Related
help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks
Hello all... tried to be a little geek and installed a custom Rom (Artemis V32 with radio 2.12.50.02_2) and that went ok. Then I copied an Android version to my sd card, and that went also ok.
Then I installed a bootloader so I could choose Android or WM, that went ok too.
But since then I had some regular crashes in Android and also with WM.
I decided to install a stock Rom (found via Usenet; Stock ROM (NLD) 1.72.172.0 met radio 2.07.51.22_2 en SPL-1.66.0000 ) and things went bad.
I have tried all kinds of things so resolve the issue:
- Put the stock rom on the sd card (formatted fat32, size 4gig) and renamed it to loeimg.nbh and started it up with the volume button down: no success
Message:
PB1100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
- Connected the hd2 with the original cable to my pc (Windows 7 Ultimate, and tried also WinXP SP3) and tried to install it via the .exe file from another stock rom I downloaded via the HTC website.No succes, the software starts-up, I can click yes, next, click yes again at "I completed the steps indicated above" and then I get the screen current information about your pda phone Image version does not mention any version at this point.
If I then click on update I get the screen that says from image version: to image version.
The from version is not filled in, so I think the fault has something to do with this.
After I clicknext 2 times I get the progress screen, but nothing happens then anymore. It keeps showing 0%
If anyone can help me out with this it would appreciate it a lot! And if you need any additional info, please let me know...
Thanks in advance,
Friendly greetings...
you no longer have hspl installed. It was removed by the (failed) stock rom from sd card flash attempt. In bootloader, see your spl ends .0000? that tells you hspl is gone.
Manually enter bootloader, connect usb, count to 20, run hspl2(right click run as administrator), choose 2.08.hspl.
When it completes, re enter bootlaoder (hold down vol as the phone restarts at 100%), wait for bootloader, wait for the word serial -> usb, run your rom flash over usb.
Thanks for the quick reply... as soon as I'm back home I'm going to try it out.. I'll post the result here..
something similiar happened to me some months ago..
should work
DN41
oh, and the reason the "from version" is blank is because that is read from the registry, but we put the phone in bootloader ourselves first so it can't see the registry. that's also why when you flash radios you see rom version info there. it can be ignored.
Do not forget to remove loeimg.nbh from your memory card before trying to flash under windows.
Thanks for the reactions... great to know I am not alone in this...
I performed the actions as described and I got the message "we hacked it"
I then tried to install a stock rom I downloaded but my phone turned off then at 11%
I have the idea that my battery is not loading anymore as I can't see the orange led burning when connected to the adapter/computer.
Ordered a new battery yesterday evening and will receive it normaly/hopefully today by mail. Then I will try again and share the results.
Thanks again all for the great support so far...
check the battery pins closely, hundreds of people have bent them poppng the battery out.
Ok, checked the connection of the pins.. these are ok I think.
Battery-led is still not showing went connected to usb.
So now my screen states the following:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CottulaHSPL 0x40
What rom can I now install? Only an official one?
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
I feel the noob-level is rising extremely now...
TitusV said:
What rom can I now install? Only an official one?
SPL-2.08.HSPL 8G XE
Click to expand...
Click to collapse
.hspl means hspl is installed so you can flash any rom.
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
(
Click to expand...
Click to collapse
all i can say is try another rom. just stick to usb flashing, protect hspl.
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
hi,
i'm having a problem with flashing WM6.5 into my HD2 after using Windows Phone 7.
i have HSPL3(i even tried HSPL2) installed. I can get to bootloader mode and it shows
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
but when i want to flash WM6.5 rom it goes through the welcome screens, first USB check ends up well, then it asks me if im sure with flashing the ROM with the other one and then when i click on the flash button the window with flash status appears but the phone is still stuck at 3colored screen and does nothing. Then after a while computer throws a window with Error that update utillity cannot get response from the phone. I don't know what am I doing wrong.
any help appreciated
You trying with your original stock ROM?
xavier_soares said:
You trying with your original stock ROM?
Click to expand...
Click to collapse
No, i have seen some tips here... and they say i can use in WM6.5 ROM i want.. or i can't?
janox1x2x3 said:
No, i have seen some tips here... and they say i can use in WM6.5 ROM i want.. or i can't?
Click to expand...
Click to collapse
See this friend http://forum.xda-developers.com/showthread.php?t=913641, I test with Duttys_2.5_5.23152.5.3.12_3.14_HD2_ML_Family_ROM_(V14)_WWE and second try flashing work very fine, WP7 to WM6.5, and again WM6.5 to WP7, all fine...
Regards,
Xavier Soares
stuck in the bootloader mode
................................
Please remove that imei for ur own safety
Can i know where to find the W.M 6.5 rom? because i also want to flash to W.M 6.5.. but i do not know how to do so..can anyone tell me?
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.