hi,
i'm having a problem with flashing WM6.5 into my HD2 after using Windows Phone 7.
i have HSPL3(i even tried HSPL2) installed. I can get to bootloader mode and it shows
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
but when i want to flash WM6.5 rom it goes through the welcome screens, first USB check ends up well, then it asks me if im sure with flashing the ROM with the other one and then when i click on the flash button the window with flash status appears but the phone is still stuck at 3colored screen and does nothing. Then after a while computer throws a window with Error that update utillity cannot get response from the phone. I don't know what am I doing wrong.
any help appreciated
You trying with your original stock ROM?
xavier_soares said:
You trying with your original stock ROM?
Click to expand...
Click to collapse
No, i have seen some tips here... and they say i can use in WM6.5 ROM i want.. or i can't?
janox1x2x3 said:
No, i have seen some tips here... and they say i can use in WM6.5 ROM i want.. or i can't?
Click to expand...
Click to collapse
See this friend http://forum.xda-developers.com/showthread.php?t=913641, I test with Duttys_2.5_5.23152.5.3.12_3.14_HD2_ML_Family_ROM_(V14)_WWE and second try flashing work very fine, WP7 to WM6.5, and again WM6.5 to WP7, all fine...
Regards,
Xavier Soares
stuck in the bootloader mode
................................
Please remove that imei for ur own safety
Can i know where to find the W.M 6.5 rom? because i also want to flash to W.M 6.5.. but i do not know how to do so..can anyone tell me?
Related
I have seen many threads about unlocking the CID for other phones, but none for the HTC-HD2. When I attempt to update my phone I get this error message, "ERROR [294] INVALID VENDOR ID". I assume my locked CID is causing this error, so how do I unlock this? Please help me, I really want to update my phone. Thanks in advance.
bahardman
did you try hspl man
i guess no need to cid unlock
Guidance please on flashing 1.48 when getting vendor id error
Hi there - I am pretty new to all of this. I am trying to flash a standard 1.48 rom upgrade obtained through this forum onto a previously O2 locked HD2. I did get an unlock code - which allows me to use my vodafone sim but when i try to use the standard RUU utility it comes up with the vendor ID error. How do I handle this - happy to be pointed to the right post elsewhere.
Mark
markout57 said:
Hi there - I am pretty new to all of this. I am trying to flash a standard 1.48 rom upgrade obtained through this forum onto a previously O2 locked HD2. I did get an unlock code - which allows me to use my vodafone sim but when i try to use the standard RUU utility it comes up with the vendor ID error. How do I handle this - happy to be pointed to the right post elsewhere.
Mark
Click to expand...
Click to collapse
just because you have a sim unlock does not mean you can flash a rom!
yah and just because you have hspl doesnt mean yu cannot unlock CID
tids2k said:
yah and just because you have hspl doesnt mean yu cannot unlock CID
Click to expand...
Click to collapse
The HSPL that is offered here does, indeed, unlock CID.
It says so in the description of the HSPL and it DOES work.
I have HSPL and a GER Vodafone CID-Lock (damn them). Now, I can flash any ROM and Radio (and, finally the 1.48 official upgrade!).
Cheers.
tids2k said:
yah and just because you have hspl doesnt mean yu cannot unlock CID
Click to expand...
Click to collapse
Ok ok - stop teasing the newbies! From my investigations seems to be HSPL? Whatever that might be.
Sorted - used HSPL and it worked a dream. You guys might be rude to newbies but you do seem to know what you are about.
Thanks all
cid still locked after HSPL2 install
Successfully installed HSPL 2. when i put ATT card in, it still asking for unlock code. Not work for my Tmobile US HD2. ;-(
markout57 said:
Sorted - used HSPL and it worked a dream. You guys might be rude to newbies but you do seem to know what you are about.
Thanks all
Click to expand...
Click to collapse
not a case of being rude at all, just please BROWSE the forum before asking.
clicking HERE works a treat for you.
HD2
Is there a program to CID unlock the HTC HD2? I looked everywhere but they are old and there is nothing about HD2: (
megido said:
Is there a program to CID unlock the HTC HD2? I looked everywhere but they are old and there is nothing about HD2: (
Click to expand...
Click to collapse
what about hspl and hspl2 and hspl3,they all cid unlock it,, (cos i know you didn't mean sim unlock, right?)
any solution
Any one found solution on how cid unlock htc hd2?
v3patel said:
Any one found solution on how cid unlock htc hd2?
Click to expand...
Click to collapse
omg HSPL UNLOCK CID for HD2. is so hard to read in this forum ??
Hi, I've flashed my HTC LEO with the latest HTC ROM with a SD card... and now i've got a SPL 3.03, that is not working with HSPL (even 3rd one).
Does anybody got a technique with MTTY to unlock my CID?
Should I use a Goldcard? or do I have to wait for an hypothetic HPSL4 (that integrate a SPL3.03 hack)?
sam here my HD2 is broken
These is hard xD
fuzzifikation said:
The HSPL that is offered here does, indeed, unlock CID.
It says so in the description of the HSPL and it DOES work.
I have HSPL and a GER Vodafone CID-Lock (damn them). Now, I can flash any ROM and Radio (and, finally the 1.48 official upgrade!).
Cheers.
Click to expand...
Click to collapse
_________________________________________________
Hi
What kinda HSPL can unlock CID
I have tried to unlock the CID for a week and searched for every think i now(Dont judge)
Can someone help me
Mathias
Hi there I have the same problem. I did everything I could and nothing works. I can only get to the bootloader and the info is in:
red screen says:
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
green screen says:
Upgrade ROM code error
Please try again
blue screen is empty
white screen says:
Serial
And if I connect to PC it will say USB which is ok.
But what now I am stuck here it will not take any ROM it starts upgrade and freezes at 0% or max 2%
I've tried "Task 29", tried some "mtty" couldn't do it, tried "ROM 3.14" again nothing and it is unbeliveable that nothing works even task 29.
I would appreciate any help cause now it's driving me crazy.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
jovanovic3 said:
Hi there I have the same problem. I did everything I could and nothing works. I can only get to the bootloader and the info is in:
red screen says:
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
green screen says:
Upgrade ROM code error
Please try again
blue screen is empty
white screen says:
Serial
And if I connect to PC it will say USB which is ok.
But what now I am stuck here it will not take any ROM it starts upgrade and freezes at 0% or max 2%
I've tried "Task 29", tried some "mtty" couldn't do it, tried "ROM 3.14" again nothing and it is unbeliveable that nothing works even task 29.
I would appreciate any help cause now it's driving me crazy.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
Click to expand...
Click to collapse
only the correct rom for your phone will work. go to htc website and find any rom that it lets you download using YOUR phones serial, and flash it.
Thanks mate I will try and let you know what I did.
help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
I have HTC HD2 t-mobile version. my phone now is broken i am not sour should I do with it anymore. it stuck at 1st screen. please help me
this my spl
PB81120 HX-B3
SPL-3.03.HSPL XE
0X05
CotullaHSPL 0X40
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
I download that it is install 8% and error
samsamuel said:
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
Click to expand...
Click to collapse
What did you do last before this issue occurred?
Search for "task29" and do this, that might also help. After that flash with your favorite rom(probably the one you were trying to flash)
You can also look on youtube for "task29 hd2" for some tutorials.
I was change my phone to andriod but I don't like it. so I want to change it back to window mobile when I doing it. it is error . so I try flash different radio and how it error. anyone have any idea how to make my phone working? I need phone to use please help me
thanks so much
Marvlesz said:
What did you do last before this issue occurred?
Click to expand...
Click to collapse
Hi, happy to join this comunity!!
Hi, I found no one case like the mine on internet, so I hope you can help me!
I've a HTC HD2 T8585. I don't know anything about his previous life, so I don't know why now is on that conditions.
When I power on the phone, a grey screen with this written on appears:
flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED
Nothing else happen.
I've try to flash via sd-card a original rom, downloaded directly from htc. The update success, but still same situation.
If I go in download mode, I see:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Sometimes, apparently casually, the phone vibrate 6 times.
Just 2 times the phone has started, but when all is loaded, I see that touch screen doesn't work. If I restart the phone, the same problem (flash type ecc) happen.
So I don't know.. probably a wrong rom has been installed? what can I do?
I'm from Italy, and I would to revive this phone, indifferently with wf or with android!
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
No one? :crying:
Resurrection
VoLv3R said:
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
Click to expand...
Click to collapse
To ask this questions you have to do it in Android section, BTW, to boot into MAGLRD you have to reboot your phone and keep pushing power button.