after flashing cm7 pre beta #2 for the atrix my for just sits in the motorola bootlogo. I can get back to recovery mode but I dont have any backups to restore from. Ive whipped the data and cache and reflashed it but it dont fix it. Is there a way to facotory restore or other options?
Thanks for any help
NWilz said:
after flashing cm7 pre beta #2 for the atrix my for just sits in the motorola bootlogo. I can get back to recovery mode but I dont have any backups to restore from. Ive whipped the data and cache and reflashed it but it dont fix it. Is there a way to facotory restore or other options?
Thanks for any help
Click to expand...
Click to collapse
Did you wipe the dalvik cache? If you didn't, go into recovery, then click advanced, then click wipe dalvik cache.
i whipped dalvik cache, still sits in the boot logo
NWilz said:
i whipped dalvik cache, still sits in the boot logo
Click to expand...
Click to collapse
Maybe you've had a bad install. Try wiping everything again, and then re-installing. After you've reinstalled, wipe everything again just for good measure.
This happened to me before, just download CM7 again onto your sd card and then go into your recovery menu and wipe dalvik, wipe cache, wipe data, then try reflashing the new CM7 zip you have on your sd card and reboot
Sent from my MB860 using Tapatalk
I think this maybe my problem
http://forum.xda-developers.com/showthread.php?t=1219956
cause I can only access my internal memory, but I have a bigger problem it says my battery is to low to flash and it doesnt seem to be charging. Iis there any mode under those options when you hold power and down volume that would charge the phone?
Try the method I posted on that thread to charge your phone, its a video on youtube that tells you how to.
Related
I have just flashed my Galaxy 5 with Cyanogenmod latest and it is now stuck on a reapeating splash screen of a little blue droid guy, its not doing nothing i cant access my phone as it wont advance from this splash screen, i have removed my battery but nothing has worked.
Any quick tips/fix please?
have you wiped data, cache, and dalvik cache?
I havent a clue what you mean so i'm guessing not aha:/
whats your custom recovery?
for amonra, there should be an option called wipe and it has everything i just said.
for clockworkmod, theres wipe data/factory reset, wipe cache partition, and under advanced, theres wipe dalvik cache
I am not 100% positive but i used Clockworkmod v4 in order to get Cyanogenmod 7 onto my device if that answers your question? (im new to all this stuff).
All ive did is;
Installed clockworkmod v4
rebooted my device.
installed cyanogenmod as a zip from my sd card
rebooted my device.
Turned it back on and just this splash screen repeating
Im sorry i suck at this aha
with your phone off, hold home+vol down+power.
when it boots into clockworkmod, on the first menu, there should be an option to wipe data/factory reset and another one to wipe cache. do both.
then after you are done with that, go into the advanced menu and select wipe dalvik cache. now reboot
When i hold that combination down it brings up Download mode for some reason :S
oh yeah. my bad i was thinking about my phone.
try reinstalling the recovery (using odin) and see if it boots back into recovery (do this at your own risk; since i dont have a phone that uses odin, im not sure if this will work or not)
Could this damage/brick my phone?
Thank you so so so so much sir! Id take my hat off for you, if i wore one!
I love you.
im guessing it worked, right?
no problem
Yes ahah, longest 3 minutes in my life though! Thanks alot.
So I installed CM7 Beta and now I'm stuck in the splash screen.
So the CM7 screen keeps repeating itself.
Can someone help me get out of this?
do a bettery pull. wipe cache wipe dalvik and factory reset, if that doesnt work re install,
marko! said:
do a bettery pull. wipe cache wipe dalvik and factory reset, if that doesnt work re install,
Click to expand...
Click to collapse
How do i do that. I havent been using my phone in a while
also make sure you're using either the most up to date CWM from Rom Manager or the most up to date version of Romracer's recovery
most ppl who run into the bootloop problem with cm7 install forget to wipe data/factory reset...make sure u boot into recovery and do that.. on the latest CWM it's the 3rd option down
PEOPLE:
How do I get to the place where I can wipe the memory or clear cache? Is it Power+Vol Down?
yeah it power then hold volume down untll you see fastboot. then hit volume down untill you see android recovery, then hit volume up
YES! Got it working.
Thanks for all of those who helped!
Im glad it was that easy
Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.
Just got a new EvoLTE, it's rooted, unlocked, S-Off and has TWRP. I wiped the cache and the Dalvik and tried to install Paranoid Android. My phone boots up to the Rom Logo but is stuck. Am I missing something? How do I boot into recovery since this phone doesn't have a removable battery?
funkatronic said:
Just got a new EvoLTE, it's rooted, unlocked, S-Off and has TWRP. I wiped the cache and the Dalvik and tried to install Paranoid Android. My phone boots up to the Rom Logo but is stuck. Am I missing something? How do I boot into recovery since this phone doesn't have a removable battery?
Click to expand...
Click to collapse
Hold the power button down until it does a hard shut down. Then hold volume down and power and it should put you into hboot and give you the option to select recovery.
Once in recovery you will want to wipe Cache and Dalvik Cache X3 (just what i do)
then do a factory reset and system reset
Than flash rom and see how that goes.
Worked like a charm. Thanks a bunch.
funkatronic said:
Worked like a charm. Thanks a bunch.
Click to expand...
Click to collapse
NP! Glad I could be of assistance!
Okay, ran into the same issue trying to install a battery mod. Stuck on the boot animation again. Dow I wipe x3 and try to re-install the mod do I have to start from scratch again?
funkatronic said:
Okay, ran into the same issue trying to install a battery mod. Stuck on the boot animation again. Dow I wipe x3 and try to re-install the mod do I have to start from scratch again?
Click to expand...
Click to collapse
Did you flash battery mod from sense on aosp rom? If yes, then you have to start from scratch. You have to be more specific on what mod you flashed. You have to wipe cache and dalvik cache before flashing any mod.
Sent from my lair.
hey guys, i tried to go into recovery and wipe cache before the new update hits, and it will not wipe. i reset it and it wont turn on, went back into recovery and theres loads of cache errors like cant mount etc
any way of getting it to turn on at least? going to let try and wipe over night, see what happens
thanks
JackHanAnLG said:
hey guys, i tried to go into recovery and wipe cache before the new update hits, and it will not wipe. i reset it and it wont turn on, went back into recovery and theres loads of cache errors like cant mount etc
any way of getting it to turn on at least? going to let try and wipe over night, see what happens
thanks
Click to expand...
Click to collapse
I would suggest booting to boot loader. Then....
Fastboot format cache
Fastboot format user data
Fastboot reboot
Note that this will wipe your SDcard and data.