Hi there I have the serious problem. I did everything I could and nothing works. I can only get to the bootloader and the info is:
in red screen says:
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
in green screen says:
Upgrade ROM code error
Please try again
in blue screen is empty
in white screen says:
Serial
And if I connect to PC it will say USB which is ok.
But what now I am stuck here it will not take any ROM it starts upgrade and freezes at 0% or max 2%
I've tried "Task 29", tried some "mtty" couldn't do it, tried "ROM 3.14" again nothing and it is unbelievable that nothing works even task 29. Red a lot of treads in XDA forum but everything I've tried didn't help, maybe I missed something so I am asking anyone to be so kind and help.
I would appreciate any help cause now it's driving me crazy.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
Try to flash new ROM (original 3.14) via SD card. There are many tutorial how to do it (here on xda).
just answered you in the q+a thread.
cross posting is considered bad form. we know you're panicking, but calm yourself. panic and fear will make you more likely to make a permanent error.
Thanks a lot I just id it and it works perfectly, I was so sure that it's a deadend but thanks to you its up again. My only question is now can I take it back to service provider cause I think it has a RAM memory problem or do I have to do task 29 first and then install the same ROM again?
Again thank you very much for your help
If you are still on stock ROM 3.14; don't use Task29 (it isn't compatible with spl 3.03à
Related
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
ps: I forgot to click on the "is this a question thread", but I think it's a question thread
I have HTC HD2 t-mobile version. my phone now is broken i am not sour should I do with it anymore. it stuck at 1st screen. please help me
this my spl
PB81120 HX-B3
SPL-3.03.HSPL XE
0X05
CotullaHSPL 0X40
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
I download that it is install 8% and error
samsamuel said:
T-Mobile.com
Get latest 3.14 rom
From bootloader (stripey screen)
Plug in USB cable
Run 3.14 rom.exe
Report results.
Click to expand...
Click to collapse
What did you do last before this issue occurred?
Search for "task29" and do this, that might also help. After that flash with your favorite rom(probably the one you were trying to flash)
You can also look on youtube for "task29 hd2" for some tutorials.
I was change my phone to andriod but I don't like it. so I want to change it back to window mobile when I doing it. it is error . so I try flash different radio and how it error. anyone have any idea how to make my phone working? I need phone to use please help me
thanks so much
Marvlesz said:
What did you do last before this issue occurred?
Click to expand...
Click to collapse
I bought T-mobile Htc hd2. I tried to flash it but now when I go to bootloader screen It is written "Upgrade ROM code error Please try again". Also It is
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I am new whis all of this, read a lot of in here, but I dont now what to do. What rom should I try to install firstly? And how? Maybe someone could help? Please...
sounds like the flash failed, shame you didn't include the full name of what you tried to flash, now we'll all just have to guess, and so wont be able to help quite as well.
Easy recover.
get tmobile rom from
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo2
use the sd card method to flash it.
I tried to flash to v 2.10.531.0, it was succesfull, but the problem with radio started when i tried to flash to v 3.14. What would you sugest me to do? I installed radio 2.08.50... and mgldr 1.13, just when i try to go to menu it doesnt show, only when turn of the phone for sometime. After that i managed to flash DL.Desire.v4.31.44.12 over mgldr, but again it doesnt start after i force to start over mgldr menu it loads until "Load done!" and the "1E FATAL HIT 1" shows up. I dont understand what to do now.
ahh well in that case im sorry to say it sounds more like either hardware or low level microcode or perhaps stuck radio (Look out for radio_rsa fail when flashign from sd card) problems.
My advice would be to get a stock tmous rom and flash it from SD card, and fingers crossed its something that just fixes itself.
Does v 2.13.513.1 will be good to do that?
Sure, , , , ,
Ok, i just flashed to v 2.13.531.1 succesfully, but it stuck on screen "stick together". Maybe someone nows what can i do next? I think that its problem with hardware. Because it was android when i bought it and after i did hard reset in android it did not boot anymore, so maybe something happened with hardware? So what only solution will be to take it to service?
Hey everyone.
Listen here is my problem. i installed android on my hd2 and after a day it gave me quite alot of issues like apps crashing . phone applications not working.
So i decided to take it back to windows 6.5.
I used the method of putting a nbh file in the SD card. of spl version 3.03.000. if was updating and then at once it stopped and said update failed. And since then its not starting its on the RED GREEN BLUE AND WHITE screen :/
it says
HX-BC
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
PLease help me what to do. i have no logo on my phone. all i get is a pink circle when i turn it on, so i dont knw whether i used the correct rom or not
SO please i need urgent help..
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
samsamuel said:
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
Click to expand...
Click to collapse
Thanks for the reply.. but i found the problem i was using an unbranded Rom .. but mine was a tmobile. since there was no logo on it i got a bit confused.
Hi, happy to join this comunity!!
Hi, I found no one case like the mine on internet, so I hope you can help me!
I've a HTC HD2 T8585. I don't know anything about his previous life, so I don't know why now is on that conditions.
When I power on the phone, a grey screen with this written on appears:
flash type 5510BCAD
power reason 1
BOOTUP_W_PWR_KEY_PRESSED
Nothing else happen.
I've try to flash via sd-card a original rom, downloaded directly from htc. The update success, but still same situation.
If I go in download mode, I see:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Sometimes, apparently casually, the phone vibrate 6 times.
Just 2 times the phone has started, but when all is loaded, I see that touch screen doesn't work. If I restart the phone, the same problem (flash type ecc) happen.
So I don't know.. probably a wrong rom has been installed? what can I do?
I'm from Italy, and I would to revive this phone, indifferently with wf or with android!
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
No one? :crying:
Resurrection
VoLv3R said:
**UPDATE*
I've try to install the hspl 2.08. I've followed the procedure for installing the andoid OS, but while flashing magldr, I can't view its menu in the phone, so I can't continue the flashing procedure. What do you think? will be possible revive the phone without a box? (i've octopus samsung-lg and atf, but nothing for htc)
Please help me!
Thank you very much!
Click to expand...
Click to collapse
To ask this questions you have to do it in Android section, BTW, to boot into MAGLRD you have to reboot your phone and keep pushing power button.