Related
Has anyone else had this problem? I plug my Photon into a USB power adapter plugged into my car's cigarette lighter and the phone displays the message that the device is charging but the percent of charge continues to decline. I have changed USB adapters and USB cables but it still happens. If I use an AC adapter and the same USB cable the phone charges correctly.
Is it a software or hardware problem? I was unlocked and rooted using several of the current custom ROMs and the charging process in the car worked then. When I re-locked and went back to stock and re-rooted then this happened.
i am having the same issue as of yesterday. Did you ever find out what the issue was?
im guessing that the car was off and that it was a foreign car...
Numerous issue could actually cause the same symptoms, Apps/games in the background... failing alternator, failing cigarette lighter, failing car adapter...
car not running while its charging could also cause this issue depending on charge level of the battery and the volts of the battery...
What you'll need to do is eliminate the possibilities..
Try with the car on and the phone on...
try with the car on and the phone off...
try with a different adapter for the car...
try with a different usb cord...
try with a magnum 44 aimed at it...
Try with a different Car is also another good option.
Ditto.
I am having the same problem.....worked fine before I unlocked/rooted. Anyone else have a suggestion?
I have the same issue with the incar charger and using a computers usb port to charge my phone..(doesnt charge when under load ..ie-dowloading something)...i think that it is the charger being underpowered..example..
Stock a/c charger puts out 850mA
Most computer usb and standard car usb chargers only put out around 500mA
Sent from my MB855 using xda premium
Mine charges very slowly in the car. The other day, I plugged in at 32%. Drove 30 minutes to get home, and it had only reached 37%. Plugged in at home, and within 10 minutes had well over 50%, even though I was actively using it then.
This is on stock rooted, btw.
The stock drivers must use a very conservative power draw when plugged into a relatively low-output power source. By contrast, the power draw from a high-output AC adapter must be quite aggressive, because it charges more quickly than other phones I've used when plugged into AC.
It did turn out to be caused by the car charger being underpowered. I went to BestBuy and bought a "high capacity" charger and all is good!
ChadH42 said:
It did turn out to be caused by the car charger being underpowered. I went to BestBuy and bought a "high capacity" charger and all is good!
Click to expand...
Click to collapse
Which specific car charger did you get? I'm having the same problem too!
The Photon needs at least 850mA charger to get charge currently. Otherwise it charge slowly or not charge at all.
Can anyone post a link to a specific charger that is working great for you and charging fast while in the car?
has any one who got charger working ? can anyone pls post the link to product
thanks in advance
vabs99 said:
has any one who got charger working ? can anyone pls post the link to product
thanks in advance
Click to expand...
Click to collapse
This one worked for me!
http://www.amazon.com/Motorola-Vehi...93004842&sr=8-2&keywords=motorola+car+charger
Has anyone noticed that phone does not charge while using GPS. The charging indicator is on but when I look at the stats it says discharging at -450 mAh. Is this the way it is and if so, is there a fix? 1 hr 42 m with 73% display on battery use and 43% charge remaining, but was plugged in the entire time while driving under an hour home. I am using the same Motorola high performance charger that every other phone is charged fully even when using GPS.
are you absolutely sure the charger is giving the full 1A?
What sensor app are you using to see the battery discharging?
Mine charges normally with gps on.
Sent from my HTC
LTE 4G Rezound
I was curious so I tested this with "Battery Monitor" I have it plugged into my laptop currently which only gives +500mA. and not the +1A that you get from a wall/car/high power usb port.
the app is showing +257mA with GPS on and functioning normally.
So charging good here... Might be something with your motorola charger? It could have a sensor in it to detect 'trickle charging mode' that is improperly engaging when connected to the HTC causing the charger to put out a minimal 'sustain only' level of amperage.
good luck!
you need a charger putting out 1A ... most car chargers put out 500mA so find a good one off monoprice
Here's what I'm doing. I have a Belkin 2.1A(2100mAh) USB car charger dongle. The problem is, once i connect the USB cable to it the phone registers it as "Charging USB" and does notcharge anywhere near as fast(power-wise) as if the phone was registering it "Charging AC". I'm not keen on using a power inverter to get the full AC charge so instead i am going to go pick up a cheap micro USB cable, splice it open, then disconnect the data wires(green & white ones) & then tape it back up. By disconnecting the data wires, the phone will no longer think it's a USB connection and then charge via AC, getting the best charge possible.
that should work ^ if thats the problem
I've found that using the included USB cable with a Belkin dual port USB car charger allows the phone to charge as if it were plugged in to a wall. I'm guessing the included cable has a different layout than standard Micro USB cables.
Sent from my ADR6425LVW using xda premium
dawynkoop said:
I've found that using the included USB cable with a Belkin dual port USB car charger allows the phone to charge as if it were plugged in to a wall. I'm guessing the included cable has a different layout than standard Micro USB cables.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I'm guessing that I have the same belkin dual port (2.1amp and 1amp ports) and the best I've seen out of it is about 250mah charging. This is using the supplied usb/micro hdmi whatever cord for the phone.
I have seen discharge rates off the charger of 750mah which is the highest I've seen on any phone. I'm guessing if you are using the nav on your phone with the screen on, it will probably still be using battery while plugged in.
thatsricci said:
I was curious so I tested this with "Battery Monitor" I have it plugged into my laptop currently which only gives +500mA. and not the +1A that you get from a wall/car/high power usb port.
the app is showing +257mA with GPS on and functioning normally.
So charging good here... Might be something with your motorola charger? It could have a sensor in it to detect 'trickle charging mode' that is improperly engaging when connected to the HTC causing the charger to put out a minimal 'sustain only' level of amperage.
good luck!
Click to expand...
Click to collapse
Possible, but says AC charging in Battery Monitor widget. I will post a few pics.
Here are a few Pics. you can see a couple of things.
-Charger rated at 950 MA out. and no other phone I have owned lost a charge while driving including TBolt, Charge, Bionic.
-Shows as AC charging
- Spikes of good charging detected
Put on Normal power mode today on the way in. live wallpapers did not wrok, just flickered. 3G on vice 4G. Battery still went down, but above 90% on 40 minute drive in. Screen low but on. Bluetooth speaker.
Maybe it is the iBolt car mount. See review online. will try without dock this afternoon on my way home.
-----------------------------------------------------
User: marc frederick, Nov 25, 2011
Pros: Options for different backs
Cons: Does not charge the phone while it is in use
Try playing pandora when the phone is 100 charged. After 45 minutes on the car mount (and yes it is plugged into a charger and all indicatros show it is charging) and the charge level is 84. Using the same charger but plugged into the phone, playing Pandora for 45 min starting charge level 68. Ending charge level is 100.
Yeah, something is telling that charger to not give you full juice
Rezound
ok, drove home off the window mount and just on charger, all same except full brightness on screen.40 minute drive. came up 7% battery vice down from 100 to 43%. nedd a few trials to confirm, but looks like window mount is throttleing juice.
thatsricci said:
are you absolutely sure the charger is giving the full 1A?
What sensor app are you using to see the battery discharging?
Click to expand...
Click to collapse
i have seen spurts up to 913 with GPS off and screen just turned on. Using battery monitor widget. Not on window mount, just charger.
I can confirm. The car dock will not charge your phone atleast not with the screen on and nothing else running but battery monitor widget.
I bought one and tested it extensively yesterday. I used a Verizon 1a charger and a generic 1a charger. With the dock and both chargerz the phone DIScharged(as in LOST battery power) at between 100ma and 200ma. Without the dock using the same chargers and changing nothing on the phone the phone charged at between 50a and 300ma.
I did the test several times to eliminate any random things the phone may have been doing in the background.
After doing that controlled test I played with it some more and no matter what I did I could not get a positive charge with the dock attached even in airplane mode with the screen backlight at minimum. Without the dock using the same chargers i ran Pandora and a police scanner both outputting through the phone speaker, gps, wifi, mobile all on, and screen on auto and still had a very small positive charge.
Moral of the story DO NOT BUY THIS DOCK unless you dont mind it just being a piece of plastic that holds your phone in place.
I wonder if there's a quick mod to it to get it working right. Like the soldering of the USB chargers I've seen.
Rezound
I just went ahead and bought an extra battery so I wouldn't have to charge in the car. Only takes 20 seconds to pop in a new battery.
Can charge both batts while I sleep at night.
Sent from my Galaxy Tab 10.1
I was looking for a high current charger for my Android tablet and there was a review that talked about compatibility. Some of the high cap chargers appear to be designed for Apple products and the pin wiring is subtly different. So, on some non-Apple products, the charge is only recognized as a lower power, 500mah charger and the users reported that some devices would normally charge and others would not. Some of the dual port charges also split the power. The 2.1 amp port and the 1 amp port cannot be used at the same time, depending on what is plugged into them. This was also brand specific. I ordered the Amazon Basics 2.1 amp dual charger and will see how that works. I have noticed a difference in charge rates between my Motorola charger left over from the Blackberry and the Verizon OEM one. The VZW one is faster.
I do the same thing I have been doing since my Windows phone days.
I use the AC cord plugged into a 12v to AC adaptor(screen set to 100% bright and no timeout).
I drove 6 hours last week ruuning Google Maps/GPS & my battery was 100% charged when I got to my destination.
~John
Does anyone know if there is an official 2m USB cable available in the UK? I bought a generic one off eBay, but it charges the phone extremely slowly....
I use the 2m cable that came with my kindle 3 and it works as well as the original one
Sent from my LT26i using XDA
Are you charging the phone from a USB port? If so, it's the limitation of the port, not the cable. Try with a proper charger an it should charge at a more sensible pace.
Dealextreme dot com
Sent from my LT26i using XDA
Charging speed doesn't depend on the cable but on the charger it is used with.
anthon said:
I use the 2m cable that came with my kindle 3 and it works as well as the original one
Click to expand...
Click to collapse
I'm afraid it doesn't work as well for me. I got a Kindle 3 cable, and while it does charge the phone (using the charger which came with the phone), it does it very slowly. So slowly that if I try to use the phone even for basic tasks whilst charging with it the battery still keeps heading south.
If I use the stupidly short cable that came with the phone it charges nice and quick, but every other cable I have used so far either doesn't charge or does so very slowly.
Any ideas as to why this would be?
On a related note, this sounds good, but again the cable looks stupidly short:
http://www.sonymobile.com/gb/products/accessories/quick-charger-ep851/
What are you using to charge your phone? An EP-800 or something else? I have a cheap 1500ma charger that seems to take ages to charge my Xperia. The cause was that for a full speed charge, pins 2 and 3 must be bridged. I dismantled the charger and put a tiny blob of solder on the usb port pins. It now charges like a demon.
Same story with my car charger. Before the mod I could actually lose charge when using satnav and streaming music over bluetooth.
I have a battery widget that says whether I am on AC charging or USB charging. Its name eludes me.
Oh, and a safer alternative may be to sacrifice a USB cable and bridge the pins on that.
Better than all those though is the official Blackberry Playbook charger. 2A and a long cable. Charges the phone like nothing else.
Yep, am using an EP-800.
Fortunately the latest cable I ordered works a treat, so I can happily recommend this one:
http://www.amazon.co.uk/gp/product/B007OWH65Y/ref=oh_details_o00_s00_i00
Rabangus said:
I'm afraid it doesn't work as well for me. I got a Kindle 3 cable, and while it does charge the phone (using the charger which came with the phone), it does it very slowly. So slowly that if I try to use the phone even for basic tasks whilst charging with it the battery still keeps heading south.
If I use the stupidly short cable that came with the phone it charges nice and quick, but every other cable I have used so far either doesn't charge or does so very slowly.
Any ideas as to why this would be?
On a related note, this sounds good, but again the cable looks stupidly short:
http://www.sonymobile.com/gb/products/accessories/quick-charger-ep851/
Click to expand...
Click to collapse
Double the length, double the resistance of the wire. Assuming the have the same cross-sectional area.
Hello,
I have purchased the HTC Bluetooth Music Adapter from Sprint (also known as the HTC Car StereoClip): http://shop.htcpedia.com/htc-car-stereoclip-audio-bridge-a100.html
I've been using it for about a week now, and the battery has completely depleted for the first time. I noticed that I am not able to charge it using a vehicle power charger . I used the included USB cable, and it charges just fine with several different wall chargers I have lying around. It charges fine from a PC or laptop USB port. But when I try to charge it from the vehicle power adapter, nothing happns.
I have an official HTC dual car charger: http://www.amazon.com/gp/product/B003OQUJRQ/ref=oh_details_o00_s00_i00. This charger is rated (like the standard HTC wall chargers) to put out a current of 1A per each outlet. So I don't understand why this Music Adapter will charge via a wall charger, but not a vehicle, and they have the same output, and are made by the same company. I double checked that the vehicle charger works with other devices. It will charge my HTC EVO 4G LTE, my Jawbone ICON bluetooth headset, as well as other friends' phones.
Does anyone else have problems getting their HTC Bluetooth StereoClip to charge? I know it's not the end of the world--I can always take it inside the house to charge it when it dies every few days, but it sure would be convenient to just have it charge in the car overnight without having to remember to tote it back and forth.
Please help!!
Thanks.
Um, I looked at the pictures of this device. When you are in your car, are you plugging your charger into the phones charging port? Not the port on the Bluetooth adapter. Your phone will never charge if you are plugged into the Bluetooth adapters port.
Are you trying to use it while it is being charged? I think i read before that the stereoclip uses the BT to stream the sound, and i've had a few bluetooth headsets that didn't work if it was being charged, and won't charge if you're actively using it (just tried out of curiosity). Only thing i can recommend is to try a single microusb cigarette charger, maybe its the way the charger is wired.
---------- Post added at 12:55 PM ---------- Previous post was at 12:39 PM ----------
One question that is unrelated to this charging issue: in the bluetooth pairing settings for the stereoclip, does it do phone mode as well as media or just media? My car's headunit does phone and i'd like to see if i can just have each device handle a separate stream.
Hmm. Interesting. Mine charges fine using a rocketfish/best buy car adapter I have and a generic micro usb cable I got from Monoprice. Charging occurs on mine when it's off or on, streaming or not. The adapter and cable also work to charge my phone and jawbone too.
Maybe try change your usb cable or car adapter?
Twosted said:
Um, I looked at the pictures of this device. When you are in your car, are you plugging your charger into the phones charging port? Not the port on the Bluetooth adapter. Your phone will never charge if you are plugged into the Bluetooth adapters port.
Click to expand...
Click to collapse
When in the car, my phone sits in the car dock...on the windshield, so yes it is plugged into one of the ports. And I plug another USB cable (from the 2nd port) into the BT Music Adapter. It won't charge. I have to take it inside and charge it from a wall charger.
gmtom1 said:
Hmm. Interesting. Mine charges fine using a rocketfish/best buy car adapter I have and a generic micro usb cable I got from Monoprice. Charging occurs on mine when it's off or on, streaming or not. The adapter and cable also work to charge my phone and jawbone too.
Maybe try change your usb cable or car adapter?
Click to expand...
Click to collapse
Okay...I had a spare Rocketfish vehicle charger lying around, and I just went out to the car and tried it. It charges just fine fine!! However, an official HTC vehicle charger with an official HTC USB cable won't charge an official HTC accessory...WEIRD.
So problem "temporarily" solved: I have to have to keep TWO vehicle chargers in the car--the dual HTC for the car dock, and the rocketfish for the HTC bluetooth adapter. This really sucks, and defeats the purpose of me buying a dual adapter. Or, I could just bring the adapter in every 4 or 5 days and charge it inside. It gets about 5 hours of music streaming before it dies. Oh well...
The issue I have with mine is that if I plug it into my Bose soundlink aux port and connect to it, it actually sounds better then just connecting to the soundlink itself. Using the new Apt-x and all.
But I plug it into my car aux in and it doesn't sound any better then my universal one I'd been using on a2dp
Sent from my EVO using xda premium
helpwithmy8525 said:
Okay...I had a spare Rocketfish vehicle charger lying around, and I just went out to the car and tried it. It charges just fine fine!! However, an official HTC vehicle charger with an official HTC USB cable won't charge an official HTC accessory...WEIRD.
So problem "temporarily" solved: I have to have to keep TWO vehicle chargers in the car--the dual HTC for the car dock, and the rocketfish for the HTC bluetooth adapter. This really sucks, and defeats the purpose of me buying a dual adapter. Or, I could just bring the adapter in every 4 or 5 days and charge it inside. It gets about 5 hours of music streaming before it dies. Oh well...
Click to expand...
Click to collapse
The dual charger could be splitting the Amps, I've heard of 2A adapters pushing 2 to one port or 1 and 1 if 2 things are plugged in. Did you try charging the BT adapter without the phone plugged into the second port? The BT adapter probably requires a specific minimum amperage where as the phone will just go into USB charging instead of wall charging mode if under 1A.
I tried every possible combination. And I have verified that it puts out simulataneously 2A (1A + 1A). I connected my EVO 4G LTE, plus a friends original EVO 4G, and they both showed "AC Charghing," which means 1A. And of course, I tried charging the StereoClip with nothing else. I don't get it.
helpwithmy8525 said:
I tried every possible combination. And I have verified that it puts out simulataneously 2A (1A + 1A). I connected my EVO 4G LTE, plus a friends original EVO 4G, and they both showed "AC Charghing," which means 1A. And of course, I tried charging the StereoClip with nothing else. I don't get it.
Click to expand...
Click to collapse
Weird is right. I have a dual output car charger in my other car & it works fine with that one too, with 2 devices plugged in. My dual is a generic one I got from Monoprice.
My only other suggestion would be to find a different dual head charger.
Will this autopair with newer Samsung Galaxy phones? Or just with HTC ones?
Tenacious--M said:
Will this autopair with newer Samsung Galaxy phones? Or just with HTC ones?
Click to expand...
Click to collapse
It will pair with anything. I use it with my Nexus 7 mainly.
And just as a precaution.. Don't leave this in your car if it is hot where you live.
I had mine in my car, for probably a month. Never used it other then when i first got it to verify it worked. Went to use it again, nada..
Wouldnt charge, wouldnt turn on, nothin. I'm assuming the 100+ degree heat for a month+ destroyed the battery. Sprint provides a 1 year warranty on their accessories, so i was able to swap it out no issue though.
Tenacious--M said:
Will this autopair with newer Samsung Galaxy phones? Or just with HTC ones?
Click to expand...
Click to collapse
Yes, it will pair with anything. My first HTC EVO 4G LTE (stupid) decided to break, so I was stuck with a Samsung Intercept as a loaner phone for awhile. It will pair with any bluetooth device, however...if that device doesn't support the new apt-X coding technology (like the EVO 4G LTE), the audio may not be as clear, and the connection will likely have intermittent skips (as with the Samsung Intercept).
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Slow Charge Message
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Same here. Glad to hear it is not just me. I just got off with NA HTC Tech Support. There official stance is that they do not recommend or support using any device other than the official charging cable and plug in device. They went as far to say that they do not support charging in the car. I just about flipped my lid on the phone.
Here is the link to their site: http://www.htc.com/us/support/howto...783&p_name=droid-dna-by-htc-(verizon-wireless)
"Only the power adapter and USB cable provided in the box must be used to charge the battery"
I was told by Verizon that this was just a scare tactic, while HTC says I am not getting the right charge and they have no answer since they do not support DC charging in the car. Any info people have is appreciated. It works fine with Hard Wired DC -MicroUSB, but not with any USB Plug in.
Any apps that would help me measure the amount of charge it is getting?
Thanks in advance.
What are the specs on your car charger?
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
So odd that they would do that, especially with the power draw of the phone. However you can charge using the battery packs?
My car adapter is a Macally USB car adapter model carusb10 output 5v/2.1 amp x1 500mA x2.
As for my house adapters the RCA 2 port USB wall adapter. 2.1 Amp x 1 or 1000mA x 2 I believe.
Sent from my HTC6435LVW using Tapatalk 2
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
xcesivemastub8ah said:
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
Click to expand...
Click to collapse
I have tried several different USB adaptors, from Razorfish(BestBuy), Belkin single USB input 2.1amp, innocell (RadioShack) dual SUB 3.1amp. Same problem on all.
On the other hand, any direct Wall connection with USB cable attached seems to work fine.
Also, I have the Motorola p4000 battery backup and when I plug that in, it also works fine and views it as AC.
Swapping the pins didn't work for me, same issue. Its a pita for me especially charging in the car because when using phone for navigation it charges so slow that it can't actually charge my phone and my battery decreases. I've went the route in the car I use my nexus 7 charger connected to an inverter.
Sent from my HTC6435LVW using Tapatalk 2
From my phone conversation with Seth from HTC Support, the slow charging warning is due to the update because the update incorporates the faster charging feature that qualcomm & htc have referenced too recently (can't remember what its actually called). The phone has a new type of charging setup that makes it charge faster than some other phones.
Unfortunately some chargers (wall/car) dont supply enough voltage to activate the charging feature so while the phone does charge fine (it charges at standard phone charge rate) it cannot charge at the faster rate due to the charger.
He states that this will not harm the phone and ther phone will charge fine and it a normal time. You can disregard the warning. For those that like the faster charge rate, you have to use the right charger/cable.
Before the update our phones were mostly charging at the slower rate and that's why most didn't see a warning unless the cable being used was below the standard rate of charge.
Hope this helps
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Why are there so many problems about this thing lately even me, I experience this most of the time
When I use the Best Buy 2.1 amp wall charger I still get the message.
I'll need to find my oem wall charger.
So far every one I have gives this message.
I haven't seen this message at all on any of my charges but I haven't charged in the car yet. My battery usually lasts for more than the while day so I just charge at night.
Sent from my HTC6435LVW using xda app-developers app
Well with the faster charging enabled it does charge pretty quick especially using my nexus 7 wall adapter, even with my Nokia Qi pad. But man that last percent takes a while.
As of now I'm using supercharged hatka ROM slim 3.0.3 and getting good battery life. Even in the middle of nowhere where 75% percent of the time when I'm in the plant its searching for signal. I'll leave work after 8 hours and still be at 60%
Guess you can say its the only negative I have for the phone. Trust me the battery life is much better in the plant then my old bionic. I use to have to change the standard battery after 4 or 5 hours as it was completely dead.
Sent from my HTC6435LVW using Tapatalk 2
Last night I received my daughters replacement Rezound from the warranty company. It came with a 1 amp wall charger.
I plugged it into my DNA and did not get the notice of slower charging and it charged quicker than I've ever seen it.
Too bad my 2.1 best buy one won't.
The quick charge capable chargers must output just slightly higher voltage to trigger the rapid charge mode.
I'll experiment some day and see.
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I have the charger that came with the phone it it fully charges my DNA in 2 hours from 3%
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I kinda figured it was something with the pins if I wasn't voltage offset.
I did find that one of my car chargers from best buy runs in quick charge. The cable I fixed, rather than using a usb cable in a slot on the charger.
The best number 2.1 amp wall charger uses a data type cable.
Maybe I'll check into shorting the pins on that sucker to get quick charge mode.
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
The phone is doing more than checking pins now. I have a 2.1 Amp dual charger with pins shorted and get the warning. It happily charged in AC mode before the update. The charger can also charge a nexus 10 at 2 Amps. I'm guessing the kernel devs will have to locate the source of the warning. I thought the resistance between the data pins might be the trigger, but there is no difference between the HTC charger and my dual charger. It does seem my car charger is unaffected.
I have found that to trick the phone into AC mode you have to short the the actual cable. Hence strip the insulation off the wires and short the data wires together. Has worked for me on all my chargers.
Sent from my HTC6435LVW using Tapatalk 2
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Clay333 said:
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Click to expand...
Click to collapse
It could be the charging equipment your phone or it could also be the power source not providing enough power to the device for it to charge fast so it charges slow.
Sent from my HTC6435LVW using XDA Premium 4 mobile app