I m from pune and,Recently I activated airtel 3g in my samsung galaxy ace... Bt problem is that I m not getting 3g signal.
In samsung galaxy 3 there are options like dual mode/3g mode,bt in galaxy ace when I go in mobile networks there are this options : enable packet data, data roaming, access point name, mobile operator, use only 2g networks.according to airtel customer care I should chk on enable packet data and unchk on use only 2g network options I did so bt still can't get 3g,signals..
I tried to use 3g signals in many places in pune..bt still I m jst,getting edge connection
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
mastrone said:
Are you sure there is 3G network? If so, did you make sure that in APN list there is the one provided by your carrier for 3G ?
Click to expand...
Click to collapse
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
vj1 said:
Yups I m sure that here in pune there is a 3g network and as I said I have already unchkd use only 2g network option..bt still can't get 3g signal...so is there any additinal settings that I mst do...
Click to expand...
Click to collapse
Have you checked your APN settings?
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Review the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Hello everybody!
I installed the rom version 2.3.4 (vivo - Brazil) in my galaxy s5830L (3g 850/1900MHz). My mobile carrier works with 3G 2100MHz, so I can not connect to 3G only 2G (edge).
Do you know if there is any possibility to enable 2100MHz in s5830L 3G?
Thank you!
nims11 said:
Uncheck 2g mode only. If still you not see 3g symbol at left side of signal then in network setting go network operators and search available networks and choose airtel 3g.if still not get then go into keypad and type *#*#4636#*#* and select option phone imformation and in that you see gsm auto selected. In that choose wcdma only and press turn off radio then press turn on radio now press home button(not back button). You will get 3g. If not then reboot. I hope this will help you
Click to expand...
Click to collapse
Hey really thnks for ur help...bt I want to clear some doubts see as u said i mst select airtel 3g bt problem is in network operators I m jst getting airtel option not airtel 3g.
And in second method after entering that code u said to press home button is it the that big middle button..and how to again stop 3g...
Most imp I chked in samsung monte with same sim card of airtel in same area bt in that mobile 3g signal came immediately...
See I know I m asking u many ? Bt plz try to understand I'm new to this!!
iceman2029 said:
You are using the wrong ROM or MODEM file with a Band Operator that's not supported for your company. Revieew the frecuency of your operator for 3G. Then, flash your phone with the correct ROM.
Click to expand...
Click to collapse
How to review frequency of operator for 3g..
And one more thing when I tried with same sim card in same area on samsung monte I immediately got 3g signal jst after selecting 3g mode..so I want to know do u still think there is a problem with rom....
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
Hey I tried ur method of dialing that code and then changing it to WCDMA mode ..after selecting this option for some time in status it shows no connection like a white circle with cross line in it and after few seconds it again shows Edge connection ..and again u enter that code in that network type option it again automatically gets change to gsm auto!!
Now I m really getting frustrated by this problem I called Samsung helpline they said for using 3g in some mobiles u have to do a Software Update in Samsung Service centre after which u will get that 3g/dual network mode option in ur Mobile network settings like other mobiles, bt I doubt if they can really help me bcozz about 2 months ago I had already done a Firmware update earlier its version was KC1 and after update its version is KC7 which i think is the latest version of Firmware available in India for Samsung galaxy ace. I said this to Samsung technical Support but they say that Software update and Firmware Update are completely Differnet things…
So I want to know whether this Software update and Firmware update are this realy different Or its same. I have also Noticed one more thing in “Samsung galaxy Fit “also there is no Option like 3g/dual Network mode to Enable 3g!! is that option diabled in all galaxy Ace & Fit models or is it only in my cell???
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
nims11 said:
After selecting wcdma only turnoff radio and again turn on radio then push middal button called home button. When you doesnt want 3g mode tick on 2g mode only.
I also suffer from same problem when i use bsnl3g. You should camplain in airtel servise center because it is not fault of mobile but fault of network provider. If you want to chek then insert other sim and uncheck on 2g only and select access poit . If you get 3g then your mobile is not in fault. I want to know that you get 2g internet on that airtel card? And you choose access point?if not then select access point
Click to expand...
Click to collapse
dude i think u are not reading my posts completely..i can say this bcozz right from my first post of this thread i m mentioning that with same sim card of airtel i m getting edge connection..and the problem is not with sim card its with cell itself bcozz when i tried same sim card in other mobile i immediately got 3g signal in same area..that bcozz after lots of search on google i saw that many are facing this problem of 3g not connecting..its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
1. which one will be better to go with android 2.3.3 Gingerbread or 2.3.4 Gingerbread for Samsung galaxy ace I mean which one has less problems and will solve my 3g problem!!
2. after unofficially upgrading to 2.3.3 or 2.3.4 will I be able to officially upgrade to 2.3.5 through kies in future.
3. For upgrading to 2.3.3 or 2.3.4 is it necessary to root the phone..
4. how much time does a whole upgrade process takes if my internet speed is Minimum 1Mbps…
5. How to come back to 2.2.1 Froyo Default version from 2.3.3 or 2.3.4(Steps with video or Img link will be very helpful)
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
nims11 said:
Update to 2.3.4 is realy easy and not require root. You should first download 2.3.4 flash file and after download use odin to install flash file. When official update comes you can downgrade your phone to froyo so kies update it to latest version so chill.
My email is [email protected]
contact me i will explain you how to update to 2.3.4 and where to download
Click to expand...
Click to collapse
K gr8 ..jst 2 questions how to downgrade back to froyo 2.2.1 I mean steps... And secondly does 2.3.4 gives any problem I mean any hangs, etc...
2.3.4 not hang atall. It remove lags from many games. I use it from 2 months and not get any problem. So just update. And abowt downgrade i post in my blog tomorrow. I hope you undarstand because you need to flash two firmware to get ddkc1(indian firmware)firmware back. So wait for that. But i ensure you that you will not downgrade in near future because gingerbread rocks
its due to a software bug in froyo 2.2.1 so people say only way to solve this problem is we will have to upgrade our froyo to 2.3.3 or 2.3.4 this might solve our problems bt still i have some queries which i have to clear like see if u can ans them :
Click to expand...
Click to collapse
Strange I use the same phone no issues getting 3G here in Mumbai on a Vodaphone network. In my phone under settings - wireless and network settings- Mobile Networks- the option of use only 2G networks is unchecked. Let us know if the firmware update rectifies the issue....
hey Dude any idea wat are Apn Settings for Airtel 3g ..
i mean :
Access Point name: ??
APN:??
Hi.
I bought ace S5830 from USA (and this phone only support 850/1900 Mhz), but i live in Azerbaijan and here I use mobile operator sim that only have 2100 mhz band for 3G network. Logically, my phone can not connect to 3G network. My question,
1.is it possible change the band?
2. If it is possible, how we can change, upgrade to new firmware ?
p.s. I have upgraded it to GINGERBREAD.UBKP7
Please help me to solve these issue,
Thank you before hand.
plese help me with problem above
Related
HI, I have a problem withe Internet connection in my phone. I bought it in Three Ireland and there was no possibility to change between 3G and Gsm. So i flashed new KI3 stock rom and then I was possible to do it. After I flashed the Batista rom and when I changed it to GSM I got a message that I lost internet connection and R icon over signal bars. Phone was showing GSM connection but there was no Internet in the phone. I changed it back to Auto but that R was still there and no internet. I recovered my stock firmware but it didn't solve the problem. I went to Settings->Wireless and network->Mobile networks->Network operators and chose 3 (3G) network. It helped but when I turned off the data I got that R letter and after turning it back on only GSM and no internet. Anybody know the reason? Thanks for help.
midasziom said:
HI, I have a problem withe Internet connection in my phone. I bought it in Three Ireland and there was no possibility to change between 3G and Gsm. So i flashed new KI3 stock rom and then I was possible to do it. After I flashed the Batista rom and when I changed it to GSM I got a message that I lost internet connection and R icon over signal bars. Phone was showing GSM connection but there was no Internet in the phone. I changed it back to Auto but that R was still there and no internet. I recovered my stock firmware but it didn't solve the problem. I went to Settings->Wireless and network->Mobile networks->Network operators and chose 3 (3G) network. It helped but when I turned off the data I got that R letter and after turning it back on only GSM and no internet. Anybody know the reason? Thanks for help.
Click to expand...
Click to collapse
Q: Where are you located now?
The sim is roaming, same as mine, as I am out of the UK and have the small R showing. You also have the phone ex Ireland, so it will be configured for there.
If you are in the UK then you will have to change the rom to a stock UK one, including the csc.
Are you on a UK sim?
No, I am in Ireland all the time where I bought the phone. I got that when I changed form Auto mode to Gsm in data settings. Then I got the message Internet connection lost and R letter over signal bars. When I switched back to Auto mode still had that R and no internet. I had to chose manually network operator to 3 (3G) to get it back working.
If you are in the UK then you will have to change the rom to a stock UK one, including the csc.
NO just change the CSC to UK version if problems or enter network settings manually .
jje
I am in Republic of Ireland not in the UK. CSC is stock all the time: XEU.
I briked my phone recently" after instaling chainfire 3D",i dont know what ROM version i had before that but i used ODIN to recover my phone ussing another version of ROM.I managed to find FROYO 2.2 available(support) for my country( Romania),but i noticed that mobile network is not working anymore(except Wi Fi),
before this mess the 3G ,GPRS or EDGE signal was present and i have the option to turn on or off the mobile connection,but now i cant do that anymore and i dont have 3G signal anymore,and I dont know why because i have the correct settings in APN. In "About phone" / "status" i have the following values:Mobile network type: UMTS or GPRS from time to time, and for Mobile network state is DISSCONECTED or Connecting from time to time.When i long press the end call button the Phone option appears and when i chose Mobile Network option (Connect to internet is OFF) it does nothing....Can anyone help me in this problem ?,some say that there is a secret code for service that test the 3G conecction but i dont belive that......?..For this reason(problem) i installed four different versions of ROM,and my best option is to manage to find a solution for the current ROM that i have)Sorry for my english or for my posible double post...
I found the official stock ROM i had before and fixed the problem with 3G signal,Is very important to use the correct ops file,i used EUROPA_I5508_v1.0.ops(because i'm an idiot) and the one i needed was EUROPA_I5500_v1.0.ops and i think that is one of the reason for the lost of 3G signal.
Here's my story, about 3 weeks ago i bought my new xperia SP, and first i get the sim card provide by some operator that include the package. And for some reason i have to change the sim card for another operator, but after i change the sim card the signal seems low then the first operator. And i try to get some information about this android phone. And i get this some information that give some advice about setting the signal. And the good thing about it is it can make the battery can last a little longer because the setting set just choose the wcdma only or just gsm only it depends what the best in my area, and can reduce the heating that cause from device always search what the best network if we choose the wcdma/gsm option. And here the thing start. I follow the instruction: first you dial *#*#4636#*#* and the setting window come out. And the choose phone setting, set the network to wcdma only or gsm only. And i choose the wcdma only. After that start to refresh the smsc and update it. After that the instruction said to choose to select the radio band. After i select the radio band my device loose the signal and it just show x in signal bar. After that i try to restart the phone but it come out the same no signal appear. I try to remove and replace the sim card but it steel same, i try to change with another sim card from another operator and it steel same. After that my last choice is to reset my phone to factory setting. And seems it work my signal is back. But after that my phone signal become so weak and recently i got my signal got lost for a view time it just show x but it's not for long the bar seems back again. I start confused is that the advice i choose is wrong ? And there a some info that i got from some search in internet that says upgrade the baseband can make a risk that wifi, LTE signal, and the other connections setting loose they capabilities. I'm so frustated now need help immediately, anybody have some advice or solution? thank you first.
send from my Sony Xperia SP using XDA Premium
Anyone here can give some info about my problem here?
Sent from my C5302 using xda premium
BlackFilter said:
Here's my story, about 3 weeks ago i bought my new xperia SP, and first i get the sim card provide by some operator that include the package. And for some reason i have to change the sim card for another operator, but after i change the sim card the signal seems low then the first operator. And i try to get some information about this android phone. And i get this some information that give some advice about setting the signal. And the good thing about it is it can make the battery can last a little longer because the setting set just choose the wcdma only or just gsm only it depends what the best in my area, and can reduce the heating that cause from device always search what the best network if we choose the wcdma/gsm option. And here the thing start. I follow the instruction: first you dial *#*#4636#*#* and the setting window come out. And the choose phone setting, set the network to wcdma only or gsm only. And i choose the wcdma only. After that start to refresh the smsc and update it. After that the instruction said to choose to select the radio band. After i select the radio band my device loose the signal and it just show x in signal bar. After that i try to restart the phone but it come out the same no signal appear. I try to remove and replace the sim card but it steel same, i try to change with another sim card from another operator and it steel same. After that my last choice is to reset my phone to factory setting. And seems it work my signal is back. But after that my phone signal become so weak and recently i got my signal got lost for a view time it just show x but it's not for long the bar seems back again. I start confused is that the advice i choose is wrong ? And there a some info that i got from some search in internet that says upgrade the baseband can make a risk that wifi, LTE signal, and the other connections setting loose they capabilities. I'm so frustated now need help immediately, anybody have some advice or solution? thank you first.
send from my Sony Xperia SP using XDA Premium
Click to expand...
Click to collapse
I've been facing the excat same problem with my Xperia SP (C5303)....
Please, can ayone help us?
Thanks.
I have the same problem too. I go to the service menu then select the USA band, and I lost the signal. And there is no networks found/available!
The solution is, you need to flash the baseband. First you need to download the newest stock rom (the stock must for your country, you can try asking Google). After that, you download and install the flashtool ( ask to Google too ).
After that, install the drivers (not compatible on Windows 8.1 ), goto C:/FlashTool/Drivers, and run the installer, then select Flashmode Driver.
After you install the driver, move the downloaded rom to C:/FlashTool/Firmwares, then run the flashtool via start menu.
Click thunder icon, select Flashmode, then select the firmware you downloaded.
Make sure that you only flash baseband, not kernel or wipe data, or anything (I forgot where the checkboxes located)
Then, click flash. Turn of your phone. Then hold Volume Down Button, and plug the USB cable that connected to PC, until the illumination bar turns green.
Then wait the process, and it's done.
I hope this helps you
If you want Indonesian version you can message me )
Xperia sp wifi problem
WHEN I ROOTED MY XPERIA IT WAS OK. BUT NOW A DAYS WIFI CONNECTING LOW AND SHOWING POOR CONNECTION? is there any update for xperia sp wifi? any solution plzz help
Smankusors said:
I have the same problem too. I go to the service menu then select the USA band, and I lost the signal. And there is no networks found/available!
The solution is, you need to flash the baseband. First you need to download the newest stock rom (the stock must for your country, you can try asking Google). After that, you download and install the flashtool ( ask to Google too ).
After that, install the drivers (not compatible on Windows 8.1 ), goto C:/FlashTool/Drivers, and run the installer, then select Flashmode Driver.
After you install the driver, move the downloaded rom to C:/FlashTool/Firmwares, then run the flashtool via start menu.
Click thunder icon, select Flashmode, then select the firmware you downloaded.
Make sure that you only flash baseband, not kernel or wipe data, or anything (I forgot where the checkboxes located)
Then, click flash. Turn of your phone. Then hold Volume Down Button, and plug the USB cable that connected to PC, until the illumination bar turns green.
Then wait the process, and it's done.
I hope this helps you
If you want Indonesian version you can message me )
Click to expand...
Click to collapse
Did this method work? cause two of my friends are having signals dropping issue. they both are updated to the latest version. 12.1.A.1.201
Same issue - did you get a resolution?
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Damn bad English :crying: :crying:
babugd said:
WHEN I ROOTED MY XPERIA IT WAS OK. BUT NOW A DAYS WIFI CONNECTING LOW AND SHOWING POOR CONNECTION? is there any update for xperia sp wifi? any solution plzz help
Click to expand...
Click to collapse
well Sony is bad, it is normal the XSP got low signal and also this product is discontinued. There will be no any updates again in the future :crying:
chesterr said:
Did this method work? cause two of my friends are having signals dropping issue. they both are updated to the latest version. 12.1.A.1.201
Click to expand...
Click to collapse
that solution is for you accidently choosen the wrong band, and you lost the signal forever. If they are having low signals, try switching from WCDMA to 3G
soumit.c said:
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Click to expand...
Click to collapse
what is your problem? No signal or low signal?
Not connecting to 3G.
Smankusors said:
Originally Posted by soumit.c
Was this problem resolved? How? Please share your solution, as I too am facing the same issue now.
Smankusors: what is your problem? No signal or low signal?
Click to expand...
Click to collapse
Ok, sorry for not giving details earlier. I've been using my XSP for 6 months on a 2G connexn, and all was good. Then I tried to shift to a 3G and my problem, on WCDMA only or WCDMA Preferred, I get absolutely no connection, no voice, no data, no bars! GSM only for 2G is still fine. Wifi is working fine.
Hey guys, recently I've got an Alpha SM-G850A which is for AT&T. I live in Iran and the phone has been unlocked to work here, I was trying to get the Android Lollipop 5.0.2 for my phone. so first I tried to get the update from AT&T software update by phone, but it says that there seems to be no updates available for me, nevertheless on the net the guys claim that they've got the update, is it due to my location in Iran and my internet IP? (I used VPN too but again, no updates). I tried to get the firmware from Sammobile.com too, but there were no firmwares detected for SM-G850A. Can someone help please?:good::good:
BTW, I've got the cellular data from my operator, and it works, but I can't select which type I wanna use (2G, 3G or 4G). I mean there's no options in the phone settings to select the data connection type. NEED HELP!
mamadmoghtaderi said:
BTW, I've got the cellular data from my operator, and it works, but I can't select which type I wanna use (2G, 3G or 4G). I mean there's no options in the phone settings to select the data connection type. NEED HELP!
Click to expand...
Click to collapse
Even tho the phone is working on other networks you will still need an at&t sim card to update it. There is no way around this as far as i know.
Type below code in dialer and select Device information. Now, if you scroll down you will have the option to change network type.
Code:
*#*#4636#*#*
Hi guys , i dunno if this is the right section for this question but i'm a newbie here , i got two sm-g925r7 locked to nTelos i think and i want to unlock them for international gsm use outside the u.s , is this possible ? if yes do you know a guy who can do them at a reasonably price ? since this can work on sprint cdma phones i don't see why it can't work on nTelos since they are both cdma ? correct me if i'm wrong , i need your help guuuuuys please.
How do you know if they're locked to nTelos? Did you try putting in another carrier's Sim card? Uru
nothing happens
i know couse i bought them on ebay and the sellers stated that in their description , and the sm-g925r7 is for cspire or ntelos only ? i tried using a foreign sim card , ( i'm outside the u.s ) and nothing happens , phones search for network 2-3 secs and then they just show that little barred signal icon on the top right corner
Well on the nTelos website it says all android phones are unlocked so I dont know.
checked that
DJCharlie said:
Well on the nTelos website it says all android phones are unlocked so I dont know.
Click to expand...
Click to collapse
yeah man i already checked that , but if it's a remote unlock i think it can be done by using a sprint firmware
mariosota said:
i know couse i bought them on ebay and the sellers stated that in their description , and the sm-g925r7 is for cspire or ntelos only ? i tried using a foreign sim card , ( i'm outside the u.s ) and nothing happens , phones search for network 2-3 secs and then they just show that little barred signal icon on the top right corner
Click to expand...
Click to collapse
that model just sends sms and LTE data, no calls
DEXEIL said:
that model just sends sms and LTE data, no calls
Click to expand...
Click to collapse
How can i unlock these features at least? Or it should be ready when u put a 4g sim card , i tried using old 3g sim cards and it just searches for signal
mariosota said:
How can i unlock these features at least? Or it should be ready when u put a 4g sim card , i tried using old 3g sim cards and it just searches for signal
Click to expand...
Click to collapse
You can unlock by enabling service menu
-Insert 4G sim card
Dial *#27663368378# -This will put you in service mode
* tap UE Settings & Info > Settings > Protocol > NAS > Network Control > Band Selection > Choose choice 7 “LTE/GSM MODE ONLY”
Restart
DEXEIL said:
You can unlock by enabling service menu
-Insert 4G sim card
Dial *#27663368378# -This will put you in service mode
* tap UE Settings & Info > Settings > Protocol > NAS > Network Control > Band Selection > Choose choice 7 “LTE/GSM MODE ONLY”
Restart
Click to expand...
Click to collapse
Ok I'll try this code , i tried several ones but with no success , i think the firmware blocks all codes on these phones .Thanks mate
mariosota said:
Ok I'll try this code , i tried several ones but with no success , i think the firmware blocks all codes on these phones .Thanks mate
Click to expand...
Click to collapse
you can enable service menu by rooting the phone, tested on android 5.0.2 and 5.1.1
DEXEIL said:
you can enable service menu by rooting the phone, tested on android 5.0.2 and 5.1.1
Click to expand...
Click to collapse
Ok I'll root using the sprint rooting as I've tried this before with success, but first I'll downgrade them to 5.1.1 and hopefully i'll get past this ,since the settings will be set to lte/gsm why wouldn't it work with calls ?
mariosota said:
Ok I'll root using the sprint rooting as I've tried this before with success, but first I'll downgrade them to 5.1.1 and hopefully i'll get past this ,since the settings will be set to lte/gsm why wouldn't it work with calls ?
Click to expand...
Click to collapse
I hope flashing to sprint version or trying with different bootloader / modems could be the solution, I have not found any guide yet
Ok so i rooted the phone and used root explorer to enable service mode , restarted the phone , opened service mode and selected lte/gsm only , restart , phone asks for sim pin and then nothing , no data sms or calls
I am also interested in this unlock but haven't found a solution yet.
mariosota said:
Ok so i rooted the phone and used root explorer to enable service mode , restarted the phone , opened service mode and selected lte/gsm only , restart , phone asks for sim pin and then nothing , no data sms or calls
Click to expand...
Click to collapse
after enabling lte/gsm only, restart and go to settings > network mode > select lte/wcdma/gsm. try with different carriers and 4G sim cards to get signal (mine is working on Claro only, other carriers show "Searching" or "No service" )
If this is the go25r7wwu3cpc1 how did you root?? I'm on firmware 6.0.1 can't find root anywhere..
mariosota said:
Ok I'll root using the sprint rooting as I've tried this before with success, but first I'll downgrade them to 5.1.1 and hopefully i'll get past this ,since the settings will be set to lte/gsm why wouldn't it work with calls ?
Click to expand...
Click to collapse
you tryed to unlock with z3x box?
g925r7 is currently not listed in Z3X box support list.
need rmt_storage patch to make changes to bands inside the phone.
inside item 1787 (3G GSM bands), this item has no support.
Reason why it doesn't work for calls is because VOLTE is not enabled by default in CSC
usually a device like this will fall back to 3G when making calls on GSM networks. Thus the reason why calls aren't working.
sins07 said:
need rmt_storage patch to make changes to bands inside the phone.
inside item 1787 (3G GSM bands), this item has no support.
Reason why it doesn't work for calls is because VOLTE is not enabled by default in CSC
usually a device like this will fall back to 3G when making calls on GSM networks. Thus the reason why calls aren't working.
Click to expand...
Click to collapse
Sir. Is is possible to make any changes to make it work?