i want update mi android to 2.3.3 actually i have CM-6-2.0_Achotjan_freexperia_project 2.2 (froyo) my baseband is .54 and my kernel is 2.6.29 my question is, if I install baseband .71 it will be the same with .54? i mean can i do calls, text messanging? and other features? i live in southamerica - bolivia plz help me...
BB.71 as i believed is only for 2.3 ROM
so u must install the ROM first! and then flash the FTF for kernel and BB through flashtool
If you flash 71 your phone will likely not boot. This was what happened to me when I tried to go back to WolfBreak's CM6 after installing the SE 2.3.3
so, if i want 2.3.3 i must install BB .71 ? but my phone will work OK ?
yessssss because BB71 must go with 2.3!!!!!!
so, wich one i must install first? ROM android 2.3? or baseband.. .71? I have all files to upgrade from 2.2 to 2.3 but I dont know in wich folder of flashtool must copy baseband file (.ftf)
1. Flash rom in xrecovery,when you finish put out battery from phone
2. Copy ftf files to: flashtool/firmware
3.Open flashtool and click "flash"
4.Connect USB and put battery on and hold back button.
5.After it, reboot phone.
Mixed instructions
I'm seeing different instructions from different posts. Simply put, I want to get Android 2.3 on my xperia x10a (with AT&T).
Some guides say to install the baseband 2.1.71 FIRST, whereas this post says to install it AFTER you install the ROM. So which is correct?
Is it even possible to do this on an x10a ? Most pages say 2.1.71 baseband is for x10i, but some pages say it doesn't matter if you have a/i.
Please help to clear up this confusion. I want to get Gingerbread on my phone but the instructions are so chaotic I'm afraid I'll brick my phone.
I'm not an idiot; I'm a computer science major and have released an Andorid app that I developed solely on my own using vim/eclim/command line tools in Linux.
Thanks,
Xan
Please Confirm
Can someone please confirm that these instructions are correct?
Additionally I CAN NOT find a download for the Baseband .71 anywhere? Please help!!
1. Flash rom in xrecovery,when you finish put out battery from phone
2. Copy ftf files to: flashtool/firmware
3.Open flashtool and click "flash"
4.Connect USB and put battery on and hold back button.
5.After it, reboot phone.
Related
Hi,
I'm new here and i hope my english is not as bad as i think
I've installed the CM7 v21 for mini pro
It works very fine and I'm really satisfied
But I've one big problem
If I use the hardware keyboard, I can't use the touchscreen any more.
I have to reboot the phone, then the touchscreen works without any problem.
When I use the hardware keyboard again, I have the same problem...
Any suggestions?
Please help
Thanks
Kettex
Are there really no suggestions?
Did you make full wipe before flashing rom? What kernel do you use?
First at all thanks for the answer!
Yes I made a full wipe
I use the standard kernel:
kernel-version:
2.6.29
[email protected] #1
kettex said:
First at all thanks for the answer!
Yes I made a full wipe
I use the standard kernel:
kernel-version:
2.6.29
[email protected] #1
Click to expand...
Click to collapse
maybe one more wipe data -after- fresh installing of rom ? hm really don't know
I don't think the problem came up with the new rom, because I also had the problem with another rom (Andread 2.3.5)
I'll try a wipe again
Did you have 2.1.1.A.0.6 kernel and SE firmare before you flashed new ROM?
You need to download flashtool and install it, from this thread download 2.1.1.A.0.6 kernel and lybril files for that kernel. Third file is dual touch module and it's optional if you want dual touch Unzip ftf file and copy to subdirectory firmares of flashtool folder. Unziped lybril files copy to root of sd card.
Tutorial for using flashtool
Now proceed with step by step with steps below:
1. Charge your phone fully before going any further
2. Enter CWM and backup your current ROM
3. Turn off your phone and flash the kernel you downloaded
4. Turn on phone and enter CWM and flash lybril files
5. Turn off phone and repair your phone using PC Companion
6. After this steps turn on the phone, root it, install cwm again, flash new ROM and enjoy.
EDIT: added files to attachments
I'll try this, but all the download links are down
Doesn't work anyway... :-/
SEUS is official removed by Sony Ericsson but don't worry just download latest PC Companion and start your in flashmode (you can see green light in the corner) and go to the support zone and update your phone..Bingo your phone starts like its nothing happen
This post was not really helpful Maya ;-)
I repaired the phone with PC Companion and I flashed the stock rom --> everything was fine
But the problem with the touchscreen and the hardware keyboard even occured at stock rom 2.1 update 1
I followed the steps in the post above, but I got the same problem again and again...
kettex said:
This post was not really helpful Maya ;-)
I repaired the phone with PC Companion and I flashed the stock rom --> everything was fine
But the problem with the touchscreen and the hardware keyboard even occured at stock rom 2.1 update 1
I followed the steps in the post above, but I got the same problem again and again...
Click to expand...
Click to collapse
Maybe you got a hardware problem? some kind of loose connection that gets shorted when you slide the keyboard?
Hi all!
This how-to applies for locked bootloader phones.
What you will need?
ICS 4.0.3 ftf*: http://www.4shared.com/rar/2Lf1ikwm/ST18i_41A0562.html
ICS 4.0.4 ftf*: http://www.mediafire.com/?2o2glqbm6oyf9m9
Root_v5 hack: http://forum.xda-developers.com/showthread.php?t=1600728
CWM installer: http://forum.xda-developers.com/showthread.php?t=1346190
*Note: Alternatively download stripped down ftf files (kernel.sin + loader.sin):
ST18i_4.1.A.0.562_kernel.ftf http://www.mediafire.com/?gbs29dw3tzx765k
ST18i_4.1.B.0.431_kernel.ftf http://www.mediafire.com/?jz462u07zjxqd9h
Preliminary step:
= First off, install full ICS 4.0.4. You have to be on ICS 4.0.4 in order to proceed.
= The easiest way to do so is to use Flashtool to flash 4.0.4 ftf and DE-SELECT wipe data! Thus your current apps will be kept.
= By installing 4.0.4, if you had root, you will lose it. But worry not, here is what you should do:
Follow this 3-step process:
1) By using the Flashtool flash only the kernel (kernel.sin + loader.sin) from ICS 4.0.3
= For flashtool, Unknown Sources and Debugging must be checked in phone settings
= Put the ftf file into the firmware directory of flashtool (usually c:/Flashtool/Firmware), open flashtool and select flash, then flashmode, chose the 4.1.A.... firmware and select exclude Fota, system and baseband , select 'No final verification' and DE-SELECT wipe data, cache and apps log. Click OK and follow instructions (power off phone, press volume down button and plug the usb).
2) Boot the phone and do regular Root_v5 hack + CWM installation (CWM-5.0.2.7-nAa-r2)
= When it's finished you can root with the Root_v5 tool following its instructions
= Now install CWM recovery by using the CWM Installer following its instructions
3) By using the Flashtool flash only the original kernel from the ICS 4.0.4 provided ftf.
= For flashtool, Unknown Sources and Debugging must be checked in phone settings
= Now do the same operation as 1) with 4.0.4 ftf file and you're done.
Enjoy!
p.s. Thanks to Frakkia and others for useful tips.
perfect...
just made mistake first time, and flashed full rom 4.0.3
excellent find and solution until there is something simpler
Boot the phone and do regular Root_v5 hack + CWM installation (CWM-5.0.2.7-nAa-r2)
Click to expand...
Click to collapse
what is this ?!
can any one help me whit this ?
Thanks!!!
finally my phone can get root access....
or you could use the one by JJDoctor
zstoichev said:
Hi all!
Since I have my bootloader locked and I've updated to ICS 4.0.4 via ftf file, I have lost root. So, here is how to get root once again - it is an easy 3-step process:
By using the Flashtool flash only the kernel (kernel.sin + loader.sin) from ICS 4.0.3
Boot the phone and do regular Root_v5 hack + CWM installation (CWM-5.0.2.7-nAa-r2)
By using the Flashtool flash only the original kernel from the ICS 4.0.4 provided ftf.
You are done! Enjoy!
Click to expand...
Click to collapse
Hello
I do not understand everything. But I absolutely want my rooter Ray!
My Bootloader is locked
I am already in 4.4
how to lfashe the kernel (kernel.sin loader.sin +) 4.0.3 from ICS
and where can I find these elements.
how to flash the original kernel from the ICS 4.0.4 Provided ftf.
and or find these elements?
How to use Flashtool, i need your help
thank you
ben75011 said:
Hello
I do not understand everything. But I absolutely want my rooter Ray!
My Bootloader is locked
I am already in 4.4
how to lfashe the kernel (kernel.sin loader.sin +) 4.0.3 from ICS
and where can I find these elements.
how to flash the original kernel from the ICS 4.0.4 Provided ftf.
and or find these elements?
How to use Flashtool, i need your help
thank you
Click to expand...
Click to collapse
download 4.0.3 here: http://www.4shared.com/rar/2Lf1ikwm/ST18i_41A0562.html
download 4.0.4 here: http://www.mediafire.com/?2o2glqbm6oyf9m9
download root installer here: http://forum.xda-developers.com/showthread.php?t=1600728
and cwm with this: http://forum.xda-developers.com/showthread.php?t=1346190
Now, put the two rom files into the firmware directory of flashtool (usually c:/Flashtool/Firmware), open flashtool and select flash, then flashmode, chose the 4.1.A.... firmware and select exclude Fota, system and baseband , select 'No final verification' and DE-SELECT wipe data, cache and apps log. Click ok and follow instructions (power off phone, press volume down button and plug the usb).
When it's finished you can root with the tool for root following instructions(it needs 3 reboots if i don't make mistakes)
Now install cwm (first you need to install busibox with busybox installer in playstore).
Now do the same operation with firmware 4.0.4 and you're done.
It's easier to do then explain
zstoichev said:
Hi all!
Since I have my bootloader locked and I've updated to ICS 4.0.4 via ftf file, I have lost root. So, here is how to get root once again - it is an easy 3-step process:
By using the Flashtool flash only the kernel (kernel.sin + loader.sin) from ICS 4.0.3
Boot the phone and do regular Root_v5 hack + CWM installation (CWM-5.0.2.7-nAa-r2)
By using the Flashtool flash only the original kernel from the ICS 4.0.4 provided ftf.
You are done! Enjoy!
Click to expand...
Click to collapse
Hello
How flash i only the kernel from 4.04?
I can only with loader.sin.
Thanks
Just updated the first post with more instructions. Hope it helps.
You guys just open the ftf file with and zip opener, then delete everything except the META folder, kernel.sin and loader.sin, then flash it with Flashtool.
great solution for Locked Bootloader
Frakkia said:
download 4.0.3 here: http://www.4shared.com/rar/2Lf1ikwm/ST18i_41A0562.html
download 4.0.4 here: http://www.mediafire.com/?2o2glqbm6oyf9m9
download root installer here: http://forum.xda-developers.com/showthread.php?t=1600728
and cwm with this: http://forum.xda-developers.com/showthread.php?t=1346190
Now, put the two rom files into the firmware directory of flashtool (usually c:/Flashtool/Firmware), open flashtool and select flash, then flashmode, chose the 4.1.A.... firmware and select exclude Fota, system and baseband , select 'No final verification' and DE-SELECT wipe data, cache and apps log. Click ok and follow instructions (power off phone, press volume down button and plug the usb).
When it's finished you can root with the tool for root following instructions(it needs 3 reboots if i don't make mistakes)
Now install cwm (first you need to install busibox with busybox installer in playstore).
Now do the same operation with firmware 4.0.4 and you're done.
It's easier to do then explain
Click to expand...
Click to collapse
Very fine, its work perfectly !!!!!!
thanks a lot
how to mute camera xperia ray 4.0.4?
Hi, i've a question, i'm already on 4.0.3 stock with root and CWM, if i flash directly the 4.0.4 it work?
Then, if i flash it i need the redo the root and the CWM installation?
i lost every my installed app?
The .ftf file are in italian to?
Tx for answers.
Edit: i've tryied this guide, but if i does the same thing with 4.0.4 (flash only kernel) i remain on 4.0.3...
Where i make mistake?
repeatedly showing
"02/048/2012 03:48:11 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings"
i did both..still.. .wat to do now??
I followed all the steps (including the busybox installer before installing CWM) with no errors, still Android tells me it is 4.0.3 and firmware is 4.1.A.0.562. So, it was all for nothing or am I missing something?
AzulmArinO said:
I followed all the steps (including the busybox installer before installing CWM) with no errors, still Android tells me it is 4.0.3 and firmware is 4.1.A.0.562. So, it was all for nothing or am I missing something?
Click to expand...
Click to collapse
I've the same problem,if I flash only the kernel from 4.0.4 as the guide tell I remain on 4.0.3,so I flashed the system to,in that case I get the 4.0.4 but lost root.
Another thing: can do the same with European firmware? Or Nordic? Tx in advantage.
paolinhos said:
I've the same problem,if I flash only the kernel from 4.0.4 as the guide tell I remain on 4.0.3,so I flashed the system to,in that case I get the 4.0.4 but lost root.
Another thing: can do the same with European firmware? Or Nordic? Tx in advantage.
Click to expand...
Click to collapse
First you must have 4.0.4 on phone. I have updated my 4.0.3 via PCC to 4.0.4 (and I lost root). Then I made my own ftf.
If you have (non rooted) 4.0.4 on ray, than follow steps in #1. post
ps. Sorry for my bad english
paolinhos said:
Hi, i've tryied this guide, but if i does the same thing with 4.0.4 (flash only kernel) i remain on 4.0.3...
Where i make mistake?
Click to expand...
Click to collapse
The first post is updated.
Oh tx,i'll see if I can do that in the afternoon.
Another question,if I done that need to reinstall all my app?
I've does it wrong first time and flashed full 4.0.3,now the guide is more simple to understand. Tx :thumbup:
i install knight elf experimental full(kernel) by fastboot.when i close fastboot and turn on my phone dont turn on.work vibrate but not turn on
*my rom is ginger bread
*codename 9.3 eman expria
What kernel look like experimental full 10.1 ??
Please answer my quastion becuse my phone do not turn on ??
I have problem with knight elf kernel
why knight elf experimental full dont work on my neo v
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
megatpanji said:
make sure flash the right one.Night-Elf's kernel for GB
Edit : download link is broken.find it elsewhere.i saw it mirrored...dont remember,where it is...
Edit 2 : i searched for you : http://forum.xda-developers.com/showthread.php?t=1468043&page=56
Click to expand...
Click to collapse
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Help plz
7illa said:
Thank you for answer
Im sure im flash right kernel
sendspace.com/file/lu3dwc
forum.xda-developers.com/showthread.php?p=21896062
Click to expand...
Click to collapse
I think you are flash the wrong kernel, the kernel you've flashed is for ICS not for GB..
You may just have soft-bricked your phone, but don't fret . My Neo V was also got stuck on the SONY logo yesterday, after I tried to flash a custom ROM. The phone wouldn't even go into recovery mode. I tried many things to get my phone back up again including flashing the stock kernel, but nothing worked, except repairing it through PC Companion.
If nothing else works, you can try the "Repair" option in Sony PC Companion, which will flash your phone with the latest stock ROM and you will have to root it again (if you want). But BEWARE, all your phone data will be LOST, if not already backed up. If you are wondering where to find the "Repair" option in PC Companion, open the software >> Support Zone >> Update Firmware. On this small window where it asks you to connect your phone, you will see the "repair" option just below on this screen.
You may have done many wrong things, you need to divide kernel issues from rom ones.
Anyway you can set back to stock firmware (rom+kernel) flashing the fw you want with flashtool. Full wipe is a must. If you can't enter cwm right now you will lose your rom-data in order to restore phone.
When you flash a kernel you have to check which android rom it is build for (gb, ics, jb), or your phone will not be able to boot.
Then when you flash a rom you have to make full wipe and follow its instructions.
Of course if you flash whole stock firmware you don't have to worry about the things above.
Don't use PC companion, instead use Sony Update Service. If it refuses to help you, then flash fw manually with flashtool.
Sent from my MT15i using xda app-developers app
flash official .62 rom using flash tool and it'll work
then
flash nightelf GB kernel using fastboot or flashtool
after that reflash your rom
I'm new to the Android world and I wonder how do I root the x10 mini E10a that my brother gave me.
From what I've been reading, I must be very careful not to make the root on a wrong firmware version, so I would like your help, if possible, create a step-by-step.
And that is my phone information:
Model number: E10a
Firmware version: 2.1-update1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel version: 2.6.29 [email protected] #1
Build number: 2.0.A.0.504
Rooted with z4root. :good:
AW: [Q] Help to root
Paul_BR said:
I'm new to the Android world and I wonder how do I root the x10 mini E10a that my brother gave me.
From what I've been reading, I must be very careful not to make the root on a wrong firmware version, so I would like your help, if possible, create a step-by-step.
And that is my phone information:
Model number: E10a
Firmware version: 2.1-update1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel version: 2.6.29 [email protected] #1
Build number: 2.0.A.0.504
Click to expand...
Click to collapse
A quick guide:
1. Go to 'settings-apps' on your phone.
2. Check the option 'unknown sources'.
3. Go to 'settings-apps-development' and check the option 'USB-Debugging'
4.Download and install the software from this link (for windows):
http://forum.xda-developers.com/showthread.php?t=2122682
5. Connect your turned on phone to your computer (if its the first time you connected your phone, a popup like 'installing new driver software' could appear, wait till it says 'successfully installed')
6. Open the software you installed.
7. Click 'Root' in the newly opened window.
8. Wait for the process to finish.
9. Done! Your phone is rooted!
Please press thanks if I helped .
Sent from my U20i using xda app-developers app
Paul_BR said:
Rooted with z4root. :good:
Click to expand...
Click to collapse
Use flashtool or superoneclick for the computer
Now I'm trying to install a ROM, but the requiriments are:
Root and CWM Recovery already installed
Latest 2.1.1.A.0.6 SE firmware due to kernel dependencies.
My firmware version is 2.0.A.0.504 so I tried it below:
Force-update to 2.1.1.A.0.6
Grab this build.prop file and copy it to your sdcard
Using Root explorer, backup your /system/build.prop file and copy the grabbed build.prop file to /system/build.prop
Reboot twice and try to re-update your firware. You might need to force-update if SEUS or PC-Companion says you already have the latest firware.
Once the update completes, check again your firmware version.
Unfortunately, after I did it above, still can't update the firmware. Tried with SEUS and PC-Companion and both says that I already have the latest version and gave me no option to force update.
What can I do now?
Paul_BR said:
Now I'm trying to install a ROM, but the requiriments are:
Root and CWM Recovery already installed
Latest 2.1.1.A.0.6 SE firmware due to kernel dependencies.
My firmware version is 2.0.A.0.504 so I tried it below:
Force-update to 2.1.1.A.0.6
Grab this build.prop file and copy it to your sdcard
Using Root explorer, backup your /system/build.prop file and copy the grabbed build.prop file to /system/build.prop
Reboot twice and try to re-update your firware. You might need to force-update if SEUS or PC-Companion says you already have the latest firware.
Once the update completes, check again your firmware version.
Unfortunately, after I did it above, still can't update the firmware. Tried with SEUS and PC-Companion and both says that I already have the latest version and gave me no option to force update.
What can I do now?
Click to expand...
Click to collapse
Just install newest software via Seus, even if it says you have newest software (NOTE: I'm not absolutely sure if this works, only whenever I reflashed via Seus, I always had newest firmware on my phone).
Please press thanks if I helped .
Sent from my U20i using xda app-developers app
Kilroy. said:
Just install newest software via Seus, even if it says you have newest software (NOTE: I'm not absolutely sure if this works, only whenever I reflashed via Seus, I always had newest firmware on my phone).
Please press thanks if I helped .
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
Yes that's right . You just need to install via SEUS even if it says that you already have latest version bla bla bla it doesn't matter just install anyway. The rest is just root phone and instal cwm ( for me i used unlockroot to root the phone, it never fails ), then just flash the kernel you want by flashtool and you're ready to go, the rest is just flash your roms and stuff xD.
Hi everybody please help me with my ST18i
Tp wont boot stuck in sony logo.I read all posts and treads on this forum
what im do
1. Unlock boot oficialy
2.Flash CWM with flasboot
3.Flash Cyanigenmod with CWM "install from zip"
Tp bootup but dont work touch then in this forum i find post about if bootloader no st 18i touch will not work
in flashtool my phone see like R800i how can i change that on my ST18i ?
and i try reflash to other kernel like ctckernel boot_9_587c-d-e.img.
freexperia work on cyagenmod but in other custom firmware not work.
im flash with SEUS not work
Flash with Flashtool not work
in general i don have idea anymore how can repair please help
for me strange cyanugenmod 9-7 stable not properly work on my phone image on display jumping from left to right and touch don work
my tp came to me in this problem if be any solutions please help
how can repair my tp. Thanks
ps: i m from Kz my eng bad sorry. I can understand but cant explain normaly against sorry
Hello!
Remember this: You CAN'T use stock kernel with Cyanogenmod. You need to flash the kernel included inside the zip you downloaded.
And as far as I know, there is no CTC kernel for Xperia Mini or Xperia MDPI.
Since you already said that you unlocked the bootloader of your phone, try reflashing stock ICS firmware of Xperia Mini using Flashtool. Then if you want to install the ICS Cyanogenmod, download the zip file for your phone. After downloading the zip, flash the kernel that can be found inside the zip. That kernel has already a CWM installed so no need to install CWM manually. After flashing the kernel, install now the Cyanogenmod zip.
Sent from my SK17i using xda app-developers app
St18i
arjunbalagtasand02 said:
Hello!
Remember this: You CAN'T use stock kernel with Cyanogenmod. You need to flash the kernel included inside the zip you downloaded.
And as far as I know, there is no CTC kernel for Xperia Mini or Xperia MDPI.
Since you already said that you unlocked the bootloader of your phone, try reflashing stock ICS firmware of Xperia Mini using Flashtool. Then if you want to install the ICS Cyanogenmod, download the zip file for your phone. After downloading the zip, flash the kernel that can be found inside the zip. That kernel has already a CWM installed so no need to install CWM manually. After flashing the kernel, install now the Cyanogenmod zip.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
i do like you say
1) flash stock (wont boot)
2) unlock bootloader
3) flash kernel in Cyagenmod.zip
4)Enter recovery and install ICS Cyagenmod.zip
5) TP bootup but toch not work
why stock firmware wont boot?
can i change bootloader in TP because in Flashtool tp is defined R800i but must be ST18i
thx for help
Dizmiss said:
i do like you say
1) flash stock (wont boot)
2) unlock bootloader
3) flash kernel in Cyagenmod.zip
4)Enter recovery and install ICS Cyagenmod.zip
5) TP bootup but toch not work
why stock firmware wont boot?
can i change bootloader in TP because in Flashtool tp is defined R800i but must be ST18i
thx for help
Click to expand...
Click to collapse
did u mess up ur phone in previous?!?! it looks like.
1. unlock bootloader is only once. it will STAY unlocked no matter what u do. so dont do it again
2.before installing a custom rom like CM, flashing a stock.ftf is good idea like u do, BUT:
a) make sure its the latest version of flashtool
b) install the drivers in the drivers folder of flashtool.
c) may install android SDK to get the google usb drivers (dont install ALL!!! just leave all like it is & install)
2.1 SO NOW if u flash a stock.ftf fw for YOUR phone, IT WILL BOOT 100%. ELSE:
a) u doing sth wrong (wrong fw etc)
b) ur phone is broken , a stock ics ftf will boot 100%, remember.
after this install cm like u say (kernel flash 1st than rom.--> boot)
st18i
bejunk said:
did u mess up ur phone in previous?!?! it looks like.
1. unlock bootloader is only once. it will STAY unlocked no matter what u do. so dont do it again
2.before installing a custom rom like CM, flashing a stock.ftf is good idea like u do, BUT:
a) make sure its the latest version of flashtool
b) install the drivers in the drivers folder of flashtool.
c) may install android SDK to get the google usb drivers (dont install ALL!!! just leave all like it is & install)
2.1 SO NOW if u flash a stock.ftf fw for YOUR phone, IT WILL BOOT 100%. ELSE:
a) u doing sth wrong (wrong fw etc)
b) ur phone is broken , a stock ics ftf will boot 100%, remember.
after this install cm like u say (kernel flash 1st than rom.--> boot)
Click to expand...
Click to collapse
Ok i will try like you say thanks for help ..if tp bootup i will write
regards