like many have stated, all CPU's are slightly different .. just cause yours melts at 1.6 and wont charge doesn't mean this will happen for anyone trying to run 1.6GHz.
sent from my SGSII... suckas
Try bumpin' up the voltage 1-2 notches.
Just to add to the stats...
I've been able to run @ 1.4 with the same voltage as 1.2, but my phone will freeze once in a while when running apps like camera or navigation. Had to bump the voltage up slightly to get it stable, though I will likely just run 1.2.
I cannot run at 1.6.
fallingreason said:
Just to add to the stats...
I've been able to run @ 1.4 with the same voltage as 1.2, but my phone will freeze once in a while when running apps like camera or navigation. Had to bump the voltage up slightly to get it stable, though I will likely just run 1.2.
I cannot run at 1.6.
Click to expand...
Click to collapse
Try changing or updating your kernel. Im the OP and had the same problems. with the new siyah kernel at 1.6 even if i try i cant make it lock up or freeze.
Your processor was made from a different silicon wafer than other people's phones and was rated for 1.2ghz.
Since each wafer is different, some processors take voltage better than others as well as speed. It happens.
Sent from my GT-I9100 using xda premium
Hey guys,
I have just installed OmegaRom by Team Cooper and what a Rom it is!!! Amazing is an understatement.
Okay so with there new Rom v2, it has an OC kernal built in and it does work...BUT I need to know how to OC the thing safely and squeezing as much performance as possible!
I have it at 825 and min 806 mhz, scaler is performance.
What settings would you pro's recommened?
Thanks!
Edit 1- I am using SetCPU to OC.
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
an0nym0us_ said:
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
Click to expand...
Click to collapse
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
davalav said:
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
Click to expand...
Click to collapse
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
CPU Tuner
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
sreesh87 said:
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
Click to expand...
Click to collapse
I have OCed it to 902 mhz..
Sent from my GT-S5830 using XDA App
Thanks for the comments guys... Gives me a rough estimate on its limits.
So far I have been running 844mhz performance for a while, since I created this thread and the battery has remained at 82%!
I have benched using AnTuTu twice and have excellent read and write speeds, compared to other benchies I have seen, OmegaRom is the best Rom I have ever used!
Cheers,
i tried cpufrills and its the best for me
I don't Think U mustuse over clocking,even my setting was min245 max 902,the effect just draining more battery,and if using to much can damaging ur prosessor
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Rushyang said:
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Click to expand...
Click to collapse
Don't worry! Like I said, I have experience O/C'ing processors etc and I know how bad the effects can be! I am not going for a massive overclock at all. Just a tiny bump in the speed. At the moment, I am running 825mhz and already the speed has improved dramatically. I may go a little further but 902mhz is a bit mental for my liking.
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
SetCPU is free for XDA members and it's the best one ever...period
http://forum.xda-developers.com/showthread.php?t=505419
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
setCPU is free to if you download it from the forum
Hi, I own this phone and I do overclock the processor, if you can help me , tell me step by step how.
Thank you and excuse my English .
kppus said:
Hi, I own this phone and I do overclock the processor, if you can help me , tell me step by step how.
Thank you and excuse my English .
Click to expand...
Click to collapse
Your english is fine.
To overclock the CPU, you need a custom kernel that supports CPU overclocking. If you're using a stock rom, use a stock kernel, otherwise use an AOSP kernel.
I don't recommend overclocking this phone in particular. It has heat damage issues (can damage digitalizer at specific temperatures).
Overclocking in general is a good idea, but bad for phones. Remember that the temperature rises very quickly with slight voltage additions. Therefore, the CPU will be throttled instantly to a lower frequency (ie: 1497MHz) anyway to prevent damage. It also drains the battery that much quicker.
Quad core (armv8?) @ what? 2.5Ghz if I'm not mistaken. Dude that should already be plenty fast. Honestly most people overclock older devices to give them that last shining chance to go down. Your G2 isn't dated by any means and is still up with the crowd as far as hardware goes.
G2's cpu is still good enough for most tasks without compromising any performance issues.