ClockworkMod Recovery Help - Android Q&A, Help & Troubleshooting

Hi, So im in a boot-loop, im gunna use clockworkmod recovery to make a backup reflash my phone with my current stock ROM then recover.
Will my contacts and message be on my phone when i recover???
Silly question but i have to be sure!!!
Cheers, james

jamesbebby said:
Hi, So im in a boot-loop, im gunna use clockworkmod recovery to make a backup reflash my phone with my current stock ROM then recover.
Will my contacts and message be on my phone when i recover???
Silly question but i have to be sure!!!
Cheers, james
Click to expand...
Click to collapse
Have you established what it was that caused the boot loop? It might be worth taking a minute out and trying to work that out before progressing, if it was flashing a custom ROM, perhaps you should try that again, did you wipe etc beforehand?
So you plan is to
1. enter CWM recovery
2. take full Nadroid Backup
3. Perform Wipe
4. Re-flash current ROM (I'm guessing from ZIP file on SD not RUU?)
5 go back into CWM recovery
6. restore data partition?
Sounds good in theory and yes I believe that your messages will exist if you manage to restore data, I can't see what harm it will do - as you need to progress from where you are now.
Although, as I don't know what device you have and how you were intending ro re-flash your current ROM, you need to be careful that in re-flashing if you're using an RUU that you don't lock your bootloader or loose the custom recovery or you may have more work to do!!!

This is why im in a boot-loop
http://forum.xda-developers.com/showthread.php?t=1212063
Im running 'I9000XWJVB' stock.
1. Backup with ClockworkMod Recovery.
2. Flash stock ROM with odin.
3. After my phone boots up restore the backup i made.
Sound good?
Cheers, James

jamesbebby said:
This is why im in a boot-loop
http://forum.xda-developers.com/showthread.php?t=1212063
Im running 'I9000XWJVB' stock.
1. Backup with ClockworkMod Recovery.
2. Flash stock ROM with odin.
3. After my phone boots up restore the backup i made.
Sound good?
Cheers, James
Click to expand...
Click to collapse
Ah, yes, I recall posting on that thread yesterday - shame you couldn't resolve it.
But this route does sound more hopeful. The steps do sound good. Although ensure that you only do a selective restore after the flash as you don't want to perform a full restore or you'll end up back where you are now. So I reckon that you'll only want to restore the data partition.
After restoring the data partition from the backup, I'd suggest that you wipe the cache & dalvik cache from within CWM, before you reboot.
If you use any third party messaging application you may want to install that before you restore.

ben_pyett said:
Ah, yes, I recall posting on that thread yesterday - shame you couldn't resolve it.
But this route does sound more hopeful. The steps do sound good. Although ensure that you only do a selective restore after the flash as you don't want to perform a full restore or you'll end up back where you are now. So I reckon that you'll only want to restore the data partition.
After restoring the data partition from the backup, I'd suggest that you wipe the cache & dalvik cache from within CWM, before you reboot.
If you use any third party messaging application you may want to install that before you restore.
Click to expand...
Click to collapse
So far so good just restoring data part now..............Thank god for that it worked all my stuff is there!!! Im never playing around with that build.prop again ever!!!!! Anyway i have learn abit more on CWM so its not all a loss.
Cheers, James

jamesbebby said:
So far so good just restoring data part now..............Thank god for that it worked all my stuff is there!!! Im never playing around with that build.prop again ever!!!!! Anyway i have learn abit more on CWM so its not all a loss.
Cheers, James
Click to expand...
Click to collapse
Glad to be able to help....I'll be honest I learnt there to....
Although something for the future:
1. Always take a fresh backup before making any un-tested change.
2. Always have you current ROM ZIP on SD card at all times.
3. You can probably export your messages to your SD card (just in case)
Now press THANKS. button.

Related

Custom Recovery/Custom Rom Noob question

Ok so as I'm still new to this and currently have a rooted Aria, with clockwork mod recovery and attn1's liberated rom, I'm kind of confused as to what would happen if I wanted to try a new custom rom. I know I would need to backup first with nandroid but is that just in case I need an emergency recovery or does that recover apps and data etc? I know then you would need to wipe, does that also wipe my clockwork mod recovery as in I would have to flash that again? After I install my new custom rom, how do I restore previous apps/settings? Thanks for your patience
Your ROM and where clockwork recovery are seperate so even if you had to wipe your phone clockwork will still be in place.
And from my limited understanding, flashing a ROM shouldn't affect your data, otherwise you would have lost everything when you flashed attn1's ROM
Shad0wguy said:
Your ROM and where clockwork recovery are seperate so even if you had to wipe your phone clockwork will still be in place.
And from my limited understanding, flashing a ROM shouldn't affect your data, otherwise you would have lost everything when you flashed attn1's ROM
Click to expand...
Click to collapse
Well if you flash a new ROM, most of the time you have to wipe before you flash; you do lose your information this way, but its to make sure you install the ROM without difficulties.
Shad0wguy said:
Your ROM and where clockwork recovery are seperate so even if you had to wipe your phone clockwork will still be in place.
And from my limited understanding, flashing a ROM shouldn't affect your data, otherwise you would have lost everything when you flashed attn1's ROM
Click to expand...
Click to collapse
I thought they were seperate, thanks.
hocplyr98 said:
Well if you flash a new ROM, most of the time you have to wipe before you flash; you do lose your information this way, but its to make sure you install the ROM without difficulties.
Click to expand...
Click to collapse
So how can you backup/restore your info when you have to wipe? Whats the easiest method?
Either use titanium backup to separately backup info or use nandroid backup and advanced restore the data partition but note that the advanced restore doesn't work with every combination of roms
Sent from my HTC Liberty using XDA App
Shad0wguy said:
Your ROM and where clockwork recovery are seperate so even if you had to wipe your phone clockwork will still be in place.
And from my limited understanding, flashing a ROM shouldn't affect your data, otherwise you would have lost everything when you flashed attn1's ROM
Click to expand...
Click to collapse
I'm pretty sure attn1's ROM was an exception to that because it was the standard HTC Sense ROM without the AT&T bloatware. If you tried to install the Intruder 2.1 I'm almost positive you would have to wipe and lose everything before upgrading.
Sorry, I'm a noob here, and might not know what the heck I'm talking about.
After flashing a rom\keypad\kernel, and i see that it is working properly, do I need to leave it on the root of my sd card anymore or can I delete it? I am working with a 8gb card and it seems to be filling up fast.
moorreese said:
After flashing a rom\keypad\kernel, and i see that it is working properly, do I need to leave it on the root of my sd card anymore or can I delete it? I am working with a 8gb card and it seems to be filling up fast.
Click to expand...
Click to collapse
You can delete them. It is 100% completely safe to delete all of them after flashing them. But if its something you really like (like a special kernel, favorite rom, etc.) you may want to keep a backup somewhere (e.g on your pc).

[Q] Restoring my Vibrant back to stock

So I just installed Nerov4.1 which I must say I'm loving. However, my curiosity is making me want to check out axura's rom as well. I've read and seem some videos that state you should restore the phone to stock mode before installing another ROM. Is this true or can I just install another ROM through ROM Manager without having to do so? If I should restore my vibrant back to stock what is the best and easiest method to do it? I just want to make sure I'm doing the steps correctly when switching from ROM to ROM. Thanks for helping a newbie out fellas!
http://forum.xda-developers.com/showthread.php?t=803492
Thanks for the response but do I have to go back to stock mode each time I want to try a new ROM??
Sent from my SGH-T959 using XDA App
I'm very much just a noob, but as far as I'm aware you MUST disable voodoo. Vodoo comes automatically switched on in 4.1. If you are going back to stock this must be done.
I think you can go into clockwork recovery and turn it off. Or there's an app in the market that will be able to confirm/ switch it on or off I think.
thebig88 said:
Thanks for the response but do I have to go back to stock mode each time I want to try a new ROM??
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Depends, but is recommend.
Depends on?
Sent from my SGH-T959 using XDA App
I wrote steps in the noob guide... but as I pointed out there also, you do not always need to go back to stock.
I would disable voodoo (just to be safe)
make a backup
reboot
go back to cwr
factory wipe/wipe data/wipe dalvik (advanced)
flash the rom
reboot and wait
let the phone sit for 10 minutes
reboot
restore your apps (titanium Backup, assuming you use this app)
reboot
enable voodoo if not already
reboot
If you notice any issues then you should ODIN back to stock the flash the rom.. there may be "ghosts" from the previous rom causing the issue... it's a best practice, but absolutely not needed.
s15274n said:
...
factory wipe/wipe data/wipe dalvik (advanced)
...
Click to expand...
Click to collapse
You mean that all data from internal disk will be erased, inculding the titanium backups?
Thank you in advance!
im wondering the smae thing.ive been flashing a lot of roms and havent had to go back to stock but i know its only a matter of time.if you find a method that works great for you please let me know
when we install new roms doesnt the process wipe the system data and dalvik cashe.why is it better to use your method.im just a curios noob
no.. all your pics, videos, etc will still be there unless you do a format yourself.

[Q] Newbie stuck after flash

Hi, I'm pretty new at this. I managed to odin to JFD, and flashed Toxic Crazy8 which I really love. I've been using it for most of this week. Tonight I decided to flash the Carbon Fiber Blue theme for it. So I followed the instructions in the dev thread - booted into clockwork recovery, wipe cache partition, flash theme, wipe dalvic, fix permissions, reboot.
At that point, it hung on the spinning Samsung animation of the bootup and would go no further. So, I went back to recovery, and restored to my latest nandroid backup. (wiped dalvic, fixed permissions, reboot) Now its stuck on the Bali startup screen with the palm tree and will go no further.
Advice please? So sorry I messed with it when it was working so well.
Best way is to go into download mode and flash back to JFD
Thanks. I'm at work right now so will have to wait till I get home to hook it up to the computer to use odin. Is that the only way? Could I just flash the Toxic 8 rom or will that mess things up worse?
Go here and download the Revert package. Flash it and then reflash the Carbon if you want or leave it at stock. I ran into this a few times. Something about the themes.
A nice theme is in that same thread. It is a Gingerbread theme. I used it for a long time.
Recovery
Wipe Cache and Dalvik
Flash Revert
(if you want to flash another theme, here is where you want to do it).
Wipe again for good measure
Fix permission for good measure
Reboot. This will take up to 5mins but should do the trick.
Woodrube said:
Go here and download the Revert package. Flash it and then reflash the Carbon if you want or leave it at stock. I ran into this a few times. Something about the themes.
A nice theme is in that same thread. It is a Gingerbread theme. I used it for a long time.
Recovery
Wipe Cache and Dalvik
Flash Revert
(if you want to flash another theme, here is where you want to do it).
Wipe again for good measure
Fix permission for good measure
Reboot. This will take up to 5mins but should do the trick.
Click to expand...
Click to collapse
Thank you. I think I will leave at stock I don't need these messes. But now that I'm stuck at the Bali boot screen, how do I load that revert file onto the phone? I'm having a brain cramp here probably because I worked all night.
What I think you can do is, if you can get into recovery with the button combo, do that. Hopefully you have either the original ROM zip on your SD card or you can get into your backups.
It really all depends on what you have on your internal SD since right now it is un-usable as-is.
A. Boot into recovery, wipe and flash your backup.
B. If this doesn't work, then flash the original ROM. Let it boot. Once that is done then you should be able to reflash your backup or at the very least reinstall XDA app and go to this thread and download the revert package and reflash.
C. Wait until you get home and Odin and then reflash your backup.
Sucks I know and especially being "trapped" at work.
Ok, got it into red recovery. I'm home now. I tried downloading the AIO Vibrant toolbox program, but it keeps freezing on my computer.
When you say "wipe and flash your backup" I want to make sure I understand what wipe you're talking about. Wipe cache? or wipe data/factory reset ?
I do so appreciate the help. I learn by making mistakes and man, I've learned so much the past couple of weeks messing with this phone.
Edit: I managed to mount the usb storage in recovery, so copied the revert file to my sd card.
I wiped cache and dalvik, flashed the revert, wiped again, fixed permissions, and rebooted. Still stuck at the Bali screen.
knitten2000 said:
Ok, got it into red recovery. I'm home now. I tried downloading the AIO Vibrant toolbox program, but it keeps freezing on my computer.
Click to expand...
Click to collapse
Don't forget to download the .net files too.
When you say "wipe and flash your backup" I want to make sure I understand what wipe you're talking about. Wipe cache? or wipe data/factory reset ?
Click to expand...
Click to collapse
Wipe cache and wipe dalvik-cache. Don't Factory Reset unless you are doing a clean install, otherwise you'll wipe out the nandroid you just restored.
I do so appreciate the help. I learn by making mistakes and man, I've learned so much the past couple of weeks messing with this phone.
Click to expand...
Click to collapse
We have all been there. Don't let this scare you off though. Use what happened and learn from it. When theming though, always look for a revert package and download that before flashing any themes.
Hey you knew rule #1 though. "Always make a backup". Good luck and try the Gingerbread theme. It is refreshing as opposed to the stock Black that came with the ROM.
I edited my last post as you were replying. I wiped, flashed the revert, and now stuck at the Bali screen again.
Keep trying. IIRC i had to do it a couple of times for it to stick. Remember it takes a bit to rebuild the Dalvik after a wipe.
If you keep trying and it doesn't work, the since you can get into red recovery, maybe flash fresh ROM and once it boots up and settles down, maybe try restoring you back up then.
Ok, I'm searching for info on restoring the backup. Do you just use the backup and restore menu in recovery? Or do you somehow flash the backup file in a different way?
Just use Restore/ Backup in the recovery. There is an advanced part of it too. Try just restoring the /system part only as it holds the Framework-res.apk and Services.jar files that the themes use. Hopefully that will do the trick. If not then you can restore all and it should be fine.
Well after trying the revert twice, I flashed the Toxic Crazy 8 zip instead. It's alive!!! Thank you so much!!
This stuff is not for the faint of heart I can see. So glad for the help here.
Will be putting it aside for now and getting some sleep.
Since you'll be essentially starting from fresh, you should flash Deranged9 (also from JCC with equally great battery life) and a nice blue theme (RC3 is the one now).
Or try Fish's redux of Bionix' 1.3.1
My daughter has this phone and looking to root it but I see many pole getting stuck. I think ill wait on doingthat
Rooting is easy. Just go to the Noob guide stickied up in Q&A and scroll down to Option A. Download that, put it on your internal SDcard, reboot into recovery, reinstall pacakages (will have to do this twice) and reboot.
ROOT does not do anything but give you permission to the internal Adroid O/S. It is usually the mods that you do after the fact that can/will screw things up. Rooting doesn't change o/s, doesn't affect battery life, doesn't make your phone not send data,...all it does it give you access (and probably void your warranty).

[Q] DX2 doesn't boot after backup

Hello, I have a major problem with something that should have been a minor project. I used System Recovery to do a backup of the phone. The only thing I can think of there that I might have done differently is save the backup to the external SD card, instead of internal. After the backup completed, I went to reboot the phone and it's stuck on the Motorola splash screen. I tried to pull the battery and go into that general Android Recovery in order to wipe data and try again, but I just get the Android with an exclamation point over his head. I've tried booting it without the SD card too. I was using CM7
Can anyone help please!
EDIT: A couple hours later, since it was my work phone, I had to do something. I reverted the SBF, re-rooted and tried to restore from the backup I made and the same thing happened. I'm going to try to revert to my previous backup. I have a full backup from Titanium Backup if it comes down to it. The phone was working fine, I just can't figure out why it blew up on me after I ran the backup. Grr..
iceolate said:
Hello, I have a major problem with something that should have been a minor project. I used System Recovery to do a backup of the phone. The only thing I can think of there that I might have done differently is save the backup to the external SD card, instead of internal. After the backup completed, I went to reboot the phone and it's stuck on the Motorola splash screen. I tried to pull the battery and go into that general Android Recovery in order to wipe data and try again, but I just get the Android with an exclamation point over his head. I've tried booting it without the SD card too. I was using CM7
Can anyone help please!
EDIT: A couple hours later, since it was my work phone, I had to do something. I reverted the SBF, re-rooted and tried to restore from the backup I made and the same thing happened. I'm going to try to revert to my previous backup. I have a full backup from Titanium Backup if it comes down to it. The phone was working fine, I just can't figure out why it blew up on me after I ran the backup. Grr..
Click to expand...
Click to collapse
sounds like a bad backup. i always use external sd for nandroids and it has never had issues.i would just re-flash. as for stock recovery with andy with an exclamation , push both volume keys. should work regardless of what state the phone is in. i have had it completely unusable and it still worked.
Lorenzo VonMatterhorn said:
sounds like a bad backup. i always use external sd for nandroids and it has never had issues.i would just re-flash. as for stock recovery with andy with an exclamation , push both volume keys. should work regardless of what state the phone is in. i have had it completely unusable and it still worked.
Click to expand...
Click to collapse
OK - You mean to flash cleanly with CM7 and then restore from Titanium backup instead of my previous nandroid backup?
I'm slightly confused about that System Recovery tool, because first I had ROM Manager and it says that CWM is installed, but it doesn't work. Do I have to manually install that System Recovery APK each time I do stuff like this, or does it stay installed? And if so, from a powered off state, how do you enter it? Or do you have to boot up to Android and enter recovery mode from the app? Thanks.
iceolate said:
OK - You mean to flash cleanly with CM7 and then restore from Titanium backup instead of my previous nandroid backup?
I'm slightly confused about that System Recovery tool, because first I had ROM Manager and it says that CWM is installed, but it doesn't work. Do I have to manually install that System Recovery APK each time I do stuff like this, or does it stay installed? And if so, from a powered off state, how do you enter it? Or do you have to boot up to Android and enter recovery mode from the app? Thanks.
Click to expand...
Click to collapse
yes i would try that. second, dont use rom manager. dont delete it either. but it doesnt work on our phone. the bootstrap recovery that you install would only need to be reinstalled if you delete cache in recovery. otherwise it should always work. hope this helps. im not completely sure exactly what you are asking.
try just restoring system part of backup, see if phone will boot, then restore user data
or reinstall cm7 and restore just user data
Sent from my XT862 using xda premium
sd_shadow said:
try just restoring system part of backup, see if phone will boot, then restore user data
or reinstall cm7 and restore just user data
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
I should be fine now, thanks for the advice. I don't know why that backup blew up the phone, but it was sure an inconvenience haha! I just reflashed CM completely, and now I'm gonna roll out my Titanium backup. I don't have a lot of stuff, just the essential stuff for work, so it shouldn't take too long.

[Q] Flashing a ROM for the first time, but need to keep data settings

I'm trying to flash the Santod Stock ICS, debloated, deodexed ROM onto my phone.
I'm coming from Stock GB, and I have already got S-OFF and Root with the HTC Thunderbolt All-in-one-tool.
However, I am currently confused and stuck on what to do next. The catch is that I dont get my service through Verizon, but through Mobi PCS in Hawaii which basically just offers 3G and this required me to pay someone locally to hack the phone and input manually the data settings.
Now, I notice that in the instructions for flashing this ROM is to totally wipe the partitions. Is this really necessary? Only asking because I don't want to lose the data settings and possibly have the phone not be able to have service or have to pay for the settings to be put back on.
I have already created a backup through 4ext, so I think I should be fine with that part. Is there a way for me to back up the data portion of the phone, wipe the partitions, and restore it after I flash the ROM? Besides all that, which radio should I flash first before the ROM?
I would really appreciate some help if anyone has the time.
Thanks
Since you made a nand backup in 4ext you should be OK to do a full wipe (yes you have to full wipe, data,cache and system). If something is wrong then restore your backup and you should be OK. The problem I see you having is that you will have to flash the new radios in order to flash ICS. I'm pretty sure that will mess up any settings you have for the modem which means you would have to get your phone flashed to that service again.
Sent from my One using Tapatalk
disconnecktie said:
Since you made a nand backup in 4ext you should be OK to do a full wipe (yes you have to full wipe, data,cache and system). If something is wrong then restore your backup and you should be OK. The problem I see you having is that you will have to flash the new radios in order to flash ICS. I'm pretty sure that will mess up any settings you have for the modem which means you would have to get your phone flashed to that service again.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Got it. So the wipe is basically a full wipe? does my SD card need to be wiped too?
kfactor1469 said:
Got it. So the wipe is basically a full wipe? does my SD card need to be wiped too?
Click to expand...
Click to collapse
Nah you don't have to wipe the SD. Also, since you have to do a full wipe you can use an app called titanium backup to back up user apps and data. Make sure you don't restore system apps from gingerbread into ICS.
Sent from my One using Tapatalk

Categories

Resources