Ok here's what happened...
I had Viper 1.3 running ok.... so I decide to give chainfire3d a try.. and install the nvidia drivers 1st...
It didn't make splinter cell work so I decided I'd uinstall it... after I put the original drivers back....
I installed the qualcom driver thinking that was it... Then I uinstalled chainfire3d.
Now when I boot my phone its totally black.
I think I can fix this if someone guides me through the recovery or guides me through wiping & re-installing viper.
Method 2 would be alot quicker, but worst case scenario,
I still have a nand backup but its on my computer.. So I'd need to boot into recovery.
And then access the sd card.. & then navigate to load it.
Great news I'm access the sd card right now and puttin the nand image back.
The only thing now is when I boot into recovery if I even make it that far, all I see is a black screen. No flash, the keys don't light up, & the power led blinks red once.
....
30 minutes later... I can boot into recovery but I can't see. Using a youtube video I mounted the sd card & have the viper rom ready to restore after I wipe it.
But I need directions on which keys to hit & the number of times.
I have just clicked wipe & something... the 3rd selection then I hit enter... Plz help
Try putting the PC86IMG.zip for TWRP back on the root of your sdcard and reflash that in the bootloader. If that all goes well, you should have a working recovery. Let me know how it goes, I'm going to bed soon so if I don't answer, I will check this thread in the morning. Best of luck!!
Can you give me the next instructions on which buttons to hit..
How many times do I hit volume down to accept yes I want to wipe it?
Or if I need to restart and choose another option.... because I already selected wipe & hit power.
Krairo said:
Can you give me the next instructions on which buttons to hit..
How many times do I hit volume down to accept yes I want to wipe it?
Or if I need to restart and choose another option.... because I already selected wipe & hit power.
Click to expand...
Click to collapse
How do you know that it's actually doing anything? Seriously, try what I suggested and flash TWRP from the bootloader, I have a feeling that will fix it for you. If not, you can also do the factory reset from the bootloader.
already tried factory reset... & can you navigate me to flash
All I have to go on is this youtube video http://www.youtube.com/watch?v=GmQswv3vKrU
I already restarted my phone into the boot menu
Its not working -_-
.. I went to sleep and its working now
Related
Hi all,
Once again, I've hit a wall with my phone. I apologize ahead of time for the length of this post, but i want to be very clear about what happened so I can get it resolved as soon as possible. Also, I have searched for hours to find an answer to this problem, but I've failed to find anything that helps.
Earlier this week I was running Bionix Fusion 1.1 but with all the buzz on the forums about the new 2.2 ROMs I decided to try one. I downloaded Axura 2.0.5 and backed up everything with Titanium Backup and ROM Manager. I then went through ROM Manager to perform the install. This is were I fear I messed something up. I renamed the .zip file from StockKernelAXURA.zip to update.zip (just like when I installed Bionix). Booted into Clockwork (through ROM Manager) and flashed the zip. Everything looked fine during the install, but I'm stuck at the Vibrant load screen.
I found one solution that uses Odin to reflash back to factory, which I did and everything was great... but then I re-flashed and tried Axura 2.0.5 again using the same method. Now I can't boot up (still stuck on the Vibrant load screen) and I can't enter Download mode. I've tried all kinds of button and usb plug-in sequences. Nothing! Please, I know someone out there is thinking "Noob... this is a simple fix!" I'm hoping that person reads this and can lend a helping hand.
Thanks in advance!
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
It worked! Thank you, thank you, thank you! I knew there had to be a way I was missing! I'm flashing back to stock (again) and I'm going to try flashing Axura again... but seeing as the method I used has failed twice so far, any advise? I love how Team Whiskey provided detailed instructions for flashing Bionix Fusion... so shouldn't the same process work for different ROMs? Regardless, now I have another trick up my sleeve.
Thanks again!
Flash it through clockwork in rom manager choose install from sd then go to where it is in your phone click on it that should send you to clockwork recovery then go to install.zip from sd then navigate to whatever folder its in then go to it, it should install you dont have to change the name
Still flashing , thanks to odin & tw
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
Still flashing , thanks to odin & tw
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
coldflid said:
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
I'm assuming you're stuck at cache Just take out your SD card, the large one. I always odin with my sd card out. It gets past that phase where you can get stuck. That will work, and DO NOT rename the {insert rom name here}.zip file to update.zip, just enter clockwork mod recovery and choose install zip from sd card and find it, BUT you NEED to
1. Wipe cache partition
and
2. Wipe DALVIK cache (in advanced menu)
BEFORE installing a rom.
Click to expand...
Click to collapse
So rather than start new thread I thought id continue on this one saying that I have the same problem only no matter what I do I can not force any mode at all. My phone is currently stuck stating that it is converting data partition to optimize for ext 4.
I really dont know what to do at this point.
I tried the following steps
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
with no results. It doesnt even give my phone enough time to show the charging indicator it just automaticlaly boots.
OK i got it to go into download mode. i just plugged in the cord and held down the volume rocker.
no recovery mode
I have the same problem I can't get into Recovery mode I have an HTC G2, I was installing a new kernel, then the recovery Mode stop working, Got stuck in HTC Logo.
Any idea how to fix the problem or what's my problem??? i'd already try some tips but nothing works....
try using the vibrant toolbox to flash the new rom
willsnews said:
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Camdizzzle said:
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Click to expand...
Click to collapse
You most likely made that backup when voodoo was disabled and now when you restored it, voodoo was enabled. Try booting up in recovery[VOL UP + VOL DOWN + POWER then let go of POWER and keep holding VOL UP + VOL DOWN] and installing a voodoo kernel like overstock.
That may be what happened, but dont know anything about the history of the phone. I have tried over and over to get into recovery mode and it wont go past the Vibrant load screen :/
I am also stuck at the vibrant boot screen.
I was trying to update a rom via CWM on my phone, the phone restarted and is now stuck at the vibrant screen.
I have had trouble connecting my vibrant to the computer before. I am not sure that even if i get my phone into dl mode i might not be able to connect to ODIN.
Please help!!
My tablet is stuck on the "N" in tap n tap . I have the stock rom. Just out of the blue this happened. I can hold down the power button to turn off but the tablet just does not boot past the "N". After amybe 3 minutes it loops to the TapNTap screen and then the "N" again. I do have CWM installed but otherwise it is stock. I ahte to loose all my data and apps and have to NV Flash again. ANyway to fix this without NVFlash ?
try booting into clockwork mod, clear cache. then install zip from sd card. find your update.zip and let it re-install. you shouldn't lose all your apps.
if that doesn't work, you might have to go the nv flash route. but, then you might as well flash one of the other custom roms as it totally changes the tablet for the better.
Thank you, will give it a try. Much appreciated.
My Amaze 4G won't turn on...
So this is what has happened:
- I rooted my phone following the guide on this forum and installed recovery successfully
- I then flashed BeastMod 2.3.0
- Wiped out everything, then I tried to turn on my phone it would be stuck on the HTC screen when you first turn the phone on. (only thing that was able to be booted was the bootloader and recovery)
- I was like CRAP! What did I forget?! Then I was like I think I read something about kernel... I was like crap...
- I took the SD card plugged it into my MyTouch 3G Slide and downloaded BeastMod 1.3 (I think, the one without needing a kernel).
- I then proceeded to install it through Recovery. It installed.
- To my amazement, it worked I was like YESSSS.
- Then I proceeded to install the Faux Kernel v007 and then BeastMod 2.30
- IT WORKED, I got to witness the lockscreen of the beastly BeastMod 2.30!!! I was like this is amazing. Then I was like I think it said a full wipe.
- So I went back into the recovery. I wiped/formated everything it let my format/wipe. I was like clean install FTW. (I don't know if I should've)
- To my dismay, when I rebooted it. ONCE AGAIN THE HTC SCREEN ARGHHHH. So I tried factory resetting it (which I don't know whether or not it does bring me back to stock YIKES...)
- Then I was like its late at night, I should go to sleep. I took out the battery. Put it back in. Plug it into the wall charger and went to sleep. I thought I would fix this problem tomorrow.
- Now when I woke up a few hours ago... my phone is not turning on. It was clearly plugged in and everything to the wall charger. Orange LED light on when I plugged it in. I searched this up on Google to no success in solving this problem.
Currently while writing this post I have taken my battery off for 10 minutes to see if it resets the phone's battery stats, etc.
I have some experience of knowing how to root and flash. I have flashed a MyTouch 3G slide (a bunch of times), a G2, and a G2x. The G2x experienced the same not turning on problem, but it was fixed somehow after a while.
The ultimate question is... how do I fix my Amaze 4G by getting it to turn back on and successfully flashing the latest BeastMod (which I have heard has beastly battery life) with a 100% clean install?
Oh and when I have it plugged into my computer. It keeps having that beep (repeatedly in an interval of 5 - 7 seconds) when you first plug the usb in to the computer.
EDIT (QUICK UPDATE): My phone is back on. I frantically pressed the power button like no tomorrow and it finally turned on, but its still stuck on the HTC screen. Right now I'll try reflashing BeastMod 2.30. Hopefully it works. :/
EDIT: ON BOOTLOADER, it says:
"battery voltage is too low
please change a battery."
bad battery already... the heck?
DarxMalFur said:
Oh and when I have it plugged into my computer. It keeps having that beep (repeatedly in an interval of 5 - 7 seconds) when you first plug the usb in to the computer.
EDIT (QUICK UPDATE): My phone is back on. I frantically pressed the power button like no tomorrow and it finally turned on, but its still stuck on the HTC screen. Right now I'll try reflashing BeastMod 2.30. Hopefully it works. :/
EDIT: ON BOOTLOADER, it says:
"battery voltage is too low
please change a battery."
bad battery already... the heck?
Click to expand...
Click to collapse
Get back into recovery and wipe battery stats. Should be fine afterwards.
Sent from my GT-P7510 using xda premium
Remember, if you can get into Recovery...you're OK!!!! Relax! It still sounds like you're shooting in the dark a bit (i.e. could have read up a little more before you took the leap), but...
1) Bad battery issue - really doubt it. It probably drained...why you might ask?
2) Which leads into the question of which Recovery did you install? Some of them apparently have "charging" issues. That might have contributed to the "battery voltage is too low please change a battery" message.
In any case, if you can charge the battery/swap with one of your friends with a compatible one (Sensation and Evo3D I think use the same battery), try that out. Or, try your luck at charging it some. Again, if you can get to Recovery, 99.99% of the time, you aren't screwed.
verkion
I always thought you have to wipe (cache, dalvik and factory reset) prior to flashing ROM because the ROM installs into the freshly wiped partitions.
Sent from my HTC Amaze 4G using XDA App
This is actually a very easy to fix issue.
You read that you needed to wipe after the phone was already on. You the proceeded and wiped/factory reset.
- After you do that, everything erases; therefore, you do not have a ROM installed in your phone anymore.
So the fix is:
1) Go into recovery
2) Wipe/factory reset (yes again, idk what you might have done)
3) Wipe cache
4) Advanced / wipe dalvik cache
5) Adcanced / wipe battery stats
5) Install .zip from SD card / choose .zip from SD card
6) Beastmod.zip (or whatever it might be called)
7) Restart the phone... it all works.
(You don't exactly have to do all those steps, but I would suggest you do to start your phone 100%% fresh for the new rom)
Enjoy!
- Xologist
xologist said:
This is actually a very easy to fix issue.
You read that you needed to wipe after the phone was already on. You the proceeded and wiped/factory reset.
- After you do that, everything erases; therefore, you do not have a ROM installed in your phone anymore.
So the fix is:
1) Go into recovery
2) Wipe/factory reset (yes again, idk what you might have done)
3) Wipe cache
4) Advanced / wipe dalvik cache
5) Adcanced / wipe battery stats
5) Install .zip from SD card / choose .zip from SD card
6) Beastmod.zip (or whatever it might be called)
7) Restart the phone... it all works.
(You don't exactly have to do all those steps, but I would suggest you do to start your phone 100%% fresh for the new rom)
Enjoy!
- Xologist
Click to expand...
Click to collapse
I tried all the instructions (except for flashing a new ROM, since I can't get the ROM to flash...) and it's still stuck on the HTC main page, when it first starts...
Help?
Download stock recovery and search for relock bootloader and search for stock ROM. Go to your hot boot and download stock recovery, after relock and put your stock ROM on your SD card. And the phone is going to boot on the factory (the same as you bought the phone).
william.laing said:
I tried all the instructions (except for flashing a new ROM, since I can't get the ROM to flash...) and it's still stuck on the HTC main page, when it first starts...
Help?
Click to expand...
Click to collapse
Just saying .. when i first flashed I also was scared on the htc screen but you actullay have to wait..
... Did u atleast wait like 2 to 3 mins... It takes time to load up the first time u install a mod..
---------- Post added at 11:59 PM ---------- Previous post was at 11:44 PM ----------
zab911 said:
Just saying .. when i first flashed I also was scared on the htc screen but you actullay have to wait..
... Did u atleast wait like 2 to 3 mins... It takes time to load up the first time u install a mod..
Click to expand...
Click to collapse
nvm I see u said u have flashed b4.. so Iam sure u waited long enough..
william.laing said:
I tried all the instructions (except for flashing a new ROM, since I can't get the ROM to flash...) and it's still stuck on the HTC main page, when it first starts...
Help?
Click to expand...
Click to collapse
This Happened to me..
I used command prompt and brought the device to the recovery mode and flashed the rom. Now the phone runs ICS and works like a charm.
You need to download android sdk for windows/mac or whatever OS you have on our computer and install it.
1. Download and copy a ROM or TWO on your microSD and put it back in your Amaze.
2. Open the Command Prompt.
3. Type adb devices and hit "Enter"
4. It should display HTC device
5. type adb reboot bootloader
6. Use the volume button to move to "recovery" and select it by pressing the power button.
7. Then select the install zip from SD card.
8. Select one of the ROM's from your microSD and once the install is Complete, hit the return arrow at the bottom of your phone's home screen and press power button to select "reboot phone now".
rahulntinku said:
This Happened to me..
I used command prompt and brought the device to the recovery mode and flashed the rom. Now the phone runs ICS and works like a charm.
You need to download android sdk for windows/mac or whatever OS you have on our computer and install it.
1. Download and copy a ROM or TWO on your microSD and put it back in your Amaze.
2. Open the Command Prompt.
3. Type adb devices and hit "Enter"
4. It should display HTC device
5. type adb reboot bootloader
6. Use the volume button to move to "recovery" and select it by pressing the power button.
7. Then select the install zip from SD card.
8. Select one of the ROM's from your microSD and once the install is Complete, hit the return arrow at the bottom of your phone's home screen and press power button to select "reboot phone now".
Click to expand...
Click to collapse
or you can just press volume down + power while turning the phone on.. and it goes into bootloader menu.
I think it's those 2 keys
VOLUME DOWN + POWER
uhg, i came across this thread after searching google. my amaze is down. i cant read the screen because it isnt back lit. i am using my co-workers iphone LED "flash-light" to be able to barely read it. i have done all of this:
1) Go into recovery
2) Wipe/factory reset (yes again, idk what you might have done)
3) Wipe cache
4) Advanced / wipe dalvik cache
5) Adcanced / wipe battery stats
5) Install .zip from SD card / choose .zip from SD card
6) install bullet proof rom zip
7) Restart the phone...
and when it restarted in launched with the HTZ logo, and then went black again.. I will have to wait till i get home to try another battery... let me know if anyone has any more suggestions.. i may need to try to download the stock rom and everything again? i hope my phone isnt FUBAR
he has 5.0.2.6 recovery flash my latest one 5.5.0.4 with working charge off
Hi there
My prime is stuck in boot, it will show the boot screen looping forever.
I have tried the following things:
- Resetting (button next to microSD)
- Holding volume up and power button to switch it off and back on
- Holding the power button for 15 - 30 - 60 secs
- Holding volume down + power button to get in the recovery menu
- Selected up for recovery mode, shows the android laying on its back, stops loading and reboots
- Selected down both for cold start and resetting user data.
This all failed. Anyone got an option or a solution?
Greets
Last solution to try before sending it back or returning is to try to drain the battery. Let it keep bootlooping or keep power off then on. Some had same issue n let battery drain. Then recharge it and it might fix itself like that. If that doesn't work, check out Asus website for prime trouble shooting or just exchange tablet. That recovery mode should work though. You go into recovery n clear all caches n data n whatever then factory reset through recovery.
Ok, thank you.
I will try that. Is there any option to re- install the tablet, if you connect it to your computer?
I've read about putting a firmware update on your microSD and then booting or something like that.
Yes, what u need to do is go to the Asus website n download the latest firmware to the root of microsd card. Make sure its the one that matches your prime n country. Also make sure its downloaded to root of memory card. Then put memory card in prime. Then go into recovery and make sure to wipe all data. Caches, dalvaik data. Then choose the option in recovery to flash the firmware. Make sure its pointed towards that file you installed in root of microsd card. It should then flash the revcovery. Make sure to read exact steps on Asus website for prime recovery flash to be sure. It should work after that.
Or you could hook your prime up to your computer. Make sure android adb n drivers installed to it. Then you can manually install the firmware again from Asus website into prime.
Good luck!
Thanks again!!! I will try this before draining. I will post if it worked.
That didn't work either
FIXED
Brollie said:
That didn't work either
Click to expand...
Click to collapse
Fixed it thanks to this post : http://forum.xda-developers.com/showpost.php?p=22857274&postcount=21
You need to rename the zip in the zip to the correct name (ep201_...update... -- see post)
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolDown+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
qery said:
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolUp+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
Click to expand...
Click to collapse
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Most important thing, this is no big deal at all, it's really a minor issue. Don't let yourself get stressed out over it, the community will make sure you're good to go.
CharliesTheMan said:
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Click to expand...
Click to collapse
Yes sure my bad, it was typo (I was kinda sleepy and tired when I was writing)
CharliesTheMan said:
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Click to expand...
Click to collapse
Nope, this is my first time flashing.
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
leppie said:
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
Click to expand...
Click to collapse
nope it's not there. I was holding voldown from the start and as soon as it should say 'press volup for recovery' (time 0:04) it jumps (skips 5 seconds of waiting) directly to wipe/fastboot options (wipe is one that is selected on video)
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
qery said:
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
Click to expand...
Click to collapse
glad it's fixed, im sure hanzo001 will appriciate a simple thanks on his thread too..and let others know it worked for you