can someone who has this case post a review on it, i just ordered mines on amazon, and i want to know if it will fit any of the old spring clip seidio holsters that i have laying around...
It most likely won't fit. Each phone has different dimensions and I tried my 3D on my evo holster and it was too big.
Sent from my rockin 3D
blu3poptart said:
It most likely won't fit. Each phone has different dimensions and I tried my 3D on my evo holster and it was too big.
Sent from my rockin 3D
Click to expand...
Click to collapse
well actually my naked 3d with the extended battery fits the OG evo pring clip holster for the OG surface case. so if its like that im thinking that the extended active case will fit in the normal convert spring clip holster(fingers crossed)
I recently purchased the 4000 mah extended battery and a convert case and the convert works with my old EVO 4g rugged holster. Its not a perfect fit but close enough.
Related
I just got the EVO 3d and tried my old innocase clip from Seidio for the EVO 4G on it and it seems to work OK - at least until the new clip for the 3D comes out (I always use Seidio clips - they are the best and don't break).
Now of course this is the EVO 4G Clip for an innocase equipped EVO 4G....put on a EVO 3D with out any case....it is a bit too wide but doesn't move much, and it seems to be ok/work height wise.
How about a picture?
Syclone2530 said:
I just got the EVO 3d and tried my old innocase clip from Seidio for the EVO 4G on it and it seems to work OK - at least until the new clip for the 3D comes out (I always use Seidio clips - they are the best and don't break).
Now of course this is the EVO 4G Clip for an innocase equipped EVO 4G....put on a EVO 3D with out any case....it is a bit too wide but doesn't move much, and it seems to be ok/work height wise.
Click to expand...
Click to collapse
pics plz
10char
Thunderbolt
Also works with the Thunderbolt seidio holster, which i believe is the same as the Evo holster but not positive, its a little snug but it does the job. camera button/switch has enough room with an extra couple mm to spare.
I'm surprised there are so few accessories out for this phone so far. I am usually able to find a holster and have it onhand before I have the actual phone, but not this time unfortunately. I got the one from Sprint for now that has the case and slide in belt holder but I strongly prefer the spring clips like the ones Seidio makes and bestbuy carries.
Has anybody been able to find a belt clip for the Photon yet aside from the one sprint has? i couldn't even find a generic one available at all. I'm so used to the spring clip holster that i've almost dropped my phone multiple times already
I'm currently using the Otterbox Defender and its a solid case that comes with an adjustable belt clip. Here is a link to the manufacturer's site: http://tinyurl.com/otterboxphoton
codee said:
I'm surprised there are so few accessories out for this phone so far. I am usually able to find a holster and have it onhand before I have the actual phone, but not this time unfortunately. I got the one from Sprint for now that has the case and slide in belt holder but I strongly prefer the spring clips like the ones Seidio makes and bestbuy carries.
Has anybody been able to find a belt clip for the Photon yet aside from the one sprint has? i couldn't even find a generic one available at all. I'm so used to the spring clip holster that i've almost dropped my phone multiple times already
Click to expand...
Click to collapse
Put it in your pocket and not be a goober with a belt clip.
i modded (a peice of velcro) the innocase holster from my evo 4g and it fits great. I think it has to do with the fact the photon is taller than the evo 4g.
phenixdragon said:
Put it in your pocket and not be a goober with a belt clip.
Click to expand...
Click to collapse
I find it inconvenient to remove it from my pocket 200+ times a day when i can just snap it in and out of a holster much quicker. So I'll keep on being a goober thank you. If i didn't use my phone a pocket would work awesome though.
Sent from my MB855 using XDA Premium App
Glod said:
i modded (a peice of velcro) the innocase holster from my evo 4g and it fits great. I think it has to do with the fact the photon is taller than the evo 4g.
Click to expand...
Click to collapse
Thank you! I will try to mod my original evo holster and will also try a otterbox as well.
Sent from my MB855 using XDA Premium App
So far I am liking the Sprint holster better than the spring clip one I had with my Epic. I broke a screen on my Epic because of the spring clip getting hit and the phone falling out. I don't see that happening with this case.
I'm also liking the sprint holster combo.... It fits in the hd dock with the holster on too!
Sent from my MB855 using Tapatalk
kkwus74 said:
I'm also liking the sprint holster combo.... It fits in the hd dock with the holster on too!
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
I'm replacing that holster combo with an Otterbox Commuter, that stupid Sprint case doesn't protect the top or bottom of the phone. In my experience, the phone always ends up falling on uncovered parts head first, so I'm not going to chance it.
not to kick a dead kitten but does anyone know if this holster combo from sprint will fit in the docks with the shield on? there havent been any avail in local stores to test fit with them...
I have both the desktop dock and the car dock systems. If you have the Sprint case/holster combo, you remove inserts from the docks. If you use a "naked" Photon, keep the inserts in the docks. I really like these docks...they work really really well.
Can't wait for the "lapdock" to hit the market. That's gonna be sweet.
Looking for a good leather holster (horizontal or vertical) with a spring clip. I have thought about grabbing one for evo or 3vo, but worried because the Photon is a bit thicker. Anyone come across anything?
I'm using the leather horizontal holster for the 3vo and it works fine. Not spring loaded but that wasn't on my search criteria.
Cheers,
Sent from my MB855 using Tapatalk
http://store.androidcentral.com/motorola-photon-4g-leather-cases.htm
http://www.amazon.com/gp/product/B0038YYSN0
I had this one for my evo with extended battery and it still fits the photon just fine...it is great...hell it might even fit it with a case on. Not sure, just got my photon today
stricklerjosh said:
http://www.amazon.com/gp/product/B0038YYSN0
I had this one for my evo with extended battery and it still fits the photon just fine...it is great...hell it might even fit it with a case on. Not sure, just got my photon today
Click to expand...
Click to collapse
+1 i had the case too, it fitted my phone with a TPU case but its very big for my taste. you can probably fit the epic touch 4g in it with ease too lol
I bought the otterbox commuter for my new evolte because i thought the defender looked too big. Anyone know if there is a belt clip holster that will work with this case? I prefer to not carry the phone in my pocket.
I was wondering the same thing. I love this case, but need a clip. I'm going to email them tomorrow
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
I was wondering the same thing. I love this case, but need a clip. I'm going to email them tomorrow
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
b
Cool, let me know what you hear!
Anyone who's interested should email them so they can see if there's demand
Sent from my EVO LTE using Tapatalk 2
I think your best options would be to try the seidio active or convert holders. I'm not sure that these will work, just merely giving suggestions to try to point you guys in the right direction. I'm using the diztronic tpu case and it works wonderfully with the seidio surface holster. Go to seidio.com and take a look. The surface is for minimal protection, the active is a little thicker with a slightly bigger holster and the convert offers the most protection which requires a bigger holster. They do sell the holsters separately. Also, they have a coupon code for 15% off and free shipping, I believe it Is dad2012 or something along the lines of that, Google it you will find it.
Wow sounds like an advertisement when re reading ha!
Sent from my aokp_tenderloin using XDA Premium App
yayyay said:
I think your best options would be to try the seidio active or convert holders. I'm not sure that these will work, just merely giving suggestions to try to point you guys in the right direction. I'm using the diztronic tpu case and it works wonderfully with the seidio surface holster. Go to seidio.com and take a look. The surface is for minimal protection, the active is a little thicker with a slightly bigger holster and the convert offers the most protection which requires a bigger holster. They do sell the holsters separately. Also, they have a coupon code for 15% off and free shipping, I believe it Is dad2012 or something along the lines of that, Google it you will find it.
Wow sounds like an advertisement when re reading ha!
Sent from my aokp_tenderloin using XDA Premium App
Click to expand...
Click to collapse
Maybe I'll give that a shot. I always used Sedio cases in the past, but didn't like the covered/extra kickstands, so I went with the OtterBox
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Maybe I'll give that a shot. I always used Sedio cases in the past, but didn't like the covered/extra kickstands, so I went with the OtterBox
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
Here is some info I gathered for the various Seidio and Otterbox cases:
Seidio cases: I got this info directly from Seidio chat.
The ACTIVE case is : 5.5 x 2.9 x 0.6 inches
The CONVERT case is 5.8 x 3.2 x 1.8 inches
Otterbox cases: From otterbox website
Defender DIMENSIONS: 5.66 in x 3.08 in x .068 in
146.51 mm x 85.67 mm x 37.36 mm
Commuter case ??? still don't know, it is not posted on the website.
Judging by the info I gathered, is really hard to say which holster would "fit better" as I have no idea how the compatibility is and the dimensions are rather close. If you guys are able to get the dimensions of the Commuter, I think you can make a guess which holster would fit better. Good luck!
I am really curious as to what would work as well because when I got my evo 3d last year I had the exact same question. In the end I just went with a Surface combo and purchased a TPU case as back up. It Just to turned out that the TPU case fit perfect in the Seidio Surface holster. I liked the combo so much, I am doing the same for the Evo LTE, Diztronic TPU with Seidio Surface holster.
yayyay said:
Here is some info I gathered for the various Seidio and Otterbox cases:
Seidio cases: I got this info directly from Seidio chat.
The ACTIVE case is : 5.5 x 2.9 x 0.6 inches
The CONVERT case is 5.8 x 3.2 x 1.8 inches
Otterbox cases: From otterbox website
Defender DIMENSIONS: 5.66 in x 3.08 in x .068 in
146.51 mm x 85.67 mm x 37.36 mm
Commuter case ??? still don't know, it is not posted on the website.
Judging by the info I gathered, is really hard to say which holster would "fit better" as I have no idea how the compatibility is and the dimensions are rather close. If you guys are able to get the dimensions of the Commuter, I think you can make a guess which holster would fit better. Good luck!
I am really curious as to what would work as well because when I got my evo 3d last year I had the exact same question. In the end I just went with a Surface combo and purchased a TPU case as back up. It Just to turned out that the TPU case fit perfect in the Seidio Surface holster. I liked the combo so much, I am doing the same for the Evo LTE, Diztronic TPU with Seidio Surface holster.
Click to expand...
Click to collapse
Rough measurement of the commuter with my tape is 5.5"x3"x.5". I may have to order an active case and make it work
Sent from my EVO LTE using Tapatalk 2
good idea. thanks.
Just wanted to share my diztronic case with surface holster setup
To show that hybrid combos are.possible
Sent from my LS670 using XDA
Just ordered Seidio ACTIVE Holster from sfplanet on ebay (is cheaper than at there own website) for the Otterbox Commuter it should fit I tried the Seidio SURFACE Holster (Platinum) at best buy and it didn't fit by a only a tiny bit because of the sides so I really think that the Active is going to fit so I'll keep you guys updated as soon as I get it.
Isn't wearing a 4.7 inch phone on your belt a bit much?
Sent from my EVO using XDA
shook187 said:
Isn't wearing a 4.7 inch phone on your belt a bit much?
Sent from my EVO using XDA
Click to expand...
Click to collapse
Some people ask isn't a 4.7" phone a bit much. Some can't have the phone in their pocket all the time. I need it on my belt for work. Phones in pockets in construction is always a bad idea
Sent from my EVO LTE using Tapatalk 2
This is a lte ommuter inside one of those reiko otterbox knock off holsters
Sent from my EVO using XDA
Hhhhmmmm. I wonder if that would work with a little heating and bending on the bottom edge
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Hhhhmmmm. I wonder if that would work with a little heating and bending on the bottom edge
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
Its not as bad as it looks in pic. Before she gave me her evo it actually snspped in easy. That lip actually bends easy but when that
Things in that holster trust me it aint comin out
Sent from my EVO using XDA
U can get em on ebay im not sure how much. We bought her commuter from a local flea market. That clip gos to the reiko case but when she saw it fit we offered em.5.bux and he gave it to us
Sent from my EVO using XDA
crzycrkr said:
Some people ask isn't a 4.7" phone a bit much. Some can't have the phone in their pocket all the time. I need it on my belt for work. Phones in pockets in construction is always a bad idea
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
For wearing my phone at construction sites i've used this:
http://www.occidentalleather.com/product.php?sku=5068&type=
I modified it by lining it with neoprene. It is ugly and not stylish but will protect your phone short of it getting crushed. The inside is unlined leather so you may want to line it with something. It is very heavy duty and has lasted me since I bought the original EVO. Only reason I've bought another is due to the new evo not fitting with the defender case. Comes in black and brown.
jkawamura said:
For wearing my phone at construction sites i've used this:
http://www.occidentalleather.com/product.php?sku=5068&type=
I modified it by lining it with neoprene. It is ugly and not stylish but will protect your phone short of it getting crushed. The inside is unlined leather so you may want to line it with something. It is very heavy duty and has lasted me since I bought the original EVO. Only reason I've bought another is due to the new evo not fitting with the defender case. Comes in black and brown.
Click to expand...
Click to collapse
I prefer the clip type so i can get the phone in and out quickly
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Some people ask isn't a 4.7" phone a bit much. Some can't have the phone in their pocket all the time. I need it on my belt for work. Phones in pockets in construction is always a bad idea
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
I would just go with the defender combo. I am a mechanic and that's what I use. It's also not that bad on your belt not much more than the 3d. The seidio active is a good compromise for bulk and protection that's what I used on my 3d. I just like that the defender leaves the kickstand exposed.
Sent from my EVO using xda premium
Just got a new Evo 4G LTE after my trusty OG 4G usb port broke this weekend. I got the Sprint Car Dock and trying to find a case that works with it. The description on the case says it fits 'most' cases but doesn't have any tested cases listed. I tried the Otterbox Defender case and it was just a bit too thick in the middle to fit into the case.
For those that have this dock, what case are you using?
edboston said:
Just got a new Evo 4G LTE after my trusty OG 4G usb port broke this weekend. I got the Sprint Car Dock and trying to find a case that works with it. The description on the case says it fits 'most' cases but doesn't have any tested cases listed. I tried the Otterbox Defender case and it was just a bit too thick in the middle to fit into the case.
For those that have this dock, what case are you using?
Click to expand...
Click to collapse
Any TPU case should work. I'm using one of the cruzerlite androidify TPU cases. And it still had lots of wiggle room so I added the included foam pads in to make it fit perfectly.
the Otterbox Comuter series worked ok. i like the car dock. Works real good. and that new car dock interface is awesome
The Dizitronic TPU case works. The Ventev Edge case DOESN'T work in the car dock.
reverepats said:
the Otterbox Comuter series worked ok. i like the car dock. Works real good. and that new car dock interface is awesome
Click to expand...
Click to collapse
Does that unit have the flap over the usb port like the defender case? If so, what did you do about it?
Sent from my EVO using Tapatalk 2
Yep look for my post on otter case mod
found it http://forum.xda-developers.com/showthread.php?t=1706340&highlight=otter+car+dock
Sent from my EVO using xda premium