Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Slow Charge Message
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Same here. Glad to hear it is not just me. I just got off with NA HTC Tech Support. There official stance is that they do not recommend or support using any device other than the official charging cable and plug in device. They went as far to say that they do not support charging in the car. I just about flipped my lid on the phone.
Here is the link to their site: http://www.htc.com/us/support/howto...783&p_name=droid-dna-by-htc-(verizon-wireless)
"Only the power adapter and USB cable provided in the box must be used to charge the battery"
I was told by Verizon that this was just a scare tactic, while HTC says I am not getting the right charge and they have no answer since they do not support DC charging in the car. Any info people have is appreciated. It works fine with Hard Wired DC -MicroUSB, but not with any USB Plug in.
Any apps that would help me measure the amount of charge it is getting?
Thanks in advance.
What are the specs on your car charger?
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
So odd that they would do that, especially with the power draw of the phone. However you can charge using the battery packs?
My car adapter is a Macally USB car adapter model carusb10 output 5v/2.1 amp x1 500mA x2.
As for my house adapters the RCA 2 port USB wall adapter. 2.1 Amp x 1 or 1000mA x 2 I believe.
Sent from my HTC6435LVW using Tapatalk 2
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
xcesivemastub8ah said:
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
Click to expand...
Click to collapse
I have tried several different USB adaptors, from Razorfish(BestBuy), Belkin single USB input 2.1amp, innocell (RadioShack) dual SUB 3.1amp. Same problem on all.
On the other hand, any direct Wall connection with USB cable attached seems to work fine.
Also, I have the Motorola p4000 battery backup and when I plug that in, it also works fine and views it as AC.
Swapping the pins didn't work for me, same issue. Its a pita for me especially charging in the car because when using phone for navigation it charges so slow that it can't actually charge my phone and my battery decreases. I've went the route in the car I use my nexus 7 charger connected to an inverter.
Sent from my HTC6435LVW using Tapatalk 2
From my phone conversation with Seth from HTC Support, the slow charging warning is due to the update because the update incorporates the faster charging feature that qualcomm & htc have referenced too recently (can't remember what its actually called). The phone has a new type of charging setup that makes it charge faster than some other phones.
Unfortunately some chargers (wall/car) dont supply enough voltage to activate the charging feature so while the phone does charge fine (it charges at standard phone charge rate) it cannot charge at the faster rate due to the charger.
He states that this will not harm the phone and ther phone will charge fine and it a normal time. You can disregard the warning. For those that like the faster charge rate, you have to use the right charger/cable.
Before the update our phones were mostly charging at the slower rate and that's why most didn't see a warning unless the cable being used was below the standard rate of charge.
Hope this helps
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Why are there so many problems about this thing lately even me, I experience this most of the time
When I use the Best Buy 2.1 amp wall charger I still get the message.
I'll need to find my oem wall charger.
So far every one I have gives this message.
I haven't seen this message at all on any of my charges but I haven't charged in the car yet. My battery usually lasts for more than the while day so I just charge at night.
Sent from my HTC6435LVW using xda app-developers app
Well with the faster charging enabled it does charge pretty quick especially using my nexus 7 wall adapter, even with my Nokia Qi pad. But man that last percent takes a while.
As of now I'm using supercharged hatka ROM slim 3.0.3 and getting good battery life. Even in the middle of nowhere where 75% percent of the time when I'm in the plant its searching for signal. I'll leave work after 8 hours and still be at 60%
Guess you can say its the only negative I have for the phone. Trust me the battery life is much better in the plant then my old bionic. I use to have to change the standard battery after 4 or 5 hours as it was completely dead.
Sent from my HTC6435LVW using Tapatalk 2
Last night I received my daughters replacement Rezound from the warranty company. It came with a 1 amp wall charger.
I plugged it into my DNA and did not get the notice of slower charging and it charged quicker than I've ever seen it.
Too bad my 2.1 best buy one won't.
The quick charge capable chargers must output just slightly higher voltage to trigger the rapid charge mode.
I'll experiment some day and see.
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I have the charger that came with the phone it it fully charges my DNA in 2 hours from 3%
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I kinda figured it was something with the pins if I wasn't voltage offset.
I did find that one of my car chargers from best buy runs in quick charge. The cable I fixed, rather than using a usb cable in a slot on the charger.
The best number 2.1 amp wall charger uses a data type cable.
Maybe I'll check into shorting the pins on that sucker to get quick charge mode.
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
The phone is doing more than checking pins now. I have a 2.1 Amp dual charger with pins shorted and get the warning. It happily charged in AC mode before the update. The charger can also charge a nexus 10 at 2 Amps. I'm guessing the kernel devs will have to locate the source of the warning. I thought the resistance between the data pins might be the trigger, but there is no difference between the HTC charger and my dual charger. It does seem my car charger is unaffected.
I have found that to trick the phone into AC mode you have to short the the actual cable. Hence strip the insulation off the wires and short the data wires together. Has worked for me on all my chargers.
Sent from my HTC6435LVW using Tapatalk 2
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Clay333 said:
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Click to expand...
Click to collapse
It could be the charging equipment your phone or it could also be the power source not providing enough power to the device for it to charge fast so it charges slow.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Related
Has anyone noticed that phone does not charge while using GPS. The charging indicator is on but when I look at the stats it says discharging at -450 mAh. Is this the way it is and if so, is there a fix? 1 hr 42 m with 73% display on battery use and 43% charge remaining, but was plugged in the entire time while driving under an hour home. I am using the same Motorola high performance charger that every other phone is charged fully even when using GPS.
are you absolutely sure the charger is giving the full 1A?
What sensor app are you using to see the battery discharging?
Mine charges normally with gps on.
Sent from my HTC
LTE 4G Rezound
I was curious so I tested this with "Battery Monitor" I have it plugged into my laptop currently which only gives +500mA. and not the +1A that you get from a wall/car/high power usb port.
the app is showing +257mA with GPS on and functioning normally.
So charging good here... Might be something with your motorola charger? It could have a sensor in it to detect 'trickle charging mode' that is improperly engaging when connected to the HTC causing the charger to put out a minimal 'sustain only' level of amperage.
good luck!
you need a charger putting out 1A ... most car chargers put out 500mA so find a good one off monoprice
Here's what I'm doing. I have a Belkin 2.1A(2100mAh) USB car charger dongle. The problem is, once i connect the USB cable to it the phone registers it as "Charging USB" and does notcharge anywhere near as fast(power-wise) as if the phone was registering it "Charging AC". I'm not keen on using a power inverter to get the full AC charge so instead i am going to go pick up a cheap micro USB cable, splice it open, then disconnect the data wires(green & white ones) & then tape it back up. By disconnecting the data wires, the phone will no longer think it's a USB connection and then charge via AC, getting the best charge possible.
that should work ^ if thats the problem
I've found that using the included USB cable with a Belkin dual port USB car charger allows the phone to charge as if it were plugged in to a wall. I'm guessing the included cable has a different layout than standard Micro USB cables.
Sent from my ADR6425LVW using xda premium
dawynkoop said:
I've found that using the included USB cable with a Belkin dual port USB car charger allows the phone to charge as if it were plugged in to a wall. I'm guessing the included cable has a different layout than standard Micro USB cables.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I'm guessing that I have the same belkin dual port (2.1amp and 1amp ports) and the best I've seen out of it is about 250mah charging. This is using the supplied usb/micro hdmi whatever cord for the phone.
I have seen discharge rates off the charger of 750mah which is the highest I've seen on any phone. I'm guessing if you are using the nav on your phone with the screen on, it will probably still be using battery while plugged in.
thatsricci said:
I was curious so I tested this with "Battery Monitor" I have it plugged into my laptop currently which only gives +500mA. and not the +1A that you get from a wall/car/high power usb port.
the app is showing +257mA with GPS on and functioning normally.
So charging good here... Might be something with your motorola charger? It could have a sensor in it to detect 'trickle charging mode' that is improperly engaging when connected to the HTC causing the charger to put out a minimal 'sustain only' level of amperage.
good luck!
Click to expand...
Click to collapse
Possible, but says AC charging in Battery Monitor widget. I will post a few pics.
Here are a few Pics. you can see a couple of things.
-Charger rated at 950 MA out. and no other phone I have owned lost a charge while driving including TBolt, Charge, Bionic.
-Shows as AC charging
- Spikes of good charging detected
Put on Normal power mode today on the way in. live wallpapers did not wrok, just flickered. 3G on vice 4G. Battery still went down, but above 90% on 40 minute drive in. Screen low but on. Bluetooth speaker.
Maybe it is the iBolt car mount. See review online. will try without dock this afternoon on my way home.
-----------------------------------------------------
User: marc frederick, Nov 25, 2011
Pros: Options for different backs
Cons: Does not charge the phone while it is in use
Try playing pandora when the phone is 100 charged. After 45 minutes on the car mount (and yes it is plugged into a charger and all indicatros show it is charging) and the charge level is 84. Using the same charger but plugged into the phone, playing Pandora for 45 min starting charge level 68. Ending charge level is 100.
Yeah, something is telling that charger to not give you full juice
Rezound
ok, drove home off the window mount and just on charger, all same except full brightness on screen.40 minute drive. came up 7% battery vice down from 100 to 43%. nedd a few trials to confirm, but looks like window mount is throttleing juice.
thatsricci said:
are you absolutely sure the charger is giving the full 1A?
What sensor app are you using to see the battery discharging?
Click to expand...
Click to collapse
i have seen spurts up to 913 with GPS off and screen just turned on. Using battery monitor widget. Not on window mount, just charger.
I can confirm. The car dock will not charge your phone atleast not with the screen on and nothing else running but battery monitor widget.
I bought one and tested it extensively yesterday. I used a Verizon 1a charger and a generic 1a charger. With the dock and both chargerz the phone DIScharged(as in LOST battery power) at between 100ma and 200ma. Without the dock using the same chargers and changing nothing on the phone the phone charged at between 50a and 300ma.
I did the test several times to eliminate any random things the phone may have been doing in the background.
After doing that controlled test I played with it some more and no matter what I did I could not get a positive charge with the dock attached even in airplane mode with the screen backlight at minimum. Without the dock using the same chargers i ran Pandora and a police scanner both outputting through the phone speaker, gps, wifi, mobile all on, and screen on auto and still had a very small positive charge.
Moral of the story DO NOT BUY THIS DOCK unless you dont mind it just being a piece of plastic that holds your phone in place.
I wonder if there's a quick mod to it to get it working right. Like the soldering of the USB chargers I've seen.
Rezound
I just went ahead and bought an extra battery so I wouldn't have to charge in the car. Only takes 20 seconds to pop in a new battery.
Can charge both batts while I sleep at night.
Sent from my Galaxy Tab 10.1
I was looking for a high current charger for my Android tablet and there was a review that talked about compatibility. Some of the high cap chargers appear to be designed for Apple products and the pin wiring is subtly different. So, on some non-Apple products, the charge is only recognized as a lower power, 500mah charger and the users reported that some devices would normally charge and others would not. Some of the dual port charges also split the power. The 2.1 amp port and the 1 amp port cannot be used at the same time, depending on what is plugged into them. This was also brand specific. I ordered the Amazon Basics 2.1 amp dual charger and will see how that works. I have noticed a difference in charge rates between my Motorola charger left over from the Blackberry and the Verizon OEM one. The VZW one is faster.
I do the same thing I have been doing since my Windows phone days.
I use the AC cord plugged into a 12v to AC adaptor(screen set to 100% bright and no timeout).
I drove 6 hours last week ruuning Google Maps/GPS & my battery was 100% charged when I got to my destination.
~John
This post is not meant to ask a question, but to answer some. Hopefully it will help someone. It might get lengthy, so if you're not into reading it all, scroll to the bottom for the cliff notes.
Like many others I've seen here and around the web, I was having trouble with my Note charging really slow. It only seemed to charge at a reasonable rate with the stock charger that shipped with it (~3 hours 0 to 100). I didn't expect much out of my PC USB ports because they are only 500mA max (as are most), but I have several 1A USB chargers that I used to use with my iphone without a noticeable problem. Being that they are 1A just as the samsung stock charger is, I was baffled as to why they would not charge at the same rate. I even tried my wife's ipad charger which is 2A and that did not make any difference, it was just as slow as my (non samsung) 1A chargers. It did not matter which cable I used, from the stock samsung one that shipped with the Note to a number of other ones I have.
I finally had had it and after searching all over and not finding any answers other than people's anecdotal stories about what works for them, and deciding that way too much of that was just placebo (ie people saying the ipad charger charged faster, and I know it does not). I cut one of my charger cables (USB type A male to micro USB male) open, and did a few experiments with my multimeter to determine the current levels for my various chargers under various scenarios.
I tested 4 different chargers. The black samsung charger that came with the phone, a white iphone one that is a cube like the samsung one, also 1A max, a stock 2A ipad charger, and an external 5000mAh USB charging battery pack that puts out 750mA max.
I had heard that the data+ and data- pins needed to be shorted on samsung phones in order to charge properly, so I tested the charging current with these pins shorted, with these pins connected straight through (as is a normal charging cable), and with these pins open (5V power and ground only).
Here are the results:
Black stock samsung charger (1A):
-Data lines connected straight through, which is essentially just a completely normal data/charge USB type A to USB micro cable = 960mA.
-Data lines not connected, open on both ends, only USB power 5V and ground connected = 440mA.
-*Modified cable* so that the data lines on the micro USB side (phone side) shorted = 960mA.
White iphone 1A charger:
-Data lines connected straight through (stock cable) = 440mA.
-Data lines open, not connected on either end = 440mA.
-*Modified cable* so that data lines on the micro USB side shorted = 900-910mA with phone screen on, 850mA with phone screen off. I assume that what might have been happening here is that the charge current was just going up when the phone was drawing more current because the screen was lit up. I don't think it was actually affecting charge speed, it was just maintaining the same charge but providing more power so that the screen could stay lit without affecting the charging rate. I don't know why it was doing this though because the stock samsung charger did not do this.
-iPad 2A charger:
-Data lines connected straight through (stock cable) = 440mA.
-Data lines open on both ends = 440mA.
-*Modified cable* so that data lines shorted on phone micro USB side = 860mA whent he screen was on, 780mA screen off. Note that I'm surprised this did not go up to the same as the samsung stock charger or even as high as the 1A iphone charger. I don't know why? It is a genuine apple iPad charger that claims 10W which is 2A at 5V. As far as why it might have different currents for screen off and on, read my comments above for the white iphone charger that did the same thing.
External 5000mAh battery USB charger (750mA max claimed output):
-Data lines connected straight through (stock cable) = 440mA.
-Data lines open on both ends = 440mA.
-*Modified cable* so that data lines shorted on phone micro USB side = 760mA phone screen on, 700mA phone screen off.
So that's all the data. As you can see, it is very important that the USB data+ and data- lines are shorted together in order to charge at a fast rate. The problem is that all normal usb data/charge cables, including the stock samsung cable that came with the Note, do not have these pins shorted, so it is up to the charger itself to short these pins if it is to put out its max current to charge the Note. Obviously the stock samsung charger has them shorted, because it charges at a fast rate with a normal cable. But none of my other chargers, including the iphone and ipad charger, have these pins shorted, so the only way these other chargers I have will charge at their max current capability is by using a modified cable (which I made) that shorts the data+ and data- pins. Using this modified cable allows me to use any charger, and charge at its max output. Note that if you also make a cable that has these pins shorted, don't mistake it for a normal cable and try to plug it in to a computer or anything that plans to use the data lines as this could potentially damage that device.
Unfortunately at this time I do not have any recommendations for cables to buy that have the data+ and data- pins shorted, but I can recommend buying one from amazon for $1.50 and doing it yourself if you're capable, but again, be careful not to use it for anything but charging from a "dumb" AC (or car) charger. I do not take responsibility for any damage you might do to your charger or other equipment!!!!
Also unfortunately, I do not have any recommendations for chargers which definitely have the data lines shorted in order to charge quickly. I have another charger or two that I can test, but don't have them with me now. I would imagine that all samsung chargers will have the appropriate pins shorted and will charge at their max capacity. I doubt the Note (without modifications) can charge any faster than ~960mA, though, so you're spinning your wheels using a 2A charger, and in the case of something like the iPad charger, at least the genuine apple one I have, with a normal cable, it actually does not charge even half as fast as the stock samsung charger, and even with a modified cable that shorts the data lines, it's still not as fast as the stock charger, although it's pretty close (probably wouldn't notice much difference in real usage unless you really measured your charge time). I'm hoping to order a few more chargers to test, in hopes of finding a cheap aftermarket one that we can use with our Notes that already has the pins shorted.
*Cliff notes* -- I physically measured the output current during charging of my SGH-I717 AT&T Note for a few different USB chargers I have, and discovered that all of them (that I personally have) except the stock samsung charger do not have the data+ and data- lines shorted, which means that you'll be charging at 440mA of current, regardless of the rating of your USB charger. This is less than half the current of the stock samsung charger, meaning it will take more than twice as long to charge your phone. In fact, if you're using you're phone during charging, there's a good chance that not only will it not charge, but it will actually drain the battery a little bit, because 440mA is barely enough to run the phone (depending on what you're doing). So while you think you're charging with the same charger because it's rated at 1A or even 2A, chances are you actually are only charging at 440mA, the same as from a USB computer port, and it is going to take a realllly long time to charge compared to your stock samsung charger. Bottom line, use the stock samsung charger until we can test a few different chargers and compile a list of ones that have the data lines shorted so that they can charge your Note at their full current capability.
Hopefully this is helpful to answer some of the questions about why the Note seems to be charging slow for some people and not for others. I imagine that there are some USB chargers out there that have the data lines shorted and others that do not. Until I can get my hands on a few more (I'm going to order a couple different ones from amazon) and test them, I don't have any recommendations for now other than to use your stock charger, and most likely any genuine samsung replacement charger rated at 1A or more (though it probably will not use more).
wow! Thanks for investigating this!
This wad good info bruh.....thanks for the time u took man.
Sent from my SAMSUNG-SGH-I717 using xda premium
Wow that is pure science....
As I'be been posting everywhere, fast chargers short the middle 2 pins. The phone sees this and determines it's a "wall charger". I always recommend the Motorola car charger as it's confirmed to have shorted data pins, or short them yourself with a dab of solder within the cable. Don't use it for data though. Won't hurt, but won't work!
Edit: fantastic work though, thanks for taking the time!
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for the tip on the motorola charger having the pins shorted. Is this the one you're talking about?
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938811&pf_rd_i=507846
Here's my dilemma. I used the stock Samsung cable with a 2.1A rated adapter from TomTom (rapid charge) as it was said it might be the pin configuration and lost more charge than using the same adapter with a universal Belkin mini USB cable with a micro adapter. My issue is that while using the GPS and streaming music, the phone loses charge while on the charger!
This is not acceptable.
Sent from my SAMSUNG-SGH-I717 using XDA App
Yes. Thats the one they elude to. Ebay has them for $7.59 with free shipping.
Sent from my SAMSUNG-SGH-I717 using XDA App
Thanks for all that - very helpful. I was planning to try the iPad charger (mentioned it in another thread) but time got away from me. This is great information to have.
dakleenupman said:
Here's my dilemma. I used the stock Samsung cable with a 2.1A rated adapter from TomTom (rapid charge) as it was said it might be the pin configuration and lost more charge than using the same adapter with a universal Belkin mini USB cable with a micro adapter. My issue is that while using the GPS and streaming music, the phone loses charge while on the charger!
This is not acceptable.
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
The stock cable does not have the data pins shorted, the actual AC wall adapter does.
Sent from my SAMSUNG Galaxy Note
Thanks pj_rage.
I'm pretty good electrically, but a bit less so with google. I searched, and likely didn't use the right string (happens pretty often with me). Got a diagram or a link to a diagram so I can see which two pins need shorting?
Makes more sense to me to go and modify all my car chargers rather than modify cables. I'll never use a car charger to transfer data to a computer, but might use a cable in a car in a pinch if I needed to.
So if I were to use the home adapter with stock cable hooked up to a power inverter While in my car, I should expect the 960mAh output then?
Sent from my SAMSUNG-SGH-I717 using XDA App
dakleenupman said:
So if I were to use the home adapter with stock cable hooked up to a power inverter While in my car, I should expect the 960mAh output then?
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
That should work, but kinda overkill. It's less cumbersome to either modify a dedicated cable or the car charger itself. Just short circuit the two middle pins.
Thanks for the research OP. Btw are you on AVS?
Sent from my SAMSUNG-SGH-I717 using XDA App
pj_rage said:
Thanks for the tip on the motorola charger having the pins shorted. Is this the one you're talking about?
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938811&pf_rd_i=507846
Click to expand...
Click to collapse
That's the one
Sent from my SAMSUNG-SGH-I717 using xda premium
Think the problem is people are not allowing their phones to drain before placing back on charger. My first out of box battery was about 40% didn't charge it till it was about 5-7% left. 2nd day I charged it to 100% which took about 3.5 hrs and than let it drain to about 20% before I put it back on the charger. 3rd day let it drop to 15% battery and placed on charger again. I've had my phone for almost 4 days and so far no problems, battery last 18-20 hrs on avg. Just my input I guess.
Sent from my SAMSUNG-SGH-I717 using xda premium
dakleenupman said:
So if I were to use the home adapter with stock cable hooked up to a power inverter While in my car, I should expect the 960mAh output then?
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
I've also seen issues with other phones when charging off a inverters with random reboots, some charge, some don't etc.
Envy Diz said:
Think the problem is people are not allowing their phones to drain before placing back on charger. My first out of box battery was about 40% didn't charge it till it was about 5-7% left. 2nd day I charged it to 100% which took about 3.5 hrs and than let it drain to about 20% before I put it back on the charger. 3rd day let it drop to 15% battery and placed on charger again. I've had my phone for almost 4 days and so far no problems, battery last 18-20 hrs on avg. Just my input I guess.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Lithium ion batteries don't work that way, and actually, they prefer short, fast charges. Android, on the other hand, seems to like a full cycle or two to calibrate its battery stats, but that might just be a myth.
Sent from my SAMSUNG-SGH-I717 using xda premium
slow charge
I too have been troubled with poor battery life and slow charge. Here is what I have experienced:
I charge mine overnight for 9 hours. Every day I take the phone off the charger and I notice it is at 98%. Then I struggle to get through the day.
One day I switched phones in the evening, so the Note was left on the charger for 12 hours. When I took it off next morning, it said 100%. Low and behold... I was left with about 20% more at the end of a typical use day. Does this meen that the 2% extra charge makes that much difference?
I too have tried all of the different high amp chargers with all of the same results.
I guess I was just trying to understand with the OEM charger where the "shorting takes place.
nm3th said:
That should work, but kinda overkill. It's less cumbersome to either modify a dedicated cable or the car charger itself. Just short circuit the two middle pins.
Thanks for the research OP. Btw are you on AVS?
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
over2land said:
Thanks pj_rage.
I'm pretty good electrically, but a bit less so with google. I searched, and likely didn't use the right string (happens pretty often with me). Got a diagram or a link to a diagram so I can see which two pins need shorting?
Makes more sense to me to go and modify all my car chargers rather than modify cables. I'll never use a car charger to transfer data to a computer, but might use a cable in a car in a pinch if I needed to.
Click to expand...
Click to collapse
I don't have a link to a diagram (you can just Google USB pinout if you want it). I can try to find one later if you still need it. You want the two data lines shorted together. If you cut the cable in half as I did, you only need to short them on the phone side. The other side you can leave open if you want.
But you're absolutely right it would probably be a better idea to short the pins on the charger side. My issue is that my chargers are not easily opened. The cable on the other hand is a quick mod.
If I did it again I would just shave off some insulation from the cable to access the wires without cutting them, leave the power connected, and just cut and short the two data lines on the phone side and tape or heat shrink it up. Fwiw the power lines on my cable were red and black, black being ground, and the data lines were yellow and green. I believe this is standard but I should advise you that it would be prudent to beep it out to the connectors to be certain.
Regarding using an inverter and your home charger in your car, yes this would give you the best charge rate. Supposedly the linked Motorola charger has the pins shorted which would be a less cumbersome setup to provide the same or very similar charging rate. I've ordered one, so I'll report back.
And yeah I'm on AVS as well, same username.
Sent from my SAMSUNG-SGH-I717 using XDA App
When ever I drive, I have my phone hooked up to my Escort Red Line radar detector and my car's stereo via bluetooth (both). In order for me to use the radar detector effective, I need to have GPS and Blueooth enabled. This is a HUGE SUPER OMG battery drainer for my amaze. 20 minutes drive kills about 35% of the phone's power. My radar detector offers a slot to charge my phone BUT it still drains, not enough juice flowing in. Someone said it is because it's probably a .5amp.
So I am running a extension from the 12v lighter that's in the trunk to the front of my car. Amazon has a generic 2.1amp for 3 bucks.
http://www.amazon.com/Premium-Heavy...121&sr=8-1&keywords=htc+amaze+car+charger+amp
But on ebay, I found the original HTC car charger for 15 bucks which is a 1amp.
http://www.ebay.com/itm/HTC-Amaze-4...918506?pt=PDA_Accessories&hash=item27c867022a
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
The 2.1 amp is probably 1 amp per port. Although it does not seem to specify.
F9zSlavik said:
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
Click to expand...
Click to collapse
Right!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 08:41 AM ----------
soundping said:
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
Click to expand...
Click to collapse
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Higher voltage will trip a warning window telling you to disconnect and use official HTC equipment.
The phone monitors input voltage to protect the equipment.
nyc_tdi said:
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Click to expand...
Click to collapse
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
I recently got an Amaze and am generally happy with it. The biggest problem I have right now is finding the right car charger for it because the car charger I previously used (a 1A monoprice car charger) doesn't give it enough charge. I have been reading through the forums and some has been saying that if the charger is not working properly, it will recognize it as charging via USB rather than AC. In my case, the phone seems to be reading it as charging through AC, but there still doesn't seem to be enough current going through it. The phone will only charge if NOTHING is going on (i.e. screen's off, no GPS, etc.). I've been using CoPilot GPS and it draws the battery like crazy. Anyone has any idea as to which car charger would work properly with the Amaze such that I'll be able to charge (or at least maintain the charge) while using it as a GPS? Do I need to go up to a 2.1A charger?
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
I couldve sworn we talked about this months ago. Let me see if I can find the thread.
nguyendqh said:
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
Click to expand...
Click to collapse
you won't get the full 2.1a unless you usee a charge only cable or modify the charger as I stated above...
I ended up getting a 2.1A car charger and a USB charge only cable, and it's working perfectly. When I have the screen on full brightness and doing navigation with Co-Pilot GPS, my phone's no longer losing charge and is actually charging. The combo also works with my tablet as well.
blast0id said:
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
Click to expand...
Click to collapse
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Silentbtdeadly said:
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Click to expand...
Click to collapse
I have done this to every single one of my USB car chargers... not a single issue...
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
I'm using old charges at home and in the office and it did seems slow but had not heard of rapid charge. Will the phone indicate this rapid charge mode? If not, is it real?
I'm getting slow charging even on the stock HTC charger. Not sure how I can enable this rapid charge cause 4+ hours from 0-1% to full is a bit ridiculous.
use orginal charger is best , maybe it has some relationship with your battery life
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
flooty333 said:
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
Click to expand...
Click to collapse
Try to change your phone
c5satellite2 said:
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i've done exactly this, and damned if the One still refuses to draw more than ~500 ma off of anything but the 2.1 A wallwart it came with (i don't have any others to try with). i'm about to dig out an old inverter to see if that will actually work. wish i'd paid more attention to my EE dad when i lived at home; i've gotten a serious crash course in this stuff while trying to get my One to charge in my car, when it's on.
edit: so i got my old inverter out, and spent about 15 minutes testing. i used the 2.0A adapter that came with my Nexus 7 to test, as well as the 3.1A Mediabridge adapter i got here. my phone was at about 45% when i started testing. unplugged, Battery Monitor Widget reported a drain of anywhere between 500ma and 650ma (running Ingress, wifi on). plugged in to the Mediabridge adapter showed, at best, a drain of 50ma. the Nexus adapter plugged in to my inverter charged at a fairly consistent ~120ma. i didn't touch my phone the entire time.
i left my Nexus 7 at work so i can't use it to repeat the test, but i will do so tomorrow. the cable i'm using is this one. i'm not crazy about having a ridiculous DC-AC inverter in my car for my phone, but if that's what i have to do so it can be used and not drain, then so be it. admittedly, i don't really understand these things enough to explain these variations, but i plan on learning ASAP. perhaps somebody else can shed some light on why the device charges different, and how it identifies an AC-USB adapter vs a DC-USB adapter.
sluflyer06 said:
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
Click to expand...
Click to collapse
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
nest75068 said:
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
Click to expand...
Click to collapse
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
veener79 said:
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Click to expand...
Click to collapse
Same here, 2a Nexus 7 brick with a long Logitech USB cable, much faster than stock (and longer)
Harbinger1080 said:
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
Click to expand...
Click to collapse
I'm fortunate my car has a built in inverter that I use for charging my phone.
nest75068 said:
I'm fortunate my car has a built in inverter that I use for charging my phone.
Click to expand...
Click to collapse
My next car will too, because I can only imagine that power requirements for these devices is going to increase.
That said, I think I have a winner, and instead of retyping my posts, I'll just link to that thread instead: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6
Since the snap Dragon 600 has fast charging capabilities, why didn't HTC Include it in the kernel??? I've noticed my 2500 mAh note battery charges faster than my 2300 MAH HTC one
Sent from the Sexiest Android Device (HTC One)
I just got my LG G2 yesterday. I also have a Nexus 7 2013 and an old Galaxy Nexus. I have a Nexus 7 charger at home and work. I have a modified Fast Charge 2.0A Car charger.
My N7 and GN could "AC" charge off of all of them. The G2 is "slow" charging off all of them. They are all 3 different models of chargers, all above 2.0A so there is plenty of oomph to get it the power it needs.
So whats up with that?
I just tested it. It isn't the Charger but the damn cables. Does LG have some kind of funky pinout for the charger?! Using the supplied cable, it is working on all of my other chargers. If I use my old cable it "Slow Charges" even with the included LG USB Charger.
So something in that cable is altering the amount of power it gets. That SUCKS!
My Nexus 7 will AC charge off the LG Cable. So it's something with that cable that the G2 likes.
LG is notorious for changing stuff around. On the G2x they flipped around the headphone control pins and came out with an additional headset for extra $$ which rendered every other headset with music controls useless. So basically now I have to go and replace all of my USB cables with something LG likes (which will almost be impossible to order something online). Anyone else having issues with other chargers? Luckily it IS taking a charge but just at USB speeds (Slow charge). I use Qi Charging at home for at night, so that isn't an issue but in my Home Office, Work Office, and (especially) my Car I need a fast charge. In the Car, using GPS with the screen on will still deplete on USB power. A fast charge is the only one that can still charge the battery under a heavy load. Similar to watching a movie probably.
All my USB cables woks fine. I would use the included Amazon Kindle cable since it is easily the longest cable with out issue. However older cables do have the problem you described but I suspect it isn't something LG specifics but rather the amount of pins connected in the cables.
-LG G2
I found that my Samsung cables from my S4 and Note 2 work fine with the G2, but any of my other cables, whether they be the cheap $3 ones, ones from other phones, or expensive ones, only charge at the slow rate. I'm hoping we can get a custom kernel that removes that restriction.
So it charges a little slower. Is this a major issue? If so, use the charger provided. Failing to see the problem here.
Maybe its just me. I get that a lot.
My Note 2 2A charger and USB works just fine. If not faster.
Sent from my LG-D802 using xda premium
My N7 2013 charger works perfectly.
player911 said:
I just got my LG G2 yesterday. I also have a Nexus 7 2013 and an old Galaxy Nexus. I have a Nexus 7 charger at home and work. I have a modified Fast Charge 2.0A Car charger.
My N7 and GN could "AC" charge off of all of them. The G2 is "slow" charging off all of them. They are all 3 different models of chargers, all above 2.0A so there is plenty of oomph to get it the power it needs.
So whats up with that?
I just tested it. It isn't the Charger but the damn cables. Does LG have some kind of funky pinout for the charger?! Using the supplied cable, it is working on all of my other chargers. If I use my old cable it "Slow Charges" even with the included LG USB Charger.
So something in that cable is altering the amount of power it gets. That SUCKS!
My Nexus 7 will AC charge off the LG Cable. So it's something with that cable that the G2 likes.
LG is notorious for changing stuff around. On the G2x they flipped around the headphone control pins and came out with an additional headset for extra $$ which rendered every other headset with music controls useless. So basically now I have to go and replace all of my USB cables with something LG likes (which will almost be impossible to order something online). Anyone else having issues with other chargers? Luckily it IS taking a charge but just at USB speeds (Slow charge). I use Qi Charging at home for at night, so that isn't an issue but in my Home Office, Work Office, and (especially) my Car I need a fast charge. In the Car, using GPS with the screen on will still deplete on USB power. A fast charge is the only one that can still charge the battery under a heavy load. Similar to watching a movie probably.
Click to expand...
Click to collapse
Have you tried going to settings>general>PC connection and setting "charge phone" there, as the phone limits the current allowed through if it's on MTP because MTP simply can't handle it.
Sent from my LG-D802 using xda app-developers app
Semantics said:
My N7 2013 charger works perfectly.
Click to expand...
Click to collapse
I am also using N7 2013 charger and it charged pretty fast. But now i'm also trying out a speakerdock. I don't know how fast that is but the n7 charger is pretty fast.
Sent from my LG-D802 using xda app-developers app
I have the same problem OP. if I don't go to bed early enough for slow charge to feed this monster battery I wake up below 100%. It really isn't that big of an issue because the battery lasts anyways but I don't like leaving home below 100%.
Sent from my LG-D800 using xda app-developers app
rfarrah said:
So it charges a little slower. Is this a major issue? If so, use the charger provided. Failing to see the problem here.
Maybe its just me. I get that a lot.
Click to expand...
Click to collapse
The Problem is that it is annoying. Not only is it charging "Slower" but also throw a icon up in the Status bar that you can't dismiss that says "Slow Charging. To Charge faster, use the original charger".
But I want to repeat that it is NOT the actual charger but the USB cables. It WILL fast charge (aka normal charge) using all of my various chargers WHEN I use specific USB Cables. Most of my cables will only slow charge, which is equivalent to a USB trickle charge that can't even charge it fast enough to power the screen. If you use the device in this mode, it still loses power with the screen on.
It just seems there is something in the cable itself that is either not connected or passing through the info to turn up the faster charging. I know the cables are Power+Data cables because I use them for ADB and MPT.
Most cables are not working. I've found a few that are. Unfortunately my 10ft desk cables and my curly car one is NOT working.
The Original Nexus 7 was picky about chargers. It wouldn't even see my car charger where my Galaxy Nexus and New Nexus 7 2013 both show AC (fast charge).
I think the difference between a slow charge and a fast charge is something like 0-100% on fast charge is 3 hours where it's like 9-10 on a slow charge. THAT is the problem.
Update:
Seems this is a legitimate case regarding the Verizon LG G2s AFTER they've received the latest OTA update. It will only charge normally on the included cable. All other cables will result in a Notification that the phone is "Slow Charging" and charges only on 500mAh. You cannot dismiss the notification. Which is the annoying part.
Current ongoing discussions are here:
http://forum.xda-developers.com/showthread.php?t=2460881
As of this posting, it affects all Verizon G2 users and there is no solution. We suspect it is just a Verizon bug. No other cables will charge normally.
No. Mentioned in that thread, my car charger from Verizon charges at ~1000mA. Long, curly, and thick. The new one with the LED and shorted pins. Attached cable and USB work on said charger. The problem is AWG, short, and voltage drops. I have yet to find a working usb cable though.
Mine (D802, EU model, GB variant):
- Belkin Charger 2.1A, N7 2013 cable -> slow charging
- N7 2013 charger + N7 2013 cable -> fast charging
So it's not just the cable; it's also dependent on the charger.
The voltage drop in the cable will cause the phone to draw a substantially lower charge. Therr doesn't seem to be anything unusual about the cable other than it being unusually good quality, being thick and short.
When charging, it's important having a charger with the data pins shorted, but I think most wall charger are. The slow charge warnings are something special in the Verizon models, I only get a slow charge warning when It's actually slow on my d802.
It will appear as though there is a difference of what will happen if there is a voltage drop in the cable based in your carrier model, but the hardware which charges the phone should be standard, albeit probably better quality than most other chargers.
Sent from my LG-D802 using XDA Premium 4 mobile app
Hmnmm
I stopped worrying about cables, adapters, etc by using a TYLT VU wireless charger. It chargers both my Verizon lg g2 and my Nexus 7-2013 fully and quickly. My g2 takes only 2-3 hours and my Nexus is in a leather case.
No wworries, just lay either one on its 45 degee angle platform and forget about it. Truly a wonderful charger.
I have a Samsung Qi Charger. I don't worry about it but there is a software bug with the Verizon model since the OTA update. Another thread listed above tells of the details.
Sent from my Nexus 7 using XDA Premium 4 mobile app
the solution is simple. just shortcircut data+ and data- and it will fast charge.
hopefully som Kernel hacker can build us a new Kernel. when the phone detect data connection it goes to 500mah. if u chortcircut them 1a+
maydayind said:
the solution is simple. just shortcircut data+ and data- and it will fast charge.
hopefully som Kernel hacker can build us a new Kernel. when the phone detect data connection it goes to 500mah. if u chortcircut them 1a+
Click to expand...
Click to collapse
This is NOT the case. The Verizon variant is very picky and requires a 24g USB 3.0 cable or else it will force slow charging at 500mah.
There is a whole thread with findings thats like 30 pages long. The Verizon model is not behaving like the other variants, so unless you have a Verizon model with the latest OTA and have personally tested and found a working solution, then you need not comment.
This thread should be closed so random uninformed persons stop making false accusations. This thread was started over a real problem but didn't take off. Another thread was created that did, and it is linked above. This is a real problem with a real solution. All real findings and discoveries are listed in that active thread listed above.
This should be a place holder for searches but needs no new comments. Please direct all comments to the other thread linked above.
Sent from my Nexus 7 using XDA Premium 4 mobile app
And linked here for easy reference:
http://forum.xda-developers.com/showthread.php?t=2460881
Swyped from my Incredible 4G using Tapatalk Pro 12-10