Hi, happy to join this comunity!!
Hi, I found no one case like the mine on internet, so I hope you can help me!
I've a HTC HD2 T8585. I don't know anything about his previous life, so I don't know why now is on that conditions.
When I power on the phone, a grey screen with this written on appears:
flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED
Nothing else happen.
I've try to flash via sd-card a original rom, downloaded directly from htc. The update success, but still same situation.
If I go in download mode, I see:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Sometimes, apparently casually, the phone vibrate 6 times.
Just 2 times the phone has started, but when all is loaded, I see that touch screen doesn't work. If I restart the phone, the same problem (flash type ecc) happen.
So I don't know.. probably a wrong rom has been installed? what can I do?
I'm from Italy, and I would to revive this phone, indifferently with wf or with android!
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
No one? :crying:
Resurrection
VoLv3R said:
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
Click to expand...
Click to collapse
To ask this questions you have to do it in Android section, BTW, to boot into MAGLRD you have to reboot your phone and keep pushing power button.
Related
Hello all... tried to be a little geek and installed a custom Rom (Artemis V32 with radio 2.12.50.02_2) and that went ok. Then I copied an Android version to my sd card, and that went also ok.
Then I installed a bootloader so I could choose Android or WM, that went ok too.
But since then I had some regular crashes in Android and also with WM.
I decided to install a stock Rom (found via Usenet; Stock ROM (NLD) 1.72.172.0 met radio 2.07.51.22_2 en SPL-1.66.0000 ) and things went bad.
I have tried all kinds of things so resolve the issue:
- Put the stock rom on the sd card (formatted fat32, size 4gig) and renamed it to loeimg.nbh and started it up with the volume button down: no success
Message:
PB1100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
- Connected the hd2 with the original cable to my pc (Windows 7 Ultimate, and tried also WinXP SP3) and tried to install it via the .exe file from another stock rom I downloaded via the HTC website.No succes, the software starts-up, I can click yes, next, click yes again at "I completed the steps indicated above" and then I get the screen current information about your pda phone Image version does not mention any version at this point.
If I then click on update I get the screen that says from image version: to image version.
The from version is not filled in, so I think the fault has something to do with this.
After I clicknext 2 times I get the progress screen, but nothing happens then anymore. It keeps showing 0%
If anyone can help me out with this it would appreciate it a lot! And if you need any additional info, please let me know...
Thanks in advance,
Friendly greetings...
you no longer have hspl installed. It was removed by the (failed) stock rom from sd card flash attempt. In bootloader, see your spl ends .0000? that tells you hspl is gone.
Manually enter bootloader, connect usb, count to 20, run hspl2(right click run as administrator), choose 2.08.hspl.
When it completes, re enter bootlaoder (hold down vol as the phone restarts at 100%), wait for bootloader, wait for the word serial -> usb, run your rom flash over usb.
Thanks for the quick reply... as soon as I'm back home I'm going to try it out.. I'll post the result here..
something similiar happened to me some months ago..
should work
DN41
oh, and the reason the "from version" is blank is because that is read from the registry, but we put the phone in bootloader ourselves first so it can't see the registry. that's also why when you flash radios you see rom version info there. it can be ignored.
Do not forget to remove loeimg.nbh from your memory card before trying to flash under windows.
Thanks for the reactions... great to know I am not alone in this...
I performed the actions as described and I got the message "we hacked it"
I then tried to install a stock rom I downloaded but my phone turned off then at 11%
I have the idea that my battery is not loading anymore as I can't see the orange led burning when connected to the adapter/computer.
Ordered a new battery yesterday evening and will receive it normaly/hopefully today by mail. Then I will try again and share the results.
Thanks again all for the great support so far...
check the battery pins closely, hundreds of people have bent them poppng the battery out.
Ok, checked the connection of the pins.. these are ok I think.
Battery-led is still not showing went connected to usb.
So now my screen states the following:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CottulaHSPL 0x40
What rom can I now install? Only an official one?
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
I feel the noob-level is rising extremely now...
TitusV said:
What rom can I now install? Only an official one?
SPL-2.08.HSPL 8G XE
Click to expand...
Click to collapse
.hspl means hspl is installed so you can flash any rom.
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
(
Click to expand...
Click to collapse
all i can say is try another rom. just stick to usb flashing, protect hspl.
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
Hi there I have the serious problem. I did everything I could and nothing works. I can only get to the bootloader and the info is:
in red screen says:
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
in green screen says:
Upgrade ROM code error
Please try again
in blue screen is empty
in white screen says:
Serial
And if I connect to PC it will say USB which is ok.
But what now I am stuck here it will not take any ROM it starts upgrade and freezes at 0% or max 2%
I've tried "Task 29", tried some "mtty" couldn't do it, tried "ROM 3.14" again nothing and it is unbelievable that nothing works even task 29. Red a lot of treads in XDA forum but everything I've tried didn't help, maybe I missed something so I am asking anyone to be so kind and help.
I would appreciate any help cause now it's driving me crazy.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
Try to flash new ROM (original 3.14) via SD card. There are many tutorial how to do it (here on xda).
just answered you in the q+a thread.
cross posting is considered bad form. we know you're panicking, but calm yourself. panic and fear will make you more likely to make a permanent error.
Thanks a lot I just id it and it works perfectly, I was so sure that it's a deadend but thanks to you its up again. My only question is now can I take it back to service provider cause I think it has a RAM memory problem or do I have to do task 29 first and then install the same ROM again?
Again thank you very much for your help
If you are still on stock ROM 3.14; don't use Task29 (it isn't compatible with spl 3.03à
I bought T-mobile Htc hd2. I tried to flash it but now when I go to bootloader screen It is written "Upgrade ROM code error Please try again". Also It is
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I am new whis all of this, read a lot of in here, but I dont now what to do. What rom should I try to install firstly? And how? Maybe someone could help? Please...
sounds like the flash failed, shame you didn't include the full name of what you tried to flash, now we'll all just have to guess, and so wont be able to help quite as well.
Easy recover.
get tmobile rom from
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo2
use the sd card method to flash it.
I tried to flash to v 2.10.531.0, it was succesfull, but the problem with radio started when i tried to flash to v 3.14. What would you sugest me to do? I installed radio 2.08.50... and mgldr 1.13, just when i try to go to menu it doesnt show, only when turn of the phone for sometime. After that i managed to flash DL.Desire.v4.31.44.12 over mgldr, but again it doesnt start after i force to start over mgldr menu it loads until "Load done!" and the "1E FATAL HIT 1" shows up. I dont understand what to do now.
ahh well in that case im sorry to say it sounds more like either hardware or low level microcode or perhaps stuck radio (Look out for radio_rsa fail when flashign from sd card) problems.
My advice would be to get a stock tmous rom and flash it from SD card, and fingers crossed its something that just fixes itself.
Does v 2.13.513.1 will be good to do that?
Sure, , , , ,
Ok, i just flashed to v 2.13.531.1 succesfully, but it stuck on screen "stick together". Maybe someone nows what can i do next? I think that its problem with hardware. Because it was android when i bought it and after i did hard reset in android it did not boot anymore, so maybe something happened with hardware? So what only solution will be to take it to service?
Note: I've seen a few similar threads with a problem like mine, but my HD2 is showing different error messages, so I thought I'd start a new thread to avoid making things worse.
---------------------------------
So I purchased a second hand HTC HD2 pretty cheap. It's the 512HD2 and it came flashed with a MIUI Android with a Samsung Galaxy S2-ish interface. Problem was, the battery got drained way too quickly, even from the most minimal usage, so I though I should flash back to the stock OS and get my problem solved so I could use the HD2 as a primary phone.
Here's what I did:
1. I followed jayceooi's tutorial.
2. I downloaded a ROM Update for HTC HD2 (3.14.405.2) from HTC's Official HD2 download page.
3. I opened up the .exe, got the .nbh, renamed it correctly, put it on the SD card and then verified it's really there with an Android file manager.
4. VolDown + PowerButton and I got to the rainbow menu thing (I know, I'm a noob and I don't know how it's called) then I let go of the keys and got to the update screen.
5. PowerButton - Update begins
6. 30 seconds later, only after about 1/4 of the bar had progressed, I got a black screen, and then a screen that says "Software update failed. Please try again". Afterwards the gray screen saying "Loading... 00028002 not allow". Finally, back to the RGB screen I got:
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And If i try to enter the boot mode via VolDown+PowerButton I get:
RUUNBH
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Update ROM code error
Please try again
Serial
---------------------------------
Should I try a USB flash or something?
Thanks in advance.
?
Nobody?
Update:
I tried to upgrade from 3.03.0000 SPL to the 3.03.0000 HSPL via USB in the boot mode, but I got a critical error and nothing happened on the device whatsoever - same state as the post above.
Any ideas?
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
samsamuel said:
just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
Unfortunately I have only one laptop with a 32 bit Win7, but it's OLD and crapfull of viruses so I'm not risking any failures there.
Do you think it will be safe to HSPL over VMWare (virtual OS environment inside of windows)?
P.S.: Exact model is the HTC HD2 T8585. I checked it via an IMEI checker.
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
samsamuel said:
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
Click to expand...
Click to collapse
Ok, in that case I'll probably go over at a friend's house and try an HSPL there. I'll come back with some results as soon as I'm done.
Halfway done?
OK, so I got a good Windows 7 32 bit laptop and tried out HSPL4.exe by DFT. I kept my fingers crossed and, thankfully, I got to the "We hacked it! " screen.
After successfully updating and removing the USB cable, the phone rebooted with the same "Software Update Failed" message, but this time the gray screen showed the Cancel/Allow for the leoimg on the SD. I pressed the power button to attempt a flash, but I got the same issue as last time.
After that, the VolDown + PowerButton STILL showed:
SPL-3.03.0000
Since I'm not that stupid (I hope) I figured that the ROM reverts SPL and Radio to normal and that's why there was no trace of the HSPL, so I went back to the laptop to go at another 3.03.0000 HSPL. This time, after I got the "We hacked it! " screen I cancelled the ROM update and thankfully the RGB screen now reads:
P81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
IN SHORT - The HSPL was a success, now if you help me find the right ROM, I would owe you my life!
lol, i draw the line at advising roms, for example ive never used an android rom with sense, or a MIUI rom, and i havent used a winmo rom in about a year,, so it would be unfair of me to guide you.
ROM
Edit - Okay, thanks for all your help!
P.S.: I just ran an Task29 to get rid of the constant Software Update error at each boot and now I can boot into the RGB screen without the RUUNBH error so I think that will make things easier. I'll probably find the ROM myself or ask somewhere else.
Thanks again!!!
thanks
samsamuel said:
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
if you were a girl I would kiss you
You saved my day. I was searching for my problem since 3 days and this has solved the problem
Finally Done!
@ParmakSokan - Hey! Looks like I'm not the only one samsamuel helped!
A little update - I finally have the phone in working condition! It is now running the stock Windows Mobile 6.5 specific for O2, since I figured out the device was purchased in the UK.
For anyone interested, I got the ROM from the official library of HD2 ROMs in 4shared, which I believe is held together thanks to xda-developers, so yeah - yet another KUDOS for that!
The HTC Sense UI is simply beautiful and I think I will actually stay with 6.5 for a few more months before considering 7.5 Mango.
P.S.: Moderators can mark the thread as solved.