Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
I am sincerely sorry if this is a duplicate thread but I am really struggling with this. I've been at it for about 7 days now, and i'm on the verge of throwing a mega tantrum :silly:
So this is the problem. Fundamentally the screen on my elf turns on, but doesn't go into the startup screen for CM10.
I have recently formatted my PC and most of the guides across Google search say I should install the drivers for this tablet when it is switched on normally, in order to flash new ROMs, but I can't do that.
When I try to turn the device into recovery mode, the PC thinks its an unknown device and NO drivers i've found online seem to work
I will give a donation to people who solve this problem for me!!
Thank you for any help!!!
Ben
ainol_usb_driver.zip
Ben,
Have you googled for ainol_usb_driver.zip and for LiveSuit.exe?
Alt und grau
(suit not suite)
bensegar said:
I am sincerely sorry if this is a duplicate thread but I am really struggling with this. I've been at it for about 7 days now, and i'm on the verge of throwing a mega tantrum :silly:
So this is the problem. Fundamentally the screen on my elf turns on, but doesn't go into the startup screen for CM10.
I have recently formatted my PC and most of the guides across Google search say I should install the drivers for this tablet when it is switched on normally, in order to flash new ROMs, but I can't do that.
When I try to turn the device into recovery mode, the PC thinks its an unknown device and NO drivers i've found online seem to work
I will give a donation to people who solve this problem for me!!
Thank you for any help!!!
Ben
Click to expand...
Click to collapse
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
alex009988 said:
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
Click to expand...
Click to collapse
Congrats on taking the step! You're almost there Maybe the steps in this post of me help you out?
alex009988 said:
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
Click to expand...
Click to collapse
It happens because the driver are unsigned. You can install it by disablIng the drivers signature enforcement control momentarily.
In win 10 hit the maj key and click on restart a menu appear click on Troubleshooting -> advanced options -> parameters->restart. Install the driver and reboot.
Thanks for your help guys. I've finally rooted my tablet and I used windows xp on a virtual machine. I'm also sure that flashtool can be used virtually. It's much better than fighting with windows 10. After all, I did a mistake I flash twrp adb as a kernel and my tablet was finding no way of loading except for tarp, and the screen was untouchable. Nevertheless, I had to connect my pc and twrp and use a command which do fastboot reboot, flash adroplus kernel anew and flash twrp properly. Xmodgames and lockpatcher work well. Xposed haven't tested yet by me.
By the way, what is the difference between "twrp adb" only and "tarp not fixed"? What's better?
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
alex009988 said:
Thanks for your help guys. I've finally rooted my tablet and I used windows xp on a virtual machine. I'm also sure that flashtool can be used virtually. It's much better than fighting with windows 10. After all, I did a mistake I flash twrp adb as a kernel and my tablet was finding no way of loading except for tarp, and the screen was untouchable. Nevertheless, I had to connect my pc and twrp and use a command which do fastboot reboot, flash adroplus kernel anew and flash twrp properly. Xmodgames and lockpatcher work well. Xposed haven't tested yet by me.
By the way, what is the difference between "twrp adb" only and "tarp not fixed"? What's better?
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
Click to expand...
Click to collapse
Ok good:good:
With twrp not fixed you can navigate under twrp with the touch screen fonction
alex009988 said:
Xposed haven't tested yet by me.
Click to expand...
Click to collapse
Please do It's easy to uninstall if it causes problems, but when it works, it opens up so many possibilities.
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
Click to expand...
Click to collapse
Good! I completely agree. Having root access on Android is fantastic.
Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Twink225 said:
Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Click to expand...
Click to collapse
It's hard to understand all of that but it sounds like perhaps you deleted some bloat that you should have, you sound like having driver issues, and possibly wrong TWRP version. Need to clear that up and then reinstall the stock Disney ROM.
I'd start here it has all the tools/TWRP/ROM's you need.
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
So sorry hun, toshiba is driving me nuts and I'm having a bad add moment or three lol. I read about you retiring. so I tried hard not to bother you. now I'm really confused. I've read your nabi2 general info post and even ran across your youtube vids. the problem is I'm not familiar with adb. & the included NabiLabGUI drivers, win10 either fails to finish saying it was interrupted. or it just won't install the 32 bit drivers, I thought I as suppose to use.
The 64bit driver 3 out of 4 install but, I can not get the Google Inc, driver to install properly even with the inf file. (ie the android_winusb.inf ) it says the system can't find the file, it can install the older versions from NabiLabGUI or naked drivers. but doesn't show in add/remove and it still won't detect the tablet most of the time lol.
Pda also has conflicts with adb, I got the nablab disney option to detect it but still failed to install twrp saying it can't find devise and I noticed in device manager 2 driver problems that will not let me update manually or they go missing if I try to force windows to reinstall. (device descriptor request & set address failed)
I must be missing something big, I also tried the 15sec and minimal adb. I assume because the tablet won't fully boot up, windows doesn't know what to do with it. when I tried different cables. windows 10 enterprise won't play nice at all now. so I will format again to be safe but lost what to try next.
I guess my questions should be is there a work around or a full inf version of the newer drivers for NabiLabGUI2015 that might work with this demonic disney nabi2.
&
Is NabiLabGUI compatible with .net framework 4.6 advanced services? (I may have to downgrade o/s. on the nabhacks site is says .net 4.5 is a prerequisites.) I don't know much about the app but saw 4.6 comes preinstalled, I can't install 4.5 yet, I saw there has been compatibility issues. and it won't let you revert versions easily if at all.
I'm to tired of this tab to think straight anymore and so grateful any help I'm in way over my head here.
Update
I lost the battle but I won the war, now google & supersu are messing with me as usual but it boots so I win lol :victory::silly: