I just got back from Dubai this morning, and I recieved my first call from the plane. Fine, it worked.... but then...
disaster struck!
The phone has the "no signal" message when I click on the reception icon. I've tried to click the "turn phone off" button but nothing works...
I can't get into the phone settings in the start menu to change networks...
I'm trying to back-up to SD to do a hard reset, but the phone re-boots itself every 4 minutes! The device is also very slow in responding to the commands. E.G. when I place my phone code it takes 3 seconds just to type in the number... strange! I have 48 / 64 MB free in memory and a 256 MB SD card...
I can't connect to activesync because the decive is not being recognized.
I took out the sim card and am using a crappy nokia until I get this deal fixed.
I searched the forum for possible solutions and some came close, but none popped the cherry...
Have any of you experienced this specific situation? Is there anything I can do to recover my data before hard-reseting the Qtek? I made about 30 new contacts on the recent trip and was going to sync when I got home from the airport... but the 1010 keeps passing out on me!! It's like giving a date a full bottle of Crystal Champange before hitting the bedroom... Sucks!
HELP!
Have you tried a soft reset without the sim or sd card in the xda?
From My experience, I faced this situation (very slow response) once when I selected "Calib/Debug" option by mistake from the GSM menu in the bootloader. The only solution was to do select "Reset" from the same menu but more than once. Hope that will work with you.
PS: if you didn't go to the GSM menu, forget what I said ... your problem might have another cause.
Re: Qtek Keeps rebooting itself, without switching phone off
Mad-Jam said:
disaster struck!
Click to expand...
Click to collapse
It's a long shot, but this could be dirty SIM or SIM contacts.
Dear All,
I was using 4.0.0.3. During my air travel i used to switch on the flight mode and it after landing i used to turn it off. It used to work properly.
But now after every time i land my phone refuses to detect a network. So i have to take out my sim. put it inside a 3310 or any other phone where it start working. After that when i put the sim card back in to my neo it starts working fine.
Is there something wrong i m doing.
regards,
vinit
Does the phone turn on when you deactivate flight mode? Do you have to remove the sim or does a soft reset suffice? Try to clean the card, I had similar problems. Try to reactivate the phone not by using the comm manager, but the wireless manager (tap on the connection icon in the top bar).
i had similar problem but it finished after uninstalling htc xbutton . or not installing it at all .use gullum's IX rom its without xbutton.
I do not use HTC xButton. It is not installed on my phone.
I used all methods suggested by the infestor. Tried cleaning the card many times. The phone turns on when i deactivate flight mode. Even tried doing this using the buttong on the tray as suggested by infestor.
I have to physically remove the sim card. This is turning quite a bit of a problem. Tried to take it to my phone operator. In front of them it suddenly started working fine.
Should i add that mine is an old sim card. i think a 16k sim card. it was issued in 2000. Can tha be a reason?
Regards,
Vinit.
I had problems on my prophet loggin into network because I had manual network selection. Somehow it didn't connect to chosen network from time to time, so I turned it to automatic and everything is fine since then. Maybe this will help ?
settings/phone/network -> network selection (under WM6 and WM5 i think)
alien6 said:
I had problems on my prophet loggin into network because I had manual network selection. Somehow it didn't connect to chosen network from time to time, so I turned it to automatic and everything is fine since then. Maybe this will help ?
settings/phone/network -> network selection (under WM6 and WM5 i think)
Click to expand...
Click to collapse
Tried this as well. The only solution which i have right now is to switch off my phone when i m flying..and switching it on again...
the only solution is to press green button (call button) after you switch off flight mode and it will work.
Hi,
School just started today and we have wireless at school, so i tried to connect to the wifi with credentials and so forth.
I have Proven Rom 1.08 and all the other reg stuff on it. Did nothing wrong at all, but soon after trying to connect to the wireless network, the phone restarted and now its in a continuous loop of restarting. It doesnt stop, I have soft resetted the phone multiple times. I dont want to hard reset it right now since I havent backed up anything. Please help me. I dont know what else to do. I have also removed the battery and put it back after a few mins to push me luck.
P.s. When the phone starts, the first screen, The ATT world phone screen comes on, the phone vibrates, and then a blank screen, and the phone restarts.
Well,
I went with the hard reset, removed my mem card and sim. The phone seems to work as before, but I hope I havent stumbled upon an issue that could appear again.
Lost 10+ hours worth of customization
You could check to connect the phone on the pc \; activesync or wmdc
Rooted the phone then applied the OTA update and since then i keep getting a wifi error. Im currently out of the country so can't connect to sprint. Any ideas?
Anyone?
Sent from my GT-P7510 using Tapatalk
Yup, had this problem after applying this OTA.
When I click the checkbox to enable wifi, it just shows "error" and does not enable wifi.
A factory reset fixed it for me.
My wifi turns on and connect but won't give me any data
Sent from my MB855 using Tapatalk
The Atrix has a driver related issue that causes problems connecting to WiFi access points in certain countries. I'm pretty sure they have figured out a workaround over in the Atrix XDA section, sorry I don't have a link for you.
Hi,
My name is Fisher, I have the same problem, I have the phone in Australia and I updated over wifi then my wifi just says error underneath it, also 4G does not work. I can turn wifi on by first putting the phone into aeroplane mode then restarting and turning wifi on while still in aeroplane mode. I have managed to get all working occasionally by having aeroplane mode and wifi on, then going to system updates which are greyed out then turning off aeroplane mode by holding down the power button and when ive done that i have a second or so before the wifi dies to click motorola software update that is now not greyed and it sometimes kicks everything on;-)
I have tried factory resetting the phone 3 times and formatting internal sd on third time, did nothing.
Now i have some dmesg logs with the wifi under error, working in aeroplane mode and all working with my trick, so let me knowif u want them all.
I have a feeling the issue could be a sprint app or process that disables it, look at the access/security settings for sprint zone, it can control wifi, everything seems to be briefley activated when i start the phone in the notification bar then wifi and 4g die, so maybe a sprint process detects that the phone has not activated or something and kills wifi and 4g.
I have reported this on the motorola forum in the thread someone else started, look for " motorola photon wifi error" in google and it might be the first hit.
Fisher
fisher.grubb said:
Hi,
My name is Fisher, I have the same problem, I have the phone in Australia and I updated over wifi then my wifi just says error underneath it, also 4G does not work. I can turn wifi on by first putting the phone into aeroplane mode then restarting and turning wifi on while still in aeroplane mode. I have managed to get all working occasionally by having aeroplane mode and wifi on, then going to system updates which are greyed out then turning off aeroplane mode by holding down the power button and when ive done that i have a second or so before the wifi dies to click motorola software update that is now not greyed and it sometimes kicks everything on;-)
I have tried factory resetting the phone 3 times and formatting internal sd on third time, did nothing.
Now i have some dmesg logs with the wifi under error, working in aeroplane mode and all working with my trick, so let me knowif u want them all.
I have a feeling the issue could be a sprint app or process that disables it, look at the access/security settings for sprint zone, it can control wifi, everything seems to be briefley activated when i start the phone in the notification bar then wifi and 4g die, so maybe a sprint process detects that the phone has not activated or something and kills wifi and 4g.
I have reported this on the motorola forum in the thread someone else started, look for " motorola photon wifi error" in google and it might be the first hit.
Fisher
Click to expand...
Click to collapse
Sounds good. Ill give that a shot. Lemme know if you find out more
Mine is working fine, though today I turn WIFI off and my battery had a run away effect. The battery drained 30% in 10 min and the phone was at 116 degrees. It also rebooted itself twice but now it is fine and I turned wifi on and off a few times and no ill effect.
and yep I have the update.
Wifi ERROR after OTA update
hello everyone
i am not a US resident and i bought this amazing phone i am using Cellcom Israel Sim card
i just saw the firmware update,the update run smooth but after the reboot i try'd to turn Wifi on
and getting an ERROR.
try'd to reboot the phone - wifi not working
try'd to pull out the battery and restart - wifi not working
the only thing that works is when i restart the phone in AIRPLANE MODE the wifi works
but soon as i turn the AIRPLANE MODE off the wifi disconnected and cannot turn
it on again until turn back the AIRPLANE MODE again.
i do not using any data plan connection i dont have any...
what can i do??
Just do a factory reset. That will solve this problem.
Its a known problem. Lot of people are facing it after applying OTA. Just do factory reset and you should be fine.
Wifi ERROR after OTA update
hope you right...some pp'l that done this method complains that it didnt work
ohh shoot lets try!
its no go gives me an error when i need to activate the account via wifi.
this sux
Funkym0nkey said:
Just do a factory reset. That will solve this problem.
Its a known problem. Lot of people are facing it after applying OTA. Just do factory reset and you should be fine.
Click to expand...
Click to collapse
Factory reset doesnt do a thing bro
Hi, I had the same issue actually watch the router and say the wifi connect and then drop, i installed wifi manager and then for some reason it started working and i haven't had a issue since.
no sure why it did this but i also restarted the phone multiple times trying to get it syncing and it wouldn't until that program was installed then after i got connected i uninstalled the app and it still connects without the app
got installed "wifi manager" and again error "error enabling wifi"
Factory resetting does nothing for me, I even formatted the internal memory as well on the third time, the only way so far I have managed to turn wifi and 4g back on and also data as data seems disabled is by:
Enable aeroplane mode, restart and then enable wifi, then go to system updates and you will see the 3 options greyed out, disable aeroplane mode by holding down the power button then click on update motorola software and most of the time that has worked for me.
kc_sheets mentioned installing wifi manager, I have installed it but not restarted my phone as I've managed to get it all temporarily working and Ill test the wifi manager when I have to restart.
Let me know if anyone else can get them all working using my method.
For troubleshooting, I know dmesg is good and probably lsmod, what other linux info can help me find out what the issue it, I would not be surprised if sprint has done something to disable wifi, 4g and data as the phone starts up, but it looks like it only disables at the last minute, does anyones wifi connect as you start the phone up, I think mine may have done.
I'm hoping we can just rename the process or app that is the issue and have a non crippled phone what we paid good money for.
Fisher
just flashed the phone and guess what??
wifi working again!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! w000ttttttttttttttttt
----------------------
after reboot the wifi error starts again.
that means no luck
I'm also out of the States and I just started having wifi issues today. It would see the SSID, try to obtain IP, then fail. I just set a static IP, default gateway, etc... and that did the trick.
jomare711 said:
I'm also out of the States and I just started having wifi issues today. It would see the SSID, try to obtain IP, then fail. I just set a static IP, default gateway, etc... and that did the trick.
Click to expand...
Click to collapse
you dont have wifi problems,its your router problem
my problems are with the wifi connection its not even trying to connect or activated its getting an error when i press the wifi button.
Posted on motorolla forum:
Hey guys, same problem - briefly:
Sprint customer - overseas for the next 6 months,
1. OTA update successful, achieved over wifi
2. phone restarted, wifi connectivity lost "error" as with fisher and the rest
3. airplane mode allows wifi connection until GSM is connected again, at which point it gets knocked off
4. I /also/ fat fingered my phone during one of the restarts and had both wifi and GSM working, but it's my nature to test things, so i restarted and of course now it's gone.
5. I am not able to attempt wally's re-register with Sprint approach as I will be away from the states untill January
6. I tried the update sprint zone fix - no luck
7. I tried the disable roaming guards - same as fisher, some of them are green and grayed out, no luck
Thank you !
Hi there,
I have this Android chinese phone which was given to me as a present, no manual.
My problem is that the phone has two SIM slots and after I turn the device on, it boots and tells me that 1 SIM is missing. What happens after that is that it recognizes the SIM card in the other slot and connects to my mobile provider but the connection lasts couple of minutes and than I have no signal for a while. After some time, the connection to my mobile provider works again, but after another couple of minutes, there is no signal again.
I presume that the phone wants to switch to the other SIM which is not there.
How can I turn off this switching from one to another SIM?
Or do you have any other idea what could be causing this (regular) disconnection.
Does anybody know how to enter in boot mode (or any other mode where I could influence this switching between the cards.
The phone does not have any installed app which I could use to influence this SIM-switching.
Thanks for any help/advice
Pavana