[Q] Verizon Galaxy Tab LTE 10.1 Dead - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi there.. well, after trying to make my tab come back to life, I think I finally destroyed it. Can't get to Recovery mode (Blank screen) and Download mode does not connect anymore to the computer... it also goes to blank and then restarts the tablet itself when I hit the "Volume up" button.
If I hit the Power+volume down, it goes to this message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So... am I dead??

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Guys really no one has any idea?
Just wondering if I am the only one with a dead tablet

vectorcharlie said:
Just wondering if I am the only one with a dead tablet
Click to expand...
Click to collapse
Mines not dead and I can get to download with Power+VolulmeUP, but I can't get to recovery mode.
After selecting Android+Box, screen goes blank then Tab shuts down instead of recovery mode.
This was after trying to root using youtube video. Everything went fine until the last reboot into recovery. Now no recovery mode.

If you can get into download mode try and flash the stock kernel and Rom back through odin
Also have you tried recovery mode with kies, A dead tab is not useful =/

Danisflying said:
A dead tab is not useful =/
Click to expand...
Click to collapse
It CAN be... paperweight, coaster, frisbee, mirror... the list goes on...

Danisflying said:
If you can get into download mode try and flash the stock kernel and Rom back through odin
Also have you tried recovery mode with kies, A dead tab is not useful =/
Click to expand...
Click to collapse
No I haven't tried Kies for that, I didn't know you could! I'll read the Kies help file to learn what to do.
I did use odin to start the rooting and couldn't finish because it wouldn't go into recovery mode for the final step. I'm a real noob, so when you say flash the stock kernel, do you mean get a stock kernel to flash with odin?
Mine is a 4g lte. Thanks!

Danisflying said:
If you can get into download mode try and flash the stock kernel and Rom back through odin
Also have you tried recovery mode with kies, A dead tab is not useful =/
Click to expand...
Click to collapse
The problem is that ODIN or Windows7 for that matter does not recognize the tablet... the only way to recognize the tables is through APX.

Have anybody solved this problem. My galaxy tab LTE 4G has bricked after i up a wrong rom. I cannot turn it on, nothing happen when i push power button

olddullguy said:
No I haven't tried Kies for that, I didn't know you could! I'll read the Kies help file to learn what to do.
I did use odin to start the rooting and couldn't finish because it wouldn't go into recovery mode for the final step. I'm a real noob, so when you say flash the stock kernel, do you mean get a stock kernel to flash with odin?
Mine is a 4g lte. Thanks!
Click to expand...
Click to collapse
on post #15 in this link,you will get a stock recovery for tab 4g lte
http://forum.xda-developers.com/showthread.php?p=16804945#post16804945
or you can try flash everything back to stock in this link
http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/
Sent from my SCH-I905 using XDA App

Related

[Q] Vibrant keeps rebooting, wont go into Recovery mode

Hey guys,
I installed one of Eugene's kernels for froyo (I believe a13) and then I installed MacNut R12. My phone froze on the Vibrant screen and I had to hold down power button until my vibrant turned off. Now it keeps rebooting and rebooting. It shows the Vibrant screen logo, then the Galaxy S i9000 screen logo and turns off and keeps repeating the process. I've tried to get into recovery mode and I've had no luck. I've also done battery pull.
I also tried odin, but I don't see how Odin can restore it since I can't even get into recovery mode (download mode).
Would really appreciate some feedback. Thanks.
I have the same problem please someone help!
Try the link in my signature! It will help you use ODIN to restore to stock FW.
And that should solve the problem.
Odin back to stock
Sent from my SGH-T959 using XDA App
Kickstar13 said:
I also tried odin, but I don't see how Odin can restore it since I can't even get into recovery mode (download mode).
Click to expand...
Click to collapse
Recovery Mode DOES NOT EQUAL Download Mode!
ODIN will work, follow the link in the signature of post #3 here.
You may also want to visit this thread...
http://forum.xda-developers.com/showthread.php?t=849028
Thanks used Odin to get into download mode! All restored!!

[Q] How to unbrick samsung galaxy s2

Having recently installed a miui rom, i found that my phone has become brocked. I can go to dwonload mode, and I can turn it on but there is only a blank screen. Does anyone know how to unbrick it?
Thanks
go into download mode open up ODIN and flash a stock ROM. Simple as that.
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
nikkox988 said:
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
He said he can access Download mode which means he can flash a stock ROM and all will be good.
I can't seem to go into recovery mode
thealmightysaj said:
I can't seem to go into recovery mode
Click to expand...
Click to collapse
to get recovery get into download mode open Odin and flash CF-Root Kernel and then try to get into download mode that way.
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
thealmightysaj said:
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
Click to expand...
Click to collapse
are you flashing it through PDA? Just checking I didnt on accident once. Also try just flashing a stock ROM.
http://forum.xda-developers.com/showthread.php?t=1224423
onli flashing pda wont work i thinkk... you may need to repartition
go to http://androidflip.com/android-2-3-4-gingerbread-xxkg3-firmware-update-for-samsung-galaxy-s2/
flash it by repartitioning
download the package in it. it worked for me
Where can I find the stock ROM for a Bell Samsung GS2?
try samfirmware.com
they have all of the official released firmwares based on geographical region.
or
http://forum.xda-developers.com/showthread.php?t=1075278
I have unbricked my phone but i can't access the android market, everytime time i open up the app it closes
my t-mobile galaxy s2 is dead after ICS upgrade failed
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
If you can't get into download mode (home/power/volume down), only thing you can try before you send it back to Samsung or get it JTAG repaired is a jig, which unfortunately is unlikely to work. Still worth a try tho.
hbarri said:
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
Click to expand...
Click to collapse
Try uploading a stock kernel first, then try uploading the rom
Do we have to have a jig?
Help me fix my fully bricked i9100
I have flashed the wrong Roms and firmwares in my Samsung galaxy s2 i9100 for several times now my phone doesnt go to the recovery mode. It only goes to the download mode but re flashing the correct new roms and firmwares, nothing actually works! I tried those
Odin shows only FAIL !! when I flash new roms..I ve tried so many roms so far but it only fails
what do I do now??
Try http://sammobile.com for the firmware.
Sent from my GT-I9100 using Tapatalk 2
Samsung Galaxy S2 SPH-D710
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
XraidedX2 said:
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your sock rom again using samfirmware.com
6.Done

Help please

Hi Folks,
I flashed Foxhound 1.4.1 earlier and tried to flash CF-Root-SGS3-v6.4.tar with Mobile Odin so I could use ClockWorkMod to its full extent, but the phone is now stuck in a bootloop - the Mobile Odin logo appears then it quickly reboots.
I've tried removing the battery and starting in Recovery mode and Download mode, but the Mobile Odin flashing logo comes on no matter what I try.
I've even tried connecting the phone to my PC and running Odin, but it doesn't recognise the phone
Any help would be greatly appreciated.
Thanks in advance,
Robbie
floydart said:
Hi Folks,
I flashed Foxhound 1.4.1 earlier and tried to flash CF-Root-SGS3-v6.4.tar with Mobile Odin so I could use ClockWorkMod to its full extent, but the phone is now stuck in a bootloop - the Mobile Odin logo appears then it quickly reboots.
I've tried removing the battery and starting in Recovery mode and Download mode, but the Mobile Odin flashing logo comes on no matter what I try.
I've even tried connecting the phone to my PC and running Odin, but it doesn't recognise the phone
Any help would be greatly appreciated.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
I would pull the battery, wait 30 seconds and reinsert the battery, go in downloadmode if possible and flash a stock rom with Odin. Than reroot with CF Root. If not possible try a jig to get in downloadmode. Good luck :fingers-crossed:
Enter into recovery mode , run wipe data , factory reset , reboot. mobile odin logo should disappear. Enters into download mode, flash new firmware stock samsung. http://www.sammobile.com/firmware/
gee2012 said:
I would pull the battery, wait 30 seconds and reinsert the battery, go in downloadmode if possible and flash a stock rom with Odin. Than reroot with CF Root. If not possible try a jig to get in downloadmode. Good luck :fingers-crossed:
Click to expand...
Click to collapse
Thank you
I've just been told that dinner's ready, so will leave the battery out until after that.
If I need to buy a jig, can you please recommend the best place to pick one up?
floydart said:
Thank you
I've just been told that dinner's ready, so will leave the battery out until after that.
If I need to buy a jig, can you please recommend the best place to pick one up?
Click to expand...
Click to collapse
Look on ebay or something like that. They are for sale there.
gee2012 said:
Look on ebay or something like that. They are for sale there.
Click to expand...
Click to collapse
I managed to get into Download mode and reflashed CF-Root with Odin.
Thanks for the advice

[Q]Help! Verizon i905 will not boot up.

I know there has been other treads about this before but none of the suggestions seemed to work for me. I searched and searched and I'm just not finding a fix. I hate to do these posts when an easy answer is right there but I just can't figure it out and it's killing me. So here it is:
I just got this Verizon Galaxy Tab that would not come on - only showed the battery charging icon. I just charged it over night and it came on once. However, processes kept shutting down. For instance, when I went into settings and tried to connect to my wifi network, the whole process would just close down. So I let it get to about 40% and reboot it to download mode (there was no recovery). I found the correct .tar file for it and flashed it with ODIN3 v1.85. It completed successfully but now it won't boot past the Samsung splash screen. Once the splash screen comes up, it will just go back to the large battery charging icon in the middle of the screen.
Then I tried the other option where you get into recovery and nothing happens at all. The screen is backlit black (you can just see light around the edges of the screen) and nothing ever happens.
So now, it's just charging but it seems to charge very slowly. I was wondering if this is a battery issue or some strange sequence that needs to be done. It seems to be at about 40% again. Any other suggestions would be appreciated.
These are other things I've tried:
hold the power button down for 30 seconds
Hold the power button down while touching the screen
More suggestions would be appreciated.
Now the tablet is fully charged but it still gets stuck on the splash screen when trying to boot up. Still have no recovery. Also, I'm not able to find a PIT file to re-partition. Can someone tell me how to get the stock recovery back at least? I've been looking but I can't find a file to flash for the recovery.
Same problem
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
DermagraFX said:
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
Click to expand...
Click to collapse
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
no I haven't tried flashing through CWM, as I wasn't trying to flash originally, I was just rooting and going easy on it, then it wouldn't boot, so I wasn't prepared and now can't add files to my SD drive.
I didn't unlock the boot, as none of the instructions I read mentioned it (rooting was all I was trying to do).
I don't even have a stock recovery either, all I have is CWM and TWRP.
I'm going to try mounting it in Linux and see if that makes any difference to put roms on my SD drive, as windows doesn't like it anymore, except through Odin, where luckily it seems to work fine... For now.. lol
Fixed!!!
shawndh said:
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
Click to expand...
Click to collapse
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
DermagraFX said:
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
Click to expand...
Click to collapse
I'm glad you got the right firmware and fixed your tab! But this site does not list a firmware for the SCH–i905 anywhere. Unless the Verizon Galaxy tab has an alternate model# there is no firmware on the site for my device. Oh well, at least one of us got tablets fixed. Congrats!
Download mode issue.
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
younggunner said:
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
Click to expand...
Click to collapse
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
I don't get it. First, you can't flash a kernel using Odin. Second, your tab won't even be able to boot without the kernel.
Sent from my GT-P7500 using Tapatalk HD
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
update
DermagraFX said:
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
Click to expand...
Click to collapse
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
Click to expand...
Click to collapse
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
Click to expand...
Click to collapse
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
If you DO HAVE a stock rom, maybe you could pass it along, i believe shawndh who started this thread is in need of one for the same tablet.
confusion fixed
DermagraFX said:
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
Click to expand...
Click to collapse
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
DermagraFX said:
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
Click to expand...
Click to collapse
i even went as far as getting a brand new cable to see if it was my cable still same thing. No response in download mode for either pc's ive tried.
little stumped....
possible clues: when tablet boots up, it boots up to a bright black screen, only once it completely boots up am i able to see my display properly.
DermagraFX said:
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
Click to expand...
Click to collapse
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking for another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Are you connecting to a USB port that is on the motherboard of your computer? Mine will only recognize my tablet with one port. The other ports are not recognized at all by ODIN.
shawndh said:
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
Click to expand...
Click to collapse
I don't think its a cluster issue, just a bad flash previously. But you'll see from the link, yours is also known as the P4vzw. Well check the link and make sure that's your tab that I found. Then have a look at ALL the files for that tab.
Have you seen/tried this one... here's the thread STOCK ROM FOR YOUR TAB...
forum.xda-developers.com/showthread.php?t=1342995
Here's just the file.
http://goo.gl/XPMXv
Try flashing CWM recovery to your tab, and try a file from cyanogenmod
http://wiki.cyanogenmod.org/w/P4vzw_Info
Or just try the CM ROM first maybe and see what happens. I don't remember what you have for recovery. There are a bunch on there, but all nightly that I saw, but even that would be better than nothing for now if it works.
I'm still looking, but I know what you're saying about few and far between. I think they all are for the tabs. Let you know if I find anything else.
Another mod ROM. http://www.teamandroid.com/2012/08/...tab-101-sch-i905-android-411-aosp-jelly-bean/

please help :( issues over 6 months now

Currently bought a sch-i905 4g lte verizon galaxy tablet.
Boots normally, and functions.
Last night i was writing a bootloader through odin, and accidently had auto reboot checked. I was unable to write the modem/kernel that goes with it and now have a galaxy tablet that boots into the OS just fine.
The problem now is though that i can not get my tablet/computer to communicate in download mode it says "waiting for cable"
as well as my recovery is a black screen of doom.
Through rom manager when boot the tablet up i can see that clock work is installed just not boot properly..
I need some help here guys since this is outside my knowledge of fixing.
i can boot into the android OS, but when i charge it while its on it wont actually charge, the X is over the battery, but if i leave it off i can charge it just fine.
younggunner said:
Currently bought a sch-i905 4g lte verizon galaxy tablet.
Boots normally, and functions.
Last night i was writing a bootloader through odin, and accidently had auto reboot checked. I was unable to write the modem/kernel that goes with it and now have a galaxy tablet that boots into the OS just fine.
The problem now is though that i can not get my tablet/computer to communicate in download mode it says "waiting for cable"
as well as my recovery is a black screen of doom.
Through rom manager when boot the tablet up i can see that clock work is installed just not boot properly..
I need some help here guys since this is outside my knowledge of fixing.
i can boot into the android OS, but when i charge it while its on it wont actually charge, the X is over the battery, but if i leave it off i can charge it just fine.
Click to expand...
Click to collapse
Just try to Flash stock firmware of your region again.
This may fix your problem...as m nt sure jst give it a shot.!!
additional problem
ando dev said:
Just try to Flash stock firmware of your region again.
This may fix your problem...as m nt sure jst give it a shot.!!
Click to expand...
Click to collapse
unfortunately when i use download mode, it only shows "waiting for cable" no matter what pc, what driver, and what cable i use.
If i boot into normal android, the drivers load fine, i can transfer files etc . just cant recognize it in download mode.
so without recognition from download mode,
a blanked/blacked out recovery mode
im not sure how to fix it.
younggunner said:
unfortunately when i use download mode, it only shows "waiting for cable" no matter what pc, what driver, and what cable i use.
If i boot into normal android, the drivers load fine, i can transfer files etc . just cant recognize it in download mode.
so without recognition from download mode,
a blanked/blacked out recovery mode
im not sure how to fix it.
Click to expand...
Click to collapse
IS your tab rooted...if yes then Try flashing stock firmware usin Mobile odin pro...
Hope this helps!!!
additional problem
ando dev said:
IS your tab rooted...if yes then Try flashing stock firmware usin Mobile odin pro...
Hope this helps!!!
Click to expand...
Click to collapse
I was originally rooted, but no longer am as i made the errors in the process of returning to stock.
I have super user, but the binary isnt there so i know im not rooted anymore.
that was another option i tried as well.
exactly what are you are trying to do where it says "waiting for cable"????
and you may also got to ty hard reset for your device!!!
additional problem
Im attempting to use download mode to restore my tablet to stock, fix download mode, and fix recovery. and also fix my charging issue while the tablet is turned on.
download mode just wont recognize anything. simply says "waiting for cable"
younggunner said:
Im attempting to use download mode to restore my tablet to stock, fix download mode, and fix recovery. and also fix my charging issue while the tablet is turned on.
download mode just wont recognize anything. simply says "waiting for cable"
Click to expand...
Click to collapse
Try hard reset for your device!!
additional problem
ando dev said:
Try hard reset for your device!!
Click to expand...
Click to collapse
its under my impression that hard reset will not fix download mode or recovery mode.
well, i did a factory reset, and now my tablet just goes to the samsung tablet 10.1 and still boots up with an ALL BLACK screen.
once its completely turned on, I can hit the power button to dim it, then i hit the power button and all is well im back to android os.
now you've fixed my battery charging issue while my tablet is on, so i am forever grateful.
Next 2 things to fix:
Download Mode & Recovery
thoughts?
younggunner said:
its under my impression that hard reset will not fix download mode or recovery mode.
well, i did a factory reset, and now my tablet just goes to the samsung tablet 10.1 and still boots up with an ALL BLACK screen.
once its completely turned on, I can hit the power button to dim it, then i hit the power button and all is well im back to android os.
now you've fixed my battery charging issue while my tablet is on, so i am forever grateful.
Next 2 things to fix:
Download Mode & Recovery
thoughts?
Click to expand...
Click to collapse
My Thanks metre does not have your thnxx yet ...duh
And your this problem will also be fixed shortly i guess....fingers crossed:fingers-crossed:
KEEP ME POSTED
BTW WHAT ANDROID OS YOUR DEVICE HAS???
additional problem
ando dev said:
My Thanks metre does not have your thnxx yet ...duh
And your this problem will also be fixed shortly i guess....fingers crossed:fingers-crossed:
KEEP ME POSTED
BTW WHAT ANDROID OS YOUR DEVICE HAS???
Click to expand...
Click to collapse
so reset fixed my battery charging issue
but download mode does not recognize on any pc i try it on still
and if i boot into recovery its just a completely blank lit screen.
additional problem
younggunner said:
so reset fixed my battery charging issue
but download mode does not recognize on any pc i try it on still
and if i boot into recovery its just a completely blank lit screen.
Click to expand...
Click to collapse
device is running 4.0.4
younggunner said:
device is running 4.0.4
Click to expand...
Click to collapse
You would Consider using tha framaroot app....if ur luck runs you may be able to root your device..
GIVE IT A SHOT ANDKEEP ME POSTED!!!!!!!
additional problem
ando dev said:
You would Consider using tha framaroot app....if ur luck runs you may be able to root your device..
GIVE IT A SHOT ANDKEEP ME POSTED!!!!!!!
Click to expand...
Click to collapse
framaroot stated i was unable to use the exploit.
younggunner said:
framaroot stated i was unable to use the exploit.
Click to expand...
Click to collapse
ok no luck....Dnt worry i ll luk to your problem...!!!!:good:

Categories

Resources