My galaxy ace reboot immediately after I have turned on my device and I have tried to change time, change CPU frequency etc, but it doesn't work, can anyone help me.?
reflash the rom u r currently using from clean state of galaxy ace..
that means, flash ur gingerbread from odin and then flash the rom
Thx
Sent from my GT-S5830 using xda premium
I would like to ask help from forum members. the problem is this, I have a samsung galaxy i9100 with LPQ rooted official rom and change it to Hydra-h2o v1.4.1 but will not start. hangs on the load of the kernel. When did you flash the rom wipe all concerned, but nothing happens. hopefully could help me. regards
Sent from my GT-I9100 using xda app-developers app
Menchathor said:
I would like to ask help from forum members. the problem is this, I have a samsung galaxy i9100 with LPQ rooted official rom and change it to Hydra-h2o v1.4.1 but will not start. hangs on the load of the kernel. When did you flash the rom wipe all concerned, but nothing happens. hopefully could help me. regards
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
what i suppose is that there is a conflict between the rom and the kernel, what i would suggest you do is install a different kernel, like siyah or N.E.A.K
try this first tho
1) go into mount and storage then format system
2) get the latest siyah on ur SD card and flash it from recovery
3) try reinstalling hydra
coming to my house proves it. but yesterday I did that but left with a semibrinck ... I am not sure why that was. thank you very much for the answer
Sent from my GT-I9100 using xda app-developers app
I flashed NeatRom lite as Second Rom and after I checked everything was ok, I went back into Recovery to flash Aroma mods. After a successful install of everything I wanted to install, I touched 'Next' to finish it all. But then it completely froze. Its been like that for more than half an hour. And I'm afraid to take out the battery, wondering if the phone will start again. Can anyone help me?
Sent from my brother's GT-S5830 using xda app-developers app
Anyone?
Please!
Please close the thread. I got it solved with rom developer.
Sent from my Galaxy S2 GT i9100
Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Regards
AW: [Q] Ace-i-Sure ROM Brick
Search before posting...
http://forum.xda-developers.com/showthread.php?t=1551156
Gesendet von meinem GT-S5830i mit Tapatalk 2
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Yunito53 said:
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Click to expand...
Click to collapse
Try going to Development section and check features of some ROMs and then try what you like
Why would you want our choice on your phone?
It's your phone and your choice
im using a mincr 2,8 an is estable and secure to flash
Sent from my GT-S5830i using xda app-developers app
Fix
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Cynosure Studios said:
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Click to expand...
Click to collapse
We all know that dude
It's from one of the stickies in Development Section
Hay guys I am noob here but I got same problem, is this rom
Need xxl2 firmware cause I have XXLI1 firmware? Something like that??
Sent from my GT-S5830i using xda premium
Its your phone its your choice.......heh heh heh.......class.:laugh:
Yunito53 said:
Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Click to expand...
Click to collapse
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Yunito53 said:
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Click to expand...
Click to collapse
It's not the problem of rom.
Freeze Some apps like maps, YouTube... those are working as background apps.
Turnoff wifi, GPS, packet data when not in use.
Selecting 2G only will improve battery backup.
Set Screen brightness to minimum level.
Sent from my GT-S5830i using xda app-developers app
Hello,
I read a while back that someone fried his screen by flashing the wrong file and ive got 2 questions.
I was running stock rom and now flashed cyanogenmod 9.0.0 I have an old backup but im not sure if its 9.1 or 9.0 so my question is if I try restoring is there a chance I wil mess up my phone?
Thanks
what is your phone? you are flashing ICS!? now!? nothing goes wrong until the file belongs to your phone. i suggest you to flash the latest jb of your region. good luck.
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC5.4 by Temasek
Sorry don't really understand I have a I9300
Sent from my GT-I9300 using xda app-developers app
1) frying touchscreen occurs when flashing note 2 files. Bigger screen needs more power. Too much power for s3 so fries
2) don't use ics. Unsafe on s3 for other reasons.
Sent from my GT-I9300 using Tapatalk 2
why would you flash CM9?