[Q] 3g APN settings For Airtel - Galaxy Ace S5830 General

recently i took Samsung galaxy ace.. overall cell is good but i wont understnd wats the problem with my 3g connection i tried Idea and Vodafone in my cell for 3g after recharging i immediately got 3g signal but cant understand wats wrong with Airtel 3g i m not getting its Signal only in my cell ,but when try it on some other mobile in same area i immediately get same signal...
So i want to know working apn settings for airtel 3g ... or is there is any facility of buying new airtel sim card by keeping same current Number!!

Settings>Wireless and networks>Mobile networks. Make sure "Use only 2G networks" is untick. Btw getting 3g signal doesnt related with apn setting at all. And regarding buying a new sim while keeping the old number, do contact ur service provider itself.
Sent from your phone

Hi mate,
I'm from India too..
The settings for Airtel 3G and normal GPRS are the same.
Just pay for a 3G pack and also try what this guy said :
an0nym0us_ said:
Settings>Wireless and networks>Mobile networks. Make sure "Use only 2G networks" is untick. Btw getting 3g signal doesnt have any relationship with apn setting. And regarding buying a new sim and keeping the old number, do contact ur service provider itself.
Sent from your phone
Click to expand...
Click to collapse
That should work,
If its still not working Just dial 198

Related

[Q] Data working on foreign carrier?

Hello there just want to make sure is this phonr working on vodafone New Zealand?
A local website says the phone only support vodafone 2G
Vodafone's mobile network operates on the following frequencies:
A 2G GSM voice network on 900/1800MHz (almost every GSM mobile should work on these frequencies)
A 2G GPRS data network on 900/1800MHz
A 3G UMTS data network for voice, video calls and data on 2100MHz
A 3G HSDPA network on 2100MHz
I know in some places voice call and sms are working, not the 3G data
http://www.motorola.com/Consumers/U...Mobile-Phones/ci.MOTOROLA-PHOTON-4G-US-EN.alt
This might answer your question. But looks like it should work on 3g
Sent from my MB855 using xda premium
Watch out, though, people have reported it's not possible to enter customized APNs on the Photon due to Sprint's software customizations. This is necessary for some foreign carriers to have data access.
pgill34 said:
http://www.motorola.com/Consumers/U...Mobile-Phones/ci.MOTOROLA-PHOTON-4G-US-EN.alt
This might answer your question. But looks like it should work on 3g
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
manekineko said:
Watch out, though, people have reported it's not possible to enter customized APNs on the Photon due to Sprint's software customizations. This is necessary for some foreign carriers to have data access.
Click to expand...
Click to collapse
Shall I just give it a try? It is a lot of money though
My Photon works fine. I'm using it here in the Philippines...
3G is 2100 over here.
Bought it on eBay sealed and untouched. So when I took it out, inserted my SIM, and turned it on, it was trying to get on the Sprint network to activate. Since that wasn't going to happen, I just let it be. Soon enough it got tired and displayed a screen saying activation failed. I clicked OK and then it let me continue onto the phone where I changed the network settings.
I set mine up to "Any GSM/UMTS" and immediately it recognized the new network. I created a new APN to test data and it worked.
The only thing I hate is that whenever I reboot the phone, it always tries to activate. I think maybe I should delete Sprint Zone so that it stops doing that...

[Q] Tata Docomo 3G

As we all indians know, tata docomo has even stopped providing 3g network to those who have not subscribed to a 3g net plan... i was wondering if anyone has managed to break through?
2G speeds are very bad here.
Wrong section mate
Go to Carrier Discussion. No network crashing, MODs may issue a warning.
Sorry
Oh I am sorry brother . Apologies. I request the moderator to delete this thread.
Perhaps a gud news : )
I think docomo has started again giving 3g speed..I have used it 2 days ago in 3g nd many have confirmed that they have also got 3g speed..
sam_0829 said:
I think docomo has started again giving 3g speed..I have used it 2 days ago in 3g nd many have confirmed that they have also got 3g speed..
Click to expand...
Click to collapse
Oh then it seems I am the one unlucky guy
is there any trick to enable 3g mode? I mean when switched to 3g, d does not show any coverage, but when I take a look at the signal values, there is a network. but somehow it does not show...
No man i didn't do anything else for getting 3g network...i just selected wcdma mode...
U can try enabling data roaming, may be that work....
sam_0829 said:
No man i didn't do anything else for getting 3g network...i just selected wcdma mode...
U can try enabling data roaming, may be that work....
Click to expand...
Click to collapse
Even that' not working for me... tried *√

no 3g signal

Hey guys am having pit of a problem am picking up a 2g signal but no 3g at all in city centres an places were i normally pick up a 3g signal an i have not changed any of the settings an ive been sttod next to friends on same network an they have had full 3g network anyone got any ideas taken battery out taken sim card in an out an tued mobile network on an off nothing
lilchrissyy said:
Hey guys am having pit of a problem am picking up a 2g signal but no 3g at all in city centres an places were i normally pick up a 3g signal an i have not changed any of the settings an ive been sttod next to friends on same network an they have had full 3g network anyone got any ideas taken battery out taken sim card in an out an tued mobile network on an off nothing
Click to expand...
Click to collapse
Check in "Mobile networks" if "Use only 2G" (or "GSM only" in that case take WCDMA) is unchecked. If that doesn't solve problem, tell us which ROM you use, kernel etc..sys info
Sent from my Evo 3D GSM using xda premium
PROleev said:
Check in "Mobile networks" if "Use only 2G" (or "GSM only" in that case take WCDMA) is unchecked. If that doesn't solve problem, tell us which ROM you use, kernel etc..sys info
Sent from my Evo 3D GSM using xda premium
Click to expand...
Click to collapse
Follow this, if it doesn't work, your APNs may be messed up.

[Q] Toggling between 3G network to Edge

I am having this peculiar problem that i am facing while using mobile data. I m using reliance network. When i have set the mobile data to 3g, it seems to run on edge network even though the network is full. Why this is so? Anybody can help?
hhmmk said:
I am having this peculiar problem that i am facing while using mobile data. I m using reliance network. When i have set the mobile data to 3g, it seems to run on edge network even though the network is full. Why this is so? Anybody can help?
Click to expand...
Click to collapse
You've got to activate 3G on Reliance first...
Some providers do not preactivae 3G on the sims...
FYI, on Aircel u've got to send a text START 3G to 121 to start using 3G..
Check with your provider whether they've got some provisions like this...
Just check whether there is any E icon on the network icon or is it showing 3G/H+???
The latter shows that 3G is activated...
Hope this helps... :good:
hhmmk said:
I am having this peculiar problem that i am facing while using mobile data. I m using reliance network. When i have set the mobile data to 3g, it seems to run on edge network even though the network is full. Why this is so? Anybody can help?
Click to expand...
Click to collapse
Some Times 3g network doesn't work specially on reliance even i also faced such problem but not more than 1min . u can try manual network selection or by restarting ur device.:good:
g33kparineeti said:
You've got to activate 3G on Reliance first...
Some providers do not preactivae 3G on the sims...
FYI, on Aircel u've got to send a text START 3G to 121 to start using 3G..
Check with your provider whether they've got some provisions like this...
Just check whether there is any E icon on the network icon or is it showing 3G/H+???
The latter shows that 3G is activated...
Hope this helps... :good:
Click to expand...
Click to collapse
here i find the Reliance network is not providing the service for what the user is using. if one has enabled all the activation process, why it should not start with the 3g network directly even if the signal is poor.
hhmmk said:
here i find the Reliance network is not providing the service for what the user is using. if one has enabled all the activation process, why it should not start with the 3g network directly even if the signal is poor.
Click to expand...
Click to collapse
Check the icon on your network bar and report back what you're seeing???
E or 3G/H+???
Until you mention hat I can't help ya...
g33kparineeti said:
check the icon on your network bar and report back what you're seeing???
E or 3g/h+???
Until you mention hat i can't help ya...
Click to expand...
Click to collapse
signal shows 'e' then after 4 to 5 minutes it shows h+ inspite of having full network
hhmmk said:
signal shows 'e' then after 4 to 5 minutes it shows h+ inspite of having full network
Click to expand...
Click to collapse
That's because the area where you're at present does not has 3G coverage...
This happens to any network...
If you go out of 3G coverage region or reach the fringes, this occurs...
3G problem on Moto E
I'm using the Motorola Moto E - Global GSM - Unlocked - 4GB (Black) sold on Amazon.
I relative of mine coming in from UK brought it for me.
I have been using it for 2 days in Mumbai and my carrier is Vodafone.
The problem is that i am unable to connect to 3g on my handset no matter what I do. I have accessed the Supermenu and tried using the WCDMA only option in which i was unable to connect to any network at all and the GSM option only Gives me EDGE as my network type. I know it is a Handset issue and not a carrier issue as i tried my SIM card in an Samsung Galaxy S4 and was able to use H+ network.
I am new on this forum so if you guys could help me i'd be really grateful.

[Q] Help about using HSPA

Hi all!
Im using a moto E with Tata Docomo sim.
The problem is that when I change my network mode to WCDMA only, the phone shows only 3G and not H+. However, when I go out of my home, I get H+ with full signal.
I've talked to customer care and the issue is that another cell tower which doesnt support HSPA is stronger in my home so the phone connects to it and only shows 3G even when data transfer takes place. 3G is so much slower than HSPA/HSPAP.
Is there any way I can force my phone to connect to HSPA/HSDPA only?? I dont mind if the signal drops a little. Since it is possible to force the phone to using 3G only, I thought forcing to 3.5G could also be done
Also my phone is rooted so changing any system file is not a problem.
Please help..
Thank you.

Categories

Resources