[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
Hi to all!
I recently bought this phone, I have to admit to being fully satisfied of the features except for one ... the GPS function.
I have read dozens of guides to adjust the GPS W8+ but not for my model. If I knew how to do the root I could at least try to use the same method.
Does anyone have suggestions on how to do it on this phone?
THL W8 Beyond
Hello, i have also bought a thl w8 beyond and i have the same questions, if anyone could help id be very apreciated!! Thanks
Root
hi,
Motochoper root hack fail on W8 beyond.
THL W8 Beyond:Recovery,Root máy
birdyisme said:
hi,
Motochoper root hack fail on W8 beyond.
Click to expand...
Click to collapse
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Thanks thienhoa
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
thienhoa said:
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Click to expand...
Click to collapse
So I got mine W8 beyond two days ago.
So far so good, but:
1. GPS problem. I am geocacher (more at: geocaching.com) and I need accurate GPS. When I stood still in the open for few minutes, I could see GPS jumping around for 400-900 meters for no reason. AGPS and EPO activated. We will see how it goes
2. I would love to get polish language settings, since there are some apps which fetch the content depending on Your language setting (I know that this is poor design, but this is how they works), so that would be nice. Not an issue anymore. I installed MoreLocale2 and pm'ed it which is more than enough at the moment.
3. I do not see option for sorting the apps in the main apps menu (it was working on my old Lenovo A750) - am I missing something?First 9 icons are fixed and alphabelical, the rest is just alphabetical. I can live with that.
4. I have my contacts stored with country prefix which is not used by my operator. I do not see my contacts data when they are calling me.
The SMSes are provided by operator with country prefix, so the problem is with calls only. I tried to follow this thread http://forum.xda-developers.com/showthread.php?t=2268120 but I am unable to decompile framework.jar - no classes.dex inside. I am not able to deodex framework.odex either, so I am stuck for the moment.GravityMod2 3.0 ROM fixed that problem.
The link provided with the tools and howto contains W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img,
when I go to phone info at my phone I can see W8_beyond.JB2.FHD.EN.COM8P128_MT6589TV1.0.2_20130626.
Seems like I have newer firmware. If anyone can tell me how to extract this, I would be more than happy to share.
GravityMod2 3.0 installed - not an issue anymore
For my good old Lenovo I was able to modify the ROM as soon as I got my hands on any ROM in zip format. I guess I could also try to compile something (I am a programmer), but since I am extremely low on time I would need MT6589T kernel patch (is it the same like mt6589) and some basic manual.
Anyone interested?
Fix GPS
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
thienhoa said:
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
Click to expand...
Click to collapse
Thanks, but I got A-GPS and EPO already enabled and EPO downloaded.
I till try to go to the engineering menu and locking via YGPS.
As I understood from google translator, I should just wait for lock and then close everything. Since then everything should be running smoothly. Am I right?
What about my other questions? Lack of polish is driving my crazy. My news feeds are all US which is driving me crazy ...
w8 beyond dead
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
ilmeccanico said:
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Low_Man said:
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Click to expand...
Click to collapse
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
ilmeccanico said:
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
Click to expand...
Click to collapse
Have You tried reflashing it again with this: ovh.to/GrW17MP?
yes i tried it
Does the GPS works fine on this phone? i would like ot buy this phone....
SICOPOLY said:
Does the GPS works fine on this phone? i would like ot buy this phone....
Click to expand...
Click to collapse
Mine work - kind of ...
After getting the fix the coordinates jumps for 1-2 second every 5 seconds.
This makes it troublesome but possible for navigation
what SAR rating for thl w8 beyond?
Anyone knows how can you root the latest 1.0.2 w8 beyond version?
Getting "Incorrect scatter file format" error
birdyisme said:
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
Click to expand...
Click to collapse
Hi,
Thanks for this great tutorial and for arranging all the needed files in one location!
I have a small problem
1. When I open the flash tool I get the following error: "fail to load a raw data file: "c:\users\stephane\Desktop\thl8beyond\W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img
2. When I continue the falsh tool opens but when I try to upload the scatter file I get the following error: "Incorrect scatter file format!"
3. My current build number is: W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.2_20130626. Can I still use the image you provided ?
Thanks a lot in advance!
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
lepsulet said:
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
Click to expand...
Click to collapse
The easiest and only way i could root my W8 beyond is with this program:
droidchina.com/forum/Thread-ROOT-GUI-Root-Wizard-for-MTK65xx-phones
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
alex009988 said:
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
Click to expand...
Click to collapse
Congrats on taking the step! You're almost there Maybe the steps in this post of me help you out?
alex009988 said:
Dear friends!
I finally decided to say goodbye to my drm keys and root my tablet. But the problem is adb comand line was waiting my device for ever. Thus, I started to investigate my problem. Finally. I've understood thet the very wanted driver is not installed when I took a look at "S1Boot fastboot" device. As I've understood the android_winusb provided by sony is not enough to install driver successfully. You should put android_winusb into this thing http://developer.android.com/intl/ru/sdk/win-usb.html as I did. But my windows 10 x64 tells me that it found a driver but encountered a problem. So what should I do? Please, help me out.
PS I don't wonna install giant-full android studio, because it's too huge and takes a lot of time to be installed
Click to expand...
Click to collapse
It happens because the driver are unsigned. You can install it by disablIng the drivers signature enforcement control momentarily.
In win 10 hit the maj key and click on restart a menu appear click on Troubleshooting -> advanced options -> parameters->restart. Install the driver and reboot.
Thanks for your help guys. I've finally rooted my tablet and I used windows xp on a virtual machine. I'm also sure that flashtool can be used virtually. It's much better than fighting with windows 10. After all, I did a mistake I flash twrp adb as a kernel and my tablet was finding no way of loading except for tarp, and the screen was untouchable. Nevertheless, I had to connect my pc and twrp and use a command which do fastboot reboot, flash adroplus kernel anew and flash twrp properly. Xmodgames and lockpatcher work well. Xposed haven't tested yet by me.
By the way, what is the difference between "twrp adb" only and "tarp not fixed"? What's better?
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
alex009988 said:
Thanks for your help guys. I've finally rooted my tablet and I used windows xp on a virtual machine. I'm also sure that flashtool can be used virtually. It's much better than fighting with windows 10. After all, I did a mistake I flash twrp adb as a kernel and my tablet was finding no way of loading except for tarp, and the screen was untouchable. Nevertheless, I had to connect my pc and twrp and use a command which do fastboot reboot, flash adroplus kernel anew and flash twrp properly. Xmodgames and lockpatcher work well. Xposed haven't tested yet by me.
By the way, what is the difference between "twrp adb" only and "tarp not fixed"? What's better?
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
Click to expand...
Click to collapse
Ok good:good:
With twrp not fixed you can navigate under twrp with the touch screen fonction
alex009988 said:
Xposed haven't tested yet by me.
Click to expand...
Click to collapse
Please do It's easy to uninstall if it causes problems, but when it works, it opens up so many possibilities.
PS After all, I'm happy with the root, I bought an android device not in order to be without root. Sony album application works as well as it was
Click to expand...
Click to collapse
Good! I completely agree. Having root access on Android is fantastic.