No root access. Need help - Motorola Droid X2

Ok I used the directions posted on this site to sbf back to froyo which I did I then did bootstrap and gingerbreak. I got the error message at the end. I do have the super user app and I did download barnacle and root check. Both say that I do not have root access. I purchased the tbh app and have it on my phone but not sure which app to use inside the tbh app. Im currently running gb but its not the ota update. This is on a Dx2
Should I sbf back to froyo and start over or will the blackhat app save me from doing that. Just trying to get this thing rooted and appreciate the help.

Related

[Q] Update

Hi,
Firstly, I am a noob when it comes to "messing" with Android (Rom, root, etc.)
My Atirx is running Android 2.2.1, system version 4.1.26
It's from AT&T US, unlocked and rooted.
I got a system message to update to 4.1.57
At some point it just downloaded the update for me and now keeps asking me to install.
I will install of course but before that, I have a few questions:
1) Will it unroot the phone?
2) Will it re-lock the phone?
3) Will I then get the 1.83 update?
If I can simply click "Install" and everything will be alright - great. if not, what do I need to do?
Thanks!
It will unroot your phone you will not lose unlock and yes you will be prompted for 1.83. Now if you want to retain root you need to root using gladroot and do not run "afterupdate.bat" until you have updated all the way to 1.83. hope that helps
But thats just my 2 cents
Sent from my Atrix
Another option is to just let it update normally then run gingerbreak. It will re-root the phone and install SU. The above method will work just the same, and both require about the same amount of time and effort.
Also with gingerbreak a lot of users have reported complete wipe of their phone after using it. So if gingerbreak is the route you take make sure to backup everything.
But thats just my 2 cents
Sent from my Atrix
drock212 said:
Also with gingerbreak a lot of users have reported complete wipe of their phone after using it. So if gingerbreak is the route you take make sure to backup everything.
But thats just my 2 cents
Sent from my Atrix
Click to expand...
Click to collapse
To clarify, Gingerbreak does not wipe the phone, it wipes the internal SDCard.
I would update OTA to 4.1.83, then Gingerbreak for root, then Gladenable for sideloading, and install Tenfars CWM.
lost
ok, now you really lost me
is there somewhere I can find a "for dummies" guide on how to get my phone to 1.83 with all my data + keeping it rooted and unlocked, along with download links to whichever tools I will need?
Thanks!
There is. Will post link when I get home unless someone else does first.
Beamed in from WinBorg 4G via XDA Premium app
Atrix Rooting & Flashing Guide
Gingerbreak
Gladenabler
Nothing simpler?
Now that seems scary.
I want to keep the phone without custom ROMs for now
Can't I just use the auto system updates to get up to 1.83 and then root with SOC or GladRoot?
Thanks, and sorry for being difficult. I just REALLY dont wanna mess up the phone
mickeycohen said:
Now that seems scary.
I want to keep the phone without custom ROMs for now
Can't I just use the auto system updates to get up to 1.83 and then root with SOC or GladRoot?
Thanks, and sorry for being difficult. I just REALLY dont wanna mess up the phone
Click to expand...
Click to collapse
You sure can.
OTA to 4.1.83, then use Gingerbreak to root.
Alternatively, if you want to use Gladroot so you don't wipe your internal SDCard, (which you can back up anyway by copy/paste everything on your internal SDCard to your PC, then just copy/paste it all back after), then you will have to start the Gladroot process before updating to 4.1.83 per the instructions.
DO NOT use SuperOneClick..............it doesn't work with 4.1.57 or 4.1.83.
OK, I have downloaded GingerBreak from here:
http://forum.xda-developers.com/showthread.php?t=1044765
Now this might sound stupid, but is this system update for Gingerbread?
Do I need to download drivers for the device?
One last thing, what should I use to backup and restore my data? (and will it also backup apps, games, etc.)
Phone is updated and not rooted
OK, funny story.
I set an alaram clock for this morning and when I woke up and tapped the phone for snooze, I tapped "Install Now" on the new version pop-up...
So I updated all the way to 1.83 and now my phone is not rooted and I cannot use Backup Root.
Back to my previous questions, how should I backup my data, applications and applications data?
Do I need any special drivers etc in order to use GingerBreak?
Oh, and SuperUser is installed. Should I uninstall it first?
The phone is not GingerBread. Is it still ok to run GingerBreak?
Thanks
mickeycohen said:
OK, I have downloaded GingerBreak from here:
http://forum.xda-developers.com/showthread.php?t=1044765
Now this might sound stupid, but is this system update for Gingerbread?
Do I need to download drivers for the device?
One last thing, what should I use to backup and restore my data? (and will it also backup apps, games, etc.)
Click to expand...
Click to collapse
Look at the bottom of the OP from my Gingerbreak link. There is a link to a Gingerbreak.exe which you run on your computer while your phone is connected wuth USB Debugging On. This will install Gingerbreak on your phone and you will see it in your application list from where you can run the app and get root.
We do not have Gingerbread yet. We are still on Froyo.
Download Motohelper from Motorola and all the required drivers should install when you connect your phone to your PC after that.
Backup your internal sdcard using copy/paste, then copy and paste everything back after you use Gingerbreak.

[Q] Rooting & Recovery with OTA 2.3.3.?

Please bear with me here if this sounds like a noob question ...
After the OTA update failed on my DX2 (and that after a total defrost and factory reset) I managed to convince Vz tech support to replace the phone. First thing I did after activating was to download and install the OTA 2.3.3.
I then tried to install the DX2 recovery that c21johnson described in another thread, but can't get it to install. Any help?
I also would like to know if I can somehow install the pre-rooted GB AFTER the OTA install has gone through. Everything I see has the install starting from 2.2.2. Am I missing something?
Apologies for all the dumb questions.
Ok that recovery app requires root, they patched this 2.3.3 so gingerbreak doesn't work. Currently the only way ti get root is to go back to 2.2.2, will put link up 1 second
Edit: http://forum.xda-developers.com/showthread.php?t=1193818
Sent from my DROID X2 using XDA App

[Q] Can someone tell me what i did wrong?

I did something wrong, i understand this, i have looked all over for the answer (YouTube, Google, Here, ECT.) and i haven't come up with anything, so here it goes. Shortly after buying my Droid X2 I used Gingerbreak 1.2 (on Android 2.2 Froyo) and rooted it without any problems. Later Verizon told me there was an update so i clicked it and it installed Android 2.3.3. Superuser is still present in my app launcher but i cant do things like use root explorer or file expert to change file permissions to R/W. I used Gingerbreak again to see if i could re install SU but it wont give me the option to uninstall it and if i try to install it never finishes. I am really trying to install the Eclipse ROM but i need to get over this issue first. I know I did something wrong, i just don't know what. Please help.
CptHoovsen said:
I did something wrong, i understand this, i have looked all over for the answer (YouTube, Google, Here, ECT.) and i haven't come up with anything, so here it goes. Shortly after buying my Droid X2 I used Gingerbreak 1.2 (on Android 2.2 Froyo) and rooted it without any problems. Later Verizon told me there was an update so i clicked it and it installed Android 2.3.3. Superuser is still present in my app launcher but i cant do things like use root explorer or file expert to change file permissions to R/W. I used Gingerbreak again to see if i could re install SU but it wont give me the option to uninstall it and if i try to install it never finishes. I am really trying to install the Eclipse ROM but i need to get over this issue first. I know I did something wrong, i just don't know what. Please help.
Click to expand...
Click to collapse
sbf back to froyo then root it then flash the prerooted gingerbread image then install system recovery and use that to flash eclipse
Ive tried this, and ive tried to fallow the Tutorial for this (Here: http://forum.xda-developers.com/showthread.php?t=1193818). Problem is when i factory reset and try to re-root with Gignerbreak it never roots. It just stays on the "Rooting device, this may take a few minutes" window. But i will try again.
You can't use ginger break on 2.3.3, do a google search for "DROID 3 one click root", it was made for the DROID 3 but will work on the x2 running 2.3.3, and you don't have to sbf for this method.
Thanks for the help, after 3 days of research it only took about 30 minutes for you guys to help and get it working! one last question, what is everyone's recommended ROM for the X2?
Eclipse is a good one, with lots of themes. Also check the x2 development thread, there is a 2.3.4 rom ported from the atrix, and there should be more on the way.
I am running eclipse .5 and it is smooth. No issues at all.
Sent from my DROID X2 using XDA App

Lost superuser privelages after flashing this update

I flashed this http://www.filefactory.com/file/cfbc5d2/n/update_1024_working_data_zip over stock rom i am unlocked and was rooted with djbliss one click method now root rights are gone
Sent from my MB855 using XDA Premium App
Troubleshoot that a couple of ways. First, go into the market, and download rootchecker by joeykrim. That should tell you if you somehow lost root. If you did, root again, I actually prefer photon torpedo method found in these forums.
If you still have root, go the market and download superuser. If you are showing that you still have root, and that superuser is installed, then you should be good, if not, then I would re-root with photon anyway.
I too lost root when I went back to 154....got the OTA to 198_6 then I re-rooted with AIO...all is good now

[Q] Preferred root method for Bell Atrix 2.3.6 [A] Manual way

Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.

Categories

Resources