Hi guys
Can someone help me as i made a mistake.
Rooted and xrecovery on my x10 mini,but didnt bother to update the firmware to the Latest 2.1.1.A.0.6,so im stuck on the 2.1-UPDATE 1 which means i cant run CM7 OR CM6 on old firmware....
im a newbie to android switching from the iphones and thought to just give this a whirl today and open it up after just buying it.
But now i have tried to update in pc companion but it gets stuck at the plug in usb and hold back button stage and wont upgrade!
can anyone help me please as i would like to get it onto the CM7 and it wont run on the old firmware
thanks guys
Related
I update my X10 failed with the update services now cant swtich on anymore...please someone help me...my X10's singapore version...
Check if you're branded or not and check what software version do you have
how to branded?i used the rootexplorer and changed the "ro.semc.version.cust" and "ro.product.name" to 1234-8465 under "system/default.prop"...after that i used the update services software to update 2.1 but failed...it said the installation failed...please disconnect the phone and make sure the battery fully charged...oh my god...now i switched my phone on it only show a exclamation mark there...zzz...please help me...
Uh-oh i'm sure someone will be able to provide you some usefull info soon...Sorry can't help you further
anyway,thx...anyone else can help me to solve it???
Try remove your battrey, place it back and see whether it work ?
i tried many times...still useless...Singapore version update 2.1 really hard...does anyone in XDA test the Singapore version update successful to 2.1??
I also have a Singapore version and changed the number using rootexplore to Nordic version. I'm downloading the firmware now, will see if it installs without any problems. I will let you know soon...beginning to get little worry
OK,please inform me immerdiately...i need the way to save my X10...
Remove your battery and wait 30 seconds, than put the battery back in the phone and connect it in to your pc while you're holding the back key (before you connect the phone to your pc, run the SEUS)
Sent from my X10i using XDA App
Ok, I was able to install without any issues. I'm running 2.1.
I think I saw a way to unbrick the phone using a debranding method. You might try searching. Good luck.
2.1 update No mobile Network
Can anyone help me out here everything else works great except i have no 3g. Im on rogers in Canada. did i miss a step?
This may be a stupid question but once again getting stuck trying to go to V1.2. My question is when I go into fastboot mode and hook it up to my computer should PC Suite be recognizing my device also to make this work. Only reason I ask is ever since I went to DJ_Steves rom my PC Suite does not sync with my Streak and I do have what I believe is the latest version .48. If this isn't necessary to do the upgrade please let me know. Thanks for any help
lpcity34 said:
This may be a stupid question but once again getting stuck trying to go to V1.2. My question is when I go into fastboot mode and hook it up to my computer should PC Suite be recognizing my device also to make this work. Only reason I ask is ever since I went to DJ_Steves rom my PC Suite does not sync with my Streak and I do have what I believe is the latest version .48. If this isn't necessary to do the upgrade please let me know. Thanks for any help
Click to expand...
Click to collapse
Go back to V1.1.1 there is a bug in v1.2 he currently trying to figure out.
I upgraded and its not really worth doing for now. I bottled out of upgrading the baseband ( I knew the leds would flash) in case I wanted to drop easily back to v1.1.1. For the 1st time I'm thinking of going back.
Can you keep problems regarding Steve's ROM to Steve's thread please
(RESOLVED)hey guys, i've been looking everywhere for about 3 days now and really don't know how to resolve my phone's problem. I bought the rogers e10a version of the x10 mini and really wanted to update my phone to the latest 2.1 version. As most of us know, you have to debrand your phone first as SEUS as well as sony companion will tell you that 1.6 is the lastest version. Anyways i ended up using the "build.prop.claro" file from skzBR from this thread (http://forum.xda-developers.com/showthread.php?t=820009&page=4) while debranding and re-used SEUS to upgrade the phone to 2.1. Now when i used this build, i got the a claro logo when i booted up the phone and i didn't ike that, so i though i could just change the the build.prop in 2.1 to the other "build.prop.vivo"... well when i did that i felt really stupid after since i then remembered it was made for the 1.6 os. So now my phone is messed up! all i get is the Sony Ericsson start screen looping over and over again.
The phone does go into recovery mode, but does not have root permission through ADB so i can't push the old build.prop.claro file back into the phones system folder.. The SEUS and pc companion programs do not work to restore the phone and give me tell me my phone has no new software to update with. Even when i try pressing the repair option through pc companion get that same message. I've tried numerous flashtools with different rom with .sin files and have has zero success. So i'm wondering if i do have a chance at this if someone has the .sin files from both rom descirbe in the link and i try reflashnig it with the latest flashtool or if omnius is my only choice here.. any help really appreciated guys.
Thanks.
shouldve bought an evo
Sent from my PC36100 using XDA App
re:evo
not helpful, but thx.
Have u tried this:
Code:
http://forum.xda-developers.com/showthread.php?t=844219
RE: have you tried this
yes i have, the flashtool establishes a connection with the phone when i put it in recovery mode. When it says its flashing my phone, all ,sin files or a 2.1 generic rom seam to flash fine and whn done, it tells me " finished, now reboot phone", the phone is still stuck and looping. So i don't know if its because i'm not flashing the .sin files of the build.prop.vivo rom which i can't seam to find anywhere or what....
Hi, im a bit busy today. So just give you a link that you can try http://www.xperiax10.net/2010/04/14/debrand-your-xperia-x10-tutorial/
Hope it will help you.
i fixed it
I flashed the phone with 1.6 e10i firmware and the java flashtool and it worked. I then changed the build.prop file to a e10a file and reflashed. SEUS was able to reflasht the phone's firmware to 1.6 e10a and all is good now... thanks guys!
first off i must say thumbs up to everyone here for the help!! i have been on this site since ive started work at 10:30am and im stuck!! so i think now is the time to ask for help some guidence been at it for 6 hours!!
i want to root my x10i and show that the iphone isnt the only best phone when it comes to mods!!
i have a few questions ill keep it simple and short. i for some reason can not root my x10i! i have super on click 1.5.4 and 1.6.5 it will not detect in usb debuggin mode. ive tried the switch it on off on off.. still nothing.
i also have universalroot.apk that do not why it wont work!!
i also tried with flash tool 2.6 and even though i have flashed the phone i cant get it to root comes up ERROR Please connect your device and enable USB debugging.
so im not sure i dont think the drivers are right when in debug mode and i cant figure out how to fix it.
i originally started my quest to downgrade from 2.1 to 1.6 and cant find the 1.6 firmware.
my phone is running 2.1 build number 2.0.A.0.504
for clarification whats the difference between 2.0.2.A.0.24, 2.1.A.0.435 and 2.0.A.0.504 could i just flash my phone with 2.1.A.0.435?
so please any info help will be much appreciated.
thanks
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers